In this video, we'll demonstrate how to set up a wireless mobile DJ rig with Dani, Soundboks 4 and Death From Below subwoofers. SKAA wireless is the ultimate way to bring your rig to any gig, anywhere, even in remote locations where you don't have access to power. We also explore some alternative configurations for different applications, how to incorporate headphones, and how to convert your existing wired system into a wireless system. Enjoy! SKAA Official Website ➛ skaa.com SKAA Store ➛ www.skaastore.com SKAA on Instagram ➛ instagram.com/skaasound/ SKAA on TikTok ➛ www.tiktok.com/@skaasound Products featured in this video: Dillinger Labs Dani ➛ www.skaastore.com/collections/skaapro/products/dani Dillinger Labs Streetheart ➛ www.skaastore.com/collections/skaapro/products/streetheart Dillinger Labs Death From Below ➛ www.skaastore.com/collections/skaapro/products/death-from-below Death From Below Manual ➛ dillingerlabs.com/media/1266/death-from-below-owners-manual-040324.pdf Soundboks 4 ➛ www.skaastore.com/pages/soundboks RCA to TS Cable ➛ www.skaastore.com/products/1-4-trs-to-rca-mono?_pos=2&_sid=e86f9b35a&_ss=r Cassandra Mini Wireless Transmitter ➛ www.skaastore.com/collections/skaahomeaudio/products/cassandra SKAA cmd ➛ www.skaastore.com/pages/tlc Chapters: 0:00 Overview 1:20 What You’ll Need 3:47 DJ Deck & Computer Setup 4:19 Dani Transmitter Setup 6:27 Soundboks Configuration 8:30 Mono or Stereo? 10:23 DFB Setup 11:12 DFB EQ Presets 12:49 DFB Audio Routing 13:40 DFB Time Align 15:14 The Magic of SKAA 16:15 Factory Reset 16:35 Range & Battery Life 17:11 One Dani Setup 18:07 Add Wireless Headphones 19:13 Convert Wired System to Wireless 20:58 Wrap-up
@bboymac846 ай бұрын
This is dope! Let’s get this unit out in the wild💪🏽
@mattc4873 ай бұрын
@SKAAsound dumb question: why wouldn't I just use a single transmitter and route the through directly into the soundbok? would that create like an offset in latency between speak and sub?
@SKAAsound3 ай бұрын
You could do that do if you wanted to, you'd just be requiring 2 extra cable runs. For a fully wireless setup you could daisy chain two Danis with the Thrus, but by all means if you're trying to save some money on Transmitters, you could totally take the Thrus straight to the soundboks with a cable, and then use 1 Dani in SKAA Pro mode for the DFBs. Just make sure you have the inputs set to 'line input' on the Soundboks App for each Soundboks Speaker. My suggestion if you use it that way is to set the time delay setting on your DFBs to the "zero" mode (No LED). This adds no latency; whereas modes 4 and 5 are recommended for using SB4 wirelessly. The Zero LED setting is the default setting anyway.
@DjHatRick2016 ай бұрын
I have two soundboks 4 and want 1 dfb. Do I need a dani transmitter? I use the soundboks with xlr , out of my dj controller. Can I connect the dfb to the soundboks 4 without a dani? And ps. Will you make a video where you can test the sound ? 😉 I would love to know how much bass it adds
@bboymac846 ай бұрын
Yea you can connect straight wired in but it defeats the purpose of a wireless system 🤷🏾♂️
@SKAAsound6 ай бұрын
Yes there is a way to do that with Clusters. You make one of the Sounboks a SKAA "Hub" and then the hub can send wireless audio over to the DFB "satellite". Although, the DFB itself does not have any analog audio inputs, so no way to plugin XLR or TRS directly to the DFB. I'll be making a new updated video on clusters very soon!
@bboymac846 ай бұрын
@@SKAAsound can you do a studio set up video?
@corysivell55206 ай бұрын
Would love to see this!
@tspinning3 ай бұрын
@@SKAAsound this is good to know, but it would be very slick to have XLR in on the DFB. Wireless isn't my main goal, battery powered/mobile is my #1 desire w/ ultra low latency (XLR)
@WAVMOB6 ай бұрын
Looking forward to my DFB Subs, what advantages does the SoundBoks Gen 4 have over the Gen 3 when it comes to using it with the DFB subs. The Gen 3 is sinificantly discounted and I am torn between these options
@proavsourceАй бұрын
You should offer these in white, for wedding and corporate events.
@corysivell55206 ай бұрын
Are you going to sell a backpack to put the subwoofer? This would be super helpful !
@ElTeaSeaCM28 күн бұрын
That would be an awkward look
@nodrumsorbass3 ай бұрын
Do you have to use the Skaa transmitters? I see you can xlr to each soundboks, but can you then link the sub to the sb4?
@ethanbraekevelt97442 ай бұрын
I believe that soundboks speakers sound quieter and have less quality through the XLR vs Bluetooth. At least that’s what im experiencing with my soundboks 4. I’m hoping the Dani will fix this issue.
@SKAAsoundАй бұрын
If you don't want to use a SKAA transmitter you have options. (1) you can run a wired signal over to Soundboks via the XLR inputs. Then put Soundboks in HOST mode, fire up your DFB and DFB will bond to Soundboks with SKAA. or (2) you can send audio to Soundboks over Bluetooth, and repeat the process. This is called SKAA Nadja and it allows you to create your own SKAA wireless audio networks. The Soundboks in HOST mode functions as a SKAA Nadja hub transmitter.
@JoeyJumpUp19813 ай бұрын
Ok I thought if I used an XLR cable I could plug my Sounboks 4 XLR Channel 1 into a 15" Rockville subwoofer XLR Left output. It's not working, any ideas?
@SKAAsoundАй бұрын
You should be able to. The Soundboks can accept line levels and microphone level signals, but you might need to download the Soundboks app and connect to it over bluetooth temporarily, then change the input setting from Microphone to Line. I'm thinking the signal coming out of your sub is line level.
@drjust20112 ай бұрын
Id like to see à set up review that features ...8 subs... 2 subs per each soundboks 4..4 stacks. Is soundboks and dfb sub going to make larger speakers.... 130db output minimum.?
@SKAAsound2 ай бұрын
I'm in LOVE with this idea... I just have to round up enough DFB's around the office but I'll try to make it happen for sure!!!
@drjust20112 ай бұрын
@@SKAAsound This is my first exposure to SKAA....it has me very curious, I would like to see more in the wild / in the field video.... What price points area available for larger turnkey wireless systems? 8 subs... 2 subs per each soundboks 4..4 stacks. entire system in stereo with two extra sets of batteries for each speaker.... one speaker stack per corner of a room. how are multiple subs stacked on top of each other and secured so they dont move? How long do all the batteries take to charge?
@doflamingo853 ай бұрын
hello nice video! why not alpha teta portable speaker?
@SKAAsoundАй бұрын
For $100 more you'll get a better speaker with Soundboks. More road durable. 2 XLR inputs instead of 1. SB also has two 10-inch drivers as opposed to only one 8-inch like the Alpha Theta has. So I'm assuming you'll get more sound output. Better battery life on the Soundboks as well.
@M.P.0072 ай бұрын
Hou about stability? The SFB is 15 kg an the SB 16 kg?🤔
@SKAAsoundАй бұрын
I have had no issues when I took them on the road and set up in the wild. The DFB has a really wide "stance" so as long as you're not leaning on the stack, you should be fine.
@AllenGifford5 ай бұрын
Dj system wireless speaker is great.
@PhearNoneGearGadgets6 ай бұрын
Nice set up! I just did a review on Onmis Duo and I mention the Skaa transmitter and receiver in it as an alternative.
@ElTeaSeaCM28 күн бұрын
What's the latency on the Omnis?
@AllenGifford5 ай бұрын
BEST DJ SYSTEM (SOUNDBOK 4 AND DILLINGER SUB AND DENON PRIME GO)
@bboymac846 ай бұрын
I hope they put the Dani unit in a Dj mixer. This way you just turn on the mixer and it connects to the speaker or receiver automatically. Less set up😁💪🏽 it’s very possible because the pioneer A9 mixer sends Bluetooth!
@whittywillshine5 ай бұрын
Inwould assume that Pioneer/ Alpha Theta would use the technology that’s in the wave 8. Great idea for sure though.
@bboymac845 ай бұрын
@@whittywillshine let’s see who does it 1st
@ElTeaSeaCM28 күн бұрын
Bluetooth has too much latency. Way more than these SKAA devices.