Mod to my FPV box goggles for TBS Fusion or RapidFire | Fatshark Recon V3

[@generaciondesilicio8087]

El siguiente video habla sobre cómo hacer esta modificación de manera más sencilla y que ya no sea necesario usar el regulador de voltaje, ni extraer la batería: kzbin.info/www/bejne/m5apoqV7bdx8n9U The next video shows a way for making this mod easier, without having to use the power regulator, neither extract the battery: kzbin.info/www/bejne/m5apoqV7bdx8n9U

[@morshaFPV]

Excelente video!!! Congrats!

[@generaciondesilicio8087]

Gracias. Un saludo

[@elipelele]

Continua, sou do brasil e estou acompanhando

[@generaciondesilicio8087]

Muchas gracias viejo!!! Ahorita estoy editando los videos del siguiente proyecto. Me estoy tardando un poco porque quiero sacarlos todos el mismo mes.

[@NAQFPV]

Thanks for making this video was just looking for a way to add a module. What module did you use and where can I get a step up converter

[@generaciondesilicio8087]

You're welcome. I used the TBS Fusion, but this mod works for RapidFire or any Fatshark module. I think you can buy the step up converter in amazon (look for a good brand. The one I know is Pololu), in the web page of Pololu or maybe in any store of electronic components. Here I've got a couple of links: www.amazon.com/s?k=step+up+converter+5v+pololu&ref=nb_sb_noss www.pololu.com/category/136/voltage-regulators

[@generaciondesilicio8087]

Also, I'm editing a couple of videos that I think will make this mod a little easier and you won't need the 5v step up converter.

[@NordenAgro]

Hermoso video!! Consulta... esta modificación servirá para las recon V2??

[@generaciondesilicio8087]

Muchas gracias Axel! si, nada más tienes que cerciorarte cuando quites el receptor de que las salidas sean las mismas.

[@generaciondesilicio8087]

Tampoco tienen entrada de video av, verdad?

[@NordenAgro]

@@generaciondesilicio8087 no no tienen

[@NordenAgro]

@@generaciondesilicio8087 buenisimo!! vamos a ver que sale!! tenes instagram o alguna red social??

[@generaciondesilicio8087]

@@NordenAgro solo tengo mi cuenta de facebook personal

[@musicachida984]

Buscaba un video así

[@IxOnFPV]

muy buen video bien explicado ... Genial!!

[@generaciondesilicio8087]

Muchas gracias viejo! un saludo.

[@maspurfpv]

👍👍👍👍 🤝

[@junvervasig]

dude youre amazing!!! thank you for sharing this!!! ;)

[@generaciondesilicio8087]

Thank you for the words!! Let me see if I can figure out something for your comment in the other video.

[@junvervasig]

i finally modded mine and add a fusion,. im so happy because the range is out of this world, i mean out of my house flying lol.

[@generaciondesilicio8087]

@@junvervasig You really did it? it is great!! I'm glad everything went good. Congrats!!

[@musicachida984]

Gracias

[@atanaskolev9386]

How i can deactivate SM201r without desoldering?

[@generaciondesilicio8087]

You need to cut power. Maybe you can just butcher the power pin of the video receiver.

[@generaciondesilicio8087]

Or maybe just scratch the board of the receiver near the power, until you cut its path.

[@slipperysebastian]

Amazing!

[@generaciondesilicio8087]

Thanks, man!!

[@andyjpolanco]

What should I do if I rip the video pad on my board?

[@generaciondesilicio8087]

I could not find the trace from video, if you find it you can scratch it carefully just to reveal the copper and solder your wire there, if you don't find it I think there is a resistor or capacitor (I don't remember) at the top of the 5051AM1 that has continuity with the video pad of the receiver. You can also solder your wire there being careful enough so you don't desolder the resistor/capacitor and then, test if it works, if it does, put some hot glue or some liquid isolation tape on it, cause it will be very fragile.

[@generaciondesilicio8087]

The resistor is the R16 is the one at the top of the R17. It is a very little one at the right of the 5051AM1. Watch the red line at the minute 3:51 of this video and you'll find it. You have to solder your wire in the right side, but I don't know if it will work.

[@andyjpolanco]

@@generaciondesilicio8087 oh my god I'm definitely gonna try this I didn't think you would respond 😭. I see the resistor but I might hot glue the left side of it just in case it falls off

[@generaciondesilicio8087]

And the easiest way is this: In front of the video pad you will see a very little hole, carefully scratch the board between the pad and the hole until you find the copper. Solder your wire there and put some hot glue or some liquid isolation tape. After you finish your modd, please tell me how it goes.

[@generaciondesilicio8087]

@@andyjpolanco Before the resistor, try scratching the board where I told you, I think it is better because it's still the beginning of the line.

[@michael1968-m9b]

Would have been better in ENGLISH

[@generaciondesilicio8087]

hahaha maybe!!! but I don't have good pronunciation and I think there are a lot of pretty good channels in english that knows thousands of times more than me. Also (and I think more important) I would like that people in my country, and people who shares language with me could create comunity and access to the information in an easier way.