MJX Hyper Go 14210 v2, H14BM Loaded With Alloy Upgrades And Mods. Desk Talk

[@curbscrape8343]

After roughly 35 years with rc , I've just heard a solid explanation and tips of toe-in/out and handling. Cheers mate. Subbed.

[@cheggers1973]

@curbscrape8343 that's a nice comment to read chap!, Cheers!

[@DrHyde-cq3eg]

Great looking rig. You done some nice work especially with that body. I recommend spraying it on the inside with Flex Seal to. Awesome job with this.

[@nickford7659]

My h14bm is getting a purple version of the metal alloy parts it looks great and can’t wait to bash around

[@troopermyself1]

Within few minutes of bashing aluminium will bend

[@denisbouvier1489]

Used your plans and modded my body too. No more snow getting inside my important bits. Cheers!

[@cheggers1973]

Mate!, I got a little Buzz reading that!.... You are the first and only to try as far as I know so far!... I'm glad that you confirmed that they can be made from watching this vid... I would love to see your version and how it turned out!, if you do Facebook, please join the MJX Hyper Go Owners UK Group and make a post showing your efforts!, I for one would love to see it!... I'll know you from the post, I'm Admin, and I'll make myself known to you!... There is more from me to see there too!.. Cheer's!, and thanks For watching and your kind comment! Sincerely,Keith.

[@DaveSaysYesh]

Great video much appreciated! Some really interesting upgrades and tips 👌

[@cheggers1973]

Thankyou Dave! that is really nice to read!

[@DaveSaysYesh]

@cheggers1973 never seen anyone mod the bodyshell like that to keep the mud out, and using margarine tubs is genius ! The fact it makes the shell stronger too is a nice bonus Also loved how you removed the anodising with hot water and sink unblocked! And polished with autosol...came out looking amazing 👏

[@cheggers1973]

@@DaveSaysYesh Thanks again for another great comment Chap!.. I`m really happy that you like my Margerine Tub mods haha, and the effort put into stripping and polishing..

[@luvadealme]

Which brand margarine tubs are the best to start with? ​@@cheggers1973

[@-xirx-]

Subscribed for this content, cheers. Just bought an mjx as my first rc car and was looking through yt for info on upgrading it. 🙂👍

[@cheggers1973]

Thank You for the nice comment chap!

[@bryangadson-me9eh]

Nice work on truck and have to do my shell as well keep it clean

[@cheggers1973]

Thanks Bro!, Yeah the Margarine tub upgrades work really good, you will be happy you spent the time doing it.👍

[@davidruiz6415]

🔥💯lotta information love it💯🔥

[@richardbrown9138]

NICE! God bless brother!

[@philiprccars4340]

I don't know if you have the MJX 16207 3S as well, but the stock wheelie bar is a complete fail, just a slightly hard hit on either side and the screw holes on it are torn out. I figured out how to upgrade and modify this so that it does not happen. The same mod will also work for the MJX 14210 wheelie bar.

[@cheggers1973]

I've not had my wheelie bar break or any problems with the screws yet on this Truggy. Possibly due to less crashes due to a lower setup..I'm sorry yours has failed on you chap!.

[@philiprccars4340]

@@cheggers1973 The MJX 16207 wheelie bar is longer than the 14210 wheelie bar, so I am going to modify it with a piece of shock spring so that it can move in all four directions during future side impacts, but still be solid enough to help stop the buggy from doing too many standing backflips on 3S. In stock form it is just going to keep ripping the screw holes out and fall off. I think all the MJX 16207 owners have experienced that the 16207 wheelie bar in stock form was made to fail.

[@scottparish9156]

Great video mate, with some awesome tips your one looks mint. I have the same truggy and have added 15mm hub extenders like yours i have also got asjustable aluminium steering tie rod arms. I have just ordered the steering servo after seeing the video and link that you put on and will be getting the other aluminium steering linkages 😊. Keep up the awesome work and that car is a credit to you. Did you put up a video of how to strip the car to get to the diffs and was it easy

[@cheggers1973]

Thanks for the kind comments Chap!, I'm glad your enjoying upgrading your Truggy like I have!, you wait till you see what I did to Him now, and what's coming next haha.. I didn't do a diff strip vid, it's not difficult, just remember where screws go. Thanks for watching!

[@sashac61]

Very helpful

[@brandmedia-reklama]

Отличная работа. Возьму себе во внимание. Сделаю подобное и выложу раскрой деталей. Ещё раз спасибо за обзор.

[@cheggers1973]

I'm sorry. I can't copy that to try and translate it.... So I have no idea what it says?....I hope it's nice! 😁

[@brandmedia-reklama]

Great job. I'll take it into account. I'll do something similar and post the details. Thanks again for the review.

[@cheggers1973]

@@brandmedia-reklama Thank you for your kind comment!, and thank you for the translation!... And Thanks For Watching!

[@shawnstewart9191]

Would you be willing to do a parts list? And I noticed you didn't mention what servo, steering your using for the new tires.

[@cheggers1973]

The servo upgrades have their own vid chap. kzbin.info/www/bejne/mWjIdmqBg9Vjircsi=6fJVIiq5qOxMLJ3K Thanks For Watching!

[@안성준-j3d]

You're the best

[@danielking5246]

Did you see a decrease in travel after installing the AL arms/linkages

[@cheggers1973]

The travel is the same as it was chap!

[@DanK-Mtb]

Weird, I just installed the AL parts and the travel seems significantly less 🤔

[@danielking5246]

also did you add the firming coils of the shocks ? or just removed the blackness from the OEM coils ?

[@cheggers1973]

@@danielking5246 I used the stiffer chrome springs that came in the spares pack.

[@stevenfarraway]

@@DanK-Mtb same with me on mine. The A arms hit the shock tower at full travel...

[@jefftait4745]

What bearings are needed for inside the steering cups?

[@cheggers1973]

It states exactly what bearings are needed in the owners manual.

[@quesadajeremy9273]

What about the balance plug rubbing the tire

[@NeighberhoodRC]

How come the diff holder not aluminum? The case that hold the motor pinion and differential?

[@TallyhoScreams]

Did the upgrades help the squirrelly handling? I bet the weight keeps it from flipping as much.

[@cheggers1973]

Everything I have done to it has improved it chap.

[@quesadajeremy9273]

Mine has a really bad delay in thr transmitter gonna be the second upgrade my first was a drag bar made from carbon fiber

[@lukashlr]

How do the wheels need to be drilled to fit this 15mm hex extensions?

[@khai5922]

You have any issue with stripped screw under the chasis? I noticed the screw material quite low quality

[@lukashlr]

Hi Are them shocks from serious rc or elsewhere?

[@stevestevens9780]

Nice vid, great info there! Do you have a link or part number for the servo?

[@cheggers1973]

Cheers!, it's the JMRC metal gear one.. if you type MJX Hyper Go 14210 upgrade parts in AliExpress you will see it amongst other wonderful things haha.

[@t3floz]

Got a e revo 1/16 which I think is annoying to work on. Do you think the mjx is hard to work on? Do you think the traxxas esc would fit?

[@yunusdesai2429]

Great video. How durable has the aluminum parts been for you for bashing?

[@cheggers1973]

They are stronger due to being alloy.

[@s33m3shine3FPV]

What servo is good for this? Im looking for a upgrade but mjx doesnt give specta on the srvo to know what after market will fix.

[@cheggers1973]

kzbin.info/www/bejne/mWjIdmqBg9Vjircsi=tfN0VKliypAXUvv6

[@eastsider5199]

What do you lubricate the car with after washing

[@cheggers1973]

i spray 3in1 oil on the moving bits, wipe with a cloth and then I spray WD40 on a 50mm paint brush and paint everything, the plastics love it and it looks brand new when it dry's off.. thanks For Watching!

[@wouldstock1]

Where did you get the aluminum steering linkages, and do you have a part number for them. My stock ones failed, and can only find the plastic ones.

[@cheggers1973]

These are the steering pushrods if that's what you mean..... Just found this amazing item on AliExpress. Check it out! ￡2.54 | 2pcs Metal Front Steering Rod Steering Links For MJX H16 16207 16208 16209 16210 1/16 RC Car Upgrades Parts Accessories a.aliexpress.com/_EuAjbjT These are the steering parts.... Just found this amazing item on AliExpress. Check it out! ￡4.45 8%OFF | MJX 14209 14210 Rc Car Parts All Metal Directional Component Bearing Version OP Upgraded Parts, Modified Model Accessories a.aliexpress.com/_EuHYG1j

[@wouldstock1]

@@cheggers1973 Nice. Thanks! I think I found similar ones, but they looked like they were for the 1/16 scale versions, so I wasn't sure they would work.

[@cheggers1973]

@@wouldstock1 No probs Chap... those ones linked, definitely will fit!, and improve the slop. I just noticed they say 1/16 but don't worry, they are in there adjustments range. Thanks for Watching!

[@wouldstock1]

@@cheggers1973 Right on!

[@cheggers1973]

@@wouldstock1 I sincerely Dig That saying Man haha...

[@brknpropfpv3899]

Do you remember what weight of oil you used for the front and rear shocks? TY

[@cheggers1973]

@@brknpropfpv3899 no, I made my own thick mix, but I since learned that the factory uses 7500 CST.

[@skylinecollector]

So I have white litium grease and I also have red n tacky automotive grease. Should I use either one of those in the diff to give it some lock up?

[@cheggers1973]

Yes chap, fill the diffs with the Red Tacky Grease, and the outer gear, it gives a noticeable stability in the diff and translates to better forward drive, and more grip and traction when it's leaning over cornering... my friend Wilf, has his diffs full of grease..it's better than mine on solid surfaces...and better than it was on loose surfaces.. mine with 500k silicone oil in my diffs makes it a bit of a handful on tarmac and the like...it wants to drift.. which I like.. hope that helps Chap!

[@skylinecollector]

@@cheggers1973 awesome thank you. In the video you described exactly what I want to fix about the truck. I'm thinking I should fill the front diff with something lighter to allow it some extra slip so it still turns pretty good. Would the lithium grease be good for that kind of setup?

[@cheggers1973]

@@skylinecollector the Red grease is not thick enough to worry about modifying front or rear... it will handle lovely with grease in both chap... I may return to that setup in the future, it's a good mod that's a all-rounder.. less spin on the inside,unloaded wheel,better drift,better straight line with no apparent detriment to steering.. pack em full chap...

[@grumpygrandpa3640]

What wheel hex’s extender did you get ?

[@lukashlr]

Them silver shocks where can I get them?

[@jaymechanic1228]

Great rig and video. Iv fitted the metal suspension arms , hubs front and rear after snapping the front hub. Now the front wheels have alot of negative camber. Would u say this is normal or possible an issue with the front upper arms . Or are they naturally cambered in?? I got the same aluminium parts as you. But my front wheels are in alot more then yours.

[@donmistral]

What shock absorbers did you use ? Can you send me the link ?

[@cheggers1973]

Standard shocks..

[@manvendersinghrathore8340]

Is there any effect on speed ? Because of alloys

[@Sam-nz2zs]

Yo so you bought the red metal parts and took the anodise off to make it metal colour? Looks sick like that

[@cheggers1973]

Cheers Chap!..., the alloy parts from serious-Rc come as you see them with the silver coating, the camera has the effect of making them look simular to the polished rod and shocks.

[@Sam-nz2zs]

@@cheggers1973 so what does this anodising do other than take the colour off of parts?

[@cheggers1973]

@@Sam-nz2zs you annodise colour on to a part not the other way round...i removed the annodising with caustic soda...did you watch all the vid mate?

[@Sam-nz2zs]

@@cheggers1973 yeah basically all of it. So it takes the colour back to metal so you matched it with the anodising silver

[@cheggers1973]

@@Sam-nz2zs yes exactly that!, the silver Alloy parts from Serious-Rc are Matt anodising though... they may well get the polishing treatment at some point.... please watch all of my of the vid before questions mate.... I do my best to answer you but it makes it hard if you didn't watch all of it.. because the answer about anodising and stripping is in the vid...... cheers.

[@larsjungnell1969]

Hej, bra video, har du prövat de mindre hjulen till mjx 16210, mycket bättre stabiletet........... 😊

[@cheggers1973]

I can tell that it's Swedish, but that's all I know... You will need to translate that for a better reply from me mate...

[@larsjungnell1969]

@@cheggers1973 sorry, trythe wheels for the mjx 16210 for the sabitily........ 😜😜😜

[@cheggers1973]

@@larsjungnell1969 if that's advise, I think you didn't see this yet.. kzbin.info/www/bejne/qHbRfnype9ScjtUsi=xpkjD7Po97Kf4o3o

[@orbitaljellyfish808]

Which extensions are those? (Don’t 1/10 scale cars have bigger axle threads?) Did they require any drilling of wheels? Car is awesome great job and thanks for the details 👏👏

[@cheggers1973]

Thank you for your kind comment Chap!... the extension are the common type with a 12mm hex, I brough the 15mm ones in red.. I'll dig out the eBay link, if your not in the UK,you should have no problem finding some near you.. you do have to be sure you really want them because you are correct, the wheels need drilling to 5mm..or 4.5mm for a push in snug fit. Thanks for watching! This is a link to the ones I brought. www.ebay.co.uk/itm/394008417949?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=FGuy7wMHQGC&sssrc=4429486&ssuid=6T6KsFniTvK&var=&widget_ver=artemis&media=COPY

[@orbitaljellyfish808]

@@cheggers1973 right on thanks good sir!

[@cheggers1973]

@@orbitaljellyfish808 you are very welcome!.

[@lukashlr]

Is there any specific drill bit to drill a hex hole ?

[@feverexplosion1968]

What front arms do you use and can you send me the link

[@cheggers1973]

This is a link to all MJX Hyper Go 14210 parts included the alloy ones... From www.seriousrc.co.uk www.seriousrc.co.uk/collections/mjx-hyper-go-14210-truck-spare-parts-and-upgrades

[@treb1395]

where can i buy the front lower bumper?

[@cheggers1973]

It was made by me from alloy tube.

[@itzredo8912]

What servo did you install?

[@cheggers1973]

Just found this amazing item on AliExpress. Check it out! ￡8.89 | MJX Hyper Go RC Car 14209 14210 Replacement Accessories 3 Wires Upgrade Digital Metal Servo Spare Parts a.aliexpress.com/_EuJgzj7

[@StudyConcentrate-y1z]

Please me dude i have two options silicon oil 7000cst and 15000cst which should I use for the differentials ? Both front and back .the 15000is more affordable to me . Please help me bro

[@cheggers1973]

@@StudyConcentrate-y1z if you want limited slip, you will need thicker, I used 500,000cst.

[@StudyConcentrate-y1z]

@@cheggers1973 can i use silicon gresse or white lithium gresse actually silicon oil is not available in India and importing them will cost me 40$ . Please reply 🙏

[@cheggers1973]

@@StudyConcentrate-y1z you can use any grease, but it won't offer much resistance to limit the slip of the diff, it's not thick enough.... But it will lubricate it just fine.

[@StudyConcentrate-y1z]

@@cheggers1973 sorry for taking so much of your time but can you please explain me what is slip of differential

[@cheggers1973]

@StudyConcentrate-y1z Google what is a limited slip diff.. its explained in my videos too.

[@ArnoldKrT]

We wanna see how you send it

[@cheggers1973]

Your in for a long wait mate haha... launching to oblivion with zero chance of a nice landing is not my thing...

[@ArnoldKrT]

@@cheggers1973 i mean just off-road

[@cheggers1973]

@@ArnoldKrT ohh I see, yeah I do plenty of that in the other vids...have a look at the Quarry vid.. Thanks For Watching Chap!

[@cheggers1973]

@@ArnoldKrT this one... I feel that this is how we are supposed to use these Truggy's.. the launching is for paid KZbinrs with a fee car haha kzbin.info/www/bejne/n2jKdnepaJukrMksi=1em0_OGBWgBPhCGV

[@mussietube9909]

What to do for more speed

[@cheggers1973]

kzbin.info/www/bejne/qHbRfnype9ScjtUsi=qA52UwLkhbOvIjkw

[@manvendersinghrathore8340]

Is there any speed difference between between 14201 and the 14Bm the newer and the older plz reply i got the old one is there any difference and are boht tha car durable ?

[@cheggers1973]

If you mean the 14210 and the H14BM, they are the same speed same car apart from slightly different shell and the H14BM has a slow mode,eco mode.. the 14210 comes in full power mode..

[@manvendersinghrathore8340]

@@cheggers1973 ok thanks for replying just one question more is it durable? Its much first rc the 14210 i will use it with car and I’ll do a very little bit bashing so is it durable enough for that?

[@cheggers1973]

@@manvendersinghrathore8340 it doesn't matter what I say in terms of durability, there is no measure.... Everything can break.

[@feverexplosion1968]

Can I put 1 million diff fluid instead?

[@cheggers1973]

Yes you can, it will have more locking effect...... But that's not nessasaryly better.

[@feverexplosion1968]

@@cheggers1973 Is it going to have a bad effect on performance

[@cheggers1973]

@@feverexplosion1968 if you only intend to use it on loose surfaces then 1 million weight is ok because you have almost permanent equal 4 wheels drive.. great for sliding and drifting without the inside wheels expanding and taking away the power from the outer wheels with actual grip... On tarmac roads, having 1 million weight locked diffs means the slightest turn will make the inside wheels spin faster than the car is moving due to the inside wheels taking a tighter radius, and the weight being on the outer wheels. And so not gripping at that point.. more sliding like the locked rear axel of a GoKart for example..

[@cheggers1973]

@@feverexplosion1968 it doesn't slow it down if that's what you mean.

[@manvendersinghrathore8340]

Bro can i use a 11.1v 5500mah 3s 35c lipo battery for my mjx idk anything abour it i just ordered it is it ok?

[@cheggers1973]

No, that's far too big..

[@manvendersinghrathore8340]

@@cheggers1973 bro so can i use 2200 mah for mjx ? 14210

[@cheggers1973]

@@manvendersinghrathore8340 not all 2200msh 3s lipos are the same size.. but that's what the UK spec model comes with... Venom Drive 2200mah 3s 50c...

[@lukashlr]

I have 7.4V 5000mAh 25c and hope this is ok and won't burn it

[@feverexplosion1968]

Link to hub extensions please

[@cheggers1973]

www.ebay.co.uk/itm/195511861733?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=UdLxmPhjSYW&sssrc=4429486&ssuid=6T6KsFniTvK&var=&widget_ver=artemis&media=COPY

[@feverexplosion1968]

@@cheggers1973 thanks

[@feverexplosion1968]

what mm and do I need aftermarket axles

[@cheggers1973]

@@feverexplosion1968 it's your choice...mine are 15mm.

[@feverexplosion1968]

@@cheggers1973 wait so stock axles?

[@quesadajeremy9273]

Use a paper clip

[@5675492]

I'm looking into slowing my 14209 down to trail speeds as much as possible . Do you know of any combination of transmissions/gearing/esc/motors that would fit the 14209 that would make it more of a trail machine ? Thanks ! I've wanted to do this ever since I saw these videos - the 14209 is a beast on the trail ! kzbin.info/www/bejne/fpDNmGaYn52mjLc kzbin.info/www/bejne/nXXFoZegibSYp8U

[@cheggers1973]

I only know how to make it faster chap.

[@troopermyself1]

U can limit the acceleration And make it slow

[@5675492]

@@troopermyself1 I was hoping for something other than just trying to limit it with the amount of pressure on the trigger . From what others are telling me just replacing the receiver and transmitter with one that has a variable speed control on it might be the answer .

[@troopermyself1]

@@5675492 yes I bought a radiomaster mt12 elrs for that I too like crawlers whenever i go off-road…

[@brenthood2337]

If you go too far with aluminum especially suspension arms you'll lose all your durability.

[@cheggers1973]

Not correct. I've broke 3 plastic wishbones... zero aluminium ones.

[@lukerecore]

What??

[@cheggers1973]

What what?

[@lukerecore]

@@cheggers1973 I couldn't hear a word u were saying.

[@cheggers1973]

@@lukerecore wait about 20-30 seconds and you will hear me Perfect chap...I knew I should have wrote on screen about that..

[@GoodLuckDuck77]

MOVE YOUR THUMB!!

[@cheggers1973]

@@GoodLuckDuck77 what?