Mixing SIRAYA Tech Blu with Anycubic Tough gave better results

Mixing Siraya Tech Blu resin with Anycubic Tough resin gave better results on the Anycubic D2 printer. The mix was 50/50. I learned from this experiment that Siraya Tech Blu can be very good for fortifying other resins, for for specialist applications for which it was originally made.
Affiliate links
Buy Anycubic Tough Resin
store.anycubic.com/products/u...
Get $25 off on qualifying purchases at the Anycubic store
store.anycubic.com/?ref=CK
Coupon Code: CK3DPRINT
This video is not sponsored. Purchases made through the affiliate links above generate a commission that support this channel.
#anycubic #sirayatech #3dprinting #uvresin

[@101yen]

I used to print Casio watch adapter using Siraya tech Blu Nylon Black resin when I started my etsy shop, but I got many complains that the adapters broken in short period of time. I switched to Anycubic ABS-like Pro 2, and I never have complains since after. Siraya tech Blu Nylon Black costed me $45 a bottle while Anycubic ABS-like Pro 2 costs me $21 a bottle. Ironically Anycubic resin in my experience is much better than that Siraya resin that I once had faith with. I still have couple bottles of Siraya tech Blu Nylon Black resin I have no idea what to do with them. Now thanks to your video I can try mixing them with Anycubic ABS-like Pro 2 to see if I can use them without wasting.

[@ColinKlupiec]

Glad the video was helpful. I was also wondering how to get value from the resin I had left over. Now I’ve been able to use it all without wasting it.

[@almonster2066]

I mix Sunlu ABS and Phrozen ABS and it comes out amazing and lowers over cost.

[@tristanc2271]

Is the Sunlu stronger than the Prozen resin on its own?

[@ColinKlupiec]

Thanks for the tip.

[@trollpaintingminis4496]

Im really curious as to whats going on with that curing in the vat. Ive never had that before with anycubic or elegoo and ive been printing for years

[@ColinKlupiec]

Me too. I can't figure it out. It's the only resin I've ever had that problem with and I've been using lots of different resins, on three different printers.

[@trollpaintingminis4496]

I think I'm going to get the any cubic ultra tough to use for tecco toys mecha figures. Was gonna try siryatech blu nylon but this video disuaded me for sure

[@ColinKlupiec]

@@trollpaintingminis4496 I'm glad that was helpful. You may have already seen this, but I did a video on the Anycubic Tough Ultra. It's definitely worth a try if you need something super tough. kzbin.info/www/bejne/q2fZopVrqbZ0fbc

[@Braindead154]

What’s your wash and cure process for this mix?

[@ColinKlupiec]

IPA wash for 3min, and then cure for 5min. Same process I use for all my prints. Works well. 😀

[@Thee_Gamefanatic]

​@@ColinKlupiecHave you cured your parts submerged in warm water or at higher temperatures like >120°F?