This is a great tour. It is always far more interesting to watch a roll cart video than a toolbox tour. And it is even MORE interesting to watch one like this. This type of tour shows the person's priorities and tell you a lot about the type of work they do. It is fascinating to see what someone brings when they have very limited space. As an aircraft mechanic I also enjoy the look into the GSE mechanic's box.
@cheap4x4342 жыл бұрын
Thank you very much.
@MiguelMartinez-hm1hg2 жыл бұрын
You have most of the tools needed you got me that pack out have plenty of space you tool selection 😉 nice from HFT to Snap-on and Matco 😎 great video
@cheap4x4342 жыл бұрын
And there is still a little room for more tools as I need them
@abesebag10852 жыл бұрын
thats alot more tools than i thought you would fit in there, very good for such a small set up
@cheap4x4342 жыл бұрын
It is set up to be taken on airline flights
@maranathayall5 ай бұрын
I can't believe the amount of tools you were able to fit in one bin. Just when I thought you were done pulling out tools, there were like 10 more 😂. I have the Ridgid 2.0 system and I'm thinking about condensing the amount of boxes I have.
@cheap4x4345 ай бұрын
I've found that using canvas bags are the best way to keep everything organized and reduce the amount of space it all takes up.
@OneMechanic2 жыл бұрын
I also didn't think you could fit that much tools in that pack Out. I need to get one now. Very nice selection 😁👍
@cheap4x4342 жыл бұрын
If you are careful on the size of your tools you can fit alot in those packouts
@DonnySimpanero2 жыл бұрын
Those Snap-on pliers are Manufactured by Wilde and rebadged Snap-on. They also are made for Carlyle, Neiko, and a few other brands. Exact same tool minus the Snap-on Price. They run about $20-$25.
@georgecroney61682 жыл бұрын
Whether the tool is cheaper or more expensive you're gonna buy it, price is irrelevant a year down the line. It's nice to be able to know you can get it replaced anywhere, even if you go to another country, you'll proabably find a snap on man.
@cheap4x4342 жыл бұрын
Very true
@rustydogrustydog9191 Жыл бұрын
They’re not the same tool.
@MCCuzImBoredx5 ай бұрын
They may be the same as Carlyle (after looking at pics), but the biggest difference I've found across this design is the lack of the wire cutters in the front jaw above the pivot point.
@thebackwoodsmechanic50292 жыл бұрын
Interesting stuff. Here supporting a fellow tradesman . Keep up the good work
@cheap4x4342 жыл бұрын
Thank you very much
@momentumtintdetail2 жыл бұрын
That is the very best socket set money can buy over bought several of them!!!
@cheap4x4342 жыл бұрын
They do hold up very well and they don't round off bolts
@Tools.indai.6365 Жыл бұрын
I am watching this video 12 time in past six months 😊 i have exact stup likes you ,👍
@cheap4x4347 ай бұрын
That's awesome. How is it working out for you? Have you found anything that you think I should add to it?
@arnoldramos392 жыл бұрын
Great video 👍 thanks
@cheap4x4342 жыл бұрын
Thank you for watching
@leehart9055 Жыл бұрын
Good afternoon from the Great State of Texas. I enjoyed your video. How come you do not have ratcheting wrenches? I have never thought about carry my tools in a big box like yours. Your big box is a good idea. You do carry a little bit more than me. What do you use the crescent wrenches for? I actually stopped carrying mine. Where did you get the 1/4 sockets from? Where is your torque wrench? Thank you and have a good day and be safe.
@cheap4x434 Жыл бұрын
Good evening. I don't carry ratcheting wrenches mostly due to cost. tools in my kit tend to get lost or stolen, so having ratcheting wrenches would cost more then I want to pay in the long run. As for my crecent wrench, it gets used when either I don't know what size I need or more commonly it gets used for making brackets and bending metal. I don't carry a torque wrench, most of what I repair doesn't require being torqued
@cheap4x434 Жыл бұрын
The 1/4 sockets are from Cornwell
@montanawhite56992 жыл бұрын
I did the same battery 24v thing with a crescent wrench. Now I use one with a rubber handle for batteries. The machine got total fried.
@cheap4x4342 жыл бұрын
We all do it at least once. I got lucky and only fried a couple of wires
@montanawhite56992 жыл бұрын
@@cheap4x434 I fried the whole mop/sweeper riding machine thing the boss just bought. Couldn’t get the wrench off for a while.
@cheap4x4342 жыл бұрын
That makes for a bad day
@rhinowastemanagement48972 жыл бұрын
Nice
@cheap4x4342 жыл бұрын
Thank you
@MCCuzImBoredx5 ай бұрын
Do you have a part number for those bent nose vise grips or are those custom?
@cheap4x4345 ай бұрын
They are vise drip 9BN
@MCCuzImBoredx5 ай бұрын
@@cheap4x434 Thanks. I'll have to pick a pair up for my bag.
@daviid772 жыл бұрын
U have more than I expected
@cheap4x4342 жыл бұрын
Thank you. Is there anything you have questions about, or think that I should consider adding?
@gmail5664 Жыл бұрын
what do you work on as a mobile mechanic, planes or cars/trucks?
@cheap4x434 Жыл бұрын
All the equipment at an airport except the planes
@274pacific Жыл бұрын
This guy sockets.
@cheap4x434 Жыл бұрын
They do there job
@camriedesel12022 жыл бұрын
What company you work for? What you work on?
@cheap4x4342 жыл бұрын
I work on everything at an airport except the airplanes.