MO introduces the new RADICAL RESULTS Solid and PANDEMONIUM

Today MO and Brandon introduce the all new RADICAL RESULTS SOLID and PANDEMONIUM! Check out what the DESIGNER of these balls has to say about their reactions and go grab yourself THE HOOKINGEST BALL IN THE HISTORY OF THE GAME OF BOWLING!
Join our Patreon group "the LAB" to support the channel and get exclusive access and content!
patreon.com/bowlingcience
Be sure to hit the THUMBS UP button if you like what you see, and subscribe to see more Bowling Science content in the future!
If there is something YOU want to see on Bowling Science, let me know in the comments!

[@mauricecornwell489]

Hello gentlemen, I have only been bowling for 6 months. My average has gone from 79, to 98, to 113, 126, and now I seem stuck around 130-139. I bought most of my balls from a thrift store. They are very old ones: 1) 16lb (dark green) Hammer Fab. I believe its urethane. 2) 15lb (golden) Hammer Black Widow. 3) 15lb (blue/green/yellow) Ebonite Mission X. And I bought new: 1) 15lb (black/gold) Ebonite Destiny. A low level hybrid. 2) 15lb Brunswick T-Zone. A lowest level urethane. The two new ones are the only ones that I truly know what they are. I have been watching and learning from your videos and am a subscriber. I am very excited because I have learned to hook a few of my balls, but believe I am limited. I realize that I don't have a a full complementary arsenal and want to build it up and include ones that allow mid range hook and ones that allow deeper hook. I also understand the need for balls at each level for no to low oil, intermediate oil, and mid to heavy oil levels. I have a 6 bagger, two 2 baggers, and one single balls bag. Can you help me and send me, by email or text, your suggestions for building my arsenal? I could be wrong, but I believe it's time to get rid of my older balls. What do you think? Should I hold on to them? Or will the newer one cover what they do? Pastor Maurice [e-mail] [phone]

[@TraumaER]

I want the straightest ball in the history of bowling. No matter what you do, it goes straight to the 10 pin. 😑

[@grandmasteryoda9893]

Its calld spare ball

[@riverwalker2173]

Plastic

[@cameronnorris7089]

@@riverwalker2173 you can still hook plastic depending on your revs.

[@nordattack]

Brandon could hook an ice sculpture. I would prefer to see a wimpy low rev/low ball speed player, like I am, throw the Results Solid. Then we would know how much hook it is really creating.

[@robertreinoehl2805]

Just punched up both balls. Pandemonium is very strong off the spot, Results Solid is drilled 45x4x70....reads the mids extremely well and is very continuous.

[@taysdad45]

I know that guy from Severance Lanes.

[@MikeDomi0618]

great editing mikey

[@jhonviel7381]

in the history of editing videos

[@Fluffyguy958]

Hi I'm looking to replace my old No Rules. It doesn't have a JoPo in it and its already been redrilled so im not bothering with it. I'm a rev dominant low tilt player. What layout would you recommend for the results solid? Great video btw Mikey.

[@BowlingScience]

Thanks! Are you a one hander that uses thumb? If so, something like 60 x 3.75 x 25 will allow you to use the surface and get left while keeping the core tipped to combat your lower tilt. I also might suggest the short pin layout... it's my favorite as 500+ rpm bowler!

[@Fluffyguy958]

@@BowlingScience i was thinking about getting a short pin ball. Thank you for the help sir edit yes I use my thumb.

[@SollaAntonio]

Mikey mon… what’s the track at the end when rolling the results solid? You guys rock, Mo lives in his teachings RIP

[@lorenzogonzales3506]

Awesome ball, Whats the background music at the start? thanks

[@exesemas]

Nice ! How is the total hook rating determined ?

[@glevy17]

These balls looked really good. I haven’t bowled in many years, mostly due to a couple of back surgeries. I wanna get back into it but I need to know what current ball would best replace my morich weapon of mass bias I’ve been using forever. Wasn’t great on synthetic lanes sadly. Any suggestions anyone?

[@BowlingScience]

Hey Greg! The Weapon of Mass Bias had undrilled core specs of .026 Int Diff and .044 Tot Diff and was an additive solid coverstock with particle. That looks really close to the undrilled specs of the Results Solid, which has a textured solid cover (the modern version of older particle covers, but stronger for modern lanes). The only thing is that you would want to make sure you use a layout based on your PAP, as different layouts can result in vastly different motion reaction with the Results core. I would recommend getting a benchmark symmetrical ball like the Bonus Solid as a first ball and drilling it with the pin in a general pinup location 1 inch above and to the right of the ring finger. You and your PSO can then find your PAP and Axis Tilt, which will allow us to create the appropriate layout for something strong and assymetric like your old WMB, with something like a Results Solid. I hope this helps! Let us know how it works out if you choose to go this route!

[@glevy17]

@@BowlingScience thank you so much for the reply, this helps a great deal!

[@atbsigma]

The balls look great and the Pandemonium looks like it might be a good ball for league, but what I want is the name of the instrumental they played when the Pandemonium was being thrown ...

[@frootloops1696]

Throw it on Badger...then we'll see how much it can hook

[@BowlingScience]

Will do!

[@ernestojanniere76]

@@BowlingScience YEH CHALLENGE ACCEPTED!!!!!

[@CurtisL8.3066]

@@BowlingScience Mikey did you drill a results solid?

[@BowlingScience]

@@CurtisL8.3066 yes, mine is 3" pin layout. I shot 781 with it in a previous league night live! It is my favorite modern ball as a 2 hander, gonna drill 2 more

[@brandonkreyer9795]

It might not hook that much but it’ll hook more than any other ball you try on badger :)

[@michaelmorgan5546]

I currently have my Results setup with 70X5X25, would this be a good setup for the Solid, considering I am a low Rev (10-12: 200-250rpm) Low tilt 3-7 left hander?

[@BowlingScience]

5 inch pin is not recommended for low tilt players, actually 5" doesn't appear anywhere in the recommended layouts. Do the same layout with a 3.75 or 4 inch pin. That should work great for this ball

[@edmalz2765]

How has this ball been working for you

[@michaelmorgan5546]

@@edmalz2765 really can't say, I was in a bad place and plugged and redrilled it a few too many times, sorry.

[@edmalz2765]

@@michaelmorgan5546 Thank you for taking the time to respond.

[@geichrismer]

Shoulda called it pindemonium!

[@Tcrror]

Should have*... "Should of" makes absolutely no sense.

[@geichrismer]

@@Tcrror cool

[@jimward278]

like the guru master

[@sports1st]

Good stuff....as always

[@racesmith9510]

I wanna try that ball so bad😭

[@darrinlindsey]

Which one?

[@racesmith9510]

@@darrinlindsey results solid

[@tomy5868]

had a old columbia primal rage that broke more than that.

[@Tcrror]

The original Virtual Gravity was pretty violent, as was the Vertigo (both from Storm, Vertigo being my favorite ball ever). Storm is releasing another ball that they say is the strongest ball they've ever made, so we'll see how this all plays out. EDIT: Proton PhysiX is what I'm talking about.

[@BowlingScience]

Textured Solid Results outhooks everything currently available, and its only .44 total diff. That cover is so strong. Try it yourself in person. This wouldn't be the first time Mo has held the title for strongest ball...

[@robertreinoehl2805]

Results Solid is the real deal. Just punched one up pin under with the PSA on the VAL. I can play 18-5 with no issues

[@darrinlindsey]

I don't understand why it's so necessary to put the second color in the cover stock of balls. I want to see the finger and thumb holes, as the ball is rolling down the lane. Especially with this Results, that blue/green detracts from being able to follow the holes, to know where the different friction levels are on the lane.

[@jrazor28]

Anyone throw the pandemonium yet. How is on backend and pin carry.

[@christianshaffer2988]

My friend has one. It’s a really good ball.

[@elr2141979]

The bowling ball with the most hook ever is the hammer Redemption solid

[@BowlingScience]

That ball hooks alot... but not as much as a textured solid from the same manufacturer...

[@elr2141979]

@@BowlingScience you need to do a side-by-side comparison video or I might have to buy it and results solid just to prove you wrong.

[@bizy2946]

Redemption Solid says otherwise

[@zacknewman300]

What is considered low tilt?

[@vbhashco827]

Under 10

[@jeremybrady1584]

How many drinks is mo during this ???????

[@videll7kelly]

What is the oil pattern.. Looks flooded

[@BowlingScience]

I believe it was Chromium with oil added to the heads. We use almost 50 ft at this house for the house shot!

[@jimward278]

how does the results compare to the big bro flexin

[@MikeDomi0618]

That's not a ball many throw as it's not pba approved. That being said jr at bowler x has thrown both (not back to back) you could ask him. My money is on the results.

[@BowlingScience]

It not even close... the TS cover is so far ahead of anything Korean made as far as chemical friction, and the results uses the only assym core that is designed to be fully effective at a wide range of layouts, without using a balance hole. Radical is 10 years ahead of the game with this one...

[@stevenj5299]

This makes me not want my original results now 😅

[@christinerebstock3656]

The last thing bowling needs is balls that hook more. Go back to 3 piece non reactives that uphold the lane pattens

[@TheLP190mx]

I have the pendemonium pearl and i hate that ball...no matter how much i make that ball rev it never hook down the lane

[@BowlingScience]

That is probably the weakest cover on a Radical ball in many years. It’s great for dry lanes and low speed players though. Have you sanded it?

[@TheLP190mx]

@@BowlingScience no i have not...not sure how to... and my speed is not that high its only from 13 to 14mph depending on how tired i am

[@BowlingScience]

I would take it to your local pro shop and ask to have it sanded to 1000 grit. You can also sand it yourself by hand. I recommend the CtD TruCut pads. It’s hard to tell if it the drilling layout is correct for you in comments, but surface is inexpensive to change and easy to adjust. I would start there.

[@jasongrider3096]

He said it's the hookingest ball in the history of bowling.....I guess he's never seen the rogue cell

[@BowlingScience]

Not even close...

[@jasongrider3096]

You're right I could probably control the hook on the radical.....I always seem to over hook the rogue cell

[@kylercrevier8461]

Hookingest doesn’t necessarily mean Best