[Mod Guide] Nerf Fortnite Tactical SMG (Cage Compatibility Explanation)

[@NaptownNerf]

Table of Contents Opening the Blaster: 0:26 Cage Geometry Explanation: 1:42 Battery Tray Modification: 6:50 Rewiring the Blaster: 10:10 Firing Demo: 20:15 Hopefully this helps a little bit. Don't forget to like and subscribe and happy modding.

[@LightsupernoobYT]

Naptown Nerf hey my styrfe smg e started to break kind of i had to press hard and nearly broke my finger while trying to press the trigger

[@LightsupernoobYT]

But it works perfectly fine besides that

[@NaptownNerf]

@@LightsupernoobYT Open it up, see what's going on in there. May have something to do with the trigger lock.

[@LightsupernoobYT]

Thanks i kind of fixed it but it would still be hard to press the trigger but not as hard

[@LightsupernoobYT]

So if i put it on a scale 1 rould be super hard 10 would be butter so 2 would be before and 9 would be now

[@okami114]

In actual Fortnite this gun was full-auto. Can you do a full-auto mod guide?

[@izziewolf2834]

Since the internals are mirrored from a stryfe, how hard do you think itd be to use a short dart pusher kit meant for a stryfe in this thing? I wanted to mod mine to use katana mags to make it look more like a Tec 9 (the gun it was based off of) because i didnt like how short and thicc the included 6 round mag is

[@nicholasmazzarella2720]

Naptown Fantastic Mod guide video. Thanks for always taking the time to give us such great content. Keep up the great work.

[@MrCashXD]

Thank you for the review I can never find a stryfe and when I do its alot of money so I picked this up so I can maybe mod it

[@andrewg_nerfmods]

Hopefully it should be pretty easy for 3D printing software to just flip a Stryfe cage design and get a mirror image print that fits 💯

[@Wchapel88]

Thank you for the in depth mod guide.

[@totophi]

AAAAAAAAAAAAUGH! A Caliburn mousepad/workpad? Where does one acquire such a gem??

[@blight6080]

Some lube on the trigger might complete this mod. I have 2 of these, neither had any lube on the trigger mechanism and one was missing a hold down screw from the factory.

[@gigglesigh6022]

I have problems with the trigger ,it is hard to pull. But once you pull it its ok untill you let it go and it gets stuck again. I have not modded the gone nor have i taken it apart. Plz help.

[@blight6080]

Same here

[@soniccinos]

Mine too, and after some time it became squeaky. But then I opened it up and put some silicon grease in the moving contacts. It really made a diference, no more noises and the trigger became very light!

[@_fundaemental1100]

Great mod guide.

[@smelker]

Bought this for my son and it eats battery's. In 30 minutes I changed battery's 2 times. Is 15min of use with one set of quality battery's normal in Original state? Thanks!

[@jhaanavlokesh2458]

Please tell me how to make it stop jamming

[@StavoplayzFN]

Does it work with the same cage

[@fgarcia2277]

Thanks for saving me some money, was about to buy one on sale,not now I'd rather just get the stryfe and not worry about compatability.

[@jamesvickery7539]

Great video! How do you heat shrink the t splice joins on the motors?

[@ALPHA.Mods.1]

Thanks for the information on the cages!

[@jarcuadanantus28]

All I wanted to know was what lock to remove or piece to trim im order to make the trigger stop jamming/locking before cracking it open.

[@limciv9729]

I’m doing a half dart mod

[@alarak2159]

Great guide, cheers!

[@gunslinger4104]

Hello like yur vid. Have a Mary Christmas.

[@MrDrake333]

why change the switch? do the ordinary dont work / burn out ? or is it rather a question of how you preferense of recistense in the pressure?

[@custommodz1599]

my little brother is getting one rn do the elite bullets fit in this?

[@ryanengelstad6073]

Super duper!

[@thomasrenelli]

Interested why they would flip the internals. Almost like they don’t want us to mod?! Great video as always!

[@NaptownNerf]

My guess is so they could make the blaster symmetrical.

[@andrewg_nerfmods]

Yeah, a bit weird hey? I guess it keeps the right side clear of having the battery tray door, but the AR-L accomplished this without flipping the internals.

[@kaseymagness510]

Most flywheel buzzbee stuff is like that too...

[@zackary6088]

Andrew G i never had the ar-l, but isn’t it slightly thicker?

[@xj4893]

Could you fit a full auto kit in it ?

[@Polymath2B]

That would make it so much better.

[@zackary6088]

My Name Jefferies unfortunately, judging by the way internals are mirrored, itd be considerably more difficult to make compatibility, but it’s definitely up for debate.

[@pessima_rbx]

help me because my nerf smg-e doesnt work (the gun doesnt shoot but before that the first time i used it it worked then suddenlt stopped working, help anyone?)

[@joaquinojeda1867]

Is is prolly clogged or sum check the top lever thing and pick out the bullet.

[@jaymaniacc7473]

Can I buy it from you

[@godzillainternasionalforce4562]

Make a video how to fix Nerf SMG e Blaster please!

[@trixyvibes3323]

What do I do mine doesn’t shoot

[@kuzzinkru7804]

Can u make it full auto

[@Enryon]

Okay......