Missing Lines in Epson Nozzle Check? BEFORE you go Bonkers with Failed Print Head Alignments, WATCH!

[@StephanieMPerry]

Just bought a 2803 and ran 8 printer cleanings to keep getting missing segments.. Thank you so much for this video!! The frustration was real 😅

[@arturoibarra1148]

I thought this was to help figure out how to fix the gaps....

[@teresakaiser6662]

How do you fix it if the black web isn’t correct or full?

[@TheEttaGnome]

I was going crazy, THANK YOU

[@JulianLuigiNocamasi]

omg i was so frustrated with missing segments with ma nuzzle check ... but they were just coupple 2-4 and i wanted perfect i wasted alot of ink cleaning but now i see THANKS SO MUCH FOR THIS VIDEO!!!

[@ldmitchem]

So I need to know what to do when my test print comes out with lots of lines!!! PLease help!!!

[@livingthenanalife9943]

Thank you for this video. I was driving myself nuts, or as you said bonkers thank you for posting this and for the CMYK file.

[@jessicamedrano5427]

🎉 you're a big help for this I almost cried cause I had my printer for a year and I love it

[@SB-yg2tr]

Thank you so much for this information!

[@elshiftos]

Thanks for the information! My old Epson has a missing segment in the black pattern that's in the same place every time I run the nozzle check, and I can't figure out what's causing this. Can anyone shed any light on this? Thanks

[@caspercocomonkey2176]

Im in the same boat 😢

[@mlssxjy]

​@@caspercocomonkey2176same 😢

[@isdp736]

WORST case is perfect nozzle check pattern but prints micro white stripes on the images but found out how to fix it so all good.

[@janinafarr6443]

My printer was definitely heading for the window. lol thank you

[@sherriebryan6243]

Thank you so much, i too have those missing lines, have done everything short of power clean. Today i printed a little highland cow and it came out beautiful!

[@ForthearCAIves]

Im having issue with this. My sublimated mugs have yellow marks.

[@reneejurgensen7280]

Does this apply only if you converted the printert to a sublimation one? I have it as a regular ink jet and get my lines vertically

[@L6FT]

What to do if missing lines of yellow persist? I did the automatic nozzle cleaning 3 times, a bit better, but not there yet. I guess I'll do another round of nozzle cleaning tomorrow and see. But what to do if that doesn't work, is it then a new printer?

[@deniseosterberg8536]

Just bought the 2803 today and the cyan and black webs are showing lines :(

[@SherryArmstrong-q6n]

what do you do when you have these broken lines but it prints out prefect, but when your press the image the black has alot of green tent to it?

[@chrisar6068]

Thanks for the file.

[@lyndasmolinsky1207]

Exactly where can I find the spider web download?

[@Kevinmofficial_]

has anyone who experienced missing ink lines ran 10 or more nozzle cleanings? because mine won't go away and I've tried everything to get a nice print and just can't! what do I do!?!

[@LauriesHandiwork]

I happy for those of you whose printers work when they printed their design but mine still has a lot of vertical lines running through it. My printer is less than a year old but it has rarely been use. :(

[@Odolwa2]

strange anomaly today. for nozzle check, there are two BK. on the 1st BK, the very last line is missing 2 bits, but on YMC, for Cyan, (both cyans) it's showing black ink on the last line, missing same 2 bits.. the heck's goin on?

[@billwolverton2556]

Missing lines in the cyan. All the rest are OK. Is the print head replaceable? New printer and lines missing from the first print. It's not likely that Epson will take the printer back since I have converted it to Hiipoo sublimation ink. Any suggestions?

[@RoommateWiLLE]

Ok, I had the issue with he nozzle check and taking your advice. Why does your black in the spider web looks dark and rich?

[@kristyepley3592]

My sublimation printer is an Epson 7720. I've done multiple cleans and it prints with some gaps but when I print on the sublimation paper, I get a pink haze. Any advice on how to correct this?

[@stevewithers3532]

I suspect that when printing on photo paper you’d see a difference. You can clean your printhead. There are plenty of videos.

[@joseaguirre1014]

That is good information, I will enjoy my ET-2720 longer

[@QuickSPI]

Good to hear

[@gweniegomez5031]

I am using a 2720 sublimation printer. Prints are coming out yellow. What can I do?

[@vineetsingh3258]

What's this trick to Check CMYK?

[@beverlymackenzie6058]

Thank you, Thank you, Thank you! Great information, at just the right time! Thank you!

[@QuickSPI]

Glad it was helpful!

[@terrimcmullen1994]

D Where is the information listen to the video no link no steps for fixing it am I dumb perhaps even read through it again??;

[@SerenityGrace71]

What if there are NO broken segments yet when I print the black has missing ink?

[@QuickSPI]

I would try the alignment feature, where you print a bunch of boxes and choose the best looking box (the one with the least amount of lines). If that doesn't resolve, perhaps print speed or choose a different paper type. Also - sometimes if the design is not too large, rotate it in the opposite direction. For instance, if you were printing landscape, print it portrait and see if it prints better. Let us know!

[@alexandralafrance6493]

@@QuickSPI please help ,my printer Epson et4700 wap coming with lines ,I do the head cleaning now the cyan missing when I do the nozzle checks .just bought it 6months ago

[@jaclynramirez3873]

I did this and my black spider wen has a bunch of lines even in the missing segments how can I fix it? I did head cleaning and nozzle check

[@WambuiMadeIt]

Thank you! I was about to throw my printer out too. ⭐❤️🌸

[@missykelly2042]

Hi! I did a nozzle check & yellow doesn’t show up. I also tried doing a purge file & my yellow came out a greenish color. I also try to print turquoise/teal & it comes out blue? Please help!!! I’m ready to throw my printer out the door!

[@Richwitch365]

Keep cleaning

[@janetnava4077]

@@Richwitch365 How much cleaning are we talking? ive been trying to get my yellow to print and it wasnt printing at all like there no yellow on my nozzle check and when i do yellow purge pages it shows up light blue, ive printed about 20 print pages and dont know what else to do. i also have the et 2720

[@richardkonsky]

@@janetnava4077 kzbin.info/www/bejne/fKTFhYtrjdWgi68

[@debmayer-schmitz2140]

Thank you so much!!

[@hopee.5980]

You guys are great! Thank you!!

[@angelicareyes595]

What happens if the pattern has lines in it?

[@veketash]

Just what I was thinking and I'm having, but apparently no help here.

[@ddbryant9888]

So did any one get any answer

[@SawnickSez]

thx

[@grammas_gone_craftyakaleil2062]

This is great information - thank you!

[@QuickSPI]

You are so welcome! Glad you enjoyed it.

[@bhavyakhunt]

mine has only yellow, no red or blue😭😭😭

[@jerrygambone2734]

You can clean your print heads with the "windex and paper towel procedure". You can regain All of the missing and broken lines in your Printer Head Check Print. - See Jose Rodriquez's youtube tutorial. No need to live with missing link lines.

[@debbieingram1100]

I think I love you for this!

[@QuickSPI]

I love you back!

[@carriereppert395]

I had missing lines did a nozzle check and now I have black leaking on my sublimation paper. Can you help

[@brookemallory1901]

Did you ever get it to stop? I have been getting black ink on my sublimation paper too, and I can't get it to stop.

[@tin2698]

It works with that kind of graphics but i print ruled notebooks and epson is making me crazy. It never prints straight lines. There's always a break in the middle. Ive done hundreds of alignment things. I never had this problem with canon. And dust! It accumulates at the nozzles and i couldnt just wipe it with a tissue because i had to unscrew and disassemble everything! Unlike canon i just need to take out the print head and wipe it with a tissue

[@alexandercleary2854]

Thanks for nothing

[@cathyporonskyjr6781]

Idk. It helped me! I was going crazy trying to make the nozzle check perfect for no reason

[@TheMadHatter10-6]

lol!

[@Littlemismartha]

Your colors are so bright for being sublimation why is that

[@KaliBlaz]

all you have to do is clean the print head, there are tons of videos on how to do it, if you gonna throw your printer, i will be glad to take it off your hands.. send it to me :)

[@billwolverton2556]

New printer and the first and subsequent prints were bad (missing horizontal lines).

[@JMEUTEUW]

Such a horrible printer…. Paper alignment issues it says and the paper is aligned!!!

[@jessicarevolver]

literally almost emptied out an entire new XL tank doing the cleaning not knowing that it empties out the damn ink. I have never been able to use this damn printer without any issues.

[@desklight-c7w]

Talk too much unless information.