Mitsubishi L200 - timelapse build

/ additionallosses
Intro:
► Music Credit: SUNDANCE
Track Name: "Perséphone - Retro Funky (SUNDANCE remix)"
Music By: SUNDANCE @ / sundancemusic
The SUNDANCE Official Website is HERE - lefthandmusic.fr/
Follow SUNDANCE on BandCamp: sundancemusic.bandcamp.com/
License for commercial use: Creative Commons Attribution 3.0 Unported (CC BY 3.0) creativecommons.org/licenses/...
Music promoted by NCM goo.gl/fh3rEJ
Music:
Music from KZbin Audio Library [Aka YAL]
Music provided by RFM: • Video

[@thehumanslug7606]

Fair play, using the bottle jack for fitting the longs shackles was a serious smart move 👌

[@TERRYCHILIMA]

i own a 2006 L200, and i have seen this video over 10 times, am inspired and i want to build mine in a similar manner

[@AdditionalLosses]

I appreciate it man, good to hear that. I wish you perseverance and a lot of strength to the build

[@francfzx1]

Fantástico trabajo !!! CONGRATULATIONS !!!.

[@AdditionalLosses]

Thank you!

[@ameliebullen9934]

Super work 👍👍👍👍

[@sakarbik7535]

Very beautiful 👍👍

[@Drako9874]

Mega 😎💪❤️ Diamonds are 4ever 😎

[@alexhunter8572]

absolut wild^^

[@e34bmw98]

Gratulálok gyönyörű lett a gép , nagyon ügyes vagy. Nagy vonalakban mennyi pénz, idő míg elkészült autó. Köszi

[@AdditionalLosses]

Köszi szépen. Régen volt már. Mivel ez hobby így sem az időt, sem a pénzt nem tudom pontosan, de szerintem 700 - 1M biztosan rá lett költve, munkaórában pedig rengeteg, nem tudom összeszámolni. De úgy - munka mellett - 1 év egy ilyet megcsinálni.

[@kamazkamaz239]

whou very good job

[@DmgNeville]

Not gonna lie... I will be copying your work with the rock sliders and extended shackles and I will be getting some spacers also. I read in the comments that you made the sliders and shackles yourself, i was kind of hoping you bought them cause my list of custom jobs to do on my L200 or Triton as we call it in Australia... is getting pretty extensive. Cheers for the video mate, really appreciated.

[@AdditionalLosses]

Thank you! Yeah... "built not bought" is a neverending story :-) Cheers

[@ameliebullen9934]

SUPERRRR 👍👍👍

[@JoDa0010]

Nagyon szép ;)

[@mauripellegrini85]

Como funciona el sistema de levantarla adelante ?

[@yuvvraajbeinghuman4730]

Great video man. Thanks, you drilled the chasis for the rock sliders?

[@AdditionalLosses]

Thanks. Yes, I used M13 rivet nuts to the slider.

[@user-zu9it5hp5t]

How many inches it was lifted?

[@shanehollis9841]

Great video! What's the little winch for though?

[@AdditionalLosses]

Thanl you! The winch in the back is for pulling up to the bed body of shot animals (it's used by hunters - I sold the car for a hunter)

[@cristoffbaloc4231]

Great tune! I have an L200 and I was thinking about getting it ready for some exploring. Can you winch forward when you have the winch behind the cab? How is the roll cage fixed on the bed?

[@AdditionalLosses]

Thanks! The winch on the roll bar is just a small one for pulling up small stuff onto the bed. Here, hunters use it to pull up animal corpses. I have a 13000 lbs hidden winch in the front bumper. Into the edge of the bed rivet nuts are pulled. The roll bar has been welded to L-profiles both sides. These profiles are fixed to the edge of the bed through the rivet nuts with screws. There you can check it: kzbin.info/www/bejne/gpe6d4icZs2nfqc

[@cristoffbaloc4231]

@@AdditionalLosses Yeah I've seen in another video the front winch. I've looked at my l200 and it seems I should fabricate a corssmember from some pipe or plate to fix the winch there. Also, it seems that the gas tank is exposed, do you have a plate or some protection over the gas tank? Thanks for the info!

[@AdditionalLosses]

​@@cristoffbaloc4231 There you can check photos about my winch plate build facebook.com/media/set/?vanity=AdditionalLosses&set=a.2333256036785673 I had never any issue with damaging the tank. The frontal face of the tank is protected with a strong plate. The bottom part is unprotected but if you not rock crawling I don't think there's a big chance to damage

[@cristoffbaloc4231]

@@AdditionalLosses Thanks! That's quite a project! Nicely done!

[@duraznov]

Hi, I'd like to copy your side bars/steps. Is there any template available or you just custom-made them or bought them from someone else? Nice job!

[@AdditionalLosses]

Thanks. It's custom. If it helps you, the tube diameter is 60mm.

[@bigcacksmallsack7320]

Hey man nice work. Did you make those fender flares or did you buy them if so where from?

[@AdditionalLosses]

Thanks. These are stock fender flares.

[@mariojerez8628]

great, but how do adapt the foggers?. I have one like it but the bumper doesn't have space for them and I don't know how to place them

[@AdditionalLosses]

You mean the round fog lights, or the square ones on the top of the bumper?

[@milanmolnar8671]

Jó lett ez az autó, kiváncsian várom hogy mit veszel, vagy vettél helyette

[@AdditionalLosses]

Még nincs meg, de ahogy talán már ide-oda írtam/mondtam, dolgozom az ügyön. nem fogsz csalódni azt megígérhetem. :-)

[@adamday7067]

Hi, your truck looks great. Where did you get the extended shackles from, i would like the adjust the height of mine to. Thanks

[@AdditionalLosses]

Hello there, thank you. I created the shackles myself and a friend of mine made the bending on it.

[@adamday7067]

@@AdditionalLosses awesome, thank you. I will have a look at making some then. For the front suspension did you only have to adjust the torsion bar?

[@AdditionalLosses]

@@adamday7067 Yes, I only adjusted the torsion bars. But before that I had to reindex it (release it fully, pull out the ribbed shaft end of the bar from the suspension lower arm, turn just a little bit and push back - works as a pre-load, to reach higher lift)

[@adamday7067]

@@AdditionalLosses thank you so much for this information, look forward to doing the same on mine.

[@alexandros6335]

How did you bolt the bar in the bed? Did you drill the bed? Can you do a video?

[@AdditionalLosses]

Yes, the bed is drilled and plenty of rivetnuts have been pulled into the drillholes. I can not make a video because I already sold the car.

[@DRAINTVofficial]

What's the fuel economy like?

[@AdditionalLosses]

10-11 l/100 km

[@user-if9zx3gm2h]

Good job. What is the size of tyres?

[@AdditionalLosses]

Thank you! 285/75R16

[@mateuszkurpiel6532]

Hello do you have a movie from snorkel assembly?

[@AdditionalLosses]

Hello! No, unfortunately I didn't make movie about it.

[@smallengineguys]

did you have to extend the brake lines for the lift?

[@AdditionalLosses]

No, I didn't have to

[@smallengineguys]

@@AdditionalLosses nice ive got one coming in from japan soon.

[@joshuacroes6118]

How much did you lift the l200 in the front and back?

[@joshuacroes6118]

And how long was the shackel bolt above to the bolt under center if know

[@GuyCalledChris]

Where did you get those side steps been looking for them and can't find them anywhere

[@AdditionalLosses]

I've made it, so that"s why you not find it. As I remember from 60mm tube

[@konstantinoschatzifotiou332]

Can you tell me how many inches are the wheel spacers you installed on the car?

[@AdditionalLosses]

It is 30mm as I remember.

[@sleanzles]

I really like the color on this one. It's not the usual shiny black. What color is this called?

[@AdditionalLosses]

She's not painted, it's vinyl wrap, the color is Metallic Grey

[@ragnar299]

👍💪

[@tagcs.p.5180]

full :-)

[@cornelprioteasa448]

Hello. What model year is this L200? Tx

[@AdditionalLosses]

It's from 2006. One of the last pieces from K74 series

[@imalshaprs]

what the heck did you fit on the right side towards the end?

[@AdditionalLosses]

recovery tracks

[@712Menzies]

What size tyres does it have?

[@AdditionalLosses]

285/75R16

[@rolandsomogyvari584]

Szia , milyen szinű a kocsid? most szeretném és is átfényezni az enyémet és nagyon tetszik a te kocsid színe. azt látom h mat de ez RAL szín ?

[@AdditionalLosses]

Szia! Gyárilag ezüst+fekete. Ez a fólia amit itt a videóban látsz metallic gunmetal satin... valami ilyesmi

[@rolandsomogyvari584]

@@AdditionalLosses koszonom. :)

[@denzellovell8570]

How much did the build cost?

[@AdditionalLosses]

Hard to tell, because I made some parts myself, like the side rails, rear bumper, leafspring shackles, winch plates, roll bar... I bought all other comercial parts online. In the 3 years I owned the car I even spent more than half of the buying cost on it

[@nicoortigoza3208]

What year model is this sir?

[@AdditionalLosses]

2006

[@sortavala4467]

Hello! I'm from Russia. can i find out the number and brand of paint? you have a very nice car. I'm building l200 now.

[@AdditionalLosses]

Hi there, it's not paint. The car was wrapped. I bought the film on Aliexpress. Grey metallic was the color.

[@sortavala4467]

@@AdditionalLosses Hi. how is she in the woods? Scratching heavily, peeling off the branches?

[@sortavala4467]

@@AdditionalLosses looks very cool

[@AdditionalLosses]

@@sortavala4467 My opinion and experience is that it is very durable. It does not tear, it does not destroy, it can withstand bushes and branches.

[@alexeyv.5087]

Wat size of tyres?

[@AdditionalLosses]

285/75R16

[@tobbalinen4348]

what size tire are those?

[@AdditionalLosses]

285/75R16

[@jordanmurray7971]

What was the previous tire size

[@Marley505]

how did you lift the front?

[@AdditionalLosses]

The torsion bar has been tensioned. Check at 1:03

[@Marley505]

@@AdditionalLosses yeah I noticed now, i did additional research. Thank you for replying though, on a 2 year old video!!!

[@i7uch]

Do the car for sale

[@AdditionalLosses]

She has already been sold.

[@jacintarip6499]

how much fo rit

[@AdditionalLosses]

already sold

[@josadarqueborges2196]

Tenho medo de mexer na altura da minha L200

[@AdditionalLosses]

English please, I don't understand what you have written.

[@qunotrack856]

Szupi

[@AdditionalLosses]

Thanks