When using Linux Mint you will want to disable the helper applications: sudo apt remove brltty sudo systemctl disable ModemManager sudo reboot If you are having issues with Linux Mint, Ubuntu Server has been recommended as a better alternative.
@MattJonesYT Жыл бұрын
"Ubuntu Server has been recommended as a better alternative" By who? I first tried installing kiauh on ubuntu and ran into problems with it saying "--allow-releaseinfo-change is not understood in combination with the other options" during the klipper install. I tried removing all of those flags from the install scripts but it just got another type of error so I gave up and am now installing mint
@nongrata140 Жыл бұрын
Can you install your 3d modeling software and slicer on this computer?
@Stampe-OZ0AS Жыл бұрын
@@nongrata140 Bad idea
@rkysx Жыл бұрын
Is it related to the reason why mcu is not detected?
@lutzmowinski97818 ай бұрын
Might be even better to go with Debian directly instead of one of its flavours.
@haenselundgretel6542 жыл бұрын
This is THE video I was waiting for for months! Thank you so much for explaining so extremely well! I really appreciate it a lot!
@ModBotArmy2 жыл бұрын
Happy to hear! I really hope it helps. Thank you for the feedback!
@skapunkzzz Жыл бұрын
@@ModBotArmy it does! You are the man!
@paulminor4707 Жыл бұрын
a free mini PC attatched to my Ikea LACK enclosure is a lot cheaper than getting a Pi :p I am using ubuntu server tho, as it is what i was already familiar with, works perfectly. Kiauh is a blessing!
@TheJacklwilliams Жыл бұрын
Definitly the man! I just got a Sovol SV05 and I want to setup a clipper terminal for it! The creality touch looks great but??? I’m cheap! So, question! Has anyone done the same with a cheap Android tablet? My thoughts are, I’d have touch, and a bluetooth keyboard… If it’ll install, either on Android OS, or bounce that and drop a Linux Distro on it? YAY!!!!
@dumdumreviews74362 жыл бұрын
The lightest Linux in my opinion is Ubuntu server, that has no desktop environment, but if you need a desktop then mint working fine. If you want to have klipper screen n don't wanna buy pi display, you can use your old android phone using usb or wireless, the guide exist on internet. I tried because my Bigtreetech PITFT50 was defect at the arrival so I had to try other way. The big advantage of klipper screen are Z-Offset // Input Shaper calibration directly using the touch screen without g-codes or macros
@FilmFactry Жыл бұрын
I assume the laptop doesn't go to sleep on a long print? If the Laptop were to sleep or shut off is your print dead? Or is the Gcode on the mainboard?
@BBMando692 жыл бұрын
I started running klipper on a laptop over a year ago. I got a ton of crap for it back then. Now i find it funny that others are doing it.
@Lasseu7 ай бұрын
I was running old PC laptop with octoprint somewhere around 2016-2017 and it was the best.
@MrStoffzor2 жыл бұрын
Has anybody found a way to use an ADXL345 (or similar) with this setup? There seem to be accelerometers with a native USB interface, but I'd have no idea of how to get klipper to find that device
@santiagopostorivo Жыл бұрын
With a raspberry pi pico. There are various tutorials that cover this
@MrStoffzor Жыл бұрын
@@santiagopostorivo no need, with native USB adxl it's almost plug and play with the provided instructions by the manufacturer (Trianglelab)
@santiagopostorivo Жыл бұрын
@@MrStoffzor I know they exist. But the option I mentioned is easy and cheap to do. I have done that myself and spent less than 20 dollars
@uncleslapslap Жыл бұрын
[SOLVED] I couldn't access the mainsail GUI with IP or hostname. This is for the step at 12:47 of the video which is the most played part of the video, so possibly others are having the same issue. I disabled the Linux Mint firewall (Terminal/SSH command "sudo ufw disable") and it all worked as described in the video. This is December 2022 with Linux Mint 22.1 (Vera) so I am assuming that when this video was recorded, the firewall was off by default for a new install, or @ModBot had previously disabled it and omitted the step in the video. Hope this helps someone.
@guslaursen5091 Жыл бұрын
You, sir, are awesome. Came to the comments looking for this exact information because I followed every direction up to this point and couldn't log in. Evidently my firewall was still active, but once I ran that sudo prompt, all was good. Thanks!
@Graeme758 Жыл бұрын
Good catch, I got stuck there, too. Once I got in I wasn't faced with his screen though. I had 'klipper reports error, mcu unable to connect.' I clicked the restart option and klipper started up but reported printer not ready. Should I have a printer connected at this point, there was no mention of that in the video?
@chazzwyrabkiewicz8941 Жыл бұрын
Been stuck for 3 days trying to figure out what went wrong..... going to give this a shot
@patrykcalus Жыл бұрын
Thanks !
@SalisOK6 ай бұрын
anyone has any other suggestions? i have this problem.. i can connect from my pc via PuTTY ssh, but via browser nothing...
@TinNguyen-HEICA Жыл бұрын
Hello. If you could make a video about installing Klipper on the Inovato Quadra, that would be awesome. It's a fairly new Single Board Computer and only cost $30. I just bought 2 and installed Klipper on it. It was a very simple process and now it's working great. I hope more people could find and alternative to the overpriced Rasberry Pi in this chip shortage period. Thanks
@g.42792 жыл бұрын
Can you do a video for Klipper on old phones? They seem to be far cheaper than a Pi and are multicore ARM devices.
@MrStoffzor2 жыл бұрын
There are step-by-step instructions if you look around some. You'll need an otg adapter and some way to charge the phone while connected to the printer. I started this process and could ssh into kiauh on the phone but lacked the right cables to hook it up to the printer, so I ended up using an Ubuntu partition on my laptop instead
@DigerTorsk Жыл бұрын
@@MrStoffzor hey i know im 2 months late but i cant find any instructions. Can you help?
@wadebrewer7212 Жыл бұрын
@@DigerTorsk yeah....this seems like an awesome option
@OneHappyCrazyPerson11 ай бұрын
It would add also the camera
@ktostaki56552 ай бұрын
So i tried it and practicly did it but there is a catch not every printer supports it i have a ender 5 pro and my face after doina all work and seeing it wont work on phone was 😢
@kenlee5461 Жыл бұрын
Thank you very much for this instructional video. I found it enormously helpful. I wanted to run Klipper but Raspberry Pis are so expensive. I ended up buying a secondhand Lenovo M73 mini desktop running an i5 4460 for AUD$12.50. I use it to run 3 instances of Klipper. It seems to do the job pretty well. Thanks once again.
@filanfyretracker2 жыл бұрын
One thing I did for my Octoprint Pi that probably could apply to this too. Found my machine in the list of devices on my router and assigned it a static IP in the router's DHCP server. This way the machine always gets the same IP address. Basically you find the MAC address and you can make sure that network device always gets the same IP. you can also just assign an IP static in Linux as long as its outside the range your router uses for DHCP. this just makes life easier especially if you assign your slicer to be able to export right to a printer you will never be trying to figure out the IP if the router decides to change what it gave out when you first set this up. If I could replace the fan in this Intel Atom box I have in a closet id so use that for Klipper or similar if I built a Voron, Pis are basically impossible to find.
@Guardian_Arias Жыл бұрын
yes, good point, not everyone uses static IPs, with MAC address whitelists and forces the router to report the wrong gateway IP when an auto query is received.
@toshlarue Жыл бұрын
Stuck at 13:05 in video says from my main desktop im going to type in the IP address. I cant find were you opened mainsail. I see all installed but not sure how to open it. No icon and confused
@TierNoneOperator8 ай бұрын
I plan on doing this for my E3 S1 Pro, will I need to set up a touch display with klipperscreen or can everything be managed from the PC directly?
@lifetech101 Жыл бұрын
Excellent video. At what point do we plug the printer into the laptop? Can we use a USB hub with 4 ports if we are running 4 printers? Is there anything special we need to do to the printer before plugging it in? Do we use the printer menus still for z offset ect? Thanks
@Graeme758 Жыл бұрын
I needed to know this too. I get stuck at the first log into mainsail, it just says 'klipper reports an error, once it's fixed restart' but no clue what needs fixing. Really wish I had the skills to make Klipper for Windows.
@corey3122 жыл бұрын
How do you hook up the input shaper board using a pc? hopefully there is a way.. also how did you install the z calbration plugin? thanks
@pablograndval5002 жыл бұрын
Hello if possible to aply input shanper analisys on this way of klipper?
@lestertuckeriii1892 жыл бұрын
New to Klipper and Linux and I followed your tutorial but I can not access the mainsail interface from my windows machine and when I enter the IP address with the :xxxx at the end I get a moonraker page that I can do nothing with. Any suggestions?
@jeremyrileysmith Жыл бұрын
New issue....sorta. I have my E3P connecting with no problems, if you see my previous post, you will see that after using a different cable, that appeared to have resolved the issue. But my E3S1 still won't connect. I tried using the same cable at teh E3P with no luck. KIAUH is saying MCU either not connected or not detected. If I plug it back into my raspberry pi, it connects just fine. Just doesn't seem to want to communicate with my linux mint set up. Like I said, the E3P connects with no problem, even with the same cable. Any suggestions?
@Guardian_Arias Жыл бұрын
I hate google, for the past year I've been periodically searching for ways to run klipper without a Pi because it's overpriced and i could by old PC for half the price of a Pi 3 or free with failed or no HDDs. Finally with the search "klipper no pi" this pops up after i get Marlin with input shaper working. side note one can run Linux straight of a thumb drive by creating a live USB and since Kiauh just runs within any debian Linux environment I imagine one can run a Virtual Machine like VM VirtualBox and simply use the you slice your files in. Which for most of us i bet sits right next to our printers.
@maslaczek80s86 Жыл бұрын
Ja miałem problem z uzyskaniem połączenia z drukarka. A problem był w uzyskaniu serialu portu usb. A blokował go skrypt brltty. Wystarczy wpisać w konsoli "sudo apt remove brltty" żeby go osunąć i serial usb był dostępny.
@csdstudio78 Жыл бұрын
Lots of amazing alts today! Orange PI, I've gotten a few to work, creality MKS, BTT cb1... I've tried them all, installed klipper and mainsail. Finally we can abandon Raspberry PI. Done!
@ralfj.9673 Жыл бұрын
I've spent a lot of time looking for a klipper Ubuntu repository that doesn't even exist. Now I've learned that it wasn't necessary. Using KIAUH was much easier. Thanks a lot! 😀
@Graeme758 Жыл бұрын
A great video but this is why Linux will always be niche for nerds. Who wants all this buggering about to install software. Just double click an exe and it's done. Why hasn't Linux caught up with this yet?
@UzunKamis5 ай бұрын
I have an old Mac Mini 2007 which I can install Linux MX only. I woud be very glad if I can make it work with Klipper.
@dtaggartofRTD2 жыл бұрын
I've been prepping to do this on an old HP thin client with barebones ubuntu server. Pis being unobtainium has made a lot of projects more complicated.
@robindijkshoorn3307 Жыл бұрын
I know it is a older vid but it turns out i am a big noob. But what happens between 13:03 and 13:04? Why do you see that screen when you go to your main pc? I'm missing a step apparently?
@ThomasS172 жыл бұрын
If anyone has an issue where they don't get an MCU ID from kiauh, even though the printer is showing up in Linux, try uninstalling brltty. I installed Klipper for the first time a couple days ago and spent 2 days troubleshooting this until I got that tip.
@imac29 Жыл бұрын
doesn't work.
@BlackMixture Жыл бұрын
Awesome tutorial! Excited to try this out, thanks!
@liudas000 Жыл бұрын
As much as you showed - you are using totally wrong distro! Since you are using terminal and ssh only - you dont need GUI at all. So for as compact installation as possible - try using Ubuntu server, during the setup you need to check on ssh and as long as you are using terminal and ssh only - you will be just fine!
@rcvg69420 Жыл бұрын
I've got an old small form factor office computer I was given a while back I use as a bit of a server at home. It's got a 6th gen i5 and 16 GB of RAM so it's pretty beefy. It has Proxmox installed for the hypervisor and as Virtual Machines it runs OPNsense for my home firewall/router and Ubuntu server with mainsail installed on it. It also runs a container for my plex server, a container for my unifi server, and another container for my pi-hole instance. Pretty cool how you can take old hardware thats destined for the junker and give it new purpose like this. I think using an old PC for klipper makes a ton of sense over a raspberry pi just for availability reasons. Also, regarding how much klipper you can run on a PC.... a lot is the answer. A print on my ender 3 with input shaper enabled loads the system like 5% or so? Which isn't much higher than idle which is around 2%. No doubt a PC from even 8 years ago has way more punch than a raspberry pi.
@bcboncs7 ай бұрын
What mainboard are you using on your ender 3? I have ender 3 pro and upgraded to btt skr 3 v2.0. Not sure how I would go about installing klipper and connecting to my 3d printer. Didn't see that mentioned in this video. I also have a NAS with unraid and containers, I'd love to do opnsense at some point too if I can figure out how to multi boot 3 OS from 3 different bare metal hardwares. Anyway that's another rabbit hole haha. Any recommendations on getting my ender 3 pro btt skr 3 v2.0 mainboard working with klipper via a docker container in the lowest cost effort would be appreciated. I put a decent amount of $ into these upgrades and the remote control and input shaping/klipper is the last I desire before I drop 1g on next bambu 300mm bed competitor.
@caseycraig88542 жыл бұрын
Im having a problem with it not allowing me to access it on my pc. gives 403 forbidden error. ive tried to google and can't seem to find a fix for it. any help would be appreciated
@markoschris40852 жыл бұрын
i have the same problem did you find a fix?
@caseycraig88542 жыл бұрын
@@markoschris4085 I've given up on that software. About to use Ubuntu and see if that fixes it. I did xubuntu and it seemed to work better than mint, but I was having some issues with it as well. I'll keep you posted
@markoschris40852 жыл бұрын
@@caseycraig8854 hello i found the solution just type this in the terminal 1. ls -la /home 2. chmod og+x "${HOME}" 3. sudo systemctl restart nginx
@oleurgast7302 жыл бұрын
I used an old Thinclient for Klipper. Theese can be extremly cheep (I paid about $10 for a Fujitsu with D3003 ipx mainboad, 2GB Ram) and also about $10 for an 16GB msata. Worked quite nice, and is extremly cheep. I used normal Debian without GUI.
@ui4lh2 жыл бұрын
I also did the same, and I love it. 1.5Ghz CPU and 8GB Ram expandable to 16. way more than enough for Klipper.
@ModBotArmy2 жыл бұрын
That is awesome. I am so used to shuffling printers around that it didnt make sense to me at first but many do not move their printers around nearly as much and it is a great solution.
@oleurgast7302 жыл бұрын
@@ModBotArmy Actually I intend to upgrade my Anycubic Chiron to Klipper - with a very heavy 400by400 bed being a bed-slinger practicaly cries for input shaping. Due to the big size there should be no problem to integrate the D3003 board directly down in the printers base. As the power supply in stock configuration is at it's limit anyway, it is recommended to use it only for bed heating and a seperate PSU for printerboard, steppers and hotend. As the D3003 can be powered with 24V, I will choose a second PSU with enough current to supply the D3003 also. This is one other advantage of Thin Clients: They are small enough to be integrated in a printer base. You could even use some leg extensions on a prusa mini with prusas printerbase and place the d3003 under it. You just have to upgrade the power supply by one with some Watt more power to avoid using two supplys. While the printer becomes a bit higher, it is as easy to transport as before (even more easy as the stock printer, as with the base PSU and spool-holder are integrated also. As theese boards are designed to be cooled passive, you can place them even in a warmer environment if you simply add a fan. Only if you use the printer inside an enclosure I would recommend to put the Thin Client outside the enclosure as you should to for the PSU also. But a printer with enclosure would not count as a "mobile" device anyway, I guess... (Actually I just transported a mk3s+ inside an Ikea Lack enclosure, stumbled and droped it - luckely just some ugly scratches on one of the doors but anything else survived. An experience I do not want to repeat...)
@rowlandstraylight2 жыл бұрын
Using a hp T620 thin client. It works really well and it is really quick with timelapse renders. It feels much more responsive than a PI when ssh'd in, although some of this might be Ubuntu optimisations that have make Ubuntu feel fast.
@smorrow Жыл бұрын
Anything that comes from a corporate environment, if you need more than one of it you can usually get a good deal by adding _joblot_ to the eBay search.
@Rooki3_ Жыл бұрын
When you installed Linux into your laptop, did you have to install the drivers for your USBs? Or did they work automatically? Also, does the USB drive transfer speed matter? Like UsB2.0, USB 3.0 etc for making the 3d prints? Thanks in advance!
@ntzrmtthihu777 Жыл бұрын
aside from nvidia gpus and old amd ones, plus the odd wireless adapter, about *every common piece of hardware* you could plug into a computer works out of the box on most big distros, especially for bog standard x86 computers.
@chrislosada67012 жыл бұрын
THIS IS EVEN BETTER THAN RUNNING RPi wth... THANKS. Im setting something up some sooner than expected
@ThatOneStopSign2 жыл бұрын
I've been doing this since I first learned about Klipper. Im surprised nobody else really mentioned anything about it
@Graeme758 Жыл бұрын
Probably because it only works if you're lucky or very familiar with Linux. For many of us it is one issue after another, even following the instructions to the letter it gets stuck at some point and support is impossible to come by.
@g.42792 жыл бұрын
Hmm, I wonder if you could do this with a virtual machine running in TrueNAS.
@petername26082 жыл бұрын
Can you make a video on how to use input shaper with pc
@SITnLO Жыл бұрын
Yes please!!!!
@charlesrestivo870 Жыл бұрын
Great video Dudnt understand one word .Think I'll just wait until kipper is common on more printers .Way too complicated
@duncangiven790811 ай бұрын
This video is a fantastic help. I've set up multiple printers on a single pc, using Orcaslicer, it only allows me to upload gcode files to the 1st instance of klipper, is there a way to tell it which printer I'm communicating with? I've tried adding the extra address (:7127) to the IP address output, but it just gives me an error
@magnumra3911 Жыл бұрын
This was super helpful for me! Only issue I had was that Etcher wasn't working right and I wound up having to use Rufus to write the Mint ISO to the flash drive I was using.
@billherrin3465 Жыл бұрын
Same here. Rufus needed to downland some dependencies for the linux distro. Used .ISO instead of DD, to keep the USB drive at full capacity.
@Joebus100 Жыл бұрын
Same here!! I thought it was my USB port or drives. Was going crazy!!
@dobe2050 Жыл бұрын
mee to, etcher dont work, but RUFUS work perfectly :P
@Hector_Creates10 ай бұрын
Can you make an updated video with ubuntu server? that would be AMAZING!
@BenMonet Жыл бұрын
I really like your videos. The question I have for this one, is when you make the firmware, what communication interface do you select for the second printer? If for ther first one I have USART1 PA10 / PA09, then do I pick USART PB06 / PB07 ? Thank you
@Musclemustang351w Жыл бұрын
It's board specific. So if you are using multiple of the same board they will all communicate on the same interface. For example, the octopus pro PA11/PA12. This will be the same for any octopus pro you flash. Where it differs PC side is each config file will have different serials identifying which main board is for each printer.
@lokis248 Жыл бұрын
I am having issues when I type in the IP address. It keeps telling me unable to connect. I have followed the steps up until that point. If I shut down the computer and came back to it, is there something I need to do before trying to connect?
@AdamTheGuitarist10 ай бұрын
I am using a proxmox server, where I created Ubuntu Server VM (could do LXC container or docker, but usb passtrough is much easier on VM) and I am using that for klipper. It has couple of advantages, like backups before updates, easy migration etc.
@AaronTurner-pc5dh Жыл бұрын
this video has got me the farthest so far. I have Linux mint 21.1 installed and was able to go through all the steps up until 13:04 / 17:15. I entered my IP address and got the screen but got an error saying no connections. Is your main desktop running linux too? I am on windows and see there is an ssh server through putty. not really sure where to go from here. the other problem is I did this install on a different server than the one I have at home. Can I re-initialize Klipper and the printer IP address?
@mishokahin2 жыл бұрын
Thank you a billion times over. Been looking for this tutorial for months as I have an old laptop that I wish to install Klipper on but all the other tutorial start by nigh impossible task of getting a raspberry pi.
@infinitewars6373 Жыл бұрын
hardware limitation on a laptop with i5 i would really doubt is a thing unless you have full house with printers..... we are talking rasp pi to run this thing....
@217RockStar217 Жыл бұрын
Dumb question but how is the laptop now running the klipper UI of choice communicating with the printer? Plug in a micro USB? Also input shaping able to be used if I get one of those newer kbus accelerometers? Thank you for replies
@Bennschiiie Жыл бұрын
Hi, i saw your video and i try it, but i have this failure Klipper meldet: ERROR mcu 'mcu': Unable to connect Once the underlying issue is corrected, use the "FIRMWARE_RESTART" command to reset the firmware, reload the config, and restart the host software. Error configuring printer can you help me?
@wakefieldrenovations970 Жыл бұрын
is it Fate? Imagine my surprise after plugging in an old T420 and searching for how to Klipper on a laptop. Great video.
@PunakiviAddikti9 ай бұрын
I tried to install on a really old laptop. Intel Atom processor and 1GB of RAM. It was painful, but here are some tips: Use a high quality SD card reader. Those cheap Chinese SD card readers aren't reliable for jobs like this. I tried a USB drive but it was painfully slow. Be patient. It takes a long time to boot from USB. If you can, use USB 3 ports or boot directly from SD card. My laptop couldn't boot directly from SD card. If your laptop is very old, there's a chance it will simply crash before making it to the end. When booting, choose compatibility mode. If the install fails, re-flash the SD card or try a different one.
@jlef09954 ай бұрын
I have a
@DKFX12 жыл бұрын
What I don't understand is this. if klipper is so much better and faster, then why don't manufacturers install it from factory?
@wyqid5 ай бұрын
I have a Pi 3APlus dedicated for each of my four 3D printers. I also have 2 additional RPi3A pluses. I’ve decided to sell my stash of Pi’s and just use one of my old laptops headless as a multi-instance Klipper server for all my printers. Personally I’m tired of all the fan noise. Each Pi has a fan, plus the dedicated 60Watt power supply has a fan. Between them all it’s a lot of hum.
@fooman2108 Жыл бұрын
I have asked this on various channels that I'm a subscriber to, including 3D printing nerd, but have yet to receive a response. What is the big advantage of clipper that makes it worth the pain of trying to put it on a 3D printer and I have free 3D printers all of which are from different manufacturers so how hard is it to install?
@buyuktaarruz4462 Жыл бұрын
hi bro, How many printers can we connect to 1 pc-laptop? All priters will work at the same time.
@marcioadrianflores94926 ай бұрын
Thanks friend, I'm trying with an old PC that no one uses, it had Windows XP hahaha. But in my country Raspberry pi costs around $200, leaving me without options. It would be interesting if you tried to do it with a cell phone, I was thinking of using one by connecting a charger to the battery with a regulator to avoid charging and the battery swelling over time...
@grifter1964 Жыл бұрын
Has anyone successfully got klipper working on ubuntu server 22.04. Klipper just will not recognize my serial port. I've use the klipper printer config file for ender 3 v2 and modified 'make menuconfig ' as stated in the printer config. Flashed by printer. But I still get an error message in the klipper log "unable to open serial port: [Errno 2] could not open port". Note running 'ls /dev/serial/by-id/* returns to me the port information. Any ideas to what may be going on would be appreciated. Thanks. Also I'm running Ubuntu server on a 2009 mac mini.
@damono865 ай бұрын
Is it possible to choose "Install Linux alongside Windows Boot Manager)? I would like to keep some of my files without having to move them chancing corruption
@matebart4117 Жыл бұрын
Hi. Stupid question from a layman, How to connect the terminal (Dell Wyse3040) to the Spider board. Do you have a link to a tutorial. The second thing is another Linux Distro on 8Gb emmc (my terminal only has that much flash memory). Marcin
@epp91225 ай бұрын
Will klipper launch directly after boot or do you have to launch everything manually every time? I want to be able to shut down the laptop when not in use. And to quickly launch when needed. Like my rpi that only takes 15-20 seconds to get ready to connect via mainsail
@A11istaire Жыл бұрын
this is amazingly helpful , but , Etcher sux ... If you are a computer noob , use Rufus , trust me , rufus won't write block your SD , other than that follow his directions EXACTLY , you will be amazed !
@linaslinas31703 ай бұрын
Nois! But python 2.7 ???? Jeez. Should be using 3.x versions by default
@christopherwhitcomb62332 ай бұрын
Im working with a full on custom open build that I designed myself with several unusual features so I cant use something similar as none exist. its pretty much a full on prototype with all wheel drive 9 drivers for a 1 color printer and my z axis is something never before done. I do have it running off marlin so i know its doable but do you have any recomendations for a tutorial on a full on scratch built config. printers gonna be open shared after a little more testing. thanks
@JasonGillmanJr2 жыл бұрын
I'm curious to why Python 3.x would be experimental. 2.7 was EOL back in 2020
@Andrew_Custodes Жыл бұрын
Kiauh can`t install a Klipper on my EEepc ( Updating package lists failed!) !!!! ((( Dont know what to do with this sh""""""t!!!
@dude770725 Жыл бұрын
Can I run something like mainsail or an printer screen on the actual Klipper Debian laptop, without logging in over ssh from another machine?
@dengrock78495 ай бұрын
If your main laptop is a Mac or PC, maybe your run a virtual linux/ubuntu on it. Then run multiply klippers in the virtual linux. In this case, you need only one laptop.
@clixium Жыл бұрын
This tutorial helped me greatly, I did my install in one evening. I also did input shaper not long after with second mcu and pressure advance, pretty much dialed in everything important. Just a note; linux mint sucks big time, something is very wrong with usb ch341 drivers, I would have to restart my printer few times every time to get it to work. When I tried to add second mcu it would disconnect 1st one. I've had enough at that point, switched to debian10 buster and all problems went away, buster works with atmel chips also, later edition run bullseye and those don't so beaware if you plan to run and flash atmel mcu at some point
@Angelmeister336 Жыл бұрын
How did you connect the accelerometer for inputshaper to your PC/Laptop?
@clixium Жыл бұрын
@@Angelmeister336 I followed this video. Only difference I haven't used pico and axl but arduino and mpu because Ive had that from previous project but principle is the same kzbin.info/www/bejne/jZC5eZWKlNmmkNk
@Angelmeister336 Жыл бұрын
@@clixium Wow thank you, I've already watched that video and wonderd if I could do this with an arduino that is laying around, but you are the proof it's possible!
@scottgarrett6207 Жыл бұрын
Modbot how do you assign one of the ports / instances you created to a specific printer? The reason i ask is the laptop only has so many usb ports. Did you hook up a usb hub and then plug the printers in to that one by one ?
@Dean66613Winchester11 ай бұрын
I don’t understand how you connected the ender to the computer. English is not my native language, I understand correctly, first you need to remove Linux, a clipper is installed on it, but how now to connect Ender 3 Neo to the computer?
@SuperCinemaCraftАй бұрын
Watched this video probibly 12 times in the last week and finally getting somewhere (first time with any Linux
@mikatakalo83768 ай бұрын
Hopefully someday we can have only *.exe driver package to install and just connect usb cable just as in any other printer.
@vasilissimonis3479 Жыл бұрын
I am trying to install Mint on an old laptop and it just refuses to boot from the usbstick, all usb ports are working and confirmed that the flashed usb is ok on my new pc where it booted just fine. I figured that when flashed, the stick gets 2 partitions but they dont show on the old laptop, on the new pc I get 2 boot options from the same stick. any sugestions? tried flashing with Rufus but though it booted to temp desktop, when prompted to finalize instalation it was missing all the files...
@Olle-v3k11 ай бұрын
I have got installed Klipper yesterday in wanted to print today. But everytime I want to start a print I got the code unable to open file. I sreached in the internet for it but everytime I found something about the problem there were just people who are using an RP an not a Laptop. Someone got the same Probleme? Would be nice if there is a solution to fix this Problem.
@soundbreaker2 Жыл бұрын
For the record this only works for 64 bit systems, as last 32 bit compatible Mint version is incompatible with Klipper, and attempts to use other distributions makes you wish you rather shit yourself through your nose than spend more time testing every possible option.
@x7boarder925 Жыл бұрын
I know this video has been out for a while. you helped me out so much when I upgraded by board and could no longer use my stock LCD screen.
@fastfood122 Жыл бұрын
Can we run fussion360 and cura and killper and Linux on the same laptop ? My son is starting a 3d priting hobby and he wants to run kilpper but the laptop that he have is not working for all these applications any recomendatio for a laptop for fusion and cura and klipper and Linux for 3d printing? I will get him a laptop as a gift but have no idea what type laptop to get him if someone can help? thank u
@benjaminkubista1570 Жыл бұрын
When I completed install then clicked restart, I removed usb and it gave me a bunch of rolling errors. Now I can’t load up without error
@stanislawleszczynski3729 Жыл бұрын
So... i got klipper error on configuration. "Klipper reports mcu 'mcu' Can anyone help?
@smorrow Жыл бұрын
Git-bash is just Cygwin; if you have it, you have dd and /dev. None of this "Balena etcher" bs.
@John-gm8ty9 ай бұрын
3:47 it does indeed ask for a password in windows 10. (at least in my non admin account) currently writing to the USB flash drive.
@AgentschapTD5 ай бұрын
When you flash klipper to your 3d printer will you still be able to use the printer firmware to print with sd-card?
@ez2jr2 жыл бұрын
I ran Fluidd and klipperscreen on an old windows tablet, and mount it up, everything is perfectly fit!
@jamescullins27096 ай бұрын
I have a Gateway NV57H77U RUN THE xFCE EDITION OF Mint?
@sobolanul96 Жыл бұрын
Is there any way to install this on manjaro? It uses the pacman install command and yea... not working. I't a noob with linux. Thx
@jonnysimps4 ай бұрын
can you make a turtorial thats only about this installation, because i could do everything until the adding multiple printers part, because i dont know how to turn on mainsail or open it in my windows laptop, i tried opening it in my linux machine which i use for this installation, and i typed in the ip address and its not working
@kokodin589510 ай бұрын
for me the most atractive board to use klipper on would be cheap junk, so probably i would pick up broken laptop motherboard alone, because i would really love to have sd card reader open for gcode and probably would love small screen with simple ui replacing linux gui shell nad have printer as a stand alone device so it would be hilarious to just install firmware on old 8bit discarded ender board and run it from trashed laptop board it would be like 20$ combo in place of overpriced brand new single board computers and you could probably use trashed chromebook for that too
@damono865 ай бұрын
Thank you Brotha, I feel as if I can accomplish harder task (easy for you).
@tpoacher69652 жыл бұрын
Where did you go after leaving the Linux Terminal?
@lsellclumanetsolarenergyll50712 жыл бұрын
@modbot nice nice those T420's are still really good laptops and you can amp them up to 16GB ram even the Lenovo site states 8GB would be the limit
@ModBotArmy2 жыл бұрын
I am pretty sure one of my coworkers at the time recommended it basically as a cheap laptop that Erin could use for school. She inherited my previous gaming laptop which is way more speced out but they are solid work laptops.
@cosmefulanito5933 Жыл бұрын
Python 2.7? I thought it was deprecated a long time ago. Do not forget to upgrade the system.
@mickbastion9 ай бұрын
Hi, can i run all this on a disk partition (virtual disk) of my pc without erasing all the data from the other disk partitions?
@Bukton50002 жыл бұрын
This is what I was waiting for. Thank you for making this detailed video.
@noisy_boi_fpv_39202 жыл бұрын
Can’t believe there not just a windows version madness given that a massive percentage use windows for slicing 🤯
@francescomuzi7698 Жыл бұрын
I have an old all in one pc to use, can I use klipper screen on that? Why you only talk about opening klipper on another machine?
@im_novacon_Ай бұрын
i have been trying this for over 6 hours now and i keep getting the mcu unable to connect error
@3rutu5 Жыл бұрын
Is it true that you've flashed klipper onto a microsoft surface?