How To Fix windows Was Unable To Complete The Format - 100% Solved

[@sufiyanbadi401]

Error Showing "DiskPart has encountered an error: The parameter is incorrect. See the system event log for more information"

[@tahira8344]

I'm getting this too What should I do

[@creativelifest5018]

Yes also this problem

[@okmylifemyrules]

@@tahira8344 Bhai mera toh 0 percent pe hi rukh gaya hai

[@tahira8344]

@@okmylifemyrules I got to know afterwards that my pendrive was currupted 🙁 That's why it couldn't get formatted

[@lordchicken9071]

Bro that happened to me but eventually the format randomly worked!! ITS AMAZING!!

[@IndianYakker]

After 100 videos watched problem not solved but your solution ultimate works ....Koti 2 thanks

[@saurabhsharma501]

It was still on 0 percent since morning💀☠️

[@emilianovillarreal3335]

Did it ever work

[@saurabhsharma501]

@@emilianovillarreal3335 never ever ... All the other comments are fake

[@nestgumilar9818]

i think the bigger the disk, the longer it takes ngl, it works on me tho i tried to format 472gb external hdd, takes a bit longer i think its 1 percent per 2 minutes

[@avishkagimhana1215]

Im waiting for 7 hours. Still showing 0😢

[@SaintN-epba]

Me too It's going to 2 hours now still showing 0 percent

[@MrBlue-cd8yw]

It only took a lot of time compared when you format with GUI, but it worked. This is the exact video that I'm finding straight forward no bullshit explanation. Thanks !

[@techgameworld]

Bro.. It is showing that : Diskpart has encountered an error : The parameter is incorrect. See the System Event Log for more information. It is showing after following your steps correctly by watching video at slow speed... Please have a solution against this problem. Please have positive reply..🙏🙏

[@javeria_khalid]

Got the same issue 😪😪 ⚠️

[@siyamrh3623]

did you get solved later?

[@siyamrh3623]

@@javeria_khalid did you get solved later

[@5219spark]

Thanks tried a couple other procedures no luck, your procedure work perfectly.

[@mktech123]

+Jim Secula Welcome Friend.......

[@spidey3031]

Sir, on CMD after 100% complete formatting it is written disk part has encountered an error : The parameter is incorrect. See the system event log for more information. Please provide solution

[@cooleecoolee9504]

Problem: It says "There is no volume selected Please select a volume and try again"

[@sobhan6714]

Same here

[@makemoney2208]

Same here

[@agunzone2.0]

select volume 1 after formate

[@calvinmenttor2394]

​@@agunzone2.0 still didn't work

[@exocetmm38]

I tried this method and after trying to format fs=ntfs it freezes in 0 percent completed and the flash drive light just blinks without doing anything. There is no physical damage to the pendrive. Any ideas?

[@Anakin.25]

Same :(

[@RH.R]

same.. bro, plz reply

[@RBSTempest]

Me too. i need more ideas

[@darincreation8862]

Same🙁

[@Sams_Uncle]

Do it again! Leave it for few hours, and do not disturb your laptop. It works after few hours.

[@Ididnotlikeit]

It says that there are no partitions

[@topnotchsports9420]

Same for me. Did you figure this out? And if you did what do I do?

[@susisalot4910]

@Leano Gamer then what?

[@susisalot4910]

I did it but its telling me options alot do you have a contact so you can help me

[@susisalot4910]

THANKS

[@susisalot4910]

@Leano Gamer that doesn't work I found another method

[@souravthakur2820]

DISKPART> select partition 1 There is no partition selected.

[@liyanth]

mee tooo, i have a * before partition 1

[@Gautam4983]

What solution

[@SajinSA]

@@Gautam4983 put * before partition 1

[@tseegiitseegii2221]

try ( list volume )

[@Kay-ck7ib]

@@tseegiitseegii2221 thanks bro it works for me

[@RamzyExplorer]

Very informative video bhai thanks 🤞😊❤️

[@hamidusman8921]

Great yr maza aaa gyaa…subo sy try kr rha tha kbi koi kbi koi lekin ab ja k hua

[@RaviKiran-pf8dv]

Super solution.. Step by step... Very useful

[@k.k.biswas4295]

Really it is the greatest video ever I have seen. Thank you very much.

[@abubakar-gk6ep]

thanks bro its work❣❣❤❤❤❤

[@TalibHussain-gb5pu]

It took lots off time but it's work bro good ❤❤

[@licpointkasimkota293]

U r genius on computer system tq bro

[@ak12_r68]

When I did it, it stays on 0 Percent? How come?

[@losjokermos5262]

Have the same problem,maybe you found any solution ?

[@gayathrimohandas6278]

Same issue😓

[@simonsamy3204]

did u find any solution?

[@AyyanSamgold]

what a nice bro no more chatting that was good very clear

[@chanakya5480]

Wow it really fixed by problem 😀 100 👉👍 for U

[@Ferozkhan-rm8xz]

The way you show the solution is extraordinary bro keep going I think this is the best video that I ever watched on KZbin and that's the thing that you solve my problem thank you ❤

[@aunghtoo513]

Oh shit. It works! Thank you..Thank you very much!!

[@mrghost9377]

This video is really helped me bro after trying soo much finally thorugh your vudeo i was able to format my sd card

[@kirankumardhule]

Thank you so much I tried many videos but your video works 100% subscribed 😍

[@yisihakmarkos]

Thank you very Much. May God bless you. God may enlighten your mind more.

[@itsfactshorts1666]

Thanks its working bro thanks so much 😍😍

[@yasir7917]

After entering select partition 1 “ There is no partition selected.” Comes

[@Besturtle33]

that pops up for me too any fix yet?

[@basetomar6447]

@@Besturtle33same with me I just continued regardless

[@editingmaster6900]

thanks bro its working

[@mktech123]

Welcome friend

[@Nglty]

@@mktech123 after list partition command Cmd is giving ' * Partition 1 ______' as output

[@boyz86]

Thanks bro, it’s working. Take love, may allah bless you

[@kelompok-_5]

@Streezy yahah wahyuuu

[@venetiasamphenyana3753]

Best video ever in Utube♥️❤️

[@jesreyaggueban1556]

Hey bro I just want to say Thank you so much because your procedure worked giiiii😁💓

[@hanokrao7200]

Thanku mere Bhai ✨ , love you

[@anonymouse8412]

for some reason mine end up like this 100 percent completed DiskPart has encountered an error: The parameter is incorrect. See the System Event Log for more information.

[@prasanjithsp9648]

Thank You for posting such a useful video, shall format the disk at earliest

[@RobertBeriault753]

diskpar is not recognized as an integral or external command, operable command or batch file

[@alphatrick4940]

Eyy it worked tysm.People be patient and follow instructions strictly it worked.Like magic 29 gb came back to me.(If u have problems in slow progress it might be ur usb or hard drive is too big like 32 gb up so it might be a factor tho

[@haroonwaheed3659]

after entering fs=ntfs , i press ENTER. but does not appear. percentage. what to do ? thanks

[@princeajaz9167]

Mine shows disk formatted successfully at end but upon opening my PC again, disk is unformatted. What to do?

[@donakpa4730]

Same with mine

[@MADDOTAKU]

You were the guy i was searching, thanks a lot man

[@ehteshamahmad6172]

It is showing in last 100 percent completed diskpart has encounntered an error: The request is not supported. See the system event log for more information. Plz help

[@trendinggeeklive8386]

Format is not allowed in the current boot page file or hibernation volume

[@asifshuvo1807]

there is no partition selected....... what to do

[@tdsgaming9068]

There is not partition solve this please

[@tronicscott]

not climbing off 0 percent :( how long is it ment to take?

[@unholy7169]

how long did it take you?

[@tronicscott]

After a few trips to the shop I bought it from they realised it was in fact faulty. So I guess it took me 3 days 😅

[@khaimeeee]

@@tronicscott so it's gonna take a year for my 2tb harddrive i think

[@s8vr]

Da profile pic tho :o

[@khaimeeee]

@@s8vr hahha😂😂

[@BruceWaynge]

What a ridiculously unnecessary video all I did was go to disk management and create a simple volume and it worked 🤦‍♂️

[@vickyE24]

When I type select partition 1, I got there is no partition selected , pls what should I do?

[@dark_status6014]

Thank u so much it really work's

[@jamesgjurovich7893]

disk part intervention did not solve problem for my external ssd nor did your vid on windows unable to complete the format now what/ should I take my external ssd and have it checked out?

[@freezekeeper]

Wow! you 're amazing! thank you so much !!

[@graciasg1439]

Thanks alot for this tutorial,it helped me save my hardrive and files.Thumbs up

[@MotasemG]

Thanks Man! You Earned A Sub!

[@dishasuryavanshi7230]

Yeah it worked.. Thanks

[@abdikaniali9744]

hey bro thanks you saved my day

[@HIMANSHUKUMAR750]

After getting 100% it says Diskpart has encountered an error: The parameter is incorrect. See the system event log for more information.

[@AlyssaOloteo]

Same.

[@benudharpadhan1935]

Same problem what happened

[@ehteshamahmad6172]

It is showing in last 100 percent completed diskpart has encounntered an error: The request is not supported. See the system event log for more information. Plz help

[@BureauTechmaster]

@@ehteshamahmad6172 try fat 32 instead nfts

[@yoursgunff9525]

Bro my disk 0 problem then ????.Can I select disk 0?? Because disk 1 is my ssd and also main primary disk

[@we_are_sanatani]

Format is not allowed on th current boot 🥲

[@Artyanimates7523]

1:39 it said there is no partition selected

[@Piyush_Patel143]

Same

[@tamimahmed328]

hello dear, when i write the discpart and press enter then it show me that 'discpart' is not recognized as an internal or external command, operable program or batch file. now what should i do?

[@QueenJeremy]

You spelt it wrong.

[@Corpses_boo]

Its "Diskpart"

[@ujjwal_109]

it is showing there is no partition selected when i type select partition 1 how to fix it please! tell me

[@male678]

I typed list partition, it said, no partitions to show on this disk.

[@homeaccount448]

Same yr

[@chenitiomar]

Try this Creat partition primary (entre) Format fs=ntfs quick ( entre) Exit

[@EasyRider-g1b]

you type "list disk" not list partition

[@macone977]

Great it's working .....Thanks👍

[@jeanhuberson3635]

I did exactly that on 2 SSD one of 2 the other of 4 TB everything works fine but format stays at 0%! I do not see what else I could do. Any suggestion.

[@haniffathima8888]

Thanks a lot, u made my day.. Hats off.. Proper procedure..

[@mailegirl9291]

So far this is the only one that worked after going into the registry, then using this method. So far it's at 66% formatting an NTFS

[@urbad8468]

Mine is saying “there is no volume selected” What should I do?

[@platedpen]

@@urbad8468 when are you encountering this? the partitions or the disks?

[@nickoakaninja]

Thanks a lot my friend you really know your stuff the only video I could that really solve my problem

[@rosejeanmelgarejo3434]

"There is no volume selected please select a volume and try again."

[@jpbadjo7209]

same

[@sparkey642]

Same please help

[@atiqurrehman8060]

Thanks bro it's working

[@paulmossbennett7081]

what if I don't have a partition on my USB and after a "clean" or "create partition primary" unmount my USB?

[@IndianYakker]

Topic should be~ Final solution to format your SD card ....👍😊🤗😁

[@smsami4584]

NOPE

[@cjshorts_]

It shows virtual disk service error after format fs=ntfs

[@DevoteeOfBaba]

Bhai mughe bhi same issue hai yaar

[@VenusUrsa]

Stuck on 0% while trying the format.

[@joestar4sho]

Mine says "the volume size is too small" It's a 64gb san disk but it shows a capacity of 32mb. I need help please

[@amankatiyar7798]

Great work bro.. It still works

[@swtjhilik]

thank u so much..tried so many other methods..its finally working

[@damm_tzy]

bro, what if it says "There is no partition selected"?

[@shubhamveer6346]

Yave you figured this out

[@liamthebox]

Justs do "format fs=ntfs"

[@ehteshamahmad6172]

@@liamthebox It is showing in last 100 percent completed diskpart has encounntered an error: The request is not supported. See the system event log for more information. Plz help

[@yoursgunff9525]

@@liamthebox Bro my disk 0 problem then ????.Can I select disk 0?? Because disk 1 is my ssd is my primary!!

[@meedoalomer]

Format is not allowed on the current boot, system, pagefile crashdump or hibernation volume

[@JOXVOX]

Great video, used this verbatim worked a treat, thanks my friend, keep them coming

[@oysterpolancos1166]

Thanks a lot, It works!

[@iamf9197]

It says( format is not allowed on the current boot, system ,pagefile , crashdump or hibernation volume .)

[@naveennkumar2457]

there is no partition selected..what should i do.. iwant direct format my pendrive

[@iluvall2007]

Thanks bro.. perfectly working👌👌👌👌

[@esth_an]

Format fs=ntfs Virtual Disk Service error???

[@theplk8260]

Same here

[@shinki3586]

@David Significant it doesn't work please help

[@gurpyarsingh1721]

@@shinki3586 format fs=fat32 format fs=ext32

[@abdullahalmamun6453]

not work

[@shinki3586]

@@abdullahalmamun6453 yeah me too

[@divyanshupandey1702]

Error encountered access denied, I was in administrative mode I also tried clean command nothing is working

[@satsports6781]

LordChicken how did you solve the problem brother

[@veeraraju3050]

Thanks and good very useful this video

[@sumaiyafaiz3149]

Tried it but it says that the disk you specified is not valid? 😭

[@away69]

I select the disk an partition, I can see the star next to the disk when I type in list disk which indicates the disk is selected, but when I try to format it still says "There is no volume selected. Please select a volume and try again." It's an SD card that was used in a CCTV camera, so I suspect it's reached its write limit and it's now dead... in the bin it goes! I appreciate your video though :)

[@thederangedhermit725]

I got the same problem. How did you solved it ?

[@tohida9374]

i got there is no partition selected error ! didnt pick partiton for selecting , cant do it bro

[@hanifspiano]

There is no partition selected. How to fix this ?

[@TechnoGamer-gn4fi]

But the percentage is not increasing from 0

[@SetoFPV]

same as me

[@lgaedits]

Same as me too

[@chhatrapal6731]

@@lgaedits wait bro for me its took half an hour but worked in last.

[@lgaedits]

@@chhatrapal6731 thx but i just buyed a new ssd🤣🤣🤣

[@ganeshdhale624]

sir, Format fs=ntfs ke bad Diskpart has encountered an error: The parameter is incorrect see the system event log for more information. He Error yet ahe

[@gustavovieira7]

Every video should be like this, no tralala

[@loknathharish5622]

It's working... Thank u

[@marvindepaula9482]

Why it doesn't move? It's still 0%after an hour

[@mahendrasingh-tn9ju]

Same here!! What worked for you?

[@Bunny77177]

@@mahendrasingh-tn9ju Same here!! What worked for you?

[@johnonato2372]

same

[@mullaalisha2015]

Same

[@AmirAmir-iz4jz]

Perhaps you disk are raw

[@bunty4575]

The format is stuck at 0 percent. Any solution?

[@mikasa1464]

Same bro do you have solution?

[@nitinbvr79]

Awesome... Great Video, very simple and helpful...! 🎉👍👌

[@ravirai9445]

After 100 precent its said diskpart has encountered an error

[@1690dave]

Me too. Did you find a way to fix it?

[@djdjdhddjh5128]

Same problem bro 😭

[@tharakahettiarachchi9977]

Prasant not complete 0 last step

[@sandeepplatform9784]

Same with me

[@teamdragon4261]

Hello bro I have coming a Error There is no partition selected

[@pn2030]

showing this message - "100 percent completed.... : diskpart has encountered an error ; the parameter is incorrect. See the system event log for more information." what does this mean and how to solve the issue further. kindly let me know.

[@Ishhowwspeed]

Can't solve the problem.. when 100% completed my pc says: diskpart has an encountered error

[@chetanliveff]

In List partition command :- The reply is:- There are no partitions on this data to show.

[@ecommercebysherali]

Thanks bro best of luck