MK6 GTI Brembo 18z Caliper Front Big Brake Upgrade

  Рет қаралды 72,984

Crafty Workshop Builds

Crafty Workshop Builds

Күн бұрын

Пікірлер
@fraserkennedy7854
@fraserkennedy7854 Жыл бұрын
On behalf of men without guidance, help, or money, I would like to salute you for your service.
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Much respect and thanks for watching!
@remseyhumphreys917
@remseyhumphreys917 Жыл бұрын
@@CraftyWorkshopBuildsNo sincerely brother 🫡
@joeverzosa4548
@joeverzosa4548 2 жыл бұрын
You really make this tutorial look easy. Straight to the point and articulate. Subscribed to your channel. Thanks.
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Much respect, welcome to the Crafty family!
@joshuam7552
@joshuam7552 2 жыл бұрын
You did an awesome job on this tutorial! Thank you very much! Looking to add 18z Brembo's to my '18 Passat GT 3.6L VR6
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Much respect! Yea, these brakes are worth the upgrade.
@OfficiallyGuChi
@OfficiallyGuChi 2 жыл бұрын
I did the 6pot 18z Q7 bremboz on my audi a4 2.0t quattro. its a direct bolt on with the exception i had to use ML55 amg rotors thats 345mm. ML55 rotors stock centre bore is 67mm.. i had to find someone to open it up to 68mm to fit the audi centre bore hub. rs4 brake lines. im currently looking into making my own rear brackets to fit the 17z 4pot brembo from a Q7 rears to my A4 rears with 330mm s5 rotors with a wilwood dual caliper to retain the handbrake!
@carlossaavedra1973
@carlossaavedra1973 Жыл бұрын
Hey there I have a a4 b7 2.0t can I fit 17z rotors in front as well ??
@audittrs2885
@audittrs2885 2 жыл бұрын
I put 18z calipers on my mk1 audi tt 225 with mk4 r32 discs huge difference
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Yea, it's definitely worth the upgrade.
@jetonbalidemaj
@jetonbalidemaj Жыл бұрын
How did the brake pedal feel afterwards? I head you have to install a bigger master cylinder from a rs3 so the pedal doesn't feel mushy after installing these?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Nah, the pedal does not feel mushy. The braking just feels significant better.
@Masterkizz
@Masterkizz 3 жыл бұрын
Great video. Hoping to do this to my MK6 someday!
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
Thanks! Yea, you'll definitely appreciate the upgrade.
@amandadavis5777
@amandadavis5777 Жыл бұрын
Hey bro nice video! What size hub centric ring do I need for rotors?
@superbikesquadracer
@superbikesquadracer 3 жыл бұрын
Congrats brother! Defnetly worth the money! Huge diffrence
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
Thanks! Yea, the stopping power is a night and day difference.
@deantaylor299
@deantaylor299 11 ай бұрын
So I was curious.. I own a golf R mk7 and wanted to install this set up sometime next year. It was mentioned that with the mk7 you would need to grind approx 1mm off for clearance on the back? But it uses the MK6 knuckles for the install.. would you know where the grinding is needed? Appreciate any info on the swap. Thank you in advance!! 🙏🙏
@Arzouni4
@Arzouni4 Жыл бұрын
great video .... I just change my caliper to 18 ZR brembo, do you know the of yellow pads I can use with these caliper? thanks
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Hawk pads?
@145project8
@145project8 2 ай бұрын
Did the Scirocco do the same?
@junctionblue
@junctionblue 9 ай бұрын
Awesome work, you gained another fan & subscriber. One question, are the parts listed the same for a 2019 VW Tiguan?
@kiss718able
@kiss718able Жыл бұрын
ONCE AGAIN U ACED IT GENERAL💪🏽🔥💯
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Much respect fam!
@ThePeelLife
@ThePeelLife 2 жыл бұрын
I was curious as to what spacer you used? I did this same mod and i am having some vibration and believe its the hub having no support on the wheel
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Did you use the hub centric rings?
@ThePeelLife
@ThePeelLife 2 жыл бұрын
@@CraftyWorkshopBuilds yeah i did
@ThePeelLife
@ThePeelLife 2 жыл бұрын
@@CraftyWorkshopBuilds what spacer did you use?
@danielcastrillon4794
@danielcastrillon4794 2 жыл бұрын
@lisa did you figure out the vibration problem?
@simonegarza7548
@simonegarza7548 2 жыл бұрын
Thank u.my mechanic is having problems finding the parts for my 18z but i also have them on the back.would it be the same for the rear?
@OscarRodriguez-mo8wm
@OscarRodriguez-mo8wm 5 ай бұрын
Were can I get the hardware needed for this conversion
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 5 ай бұрын
check the links in the description
@ronniesenter5969
@ronniesenter5969 20 күн бұрын
Hi I have a 2000 A6 2.7t. What rotors are you running?
@faridmazli94
@faridmazli94 Жыл бұрын
Hi sir.. all of things is just plug and play without any modification? What model of disc rotor you using?
@andreasnik7937
@andreasnik7937 Жыл бұрын
Very nice video!I have a few questions though .What size of brake discs are these ? The brake sensors of the porsche can fit the scirocco or i have to buy new one ?same with brake lines ?
@andreasnik7937
@andreasnik7937 Жыл бұрын
Also will i need adaptors for the scirocco?
@liionelbooon
@liionelbooon 8 ай бұрын
super tutorial. Is it safe to get refurbbished brembo 18z for my bmw?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 8 ай бұрын
Yes, people rebuild brembo brakes all the time. Mine was in good condition, that's why I didn't rebuild them.
@zcid
@zcid 2 ай бұрын
How was the brake pedal feel after having done this upgrade? I've seen many online saying that the pedal feel was bad because the master cylinder/brake booster couldn't keep up with the needs of the bigger caliper.
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 ай бұрын
brake pedal feels good to me. I don't have that issue that others are complaining about.
@elpaparaxy
@elpaparaxy 3 ай бұрын
what size rotors did you use? I'm planning to do the same upgrade but in this case on my GTI MK7. Do you think it may work as well. Thank you
@biqsgarage
@biqsgarage 9 ай бұрын
Bro, great video! Do you know if is the same process for a 2012 mk6 jetta gli? do you think the stock master cylinder will be enough for the caliper? And the brake sensor, will work fine on jettas? thanks man!
@dantemagz6672
@dantemagz6672 2 жыл бұрын
So the stock master cylinder works fine with them? Also would mk5 gti aftermarket ss lines work as well?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Yes, the stock master cylinder works fine. Not sure about your about those lines you mentioned.
@javielsamuel1043
@javielsamuel1043 Жыл бұрын
What's your frot Rim specs and what with spacer did you use for fitment over the bbk?
@craigyoung8692
@craigyoung8692 Жыл бұрын
Fantastic video fella. 👍🏻
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Much respect!
@themacjunkie
@themacjunkie 3 ай бұрын
is ECS the only ones making the hardware? It sucks having to pay $130 for 4 caliper bolts.
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 ай бұрын
nah, ECS is not the only one who makes it. but they are the most reliable source. everywhere else is always changing the links and such.
@bygara61
@bygara61 20 күн бұрын
Is the 18Z directly compatible with Skoda Superb 3? Will the 375mm caliper work properly?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 16 күн бұрын
I'm not sure about the fitment. we don't have those cars in the US.
@shivansamlal667
@shivansamlal667 2 ай бұрын
Hey I know I’m very late into this but why aren’t people just using the b7 s4 front rotors for the 18z swap they are 345 which is 5 smaller but they work
@zayedalhajeri2136
@zayedalhajeri2136 Жыл бұрын
Really Amazing, you are the BEST💖💫✌
@elsnacho
@elsnacho 9 ай бұрын
Hello. Did you have to change the caliper carrier/bracket to fit the bigger rotors? Thank you!
@martinbrutenic5924
@martinbrutenic5924 Жыл бұрын
Nice tutorial, i have same brakes on the e46 and really looks good,,wheels made car
@Gustavo-ld1sr
@Gustavo-ld1sr 2 жыл бұрын
No adapter brackets were needed?? Just direct bolt on? Apart from rotors ofc
@aleatuc
@aleatuc Жыл бұрын
You used the hubcentric rings because you have aftermarket wheels or for the brake disc not to move?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Both, I have one for the rotor and one for the aftermarket wheels.
@aleatuc
@aleatuc Жыл бұрын
@@CraftyWorkshopBuilds so you have one on the wheel and the one on the li k is just for the rotors or the same ring work in both together?
@jonathangobaly6377
@jonathangobaly6377 Жыл бұрын
Salut ✌... Quels sont les adaptateurs pour se montage s'il vous plaît ? Merci
@renatoolea674
@renatoolea674 3 жыл бұрын
Thank you for the support bro!
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
Thanks for watching!
@renatoolea674
@renatoolea674 3 жыл бұрын
@@CraftyWorkshopBuilds Hey, I got my Cayenne calipers today, lol I'm planning to install after winter, do you know where I can get the Mounting Hardware ?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
@@renatoolea674 reach out to me on Instagram and I'll search and send you a link.
@francislivingston2325
@francislivingston2325 2 жыл бұрын
What spacer did you add into the rotor at the end? Also it looks like you added a centric ring to that spacer. Can you please provide the info. Thank you
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
5mm spacer, my wheels will clear the calipers without the spacer. Nah no centric ring added to the spacer
@ruma0997
@ruma0997 Жыл бұрын
Do you know if Porsche 18z calipers would be a direct bolt in on a mk7.5 gti?
@carlossaavedra1973
@carlossaavedra1973 Жыл бұрын
I know you have a a4 b7 2.0t can you show how to put 17z calipers on a a4 b7 2.0t thank you!
@jaybaby2507
@jaybaby2507 8 ай бұрын
Can u tell me what make n Model, year Porsche u got the brake Calibras off
@bliang33
@bliang33 2 жыл бұрын
Do you need to change the break pump for this project?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Nah, I still have the stock master cylinder.
@themoneyshower24
@themoneyshower24 3 жыл бұрын
Busy with a retrofit also... Would it be fine running the disc without the set screw securing it to the hub?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
Yea, it will be fine. If you have a wheel stud conversion, it will also help to keep the rotor in place.
@rubensilva2081
@rubensilva2081 Жыл бұрын
Can you tell me what car the disks are from? It's what size they are, I want to apply it to an Audi SE 8L!
@rayanchamas8651
@rayanchamas8651 Жыл бұрын
Are they wizzing while driving? Cause mine do
@thomasurrutia1040
@thomasurrutia1040 3 ай бұрын
Will this fit on an Audi a3 8v?
@IntegraTypeSPerformance
@IntegraTypeSPerformance 2 ай бұрын
Great video! What size wheels are you using?
@ABiyela15
@ABiyela15 Жыл бұрын
Care to share a link for parts I'm interested in upgrading my mk7.5 gti
@romanbrushko3694
@romanbrushko3694 Жыл бұрын
Hey, I need help. Did all the same and I have vibration in the wheels. Very small. It increases with the speed. I don’t know what can be disbalanced. Do you have vibration? I put Brembo z18 on my Seat Leon
@Kb-go5qm
@Kb-go5qm Жыл бұрын
The rotors are not sold anymore, what other rotors would you recommend?
@jjgregory9394
@jjgregory9394 Жыл бұрын
I have a 2011 Passat CC , would this hardware work for mine as well ?
@vtecminileon
@vtecminileon 2 жыл бұрын
Hey man. Great video. Can you kindly please tell me whats the stud pattern/PCD on the discs?
@daniellaws4123
@daniellaws4123 2 жыл бұрын
5×115
@αισχοςντροπη
@αισχοςντροπη Жыл бұрын
Nice work !Do you have any problems with this kit? Is everything ok? Why not an s3 -tts straight fitment ?
@scamps5205
@scamps5205 2 жыл бұрын
What size hub centric ring do i need?
@em1ownerify
@em1ownerify Жыл бұрын
I put stoptech 328 on my front. Now the rears look completely weirdly small. Help me find a mkv r32 rear kit for 310 or give me advice on what to do for my rears
@Gearsandco
@Gearsandco 2 жыл бұрын
Question is it the same application for the 2016 Volkswagen Jetta ?
@muhdfakaruddin5953
@muhdfakaruddin5953 2 жыл бұрын
is the 17z brembo use the same setup like this..the rotor size and the bolts? if u can give detail size of the rotor..really appreciate that..tq bro..
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
The bolts will work. The rotor is a different size, I'll have to double check to find the correct size for the 17z.
@hieronymus..bosch8532
@hieronymus..bosch8532 2 жыл бұрын
Wait what about the master cylinder? I put these on a car & a 1" bore master cylinder had the pedal go to the floor so i had to go up to 1 1/8
@george2019
@george2019 5 ай бұрын
How long is the brake hose? do you have this information?
@Tstp12
@Tstp12 Жыл бұрын
Any problems running the OEM brake master cylinder?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Nah, no problems.
@printfab
@printfab 6 ай бұрын
Hi! What rotor did you use?
@fernandobarragan4871
@fernandobarragan4871 Жыл бұрын
I just recently did this conversion and used the rotor you put in the description and the oem pads for the 18z caliper are bigger than the rotor itself. Did you have any issue with your rotors?
@alexandercapellan1960
@alexandercapellan1960 Жыл бұрын
Which size are the Hub Centric ring? It is 65.1mm?
@luciengranger2762
@luciengranger2762 3 жыл бұрын
Great vid... got the same calipers and waiting for new 350mm custom rotors.... rear set up video? I'm running an audi tt mk2, all videos I've seen indicate that I'll def need a bracket plus the OEM calipers ( for handbrake) + the Bembos...
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
I might do the rear aswell, I still haven't decided as yet. But, yea you'll have to run a dual setup in the rear to maintain your handbrake. It's also recommended that you upgrade your brake booster as well.
@philippedionne6678
@philippedionne6678 2 жыл бұрын
Hey man loved the video! I was wondering if I could run this setup if my wheels needs hub centric rings since the rotor also needs them? Thanks!
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Much respect! Yes, if you have aftermarket wheels that needed hub centric, you still need to use them. So you'll be using two hub centric rings, one for the rotor and one for the wheel.
@philippedionne6678
@philippedionne6678 2 жыл бұрын
@@CraftyWorkshopBuilds thanks for the response! Im looking to rebuild the brembo 17z I got from a part out, do you know where I could find a kit to do that?
@moddednyc9473
@moddednyc9473 3 жыл бұрын
This is the best and most detailed video I’ve seen on this brake upgrade so far, Big up yuh self bro. I have a 2010 Audi A3 fwd (very similar to the mk6 platform). Do you think this kit would work for my car?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
You might have to change the spindle to the mk6 one, but I haven't got the chance to inspect the spindle on the Audi A3. I can't say for sure that the caliper is going to be a direct fit as is, but once you get the caliper mounted, everything else should work.
@moddednyc9473
@moddednyc9473 3 жыл бұрын
@@CraftyWorkshopBuilds ok, thanks a lot man.
@leviengel
@leviengel 2 жыл бұрын
So nice video! Very clear! Is the electronic sensor replaced or it is the same it was integrated with the stock brakes? Is there any electronic calibration or reprogramming required after upgrading with this brakes? Thanks!
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Nah, no reprogramming needed. The new sensor will plug into the stock connection socket.
@leviengel
@leviengel 2 жыл бұрын
@@CraftyWorkshopBuilds thanks! I see there is a link for everything you used and installed, but for the Calipers - Brembo 18z, where do you suggest to buy those?
@kippkewish9626
@kippkewish9626 Жыл бұрын
Those look good! Are the rear brakes stock? I wonder if there is a way to put the front brakes on the rear so the rear are a little bit bigger
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Yea, the rear brakes are stock. Nah, I don't know of any way to make the front brakes fit the back
@dubpilot1
@dubpilot1 2 жыл бұрын
Looking good there ,I will definitely check your channel for more 😎
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Much respect!
@TrillMk6
@TrillMk6 2 жыл бұрын
Any differences between installing brembo 17Z on a mk6?
@sahzhree7757
@sahzhree7757 Жыл бұрын
Looking it up, they should be near identical with no feelable difference. There is a technical difference, but nobody seems to notice it in driving.
@brianfulwood7827
@brianfulwood7827 2 жыл бұрын
Super clean video. Awesome step by step demo of the process. I would hire you to train new GST’s looking to move to tech B with how you run through your set up.
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Much Respect fam, thanks for watching!
@thegrenade64
@thegrenade64 Жыл бұрын
do you think this fit a 18 by 8.5 ET 45 wheel?
@erikjk7771
@erikjk7771 2 жыл бұрын
Look amazing, what rotors did you use
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Thanks! Rotor link in the description.
@mk6alex
@mk6alex Жыл бұрын
I'm planning on doing this soon, is there any other upgrades you recommend doing along with the rotors, pads, brake line, and calipers? Do we need any conversion plates or anything like that? Thank you! This video was extremely helpful!
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
I recommend doing a wheel stud conversion. I'm happy you found this video helpful!
@miitsaras7
@miitsaras7 8 ай бұрын
Greatings from Greece my friend.very nice job looks very beautiful.how much money you spend for this huge brakes?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 8 ай бұрын
Greetings! It cost me around one thousand usd for the parts at the time.
@wyvern3525
@wyvern3525 2 жыл бұрын
Do you know if the mk7 R's / audi S3's can do this? or are the knuckles too different?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Different knuckle. You could change the knuckle to a mk6 one.
@tadman3d
@tadman3d 2 жыл бұрын
so 18z calipers bolt up without any bracket? do they do that to any vw? mk5/4 ??
@glichapin
@glichapin 2 жыл бұрын
Correct me if im wrong but that is not the right side rottor been installed on the left side, meaning the outter of the grooves had to rotate towards the front..
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
The direction of the slots might be based on the manufacturer, and could also depend on the air vents in the middle of the rotor. The rotors that I used came with a stickers on them that identified what rotor was for the passenger side and what for the driver side.
@georgiereano6004
@georgiereano6004 2 жыл бұрын
What’s up bro I would like to know what parts you used I have a 2012 vw jetta gli and I am making many changes to it and that is one of the changes I want to make thanks
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Hey sup, the part's that I used are listed in the description.
@georgiereano6004
@georgiereano6004 2 жыл бұрын
I did see it but you didn't put which calipers you used I know it's 18 inches but not the year and which Porsche did you use thanks
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
@@georgiereano6004 The name of the caliper is "18z" they came on a couple different make/model SUV'S. "Brembo 18z Calipers" is what you should be looking for.
@damien_7483
@damien_7483 2 жыл бұрын
Nice vid man. Would anyone know if these fit mk7 r?
@MK6_GLI
@MK6_GLI 2 жыл бұрын
I'm curious how the brakes have felt since the conversion. Any consideration to swap for the TTRS master cylinder? Seems to be many mixed opinions about this.
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Nah, this brake setup exceeded my expectations, I have no plans to swap the master cylinder.
@PapaSmurf337
@PapaSmurf337 Жыл бұрын
@@CraftyWorkshopBuilds But how do the brakes feel now in comparison, you know like do they have more bite or do they just feel the same? Did you ever push the original brakes hard while using sticky tires and compare to them now?
@Blindslim43
@Blindslim43 2 жыл бұрын
What Porsche did the calipers come off of?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Porsche Cayenne
@eddiezayas4911
@eddiezayas4911 2 жыл бұрын
@@CraftyWorkshopBuilds love your video! What year Cayenne?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
@@eddiezayas4911 thanks! These calipers came on a few vehicles. You want to search for "brembo 18z"
@Steve-ub5yo
@Steve-ub5yo 3 жыл бұрын
What are your wheel specs to clear the caliper? Nice setup 👍🏽👍🏽👍🏽
@Thierrydsm
@Thierrydsm Жыл бұрын
Pretty sure its 35mm offset
@tylerhammmond
@tylerhammmond Жыл бұрын
15mm for most wheels
@elbowtoe84
@elbowtoe84 3 жыл бұрын
Right excellent great content what’s the costs involved
@carlow_fc1
@carlow_fc1 3 жыл бұрын
Are you doing the rears as well or no? And I was curious on what you meant by a stud conversion?
@dumbeezy5480
@dumbeezy5480 3 жыл бұрын
wheel stud conversion
@carlow_fc1
@carlow_fc1 3 жыл бұрын
@@dumbeezy5480 i mean like I want to know the sizing and what not yk what I mean?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
I did a video on the wheel stud conversion, the link is in the description. In that video I went in depth about the process and additional details are in the description of that video as well.
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 3 жыл бұрын
I had plan to do the rear as well, but right now the stopping power is so good, I'm hesitant about messing with the setup. However, if I end up doing it, I'll definitely make a video.
@dumbeezy5480
@dumbeezy5480 3 жыл бұрын
@@carlow_fc1 that can easily be found online
@fenat1
@fenat1 Жыл бұрын
What dimensions are the hub centrics?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Check the link in the description for the dimensions.
@forhadchoudhury2291
@forhadchoudhury2291 9 ай бұрын
What size spacer are you using to clear the calipers?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 9 ай бұрын
My rims clear the calipers without spacers. I put the spacer because I wanted the wheels to poke a little.
@DatGameCollector
@DatGameCollector 2 жыл бұрын
I have a 19 gti pp this upgrade path would work for me also right? Also my car had factory wheel 18" these caliper will clear it?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
You'll probably have to change your spindle to the mk6 spindle. Yea, 18inch wheels will fit over the brakes, but you might have to add spacers, depending on your wheel offset.
@DatGameCollector
@DatGameCollector 2 жыл бұрын
@@CraftyWorkshopBuilds Okay ill have to look into that! Thanks for the reply.
@fernandorivera8174
@fernandorivera8174 2 жыл бұрын
Can you link the new brake sensor!
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
I just added the link in the description.
@scotten34
@scotten34 2 жыл бұрын
Soo cool.. Thanks
@Jonathan00062
@Jonathan00062 2 жыл бұрын
Will they work on a mk4 jetta 2.0?
@JohnDominguez-gr6mr
@JohnDominguez-gr6mr Жыл бұрын
Where did you get the 18 Z brake calipers?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds Жыл бұрын
Ebay
@andrewmiller9622
@andrewmiller9622 2 жыл бұрын
Good video this can go good with my 05 Audi a4
@Devocated
@Devocated 5 ай бұрын
It does fit it's a little different on B6/7 though
@jamesmcnair32
@jamesmcnair32 2 жыл бұрын
Hey bro great video! I have the BBS CH-R’s just like you - 18 by 8.5s. I rly wanna do this to my gti too, did u run spacers to get these to fit? Cheers!
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Much respect! Yea, It will fit without spacers. You won't regret the brake upgrade.
@danielswofford2047
@danielswofford2047 2 жыл бұрын
Why did you run concentric rings? What size spacers did you use?
@LLoydDStiff
@LLoydDStiff 2 жыл бұрын
Nice detailed video. I don't think I'll be doing this to my Mk5 R32 since its not majing that much power to over power whats already on it but it wld look sweet 😁 gwaan do yuh ting fam. Respek 🙏🏾
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Yea, these brakes will definitely make your car look more aggressive, some people install these brakes mainly for the looks. I did it for both looks and performance, it's a major upgrade over stock brakes in terms of stopping power. Respect bro💪🏾
@LLoydDStiff
@LLoydDStiff 2 жыл бұрын
@@CraftyWorkshopBuilds yeah man I thought as much. Bog up on ur build still. May b when I'm done withe the E36 & Audi I'll turn my attention back to the bug..
@edsonsantiago9780
@edsonsantiago9780 2 жыл бұрын
Any updates on the mounting hardware ?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Hey, reach out to me on Instagram I'll send you a link to one.
@ruelsmith9216
@ruelsmith9216 2 жыл бұрын
Do you think the bm5 calipers could work on a 9th gen accord?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
I'm not sure about the accord fitment.
@elsalvador-kw9xo
@elsalvador-kw9xo 2 жыл бұрын
Where did u buy the calipers at!?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
I got them from ebay.
@raudirodriguez9765
@raudirodriguez9765 2 жыл бұрын
I got a Jetta gli 2017 , do those brakes fit on my car ?
@CraftyWorkshopBuilds
@CraftyWorkshopBuilds 2 жыл бұрын
Yes, they can
@raudirodriguez9765
@raudirodriguez9765 2 жыл бұрын
Thanks
@Carlosmartinhox
@Carlosmartinhox 2 жыл бұрын
Mas não levou a chapa preta que protege o disco?? Atenção a esse pormenor...
TTS Brake Calipers on MK7 | MK7.5 GTI, Golf R and MQB Audi S3
10:29
Deutsche Auto Parts
Рет қаралды 124 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН
人是不能做到吗?#火影忍者 #家人  #佐助
00:20
火影忍者一家
Рет қаралды 20 МЛН
CALIPERS DE 6 PISTONES A MI JETTA GLI MK4 || BREMBO
14:01
Infinix MX
Рет қаралды 16 М.
VW Golf MK6 GTI Rear Sway Bar Upgrade
16:20
Crafty Workshop Builds
Рет қаралды 10 М.
RACINGLINE 380mm STAGE 3 BIG BRAKE KIT INSTALL  -  How to... (4K-UHD)
6:35
All Stars Motorsport
Рет қаралды 26 М.
Brake Upgrade ~ How To Install a Big Brake Kit
22:04
HumbleMechanic
Рет қаралды 234 М.
25 Year Old Brembo Brake Caliper Restoration / Rebuild
23:42
RRC Restoration
Рет қаралды 2,3 МЛН
Touareg Brembo 18Z caliper installation 4K
24:41
JLPhotographics
Рет қаралды 1,2 М.
VW MK6 GTI Front Control Arm Bushings Upgrade - Part1
13:45
Crafty Workshop Builds
Рет қаралды 36 М.
Audi TT pinze Brembo ZR18
8:51
et extremetools
Рет қаралды 23 М.
The MK5 GTI Edition 30 Gets HUGE Big Brake Kit and More!
10:46
Alex Jones
Рет қаралды 11 М.
СИНИЙ ИНЕЙ УЖЕ ВЫШЕЛ!❄️
01:01
DO$HIK
Рет қаралды 3,3 МЛН