Thank you so much. I've been battling this intercooler for months now. Thank you so much
@jhonsalchijhon59923 жыл бұрын
I'm very impressed very helpful i did the same for my mk4 gli i did struggle and I'm confused about the little line next to the splitter valve my kit didn't come whit the line next to the splitter valve
@baubaa1417 Жыл бұрын
4:42 on my mk4 that bracket was much higher up and was used as a support. i mounted it to the strut tower
@luisro778210 ай бұрын
you did a very good job!!!
@luisro778210 ай бұрын
is this the pipping that is 2" on the hotside and 2.35" on the cold side???
@bobbyallen75103 жыл бұрын
you have the long down pipe backwards thats bracket attaches the the valve cover or where the air filter bracket goes lol
@stevefraser20043 жыл бұрын
Second pipe with the bracket to know where is on upside down!
@kingburrito77734 жыл бұрын
Maaaan I don’t wanna cut up my mk4 but I want that extra cooling
@moyocoyo44 жыл бұрын
Good move by adding a 45 degree coupler on the top, it looks neat. Did you already cut the coupler by the way?
@mariotorres56963 жыл бұрын
What product did you exactly use for the weld.
@DuelistWave Жыл бұрын
bmx for life bro
@MK4_PDX2 жыл бұрын
Can you put the eBay kit in the description
@albiee67323 жыл бұрын
What thread size did you use to mount it to the bash bar
@ivanking15712 жыл бұрын
surprised no one ever made a bracket for these cars so the intercooler could be attached on the outside of the bumper.
@mastermnd224 ай бұрын
Upside down and backwards. That's how you put everything on
@juvnal4 жыл бұрын
where did you get that bumper?
10 күн бұрын
So i bought eBay intercooler kit lol but didn't realize this one came with a blow off valve and i obviously have my diverter valve on my inlet plenum can they both work? i also bought the forge inlet trying to install lol...
@damnzaddy47742 жыл бұрын
What’s the piece for the n75 called ?
@michaelnibblett2089 Жыл бұрын
Does it matter whether the fmic was for a jetta or not?
@Brinkz1.8t20v5 ай бұрын
You’ve done that so wrong 😂😂😂
@swizzyDIA11 ай бұрын
Where did u get the nipple for the n75 valve
@chrishuhn57282 жыл бұрын
Never cut the pipe unless you have a weld machine
@andrewphilips43203 жыл бұрын
hey could u add the link too the kit on here?
@alejandrocalderon78664 жыл бұрын
Is that the R32 Bumper?
@jonrichers8914 жыл бұрын
So your problem is you put the pipes from the turbo to the intercooler on backwards. I have the same exact kit. Took me a while to figure out but if you do that you dont need to cut you just need to weld the extra n75 port on
@WolfEyeGames4 жыл бұрын
Jon Richers do you have a pic? I have the same kit too and am installing it and would love to see a picture for this. Does this fix the flange for the piping to actually be bolted somewhere?
@bryanportillo35504 жыл бұрын
CaptainWolf what kit did you buy
@WolfEyeGames4 жыл бұрын
Bryan Portillo I bought the black horse racing kit. Just installed it and it works great.
@bryanportillo35504 жыл бұрын
CaptainWolf link ?
@davidanikeyev27073 жыл бұрын
Where did you get your intercooler kit?
@hunterjensen3 жыл бұрын
eBay.com
@FenixPajarito3 жыл бұрын
Is this mod worth it on a stock 2005 Mk4 gti 1.8t KO3s? I notice the car runs slower when the wheather is warmer maybe if I install this front mount intercooler will help to get a little bit fresher air.
@Stealth.CR_ontiktok Жыл бұрын
Yes it will
@Stealth.CR_ontiktok Жыл бұрын
Yes it will
@rileynauss17243 жыл бұрын
Did the kit come with the flange where the maf sensor goes
@hunterjensen3 жыл бұрын
No they’re 15$ on Amazon
@manuel___alejan193 жыл бұрын
Do you have the link the kit?
@louiekidd123 жыл бұрын
Did you relocate your battery?
@hunterjensen3 жыл бұрын
Yes
@louiekidd123 жыл бұрын
How complicated was it
@omarmoran30973 жыл бұрын
Ight buddy I have a question my car is running lean I already changed the maf sensor also the throttle buddy witch lifted the safe mode off. I ran a test on car only failed one TID: $05 CID: $0D I Looked up $05 and it stand for oxygen sensor. Not sure if that's why I'm running lean. I already changed so much stuff to this car also fuel injectors. The fuel gauge don't work not sure if it's do to the sending unit not working making the car go lean. One of the fualt codes is p0411 secondary air injection. Ima test it the or some other day sometimes it turns on in a cold start for like 4 seconds. I'm guessing it's between oxygen sensor, fuel pump and sec air pump. I already checked all the hoeses they all perfect. Any clues from you?