MITSUBISHI CITY MULTI ERROR CODE TROUBLESHOOTING

[@keovongvilaykeo4799]

Thanks you again always keeps learning every day 🙏👍

[@D2DNYAC]

Thank you for watching my friend

[@johncorley4029]

I would like to know where you got the troubleshooting device that plugs into your computer and where you plug your computer into the unit, still learning. Thanks for the video

[@D2DNYAC]

Look in the description I left a link to videos to answer all your questions

[@thesilentonevictor]

Great video

[@D2DNYAC]

Thank you for watching my friend

[@drewc7479]

Is it possible to troubleshoot the metering where you're getting low pressure ? Or that the transducer is reading correctly I can't see how you have 80 psi coming back on the liquid line but reading 6psi on your service tool. I work on daikin vrv new to them but cool stuff 👍

[@eddiegomez3628]

I want the answer to this too..🤔

[@drewc7479]

@@eddiegomez3628 ya I'm a lil confused on that lol

[@globaltecnicianworldsbest3031]

Okay heat pump mode the metering device (LEV) is now in the condenser that’s why

[@drewc7479]

@@globaltecnicianworldsbest3031 ya but that's what I'm saying..if you have 100 psi on your liquid line coming back to meter and then run through the condenser if I had a transducer reading 6 psi I'd be curious about that metering in the condenser

[@RJMaker]

The service port he is on is before the LEV (Heating mode). The transducer is after the LEV, hence why the transducer is reading lower pressure. There are service ports near the transducers you can use to confirm values.

[@trinito97]

Hey where do go to get trained on this?

[@D2DNYAC]

lol 😂 in the field

[@D2DNYAC]

Where are you located?

[@emmanuelrojas2249]

Hi afternoon good video where can take the Mitsubishi training plis

[@D2DNYAC]

You have to contact your local mitsubishi supplier or representative

[@emmanuelrojas2249]

Okay thank you

[@mattwoodbridge7924]

Awesome video

[@D2DNYAC]

Thank you for watching

[@wd8557]

Good luck in finding that leak, hopefully it's in that unit and not head.

[@D2DNYAC]

Flares lol 😂

[@genriver5287]

How to fix error code 6834 & 6831?

[@D2DNYAC]

RC / remote control/ thermostat not able to communicate with indoor unit, check the RC settings and communication wires between RC and indoor unit, make sure all wire plug connections on board is properly fastened

[@emmanuelrojas2249]

Hello

[@emmanuelrojas2249]

Where I can take the Mitsubishi training plis

[@D2DNYAC]

Best bet is to call your local mitsubishi sales rep and find out