Mishima Mastery: Hitbox/Leverless Guide (Tekken 8 Tutorial)

[@Chris_F]

YES, these setting are tournament legal. I did a lot of checking to make sure before posting this video. Now go hit ‘em with some WAVUWAVU!

[@Zangrievance]

It’s not going to stop people from judging you. These are cheater boxes.

[@Chris_F]

It’s 2024 we are past the days when everyone plays on stick. More options = more players

[@Isozoldyk]

@@Zangrievance if it wwas cheat box people would surpass pro player stop crying get good its that simple

[@Miarespammer]

still we dont have any champion or any top player going very far with hitbox or crossup, cross up is there and don't know someone who is breaking the game with it, maybe rangchu and super akuma comes to my mind, but both players quality is more than the control they decide to use, is their personal talent and training that put them there.

[@hiraprxc]

​@@Zangrievanceits not a cheatbox lmao - by your logic, pad is a cheatbox too because of how fast t is

[@bowsrcs]

I noticed when setting up my own layout that with the settings described at the beginning of the video, you're not actually sending both analog and dpad inputs to the game. That "Left" or "Right" in the Pin Mapping menu is just the generic version, which gets sent as whatever you set the D-Pad Mode to in the Settings page. So you just have two buttons both mapped to the left analog stick directions. If you want your controller to actually do both, there's more you need to do. 1. In the Settings page, set the D-Pad Mode to either D-Pad or Left Analog Stick. Doesn't matter which you choose, just remember this for later. 2. In the Pin Mapping page, instead of setting your extra buttons to Left and Right, set them to *DDI Left* and *DDI Right* 3. Finally, in the Add-Ons Configuration page, scroll down and enable *Dual Directional Input*. Set the Dual D-Pad Mode drop down to the opposite of what you set in the settings page, and set the Combination Mode to None. In the in-game Button Mapping page, if you click the "Check Button Input" option you can test your inputs and see if you got it set up properly. One thing to keep in mind with this, however, is that the SOCD doesn't apply between both input types. e.g. If you hold Left+Right on your main directional inputs, then press Right on this extra DDI button, you'll get Right instead of neutral. I haven't had any issues due to this yet, though.

[@MegaWilliamDeth]

I noticed this myself, and did the same as you explained when i didn't get the same inputs as shown in the video by follwing it. But by having it in d-pad mode and ddi left analog/right analog, i still dont get the easy wavedashes and kbd's, but i guess thats fine sicne it feels a bit cheap imo. Still great for electris tho either way you set it up

[@katze9912]

Could you explain why this distinction matters? As in, are there pros and cons to what you’re describing vs what the setting the video describes

[@bowsrcs]

@@katze9912 This setup mimics the inputs you have on a pad (dpad + stick). While I'm not familiar with tournament rules, I see this as the most likely setup to be legal, since the game will see the buttons as two distinct inputs. A keyboard can already do this in the in-game button mapping menu, so doing it on a leverless isn't much of a stretch in my eyes. It is still mapping an analog input to a digital one, though, so I wouldn't go using it in tournaments without double checking the rules first. If you don't plan on ever competing, then this distinction doesn't matter. The setup in the video is arguably better since you gain full benefit of the SOCD cleaning on both buttons, rather than it only applying to inputs of the same type.

[@katze9912]

@@bowsrcs makes sense, thanks!

[@Chris_F]

Wish I was as knowledgeable as you when I made this video!

[@gibbyneutron1433]

I literally coudnt electric at all and then in a hour I hit 7 in a row with the new binds thank you so much!

[@Chris_F]

Love to hear it! My pleasure bro now go dab on em with the electrics

[@JeanClaudeBalam]

Just remembered today about your layout and been trying it for an hour or so, kinda awkward at first but definitely the left hand feels more relaxed this way

[@tikilinde407]

The button movement mapping really helped me with ewgf thanks.

[@Chris_F]

Great to hear!

[@IceManP23]

How do you map your buttons like that?

[@noiner3135]

Thank you 🙏 as a new Mishima main I was looking for this vid

[@Chris_F]

Glad it helped!

[@TrxstNxneTK]

Just got this hitbox in this video and ngl when i stumble across this vid im finally reaching my potential of becoming a sweaty mishima thanks man for getting into hitbox

[@Chris_F]

Glad I could help!!

[@TrxstNxneTK]

question how do i set my analog stick to my dpad every time i do it will not work

[@SunderStormK]

You can do socd for pewgf, not really that useful but it's there. frame 1: f frame 2: b frame 3: d+f(analog)+2 Alternate input frame 1: f frame 2: d+b frame 3: f(analog)+2 The first input cannot be done out of dash or cd but the second one can. The benefit of this method is that you dont have to release any buttons to input ewgf, aiding in speed and reliability

[@klululul7638]

thanks for making this video ! i just start to learn a second character btw kazuya and Jin and after 1h i finally land 5 electric randomly in a row but with standard config ( i'm still struggle on switching bind key with my other character (nina ) haha ) ! Now need to land 10 in a row each day on P1 then P2.... Thanks again for this video !

[@Chris_F]

Nice work and good luck!

[@Luckyencounteryt]

Dude thank you so much this changed the game for me with ewgf!

[@Chris_F]

Glad I could help!

[@joe7park]

This is so helpful. Thanks for the vid!

[@Chris_F]

No prob! Thx for watching

[@ryanknight7200]

How to a map analog to buttons

[@Bigboilacroix]

This is one of the best gaming channels easily

[@Chris_F]

Thank you so much!!!

[@heroicsquirrel3195]

Great video, i mapped L1 to down a week ago because that way i can kbd while keeping my fingers perfectly over the attack buttons but i never thought to try this other stuff

[@Chris_F]

Let me know what you think of my method, curious to hear your feedback!

[@heroicsquirrel3195]

@@Chris_F just waiting on the haute m to arrive then ill test it

[@Chris_F]

@heroicsquirrel3195 did you go with the M16 or M13?

[@RMR999KSA]

thanks for the guide now i do 2 ewgfs on hitbox slowly but surely i can do 3 like i used to on controller great video

[@Chris_F]

Glad I could help!

[@every_kyle]

Awesome showcase, I've been in the market for a more travel friendly option compared to the OG hitbox and the extra buttons for EWGF and DI in SF6 are a bonus!

[@Chris_F]

Can’t recommend this controller enough! I have a review video up as well so check that out if you need more info

[@every_kyle]

@@Chris_F I ordered my own after the review. It's time to grind and get good with it!

[@howaboutdat]

Any chance you could do a breakdown of your button layout for the t16 & how to program it?

[@Chris_F]

Yes once I recover from being sick 😷

[@howaboutdat]

@@Chris_F awesome, as someone who isn’t computer savy at all, it’s confusing hell 😅

[@javialeon]

Nice content bro. I do this same thing with a slightly different configuration. I mapped the left input to the button above the two punches for easy 2p side mechanics in general (not just mishimas) but it was getting hard for me to do wave dashing + ewgf with the SOCD method you explained in a previous video. No problem with 1p side, everything is easy without having to setup extra buttons. I will try this new method on a second profile to see how it goes.

[@Chris_F]

Let me know what you think of the new settings!

[@Yannick.S]

I would like to see this guide with the setup you use! Like you said using the buttons above ounch and beneath kick. Sometimes i have no idea how to place my fingers 😂

[@BlazingAmber]

This is a crazy guide, thanks for releasing this. Any plans for making a guide for 16 buttons?

[@Chris_F]

Thanks! I’m sick with corona so I won’t be posting anything for a few more days. It’s been a rough week 😞 Having said that, if you know how to set it up for standard buttons I’m sure you can figure out how to get it going for 16 even without a guide!

[@BlazingAmber]

@@Chris_F That’s all good, I’m happy with my Haute42 T13 anyways and just thought I’d ask about for the 16 button variation if there’s any more ways to make certain inputs easier ! But I hope you get better Chris, can’t wait for more Tekken content!

[@Sanazuki]

Hi sensei at 1:35 the mapping of the left analog stick right and left were they done in game?

[@Chris_F]

Not in game, on my controller with a GP-2040 PCB

[@Miarespammer]

ordered one already, great video!

[@Chris_F]

Hope you enjoy it! Let me know what you think bc I’d love to know! It’s been a long time since I was this happy with a new controller

[@mrlyles2002able]

I ordered a Haute42 T16. Can't wait to get my hands on it.

[@Chris_F]

Let me know what you think once you try!

[@ynadmiranda1631]

I have the same haute model, how did you map the buttons? I need help 😅

[@mrlyles2002able]

@@ynadmiranda1631 I haven't changed any button mapping. Not brave enough.

[@imnotdirtydan4113]

@@Chris_Fdo you need a converter for the haute on ps5

[@yasser2879]

Good job Chris you really helped us with those ideas you have my like 👍 ❤

[@Chris_F]

Yay! Thank you!

[@justinm7119]

Completely new to leverless, might be a silly question but could you show how to get your button layout on steam?

[@Chris_F]

I’ll put together a KZbin short for this

[@TheyDontKnowxx]

Hello! On the Haute configuration my board is set to change pins instead of assigning action to a specific pin, making it impossible to assign two buttons for the same action, any idea why this is? . Great video im really glad that someone did a tutorial with the same stick i got

[@Antie97]

I had to update my firmware to get the new pin configuration menu. They have a tutorial on the haute42 website under the support section.

[@KraftyMattKraft]

Good stuff, my man. Thank you.

[@Chris_F]

You bet! Thanks for watching

[@haschwalthall]

How to do board can use steam controller settings to map the left analog stick to a face button.

[@seannolan3927]

ive been begging for a hitbox style cross up that doesn't use the awful layout of the cross up. holy shit, im sold!

[@platnimsoap]

hey could you make a quick vid on how you would imput the commands on with top and bottom buttons?

[@LarryBoehrt]

My settings doesnt look like your settings so i cant bind left analog Stick to pin 18 as you showed in min 0:56 😢 do I have to Update something?

[@Chris_F]

Update the controller firmware! Should be 0.77 IIRC

[@nuto6738]

hey thanks. I just don't get why the ps4 input/left analog thing is necessary ? if you stay in d-pad and xinput mode you can still bind left and right to pin18 and pin19. Am I missing something ?

[@ryanman658]

I don't think xinput mode allows multiple direction binds to the same pin

[@Chris_F]

More of a technicality to make it tournament legal

[@De4dSilenc3]

So what are your inputs on your 16 key hitbox, since I also have one? I assume the standard Button Layout and then the left Dpad above of X and Y and the right Dpad under A and B. Is that right? Thank you in advance.

[@Chris_F]

Yup, I use those buttons you mentioned. I like to use the button next to RP for LP+RP (to break throws) and the button next to RK for heat burst

[@balladin9200]

@@Chris_F I thought that the buttons next to right punch was forward and next to right kick was back, do you not use those to kbd/wavedash?

[@mottekeeee-qp1lk]

hi, could you clarify how you assigned analog sticks to the buttons, in the web configurator I only see pins for the dpad and standard buttons

[@Chris_F]

I’ll have this out shortly

[@mottekeeee-qp1lk]

​@@Chris_F ah thanks for fast answer :D I already found the answer on reddit, but I think it will be useful for others, it's not as obvious as it seems​

[@chroma2241]

@@mottekeeee-qp1lk Hey! Could you help me find that reddit post? I can't seem to find an answer, thank you

[@dawg8183]

up

[@uchihayui]

How do you map that on steam? Or even on the hitbox config? I tried and I coun't get any diagonals. It moves left and right but when I press the button with the down button it gives one of the two inputs.

[@Chris_F]

What controller do you have?

[@psuedotoxin]

so button above lp or 1 is for right direction and button below lk or 3 is for left direction what buttons do you guys have for 1+2/3+4 heat and rage bind?

[@Chris_F]

1 2 1+2 1+3+4 (Bryan taunt) 3 4 heat super

[@psuedotoxin]

@@Chris_F ah i see. im a kaz main so i opted for 1,2, 1+2, 3+4 3,4, rage no bind i got my heat binded to the button on left of up button. not sure if its a good placement on not.

[@kamdripzz9349]

So how do I get these setups on my hitbox, I have the exact one you have, but I’m only one ps5

[@Chris_F]

Same settings as what I have in the video but you’ll need a ps5 adapter to connect your controller

[@ali.3834]

i have the haute42 and play on ps5.. what is the setting i should do?

[@Chris_F]

Through the haute 42 settings, same as me and it’s in this video

[@ali.3834]

@@Chris_F done thanks

[@LimitlessBandzz]

can someone tell me whats the difference between setting it on dpad mode on left analog stick. I never did that and went straight to pinmapping. It still works fine but dunno if it messes anything

[@Chris_F]

For casual play there is no difference, but you need to do this if you enter tournaments. You cannot have double inputs (ex: two dpad buttons) in a tournament so you need to set the extra input to either dpad or analog stick

[@Duks66]

absolutely game-changing setup for KBD and electrics. mapping left and right on 8 and 12 works pretty great but I'm curious what buttons you use for left and right (from the haute 16 button layout)? i have a regular m16. thanks a lot for ur guides, really underrated!

[@Chris_F]

Glad you liked it! I’m suuuper busy with M Bison stuff so let me get back to you since I can’t recall my settings off the top of my head. Get back to me if I forget to replay (but I’ll try not to forget!)

[@Duks66]

@@Chris_F no problem sir. have fun on SF6! do you know if there's a way to remap buttons on fightbox/hitbox/arcade style leverless? i have a fightbox f1 and the m16

[@Lordgenichiro]

When I press the forward button, the game shows me as if I pressed it multiple times, even though I pressed it once. How can I solve this problem?

[@Chris_F]

You might have a controller issue

[@bedirhansili5222]

where we can get the layout

[@Pollokyn]

How do you do electrics and hellsweep with your layout (button above 1, 2 mapped to left dpad and the button below 3, 4 to right dpad)? You press with with your thumb or what? D: I got a t16 and Im interesed in trying your layout D:

[@Chris_F]

1P electric is F, N, D (left hand) then right thumb (F) and right middle finger (2) 2P electric is F, N, D (left hand) then right middle finger (F) and right ring finger (RP)

[@Ismi2002]

Thanks so much for your reviews i am waiting now for my m16 plus But i didn't understand how i set it for extra buttons?

[@Chris_F]

Check out this video I made, it’ll show you what to do! Haute 42 Pin Mapping Guide (SF6 and Tekken 8 controller settings) kzbin.info/www/bejne/qnfEo4SiipiMZrs

[@haschwalthall]

How to do the left mapping

[@oceanbijuu]

Thanks for the great vid. I have a traditional hitbox setup / binds and have been experiencing strain on my left hand playing Mishima, Going to try your binds and see if it helps! You referenced hitbox crossup in your video; Have you ever tried one out? Im curious if that might make it even easier on the left wrist to use a stick + inputs, but I don’t have any way of trying it out unless I buy it. Thanks again for the great video!

[@Chris_F]

Glad it helped! I don’t own a crossup controller but I have tried it. I think it’s worth looking into if you are experiencing pain with a regular leverless controller

[@oceanbijuu]

Thank you for the reply! If you don't mind me asking, what was your impression of the crossup? I have never used an arcade stick (only played KBM games), so I am a bit hesitant to drop $300 on it and can't test it first IRL in my area. Just trying to gather as much info as I can to know if it is worth ordering for me. Thanks again

[@Chris_F]

@oceanbijuu don’t spend 300 on this, the PCB is cheeks. Either build your own with a GP2040-CE board or buy the controller I have for $90 USD

[@oceanbijuu]

Thanks for the advice; I'm very new to the FGC. I don't have any knowledge on building my own hitbox. Would the Haute 42 T16 (I watched your review :D )be your recommendation as the best hitbox to purchase above all else? I have a good budget to work with, so I am not as concerned about the price; just quality. Thanks for taking the time to help me out in the comments. Really appreciate it.@F

[@CrosslifeIDN]

How can I get this pad setting with fight box F1 leverless? It is possible?

[@Chris_F]

I don’t know what board it uses, but it’s impossible if it doesn’t use a GP-2040

[@CrosslifeIDN]

@@Chris_F damn i check it, my controller not having it, if i buy brook UFB will it work?

[@CrosslifeIDN]

I'm using steam layout RightNow, but if I come to offline event for sure I can't use this steam layouts

[@Chris_F]

@CrosslifeIDN no unfortunately. It has to be a GP-2040 board

[@Chris_F]

@CrosslifeIDN that’s why I think the haute42 is one of the best leverless controllers on the market right now

[@breakr16]

Game changer. Thanks dude

[@Chris_F]

Happy to help!

[@officialwalmartgreeter]

Hey man! Great vid! What’s the music you use at 2:55 btw???

[@Chris_F]

Oh man I can’t remember the name but it’s from a jason sanders mix on KZbin

[@officialwalmartgreeter]

@@Chris_F I’ll be on the hunt 🫡. Please lmk if you find it, I love vapor wave!

[@aak9776]

just got tekken 8 and found this video, this feels like im cheating lol, it makes electrics so easy, not complaining though, i love it.

[@senX]

i bought the haute42 m16 and im trying to emulate your settings. im on pc, so i put the d-pad mode to left analog too, but on pin mapping i only have left/right and ddi left/ddi right (no idea what ddi stands for). i don't get the same settings as you where i basically have 2x left and 2x right input

[@senX]

so you put in on left stick, so the controller native left right up down buttons are mapped to mimick stick inputs. it works for me, but i have no way of binding dpad left/right anywhere then. when i go into tekken8 button mapping and check keys, it just looks like i bound 2x leftstick left and 2x rightstick right inputs. what am i doing wrong? :

[@Chris_F]

Sorry I’m not at home right now but I will get back to you

[@Dand848]

I can't seem to get my hitbox to do the left or right with the extra buttons. I followed the beginning steps but when i try it in game it doesnt want to work. ANy help?

[@Chris_F]

Did you update your firmware?

[@OnlyCommentPoster]

I'm completely new when it comes to FGC peripherals. How do I use a pico board for the leverless like you did? Or is the Pico baord already inside every Haute42 product?

[@Chris_F]

It has a pico (GP2040) inside

[@prancerjohnponce6889]

Hi Crhis! I hope you will reply. I bought S16 and im having so much fun using it thanks to you. I can do electric like 19/20 times without an issue. Thanks to your guide. I was able to master wavedash into electric side step electrics.dash electric. back step and so on. double electric is not an issue on p2 side(right) but on p1 side. But I started to notice something about doing 2 consecutive electrics on Player 1 side. (left) first electric is always ok. But the 2nd one is inconsistent. And for some reason I'm 100% sure im pressing the same button. but the input showing on my screen like 80% of the time when I do the 2nd electric on p1 side is F D DF+2 no neutral. I was able to get electric. but sometimes just DF2 move not the electric. I can't understand why it's happening on p1. but not on p2. On p2 side. 2nd electric is F N D DF+2. but again on p1 it's inconsistent and most of my input on 2nd electric is without Neutral

[@Chris_F]

I think it’s just a timing issue, try doing the input either a like bit delayed or slower

[@prancerjohnponce6889]

thanks for the reply. i will practice more.

[@prancerjohnponce6889]

@@Chris_F bro. good news. its now consistent. before i'm using dpad. then left right on the extra button. but when i change it into left analog. its more consistent.

[@prancerjohnponce6889]

@@Chris_F bro. good news. its now consistent. before i'm using dpad. then left right on the extra button. but when i change it into left analog. its more consistent.

[@deathcare]

Do you think you could make a short video detailing the same techniques but with your 13 button layout? My T16 is on the way and I've been looking for all the different ways people use the additional buttons so I can try to figure out how I would like to use them.

[@Chris_F]

Great idea! I’ll make a KZbin short about this

[@hydra6391]

@@Chris_Fwould appreciate this too 😊

[@916Tray]

can this be done with the razer kitsune? I am trying to do this but i cant figure it out. I'm playing on steam

[@Chris_F]

I don’t think so, this must be done with a PCB that has pin mapping enabled which the kitsune does not

[@michealkelly9441]

About time someone did this!

[@Chris_F]

I was surprised no one did!

[@TheSenSeTime]

Do you know if is possible to change to thee same layout on the razer kitsune? I know is possible using steam, but I want like in board memory

[@Chris_F]

No, it’s not possible afaik. That’s why I didn’t buy a kitsune, along with the fact that it only has 12 buttons

[@ElijahSantos61]

I have the razer one, how would you copy your mapping into the steam controller profile?

[@Chris_F]

Sorry it’s been months since I tired so I don’t remember. I’m a GP-2040 boy all the way

[@craigbowen9995]

Thank you very much for the help I can now do normal electrics consistently. But I can't understand your instructions for the PEWGF aren't you just doing the same input as EWGF just faster? If you could clarify the difference between the two I would greatly appreciate it.

[@Chris_F]

But of a common misconception but the inputs are not the same. A regular EWGF that all mishimas use is F, N, D, D/F+2. PEWGF can only be done by Kazuya and Reina in T8; the input is F, N, D/F+2 Check my inputs in the video

[@leftbrain3834]

hey how can i do this on steam i got the razer kitsune and cant seem to get it working

[@Chris_F]

Might not be possible on a kitsune. I don’t own one so I can’t test, sorry!

[@Ookie_FC]

How do you map right analog stick right and left?

[@Chris_F]

Check my pin mapping guide for how to do that Haute 42 Pin Mapping Guide (SF6 and Tekken 8 controller settings) kzbin.info/www/bejne/qnfEo4SiipiMZrs

[@mazenyasser7208]

How would you do that on a Keyboard? I know it should be similar but the button layout on a keyboard is way different, I currently use a WASD and a mirrored WASD on the right side for attack buttons.

[@Chris_F]

Not sure since I’ve never used keyboard for fighting games. If it doesn’t have SOCD settings available then this method, as is, won’t work

[@josephjoestar995]

As I also have a T16, is there any benefit of mapping the left analog to above and below the left punch/kick over what you used in the video?

[@Chris_F]

It really comes down to preference. I’ve been experimenting with some different placements but I haven’t settled on anything yet

[@balkonee]

My question is how would this work for locals. Most are run on a PS5 and so it has me wondering if u use a converter (i.e a Brooks Converter) does the PS5 recognize the device as a controller and will it understand that the pins are different directions. Its hard to put into words, but if i take my Haute leverless with a brooks converter to a local will it remember all of the settings that are on the controller or would i have to change the settings on the PS5 which i feel like most people would find issue with.

[@Chris_F]

So the RP-2040 board in a haute runs on two processors. The converter runs through one, and your main settings/inputs on the second. There is NO need to reset/reconfigure your settings as long as you set up everything properly! I used these exact settings on several PS5 consoles at evo japan with no issues at all

[@balkonee]

@@Chris_F Thats awesome. Thanks for the vid. Ur content is dope and i love seeing all the tips and tech videos u do. 100% has made me a better fighting game player. Cheers.

[@Ismi2002]

In the pin mapping there is no left analog stick choice

[@Chris_F]

Update your firmware. You have to enable left analogue input in a different menu

[@Solid-Matrix]

Nice, I have a g16 Haute

[@Chris_F]

Try it out and let me know what you think!

[@Solid-Matrix]

@Chris_F I definitely will

[@Solid-Matrix]

@@Chris_F So i gave it a try and I was happy with how easily electrics came out.Ty for this vid!

[@GammaBeastBoy]

is the 16 button controller with this good for non mishimas or no? debating between a 13 button and a 16 button I'm worried about the extra buttons getting in the way.

[@Chris_F]

Good for non Mishimas too. If you find that the extra buttons get in the way, you can just disable them in the controller setup menu. IMO, better to have and not need than to need and not have!

[@joe7park]

Hey Chris were you able to play with these settings in a tournament? Curious how tournament mods think of this setting on a leverless.

[@Chris_F]

This is 100% tournament legal, and I’ve played in TWT events with them. I wouldn’t have posted the video if it wasn’t OK

[@joe7park]

@ awesome! so glad to hear that, thanks

[@XaverZielinski]

can someone explain the layout i dont get it off of his explaination

[@imnotdirtydan4113]

I’m looking to get a haute t16 for my ps5 what issues would I run into if I get it? I heard that I would need a adapter or something

[@Chris_F]

You’ll need to a) update the firmware b) buy a ps4->ps5 USB adapter

[@Twice_Marvel]

Would you put left analog stick on the above or below button?

[@Chris_F]

Personal preference really

[@antsoswag]

So for 16 button controller you use the top button as forward and the bottom one as back?

[@Chris_F]

That’s what I do. You can set it to whatever you like!

[@harman4775]

im following all the steps and for some reason the buttons still are not mapping correctly and my up/down/left/right doesnt work in game

[@Chris_F]

Which version of the firmware are you on?

[@shantheman9922]

Why change the inputs to left analog stick instead of another dpad input? What does that change?

[@Chris_F]

Having two buttons control the same input isn’t tournament legal. By setting the right hand buttons to the analog stick we avoid that problem

[@shantheman9922]

@@Chris_F so it's a loophole? Why is that even a rule?

[@YamatoFGC]

Can you make a video for ps5 only because we don’t have button map :(

[@Chris_F]

Sorry, I don’t own a ps5 so I can’t capture footage for that. From my research, I think the only way you can do it on ps5 is with a GE2040-CE pico board, edit pin mapping through the controller menu on a computer, and then connect a brook ps4->ps5 converter to your controller

[@YamatoFGC]

Ah man that sucks but great video regardless and thank you a lot for the help

[@Chris_F]

No worries bro sorry it doesn’t work for you

[@mor1420]

@@YamatoFGCwhat controller do you use?

[@twistedmainframednb]

I'm having the same issue.we need a ps5 guide

[@CalebAdams]

Can you change your Left Stick controls on console or is it only for PC?

[@Chris_F]

Has nothing to do with pc or console and everything to do with your board. This won’t work on a razer kitsune for example

[@okvngel]

How do i do that layout on the official hitbox? Anyone know how?

[@88drezden]

You would have to drill into your box to add the buttons.

[@yasser2879]

Can you help me on how to do iwr 2 dragonov move that killing my I don’t know how to do it consistently

[@Chris_F]

I don’t play him but let me try and I’ll get back to you

[@dannymoonstarr]

great video

[@Chris_F]

Thanks!

[@haschwalthall]

Bro how to do the left mapping settings please

[@Chris_F]

Check this video Haute 42 Pin Mapping Guide (SF6 and Tekken 8 controller settings) kzbin.info/www/bejne/qnfEo4SiipiMZrs

[@haschwalthall]

@@Chris_F thx🔥

[@MooGoesCow]

I have the same controller, what is your exact layout?

[@Chris_F]

Top button is left Then 1 2 1+2 1+3+4 (for Bryan’s taunt) 3 4 Heat Rage art Right

[@coffee_creamer5470]

Im on ps5 but i the button mapping tab for the ps5/xbox controller is not in my settings

[@M0J0SD]

I don’t think this feature is available for PlayStation users unfortunately

[@coffee_creamer5470]

@@M0J0SD damn i bought a snackbox and everything

[@atakan.v2]

Does it still work when you set your socd as up+down=up ?

[@Chris_F]

I didn’t test it but I would assume it does

[@DragonthornX]

Btw are these settings applicable/allowed for tournaments? I think you're not allowed to map the same input for more than 1 button.

[@Chris_F]

It is legal! I didn’t map the same button, I mapped the left analog stick and the dpad to my controller, which is the same thing you can do through the in-game menu with a PS4/5 controller

[@yenhyun1190]

I don't know what I'm doing wrong but the settings are very confusing. I can't map my rightside UP and my rightside Down (Haute42 T16) buttons.. I'm doing something wrong..

[@Chris_F]

Are you on the newest firmware 0.77?

[@yenhyun1190]

@@Chris_F I found a reddit post that fixed the issue for me. Still thanks for trying to help. Keep up the sick content.

[@CouncilOfTheWolf]

I'm using this on PS5. There's a touchpad button that you have to press to reset in practice mode. Do you know how to do that?

[@Chris_F]

Sorry, I don’t own a PS5 so I don’t know. I’d ask on their official discord bc everyone there is very helpful!

[@CouncilOfTheWolf]

@@Chris_F No problem, thank you. Turns out one of the top right buttons is already dedicated to that lol.

[@Gabzilla27]

Yes! Love this!

[@Chris_F]

Thx!

[@ryanman658]

Did you have to update your firmware? I have the same device but my pin mapping page looks much different

[@ryanman658]

i.imgur.com/BkNcDNu.png

[@Chris_F]

Yes I did, I’m on the newest firmware

[@nevermore5216]

@@ryanman658 Did you figure it out mine looks like that too

[@Chris_F]

Update your firmware

[@nevermore5216]

@@Chris_F Thank you

[@fall7778]

so if i have to remap through steam, how would i compete in tournaments that r 99% on ps5..?

[@Chris_F]

Not possible unless you have the same board as a haute42.

[@fall7778]

yeah i have been looking into it the last hour. i currently have a snackbox micro, but the haute42 t13 looks good and i really like the open source aspect of it. do you think its worth picking up? it’s pretty cheap rn

[@Chris_F]

@fall7778 incredibly worth it. However, I recommend the 16 button version because you can always disable the extra buttons if you don’t need them. Better to have and not need than to need and not have. Feel free to ask me any questions

[@fall7778]

@@Chris_Ftrue, i’m someone who loves art on my controllers so that’s the main reason haha. r the buttons big? i’ve heard they r bigger than most and that might be a problem for me ngl

[@Chris_F]

The T series has enough space for custom art, and you can find templates on the official haute42 discord. The buttons are all 30mm buttons but it only took me 5-10 minutes of practice to get used to the size. IMO it’s a non-issue

[@ivanderalers3591]

Are ther buttons mapping settings for the ps5?

[@Chris_F]

The platform doesn’t matter, the controller does. These settings are for controllers with a GP2040 board

[@iswamii909]

i have a razer kitsune, how i can remap the button i want via steam?

[@Chris_F]

So in steam you’ll have to go to big picture mode, turn on steam controller settings and then go to “edit layout” in controller settings

[@iswamii909]

@@Chris_Fi dont know if im doing something wrong, or simply the razer kitsune is not fit for this kind of stuff when i go on steam on picture mode i can control everything with my razer kitsune, i tried to bind everything to left anolog left but nothing when i open the game every imput remains the same... its been days, i tried many times and you have no idea how much i would love to do EWGD and wavedash with that imput.. it would change the way i play completely... if you can make a quick guide or just explain to me exatcly what i need to change it would be much appreciate ty for your time

[@iswamii909]

forget it... I DID IT!!!.. i dont know how but i did... i love you

[@shrikeroy6111]

Okay this setup is actually brilliant lol, true Crossup style leverless advantages You mentioned that on your personal layout you had the second set of movement controls mapped to the bottom and top "extra" buttons on the T16. Got mine after I saw your video a few weeks back and it'd be cool to see another video or maybe a short of you doing some of these using the T16 extra buttons. Why do you prefer using those compared to the normal ones you showed in this video? Curious

[@Chris_F]

So glad you like it! TBH I thought I would get a lot of angry comments about this which is why I took so long to upload this video. Did a lot of research to make sure that everything is tournament legal and then I decided to just upload it. I stream on twitch! I’ll be streaming Tekken all weekend so check it out there if you want to see me with my layout (link in bio) Short answer tho: I do it my way bc I like to use my ring finger to do 1+2 since throw breaks have a bit of a bug in this game - I have a KZbin short about this so check that out too!

[@PorkBelly-]

Someone explain how to do this in steam controller settings

[@Chris_F]

Big picture mode, controller settings, enable steam controller input, map LS to any button you like

[@NoName-ow5uf]

Can I do this with hitbox on PS5

[@Chris_F]

You mean hitbox the brand? Technically yes, but you’d need to a) replace the board with a GP2040 and b) drill holes for additional buttons

[@isciajones6012]

im on pc but i cant seem to get the KBD to work, it seems to register the directionals as the same button. i seen you never lifted one of your fingers when doing it and it wont work for me, do i need to change my board to ps4 mode like you have it ?

[@Chris_F]

I’m not sure since I’ve never played any fighting game on keyboard. It is possible though. Maybe someone in the comments can help with this. Sorry 😞

[@isciajones6012]

@@Chris_F im on the t16 like you , i didnt mean to phrase it like that, when i change my pins to left and right after putting in in analog mode, im not getting two separate imputs like you are, where am i going wrong

[@Chris_F]

What firmware are you on? It has to be the newest one (0.77 IIRC)

[@isciajones6012]

@@Chris_F its up to date, first thiing i did when i got it , so when im in the web config , you dont say anything but changing to left analog input and changing two pins, is there more that im missing? you are playing on PC right or are you hooked up to ps5 because i see that you changed your mode from xinput which is what it is normaly on to ps4,

[@kech267]

I think you probably didn't save the left analog on the bottom, i think i had the same problem.

[@haschwalthall]

I can’t do the pwgf no matter what i do even i do it easy on ps4 pad

[@jaye9771]

Hello I mapped Ddi left and right but I cant use it :( (xinput)

[@Chris_F]

Did you enable dual directional input in the add-ons menu?

[@jaye9771]

THANKYOU BRO 😭🤣

[@Newlins]

how do i set this up?

[@Chris_F]

Watch my haute42 pin mapping guide

[@wyattcharron1753]

I tried this and it works even better than I could have imagined. The only problem is that I think this kind of remapping is actually banned in tournament. Do you know if that is the case?

[@Chris_F]

Glad to hear it helped! I’ve done my homework, read over the TWT rules, and asked members of the community, and I feel confident in saying this is tournament legal. All this is doing is making what is possible on a PlayStation controller possible on a leverless controller, albeit far more ergonomical/practical due to the nature of the button layout on leverless. I’ll be entering TWT events this year so I makes sure this is legal since I’ll be using this setup