MOD GUIDE: Elite 2.0 Motoblitz

[@outofdarts]

Want to get started? Save 10% with a complete Motoblitz mod kit: outofdarts.com/products/elite-2-0-motoblitz-2s-mod-kit?variant=40250915651626 Also, if you have any questions about the build, feel free to leave us a reply to this comment or email us: [e-mail]

[@soilderknight7917]

Help my Moto blitz barrel is of and I don’t know how to put it back on thengun

[@Alkatross]

I wish you or somebody else designed motor cages with better vibration damping. Look inside an electric razor.

[@Emerald_Manos]

I really appreciate the fact that you’re using tools that might be more common/available around the house.

[@Blasterhub]

Okay, the dots for lining up the motors is cool. Never thought about doing that (since I just line things up automatically), but for new people that's a great little reminder!

[@Blasterhub]

Also, I know I don't have the time for it, but if you cut off the air blaster barrels toward the base, I think you could arrange to have three mega (two tanks per) or two Mega XL (three per). Effective? Debatable. Fun? Of course!

[@mechanwhal6590]

"MOD GUIDE: ELITE 2.0" Never thought I'd see the day.

[@Si-Fi.51]

You and me both man. . . .

[@MrFeeblweebl]

I've been hesitant to dip into electronic mods. The only one I've really wanted to do was the motoblitz. Can't believe you made such a high quality vid for it. Thank you!

[@timmhaven.j8355]

the silver sharpy for where you are cutting was super helpful, you should do that more

[@outofdarts]

Thanks!

[@roboscout64]

I wish I had this video back when I was modding my own motoblitz, but alas, I was impatient and went at it solo. Definitely spent a lot of time figuring this out, but I did get it done in the end. Ended up making a 3d printable battery door as well that can fit a 3s.

[@pacibels_cannon]

Do you have a file for the extended battery door?

[@jeffreybradley3736]

Got my parts in today to mod two of these blasters. First one is done and I'm loving it. In my case plugging the small holes in the shotgun barrels made tight fitting darts pop out of place while pumping up. Removing the hot glue and using a pick to open the holes up fixed this issue. Two full turns on the relief valve screw allows 12 pumps before air release. This didn't result in a big gain and is about as far as I'll go until I see someone else testing the limit. Thanks Luke .

[@jeffreycarman2185]

Based on what I’m seeing, it is almost as if the Hasbro engineers were planning on people modding. The perfect place for the rev switch and the extra deep battery door both features make modding much easier. This blaster also breaks with other Elite 2.0 blasters in that there aren’t any clips or glue holding the shell halves together.

[@timshooter8033]

Nice mod guide...definitely watch it again when I get my moto-blitz & a mod kit from Out-of-Darts ! Thanks Luke !!!

[@DJReRun]

Thanks again for this Luke. Have to admit that I experienced more than reasonable anxiety from watching you put the shell back on and seeing the trigger spring out of place at 38:11... I'll send you my therapy bill. 😝

[@Hexsyn]

Finally picked one up and excited to mod for the first time in about 2 years! Thanks for the vid mate!

[@dmonhuntr75]

Many years ago I bought a wire stripper like the one used in the video. I use it a few times a week, so it's a very worthwhile purchase if you don't have a pair.

[@Sierra-579]

nice to know there's already mod guides for the motoblitz!

[@spencerbingham7461]

Hey, really enjoyed this mod guide, (great work as always 😁) and one mod that I’ve actually been thinking of developing but something I would love to see is a strayven integration, nit in the traditional way (cutting up a rayven as a stock for a stryfe) but butchering a stryfe to use as a rayven afterburner, or a similar integration with a separate blaster since the rayven isn’t the most available blaster anymore.

[@Timbit901]

For the screw organization I always just draw a picture of the blaster and number the screws to organize them

[@outofdarts]

That's another good way to do it! Nerf used to print a large enough picture on their manuals that you could tape or number the screws there. Alas, they've stopped doing that in recent years.

[@TommyGee.]

Tip: add a quick firing demo + chronograph at end of mod video

[@MrFeeblweebl]

the attention to detail is amazing

[@scottblack2760]

Just scored one of these on Amazon for $25! I think I'll use the sight tube for a laser type light. maybe integrate with the rev switch. Thanks for the great videos!

[@michaels7168]

Excellent guide, think I might do the same to mine!

[@fullarmourtracksuit4023]

I can’t believe these vids don’t end with a firing demo at a target or something once it’s reassembled. I know you demonstrate that it functions towards the end but there’s something unsatisfying about not seeing it actually used.

[@outofdarts]

We appreciate the feedback! This video was a bit of a rush to film before Luke went to his family vacation. We'll try our best to include firing demos in future tutorials

[@JohnJames.]

Was bummed i missed the sales on these. But then i thrifted one two days ago for 5.99 cdn . can justify buying the kit now lol

[@AlexisPrieto]

Eres un Maestro 👨‍🏫 🎉🎉🎉

[@622Superman]

34:48 Did you see that ghost flip the mag release trigger out?

[@metanoba4099]

I wish that air tank can be modded to take mega XL. What a missed opportunity by hasbro.

[@Eulemunin]

Informative and punny.

[@ar.temis696]

A Mighty Mama type thing in the scope would be neat

[@shanmc6457]

Great mod guide as always Luke! Does that new cage fit other Elite 2.0 blasters? Like the Turbine or the Phoenix?

[@Si-Fi.51]

Hey, thank you so much for doing a mod guide on this blaster! I plan to get my own soon and was hoping you would have a video. 100 stars out of five! As I already have 3s Kraken 130 motors, I was thinking about using those instead. Will I still be able to follow along with this video?

[@outofdarts]

Yes, the mod guide should be similar enough to follow along for a 3S build. There may be a challenge finding a battery that fits, but I'm sure Luke will be making an extended battery door soon anyway.

[@Si-Fi.51]

Cool! I actually use 3.7 volt lithium ion AA size batteries. I run those in my 2s stryfe. That way I can run both 2s and 3s!

[@darkwhite1259]

@@Si-Fi.51 don't use those low spec batteries on high spec motors like that.

[@Si-Fi.51]

@@darkwhite1259 what did you mean by low spec?

[@darkwhite1259]

@@Si-Fi.51 using lithium ion batteries is unsafe with high current motors. the batteries you use simply can't safely and reliably supply our hobby spec motors with the current they need to work properly. look up any video on IMRs vs Lipos and you will see what i mean

[@WilhelmScreamer]

Still dying to see an afterburner setup for this

[@Zetson2952]

Earned a sub so imformative

[@Spanglycorn]

This makes me want to get into modding

[@amazedbrick72]

I know this might be an odd question. But is there any way that I could remove the shotgun portion? I doubt there is but if there is please let me know

[@outofdarts]

I mean it's a separate piece of plastic. You may need to pull some clips, but the white "blitz" part should come right off.

[@mhebert350]

please do a modding guide on the infinus

[@ToxicAtom]

How hard would it be to unclip the white part of the shell, so the air blaster is completely removed?

[@outofdarts]

Not particularly hard. It is a separate bit of plastic. Your main challenge would be to fill in the gap in the shell that leaves.

[@Sparroh]

Such a great video, your store is out of the batteries though 😢

[@outofdarts]

We're working on getting a new supplier for LiPos soon. Hang tight!

[@Sparroh]

@@outofdarts awesome, I have like four blasters in waiting! 😁

[@timmhaven.j8355]

I use a magnetic plate for screws sorting

[@randomsteve8]

almost done modding mine. still making my extended battery door.

[@I_like_cereal]

Hey Luke could you do a video guide on painting the motoblitz?

[@Modjammit]

Luke!! Could cut down brass barrel inserts work for tightening up the individual barrels for the pump spreadshot portion of the blaster? You know what I mean, right? ;)

[@jhlando8063]

I just leave the screws inside the shell when I’m modding my blasters.

[@VernardMartin]

Very useful.

[@FlaminFuel]

It's cool but I kinda wish the front iron sight didn't block the scope, and I wish the scope sat a little higher.

[@p-50ps56]

Hey there I'm never done modding before and I'm limited with money and really don't want to mess up. do you know any good blasters to start off with?

[@outofdarts]

Hi! If you're new to modding, Springers are a great and budget-friendly option to start with. The Adventure Force Nexus Pro has a lot of great mod parts to install, as well as spacers and upgrade springs to tune your performance. If you're ready to jump into an electronic mod, a semi-auto flywheeler like the Elite 2.0 Motoblitz, Adventure Force Spectrum, or Elite 2.0 StormCharge is a great option to go for. We'll be making an upgraded flywheel cage and some other mod parts for that last one in the next couple weeks, so stay tuned!

[@JohnJames.]

A firestrike brass it , get a 5 dollar spring from the auto parts shop , be hittinh hard . doesnt need to be brass, anything to fit the dart tighter

[@the_paleopro]

Thanks for clarifying about the short dart pusher and mag adaptor. I reckon that I'll just make it so that I can transition from 'long-dart' to short dart by not glueing the pusher in. Also, another question. Does the mag adaptor work in the Infinus?

[@koenkooiman1490]

Stock flywheel cage looks like the Nerf Halo MA40. But I can't tell if it's compatible.

[@outofdarts]

It might be, but we already have a cage designed specifically for the MA40 on the shop if you're looking to upgrade.

[@kellynguyen4315]

Im new to all this lol i plan on doing this i wanna do short darts. But for my understanding does that mean i can use dart zone half darts ? If i use the 39 size ?

[@thekingofplay8539]

Any chance you'll be designing/printing an expanded battery door for this? I've moved to all 3s builds besides one (old build blade 180s/DRS cage in a Cam that I primaryfor HvZ) and would like to cram a 1000mah-1300mah 3s in the Blitz.

[@outofdarts]

Unfortunately, no. With the vast array of new blasters coming out this summer, we have no current plans of designing a battery door for the Motoblitz.

[@thekingofplay8539]

@@outofdarts that's unfortunate but understandable. Thanks for the reply! And I'll figure something out because I have some fun plans for this one. 🙂

[@ChewedDart]

Are two pieces of Motoblitz shell glued together like other elite 2.0 blasters?

[@oileaderboss]

Amazing

[@kittensfurrbrains1400]

Cool 😎

[@someidiotwithanerfgun]

Could you also just overvolt the motoblitz by getting a 6 AA battery holder and simply stuffing the wires into the original battery terminal thingies?

[@outofdarts]

You could theoretically do that. However, you still might need to rewire the blaster because the PTCs and other circuits in the blaster are expecting only the 6v nominal that 4 AAs provide.

[@622Superman]

Is this worth doing if you want to keep it shooting long darts?

[@outofdarts]

Yes! In fact, full-lengths will perform better (at the expense of accuracy), giving you higher FPS at the same crush.

[@Bob_The_Beaver]

is it hard to do this mod? or not (I have also never done a mod before :/)

[@officialkirbyfan6899]

There Is a Problem with this blaster that no one on KZbin has addressed yet. It does not except the 6 round magazines, the pusher gets jammed for some reason and doesn't fire the darts.

[@thefitness-grampacertest9364]

But when would you use a 6 round mag?

[@chrislarson9504]

um the 6 round mags doesnt have plastic where teh mag detection button. if you want to see what im talking about grab a 6 round mag with a 12 18 mag and you can see the difference the blaster just isnt designed you use 6 round mags

[@chrislarson9504]

go to exactly 7:24 the thing he is grabbing is whats preventing you from using 6 round mags

[@kittenclaws5775]

What mods would you recommend for hitting around 100fps?

[@outofdarts]

The lowest-FPS cage we've tested for the Motoblitz hits around 111 FPS with full-length darts. Just click the 42mm cage spacing option through the link below: outofdarts.com/products/elite-2-0-motoblitz-2s-mod-kit

[@samlindstrom4344]

Hey so what exactly does the Lipo alarm do?

[@jeffreybradley3736]

It is damaging to a lipo battery to discharge below a certain voltage . The alarm plugs into the balance cable and monitors each cell . If any cell falls below threshold , the alarm goes off.

[@samlindstrom4344]

@@jeffreybradley3736 and while i am at it is it safe to use this large lipo battery to any modded nerf blasters i have

[@outofdarts]

If you're getting your motors and LiPos from us, you can find information about compatibility in the listings. Generally, you can run a 2S battery on 3S-rated motors (with lower performance). However, it doesn't work reliably the other way around, as the higher voltage will kill your motors quicker.

[@timshooter8033]

@@outofdarts can you run fang's on 3's ? I heard that you can.

[@outofdarts]

@@timshooter8033 Running any 2s motor on 3s is possible -- Fangs are even recommended for some 3s builds. However, Fangs are not warrantied on 3s because the higher voltages drastically lower the longevity of the motor.

[@mw-bm8pf]

it can use 25rd drum magazine?

[@jaredb_drums6388]

Yo dude

[@muertolamento]

My air tank doesn't work anymore after not even a day, is there anything I can do to fix it?

[@JohnJames.]

Still

[@622Superman]

If these Lipo batteries are so dangerous, then why use them? There's gotta be something out there that's safer and comparable

[@outofdarts]

They're only dangerous if mishandled, and their energy density really can't be matched in the hobby space. If you're really concerned about LiPos, we do offer a couple of IMR options on the shop which are protected cells.

[@boid9761]

Request for a Alpha Strike Flyte mod guide

[@End3rW1z]

Now I know this blaster is screwed and not snap in place.

[@sacredgaggle]

Is the short dart necessary?

[@outofdarts]

No. If you want to shoot full-lengths, you don't need to install the short dart pusher and talon adapter.

[@kirbin2675]

where can i purchase a lippo battery

[@outofdarts]

If you're in the US, our site is a one-stop shop for LiPos that fit in blasters!

[@razorwolf2758]

If I do this I will need my brother’s help this time cause I nearly broke my stryfe

[@charleslaine]

I just wish Hasbro had painted both sides. It looks so plain on the left side.

[@confesor30]

Any idea of the FPS after this MOD?

[@thecaptain1580]

ours quit working after a month ... Motor sounds cooked.

[@05weasel]

V twin mod guide?

[@Duo_edit]

Hey! Can you pls mod the nerf Fortnite p90? To be faster and more powerful, thx man!

[@botsnblasters]

No firing demo?! After all that work?! Luke for shame

[@natelavelle6364]

What about endeared

[@natelavelle6364]

Sorry I meant endware

[@szsirensofmn]

2nd

[@natelavelle6364]

Sorry I meant endware

[@Pnanyapa]

1444th

[@CarRevs24]

why so advanced

[@aelsi1337]

dude please tin your wires

[@jamesblackwood656]

This might be a dumb question, but if I use merlins could I get away with using a 3s lipo?

[@outofdarts]

The main reason we went with 2S is because of the size of the battery compartment. However, if you're willing to relocate the battery, have an extended battery door, or a small enough 3S battery, Krakens, Merlins, and more should be compatible.