Jtag Tutorials #49 Setting Fan Speeds Without FSD

[@tblabs45]

You did it again!! The Jtag world would be lost without you at least some of us :)....Had my system for a week now, everything I needed to know so far - you have it. Very well described ways to get around my system and also get the items downloaded and where they need to be!! Very thankful you took/take the time to make these videos for us!!!!!!

[@akrapovix6614]

Wow. I remember asking you about this a couple weeks ago. Thanks for the tutorial :)

[@grandtheftauto1233]

Preferably use the target temps, this will allow the fans to reach 100% speed if the temps do get too hot, unlike the fixed speed

[@KhalilTheKurd]

Yeeeeeeeeeeeeees! it worked just fine (Y) Thanks a lot man , you are the best!

[@aeroxx]

your videos help me almost daily :D thanks buddy

[@woutersuidgeest1604]

I got a jtagged Jasper Xbox, but I just can't change my fan speed. tried fsd, dashlaunch and the fan speed xex files. I need to put my fan speed lower as it makes horrible noise and since the whole Xbox is around 40°C I think that it won't cause RROD to lower it. You got any idea on what I might be doing wrong? (Or what would work?)

[@oswaldorivera764]

Any solution?

[@CapedLeader]

i have a Falcon what speed do you recommend putting its on 60 at the minute but very loud?

[@VitalityVI]

Well, you could just use a simple rte/rtm tool to change your fan's speed considering most people should have XRPC/JRPC as plugins with neighbourhood installed. That way you don't actually have to boot into anything to change it.

[@AchrefRoubhi]

So for hight games like GTA5 and call of duty what must tampirature should be because my 360 show 82.9 CPU is it normal ??

[@Yaiko_Abdel]

Thank u for all this work man thank u respect

[@Hal-Colm]

Thaaaanks maaan you saved my console from near death

[@greatestpulse9178]

thanks for tutorial but i have question,this is will damage my console if i use for long time?? thanks

[@TheGreatGamer-uz6ns]

Thanks alot now i dont need to switch between fsd and aurora thanks for snother great tutorial :)

[@KhalilTheKurd]

Just what i needed!! I'm gonna give it a try , hopefully works for me .

[@jaimebarbosa7196]

Khalil Ismail

[@harshy1302]

Can you help me with Life is strange . I am able to play episode 1 but when i install episode 2 it gives me an error " Storage device containing DLC have been removed ". Tried installing the Title update but still the same error . Sometimes the game just crashes " fatal crash intercepted."

[@lewiis2000]

Yoooo. Thanks bro

[@chaos4886]

Hei @xXModdedWarfareXx I will soon get a Xenon Jtag, obviously i will put the fan speed at 100%, but what about CPU Target Temp, GPU Target Temp and EDRAM Target Temp? How should i set those for a Xenon? Thanks in advance.

[@BlastModss]

Keep it normal it should be fine

[@mahrukhkhan3005]

hey modded warfare... i have a question... i have a corona rgh 2.0 and now it wont boot idk what has happened....can u help?....there is a blur light blinking every 5 secs....thanks

[@rahilzc3751]

Is it happening after doing this?

[@dupedawn1766]

Do these things kzbin.info/www/bejne/qJmTnq2uqpdje7c

[@RjKME]

so I recently got a jtag and it was aourou dash. I have no clue how to get online and if I need to hook up my jtag to my computer and get rid of aourou dash any help

[@RedragonKid]

What is your console a Slim/S? Sounds like it cause the fan lol

[@xxxxxtrojanxxxxx]

Can you help me set the temp targets ?

[@xxxxxtrojanxxxxx]

And what about the box next the fan speed in dashlaunch? SHould i uncheck it for auto fan speed or what ?

[@chadstudd1616]

+xXModdedWarfareXx awesome tutorials so far helped me out heaps. I was just wondering if you could help i have the latest dash and Aurora and every time I try to launch a XBLA game (scott Pilgram vs The World) nothing happens just stays at the dash, its the only game that happens to. Also what about multi disc games that dont have a content folder in them like Castlevania Lords of the shadows?

[@rafita521]

What's so good about changing the fan speed?

[@MODDEDWARFARE]

+Rafita Huicochea Keeps the console from overheating. Its kind of important. especially for older consoles.

[@orhanmerza7242]

+xXModdedWarfareXx. plz help me my xbox 360 restart wheen start gta v with mode

[@RustysLobbies]

To Prevent RROD Keep Your Console Clean. Like Open It Up Every Fre Months And Clan The Dust Off With A SOFT DUSTER OR PAINT BRUSH. DO NOT USE ANY CLEANING PRODUCTS. Also Make Sure It Is In A Good Spot And Set Fan Speed To About 50-60

[@Redhulk-zw9hq]

+Rusty Lobbies what if I set it to 100 is that bad?

[@shivamssharma5]

1 question why/when should I change the fan speed

[@HYXHost]

+shivam sharma To further protect your console higher fan speeds for certain consoles can prevent RROD

[@shivamssharma5]

thanks

[@authentizitat2659]

SR Gaming Well he is a bitch and a wanna be... He blocked me for nothing, so now I take his customers. LOL

[@HYXHost]

+AUTHENTIZITÄT (ColtonSchein) I blocked you for your language just like now

[@TimmyEliteBmx]

Love your tutorials!! can you do some more emulator videos and maybe some homebrew games tnx, also fsd is said to be back.

[@zacharyoliver9619]

u should do something special for Jtag Tutorials #50

[@eyxtheseller7593]

hows your trinity now (2017) with that config at 50 in dashlaunch?

[@MODDEDWARFARE]

Still going strong :)

[@BlastModss]

what should it be at if I have a falcon?

[@melodiedejong833]

What should I set it on for a corona?

[@zendua]

Is it needed in Aurora???

[@saadghauri3650]

xXModdedWarfareXx plz reply.if I set up LINK in my jtag will I be able to get liquid divinium and xp for black ops 3??

[@saadghauri3650]

+otaku 1 plz reply

[@xxtexansxx44]

Hey xXmoddedwarfareXx can u help me, I can log on with my Rgh bc it has the8015190E error and can't connect to stealth.. Plz help

[@RiseToDefeat]

How about a tutorial on, dvd extract on multi disc games like cod ghost.

[@lablab8204]

Could you make a video about how to install trainers in Aurora?

[@shakirel]

It normal to have a fan loud song in 60% ?

[@xecolossus]

Would you buy 2 RGH xbox's off me?

[@CommonPotatos]

Are these temps good CPU: 56.3 GPU: 52.6. EDRAM: 48.8

[@jasminasalie1643]

What if mine don't have fan speed?

[@shivamssharma5]

My Consol take 1 minutes (literally I timed it once) is there anything wrong with my consol? Please thanks

[@HYXHost]

+shivam sharma If it is a RGH the timing can be anywhere from instant to 5 minutes I believe

[@shivamssharma5]

thanks again

[@Manoj-yl8ib]

no fucking way i have a RGH it takes 10-15 seconds

[@thefox17906]

No way mine is instant! :O

[@shivamssharma5]

james ledger no way dude I just changed some settings and now my xbox turns on by it's self

[@noussberad]

i have xbox 360 slim after glitching it with cr4 everything went smooth and boots as normal, i have noticed that the fan speed is very fast so i tried to install fsd and dashboard to lower the fan speed but it didnt work . i have opened the xbox and check the blue wire in case was running on 12 v mode but the wire was in place not been moved so all the wire are connected properly please help

[@MODDEDWARFARE]

+kakou kaka Maybe the fan speed was modified in the XeBuild image?

[@noussberad]

+xXModdedWarfareXx i dont know as am not an expert how do i change that ?

[@sniperlyfegaming4472]

XeBuild image is part of the application of XebuildGUI it is used when u updated the xbox to a dash board

[@RiseToDefeat]

can you show us how to install custom Notifys?

[@RiseToDefeat]

thank you!

[@hanzmaravillas6524]

I have a question, someone hopefully can answer. I have Trinity, my CPU Temp before using JTAG FSD3 old modchip (delays to booting up, which is normal for old modchip) is only 49c to 54c max. Fan Speed is in Auto-Mode only at FSD Dashlaunch. Since i moved to RGH Aurora, my temps now running at 60c to 64c max. I used 60% Fan Speed at Dashlaunch which i follow to the recommendation with this video. Why did my temps getting higher? Is it normal that RGH or Aurora my temps gets higher than before? Im done cleaning my Console also with a new Thermal Paste.. Can someone help me answer this problem, thanks.

[@IRR730]

try using back FSD3

[@hanzmaravillas6524]

@@IRR730 FSD3 is not compatible with game cover arts or it is hard to get since it is not supported it any longer.

[@The_duck_king1]

thats normal iam also getting 60c - 65 c its fine ,its just bad if it was 80c - 95 c

[@Berr2y]

⁠​⁠​⁠​⁠​⁠​⁠​⁠​⁠​⁠@@The_duck_king1my xbox is getting hot cuz my dashlanch is 40 (fan speed) also i use FSD3 is 80 (fan speed) All i want to fix my fan speed and How much can I increase the fan speed in dashlanch? also FSD3 shoud i do auto Instead of 80? (fan speed) I hope u to understand me

[@The_duck_king1]

@@Berr2y use 60 or 65 fan speed in dash lunch that should work

[@joshuacharles7745]

will my fans get damaged if i play games at 100% speed all the time?

[@MODDEDWARFARE]

+Cheetah Chug Not really. But you don't really need to be running them at 100% unless its a Xenon console.

[@joshuacharles7745]

Owh ok, thanks for the reply.

[@dupedawn1766]

Cheetah Chug if you have trinity 50 or 60 I would do 60

[@youssifahmed2379]

can u show us how to install max payne 3 xbox 360 jtag/rgh??

[@marwanezzat2637]

please i want to play gta v online without link on my jtag

[@waseemgull7339]

Please help me.how to low case temperature

[@bo3gamingwillems779]

Fan speed for corona?

[@orhanmerza7242]

plz help me. my xbox 360 wheen i start mod in gta v restart

[@orhanmerza7242]

+SR Gaming. thx i will try

[@Sleepyfye]

make a tut on how to fx a bad nand dump

[@darius828]

My not function aurora xbox 360 :(

[@Cpt_Sparx]

I have a problem ( this is out of topic of the video) I downloaded Fez and Bastion (XBLA) for my rgh xbox 360 s and when I try to play them, an error comes up saying that I need a system update to run them. The error comes from the stock xbox OS.... What do I have to do to run the game???

[@manassehoduor2531]

i owe you one

[@wessamehab6107]

My xbox360 keep freezing after I found out that the fan in low speed for a while

[@risting-pc-service5150]

pls bro for corona v2 fan speed ?

[@sniperlyfegaming4472]

Whats the best fan speed for corona 260GB should it be more because its old??

[@ModdedXName]

Lee Come on Skype Buddy? you Been Busy... Nice video btw going to start modding again 0.0 just need an HDMI cable.

[@canadatriforcekarambit961]

Does any1 have any knowledge in PCs? I need to get a budget PC that can render shit fast like 11 mins

[@bongoms]

Budget?

[@ModdedXName]

then you are not looking for a budget Pc your looking at over a £1000 or above for that stuff.

[@canadatriforcekarambit961]

+Modded X Name ah thanks dude by budget was $3000

[@HYXHost]

+xXCanadaTriforceXx Get a 8 core AM3+ AMD processor and a 4GB gpu and you should have really good speeds

[@awwstin]

+xXCanadaTriforceXx Really dude... 3 grand would not be considered a 'budget' pc

[@randomweirdguy6862]

i need a kv anyone knows a webpagr

[@randomweirdguy6862]

webpage*

[@awwstin]

Search daily e books they're good

[@TRILLOSQUAD]

Brian Caputo I'm just kidding

[@jacktheninja]

they Finished FSD I like FSD much much better

[@jasminasalie1643]

Please help

[@Tehsnakemods]

With next gen out and everything do ppl still give a shit about jtags/old modding games

[@MODDEDWARFARE]

+Tehsnakemods1337 Yes because the 8th gen consoles are not exploitable yet. When they are I'm sure Jtag/RGH 360's will start to die out.

[@gtadude24245]

+xXModdedWarfareXx heard that the ps4 was jailbroken probably fake

[@KingDan]

+cody thedragondude Thats my game. Still play it til this day

[@flyinglegos]

+gtadude24245 It actually was, it is a kernal exploit.

[@xLiLxSniperx]

WHERES APPNET2!??!?!?!?!

[@glacemodshd7718]

+Tanner Glance YH WHERE IS IT

[@TRILLOSQUAD]

I'm just kidding

[@emiliendementiev]

you leaked your ip

[@CEO_OF_BELLIC_ENTERPRISES]

You obviously don’t know anything about rgh

[@TRILLOSQUAD]

modded warfare sucks

[@Perma]

+melissa debose ouch

[@ipepzii5514]

u suck