Wow this model has come a long way since the last video 3 months ago. Love the attention to detail. Your 3D printed bins of the different sizes really have come together well. And the electronics on the grabber works very well. Love the attention to detail on truck too; puts my 3D printed models to shame. Keep up the great work, love the effort you have put into getting this video together. Well done.
@TassieGarbo9 ай бұрын
Thanks so much mate! Definitely not mate -your models are awesome! Cheers!
@PortStephensgarbo22999 ай бұрын
I want one so bad, and I love the progress you have made with making the garbage trucks and creating your own 3d printed bins and I think you should start up a series of where you make your own mini collection service with garbage green waste and recycling with both of your trucks such as greens and garbage on week and recycle and garbage the next
@TassieGarbo9 ай бұрын
Cheers mate! I was thinking of doing that - that would be awesome!
@PortStephensgarbo22999 ай бұрын
I think so to
@Theguythatrecordstrains8 ай бұрын
Love the ideas
@Theguythatrecordstrains8 ай бұрын
Maybe I can even sell some bins!
@Theguythatrecordstrains8 ай бұрын
*you
@melbgarbofan9 ай бұрын
Awesome, looks really good, the new bins look amazing, arm, body, design are all perfect. Love the little details like the hazard sign, and the tail gate. Very good construction as well, can’t wait to see more!
@TassieGarbo9 ай бұрын
Cheers mate - glad you like it!
@melbgarbofan9 ай бұрын
@@TassieGarbo sure did! Keep up the good work
@WMAC_Master7 ай бұрын
that is an amazing model. Super realistic and functions well!!
@TassieGarbo7 ай бұрын
Thanks mate!
@RecyclefortheUk6 ай бұрын
@@TassieGarbowhere are the mini bins from sorry i might of woke you up bc im in the uk as u can tell.
@Ku-Ring-Gai-GarboАй бұрын
Those Brickwoods look amazing!
@TassieGarboАй бұрын
Thanks mate!
@doohickey-enjoyer9 ай бұрын
Im not a person whos interested in bin trucks, this just popped up in my recommended, but this is so cute dude! Keep going, looks amazing!
@TassieGarbo9 ай бұрын
Thanks mate!
@Garbo4u9 ай бұрын
Im completly amazed by this everything is to detail. That 240 litre brickwood you made is on point Well done mate this could potentially get huge if ypu mass produced them or even try to trademark it and show the big companies like bucher and iveco
@TassieGarbo9 ай бұрын
Cheers mate! Glad you noticed the brickwood! That would be cool - it's the goal to get that eventually!
@Wollongonggarbo9 ай бұрын
Excellent Design mate everything is detailed very well, it amazes me how you have managed to create such a sick craft. Great stuff man looking forward to seeing more videos with this build, keep up the great work 👏🏾 👌🏾.
@TassieGarbo9 ай бұрын
Thanks mate!
@wasteintasmania9 ай бұрын
Awesome mate, great to see another upload. This new truck looks great, love the detailing on the arm and the grabber, I'm sure that would've taken a lot of trial and error to get to where it is today. Love the new mini bins as well. Can't wait to see more uploads mate!! Cheers!
@TassieGarbo9 ай бұрын
Cheers mate, bloody oath it did. I started working on this grabber/arm last November, and has taken so many tries to get it to look even close to a GenV setup. I use 'TinkerCAD', and have about 40 different files full of truck stuff haha. Cheers!
@wasteintasmania9 ай бұрын
@@TassieGarboThats sick as mate. Completely unrelated, but I found a video that included an Aussie Waste Isuzu Raptor drive by and collection at 16:23 kzbin.info/www/bejne/hZmmn5mVns6FnLMsi=n4VJMLEJV9I_7htx First time I can properly appreciate them haha, also included a clip of 71059 in Derwent Valley Council and some of the JJs Buchers
@TassieGarbo9 ай бұрын
That video is sick! So many undocumented areas and trucks. Those Aussie waste isuzus look good, got the newer different sigange on em too! Old mates got the dog along for the ride haha. And first footage in derwent valley! Blokes a legend if only comments were on
@wasteintasmania9 ай бұрын
@@TassieGarbo yeah it was sick, love the clip of 59 looking mint, I used to have a clip of it somewhere shortly before it was sold, looked pretty rough. I remember that newer signage, theres a couple of bins in Kingston with Aussie Waste stickers on them with that logo. Haha yeah, I loved the more layed back energy of Aussie Waste, as little silly little rules as possible (which is what got them into trouble). I really want to get out to Derwent valley and see what they have running now, will try and do that over the holidays. Same, he needs to know how much iconic stuffs in that video. Cheers mate!
@TassieGarbo9 ай бұрын
@@wasteintasmania nice mate! Cant wait to see what you get out that way, Ive been trying to get the thorp 07 acco but he hasnt been running it since I got it last time. Haha aussie waste drivera didnt even have to wear hi vis haha. Also have you noticed that the drivers dont wear seatbelts while operating? I had a read of road rules and garbos are exempt from heaps of stuff if collecti g rubbish and have a flashing/rotating amber light on. Cheers!
@trashmasterchris9 ай бұрын
wow this is amazing dude tbe technology and design kind of reminds me of our first gear trucks here in america just much bigger and better
@TassieGarbo9 ай бұрын
Thanks mate!
@sangeetaalexander67179 ай бұрын
❤😂🎉🎉
@sangeetaalexander67179 ай бұрын
❤❤❤❤❤❤❤❤❤
@georgeosaurus35029 ай бұрын
Man this is most amazing model I have seen yet. I have always been so jealous about America being the only ones to make garbage truck models, for a long time I wanted something like this that actually has an arm on it fucking left side for once. Now I know Australia does models like locomotives and I myself have one in my possession of an steam locomotive, but in the back of my mind I just needed something like this. I like the detail you put into this one but if any sort of feedback would be from me is possibly adding more detail to the cab such as proportioning the grills, but your not at all far from it, in fact this is quite the spectacle you have built.
@TassieGarbo9 ай бұрын
Cheers mate! Me too, I think it is about time we see more models with the arm on the left haha. Yeah I need to work on the cab, this cab is the one off of the old truck and I redid the steps and made a new grille but it really needs just a new cab from fresh I think! Cheers!
@VictorianGarbo9 ай бұрын
I like the Brickwood bins you have made. I'd be interested in buying a couple off you if you ever produce more. Cheers
@TassieGarbo9 ай бұрын
Thanks mate! I reckon I will make a few to sell soon.
@VictorianGarbo9 ай бұрын
Sweet, let me know please@@TassieGarbo
@TassieGarbo9 ай бұрын
@@VictorianGarbo Will do
@finn268 ай бұрын
Amazing video the trucks look insane I was wondering if I could buy one
@WannerooGarbageTrucks9 ай бұрын
As a kid I always had dreams of having a little RC garbage truck sort of thing and thinking how cool it would be to have a mini garbage truck The fact that someone else clearly had this idea and had the practical skills to actually make it is great I hope you eventually make all sorts of different types of trucks maybe even a spak at some point who knows Anyway keep it up this your work is legendary
@TassieGarbo9 ай бұрын
Thanks mate!
@QueenslandRailroadFan3 ай бұрын
3 axel sounds good!
@rachcampbell97304 ай бұрын
Omg I have a 5 year old whos obsessed with garage trucks and bins. He just came across this video ( yep he loves you tube.) And shouted I know what i want for my birthday mummy's. And shows me this video. ( mummy refuses to buy anymore garbage truck and recycling trucks but this is pretty cool) where can i buy one in tassie lol.
@SuperOptimus217Ай бұрын
That's dope AF
@yourlocalgarbo9 ай бұрын
This is so sick nice job
@TassieGarbo9 ай бұрын
Thanks mate glad you like it!
@Pacific_Northwest_guy9 ай бұрын
Thats bad ass, i need one of these dude. Keep up the awesome work dude. You could make alot of money selling those
@TassieGarbo9 ай бұрын
Thanks mate!
@Pacific_Northwest_guy9 ай бұрын
@@TassieGarbo no problem
@kwinanagarbo77269 ай бұрын
WOW man, I have to hand it to you bro you are a very good builder I couldn’t do that or pay 30 bucks for those? Keep bringing these model videos coming
@TassieGarbo9 ай бұрын
Thanks mate! For the mini bins you mean? Cheers!
@wastemanagement_guy5 ай бұрын
I wanna see one of these compact a old minibin
@polegrabba9 ай бұрын
Now you’ve done this, I’ve toyed with the idea to have a crack at making a JJRE sideloader, due my obsession with their massive older 35m units. I’ve thought about it being a lot easier to control the arm speed operation using linear actuators (more expensive than servos😬), however the amount of pivots/linkages in the setup of their lifters adds to the challenge. kinda hard to find the time for a hobby like this when you drive them for 50-60 hours a week. Love the work mate, it’s an absolute tease with the infrequent updates/videos on but it’s understandable with a work in progress. Wouldn’t happen to be able to share what 3d printer setup you’ve got going on?
@TassieGarboАй бұрын
Shit mate sorry it took me so long to reply! I've got a few new ideas and trucks in the works now. That's understandable mate - haha sorry! I've got an ender 3 s1 at the moment but it isn't working. I'm going to try and fix it but I don't think they are especially good. Thanks for the comment mate cheers!
@WasteManagement8289 ай бұрын
Very nice Model and carts! Are u thinking of selling a trucks? And what would happend if a cart fell in and u dident take it out?
@TassieGarbo9 ай бұрын
Thanks mate! Maybe, and the packer in this one isn't strong enough to crush the bins unfortunatley. I'd like to upgrade it in the future though.
@JudahWilliams-xt7qw8 ай бұрын
where did you get it, I really want one.
@PalmyGarbo8 ай бұрын
he made it
@TheGeelongGarb72829 ай бұрын
Sorry I’m late. Anaways awesome like normal mate! Keep it up!
@TassieGarbo9 ай бұрын
Thanks mate!
@Burrtectruckfinder2179 ай бұрын
awesome!
@TassieGarbo9 ай бұрын
Thanks mate!
@Trashmaster183 ай бұрын
Bro plz make a turtorial of how to make one of how to make this and the supplies you need
@MegaDirtyHands9 ай бұрын
I thoroughly love your attention to detail. I have two questions: • is it possible to slow the electronics down to give an even more realistic touch? • Have you consider making and selling these as working models for those passionate about garbage trucks?
@TassieGarbo9 ай бұрын
Cheers mate! Means a lot from you! Yes, theoretically it should be. At the end of last year when I started making this truck one of the goals was to slow the arm down and increase the controllability, as this truck doesn't operate like a Bucher etc., as the joystick acts as a potentiometer to map the arm to a specific position rather than just up of down at a certain speed. Therefore the joystick has to be held in position to keep the arm halfway up. These motors are servo motors which are fairly weak and difficult to control, so I was going to use stepper motors which would allow the truck to be controlled like a Bucher etc. and would slow the arm speed, but I'm not very good at programming so I could not figure it out, however if I was to figure it out I think I would implement it to this truck. I definatley want to, but they take a long time to make. I considered reducing features or making just the arm/body/subframe, but I'm not sure - but to answer your question at some point in the future hopefully. Thanks for the comment mate - cheers! Also, your video of the whithorse GenVs when they were new was very helpful when making the grabber. 😊
@MegaDirtyHands9 ай бұрын
@@TassieGarbo My pleasure, you've done a fantastic job and deserve every bit of kudos for it. Soon enough you'll be enjoying, using the real thing.
@TassieGarbo9 ай бұрын
@@MegaDirtyHandscheers mate, hopefully!
@okiestorm999 ай бұрын
Where can I get a mini binfrom?
@DarkVoidIII9 ай бұрын
The local waste stream gets wooden objects in it occasionally over here. The garbage truck doesn't care, it just compacts it all. What size and grade of wood do you reckon the compactor would safely handle? The real life compactor doesn't care what kind of wood it is, it just busts it apart with several thousand pounds of hydraulic pressure per square inch. Another thing we get a lot of in the waste streams here is styrofoam, the lightweight white molded variety that TV's and most electronic goods are packaged in. Would be interesting to see what scaled down diameter would fit in the hopper.
@TassieGarbo9 ай бұрын
Cheers mate, I reckon this is about the limit of it haha, these motors are pretty weak when running at lower rpm like the packer one does. It would, I'll have to cut up some small bits of it!
@DarkVoidIII9 ай бұрын
@@TassieGarboWith motors for the purpose you're using them for, you need to look at what gives the best torque. More torque will mean better compaction. Scaled down to the model of course. 😀
@Campbelltown-Garbo19 ай бұрын
awesome
@TassieGarbo9 ай бұрын
Thanks mate!
@haydenandchelsea4life20279 ай бұрын
Sup mate Love the trucks btw gl for 600 subs. btw will theses trucks be for sale
@Launceston_garbo19 ай бұрын
Sup Hayden
@TassieGarbo9 ай бұрын
Cheers mate! Thank you - getting close now! And maybe, I need to make my process more efficient and make a few to sell.
@haydenandchelsea4life20279 ай бұрын
@@Launceston_garbo1 sup mate
@southaussiegarbo20549 ай бұрын
You shoul sell the 3d printed minis
@Binlorriessuez139 ай бұрын
Can u make a bin fall in pls
@TassieGarbo9 ай бұрын
Sure mate
@TheShoalhavenGarbo8 ай бұрын
are you thinking of making a spak?
@TassieGarbo8 ай бұрын
Yeah mate working on bin grab now.
@TheShoalhavenGarbo8 ай бұрын
@@TassieGarbo that is great and would it be possible for me to buy a truck once you are done one i know you are not selling one yet but if you can it would be much appreciated
@TassieGarbo8 ай бұрын
@@TheShoalhavenGarbo I reckon mate it would be a lot though like 1000
@TheShoalhavenGarbo8 ай бұрын
@@TassieGarbo oh ummmmm
@TheShoalhavenGarbo8 ай бұрын
Do you think you can make a tutorial video on how to make one so us you are not as smart as you can build one? @TassieGarbo
@refusevehiclesne9 ай бұрын
Great! If I give you my email, would you be able to send me the files for the mini bins if possible?
@TassieGarbo9 ай бұрын
Cheers mate! Sure can, which style would you like?
@refusevehiclesne7 ай бұрын
@@TassieGarboAs many as you don’t mind sharing haha. Do you have Instagram? Would just rather not leave my email in a comments section 😂
@BaysideGarbo1234Ай бұрын
That’s so cool! How did you get those mini brick woods they are awesome 😊
@TassieGarboАй бұрын
@@BaysideGarbo1234 Thanks mate! I 3D printed them.
@NSWGarbo479 ай бұрын
Hey mate, I have a 3D printer and I was wondering if you were able to send me the file to the brick wood bin as I wouldn’t mind printing one off. If you are fine to do that I will give you my email
@TassieGarbo9 ай бұрын
Yeah mate of course, chuck us your email and I'll send through the STL for slicing to a gcode. Cheers.
@NSWGarbo479 ай бұрын
Did you get the email address?
@TassieGarbo9 ай бұрын
@@NSWGarbo47 sent.
@TheAustralianGarbologist9 ай бұрын
do you have any sort of social media i’d love to have a chat with you this is so cool
@TassieGarbo9 ай бұрын
Hey mate yeah I do, got Instagram or discord. Cheers.
@TheAustralianGarbologist9 ай бұрын
theaustraliangarbologist*
@TheAustralianGarbologist9 ай бұрын
instagram
@TheShoalhavenGarbo8 ай бұрын
Do you have discord or facebook or snap? Just want to ask you somthing
@ballina-byronshiregarbo9 ай бұрын
This truck and all those 3d printed mini bins are so amazing!! If you ever are selling any trucks or bins i would love to buy one!!
@TassieGarbo9 ай бұрын
Thanks mate!
@Theguythatrecordstrains8 ай бұрын
And maybe some trucks you can sale to!
@SDRefuse3339 ай бұрын
This is actually incredible. A proper RC garbage truck. I love how you’ve made it so well that it actually looks like a real manufactured model. Stellar work! If I may ask, what motors and method of control do you use? Again, absolutely insanely cool model. Great work. Awesome video!
@TassieGarbo9 ай бұрын
Thanks mate! I used Arduino Unos and servo motors, and little joysticks for control. I will show the controls in the next video! Cheers!
@westaustraliangarbagetruck74309 ай бұрын
I absolutely love this mini model and the bins are so accurate especially those brick woods id love to see this made available to all collectors that want and wish to buy a mini garbage truck or their own and those brickwood 240l I kinda want one would u be able to print a split bin brickwood 240l ? That would be epic anyway can’t wait to see more of this keep it up bro 😎
@TassieGarbo9 ай бұрын
Cheers mate! I certainly could - I'll work on making one!
@kwinanagarbo77269 ай бұрын
Btw did you some of the bins yourself? Bc you’ve done such an amazing job.
@TassieGarbo9 ай бұрын
I did, I made all of the grey bins with black lids, and the green bins with black lids but not the 240l dark green/black lid bins.
@Launceston_garbo19 ай бұрын
Fucking Awesome! I loved how the truck said "stinky" 😂 loved the unloading and the hopper footage. Is this truck based off a Thorp Waste truck? Cheers mate!
@TassieGarbo9 ай бұрын
Cheers mate! Haha yeah, it will get to living up to its name pretty soon I think! Thorp Waste was definitely an inspiration for this truck and especially the two tone. Cheers!
@captainrubbishmannz20239 ай бұрын
Can't wait to see the 80Ltrs get picked up 😮😊
@TassieGarbo9 ай бұрын
I'll chuck a heap at the start of the next video for you mate - Cheers!
@captainrubbishmannz20239 ай бұрын
Thx 👍😊
@captainrubbishmannz20239 ай бұрын
Could you pls make it so the 80's can slip in the grabs pls 🙏
@TheTamakiGarbo08629 ай бұрын
Lovely video mate looks so good the model u did epic wondering if u can do a Hino in future thanks 😀
@TassieGarbo9 ай бұрын
Cheers mate! I definitley can, want to do some other truck cabs in the future too!
@TheTamakiGarbo08629 ай бұрын
@@TassieGarbo yeah and I know they will turn out to a big success 😀
@j.j.richardsfanjakeYT9 ай бұрын
love it mate can not wait for recycling and then green waste should do a glass run like broken up bottles or somthing of course it would be heavy but mabye do a small bit in each bin idk just a idea love it mate have a grate one
@TassieGarbo9 ай бұрын
Cheers mate! Got a couple of bins ready full of steel bottle caps and other metallic objects, sounds good in the hopper. Your idea is great, will definitely do that! Cheers mate - you too!
@SlamminEagle6 ай бұрын
Wow mate this is very impressive! You’re very talented. Absolutely love the 3D printed mini bins, do you plan to print anymore? Would definitely love to buy some if I could. Cheers 👍🏼👍🏼
@mattcur7 ай бұрын
very cool truck. would you sell it for 5k dollars? very very keen
@yungjerd8 ай бұрын
I'd buy this off you mate, this is something I would have always wanted as a kid, hell I would play with it now!! Great work!! Subbed.
@TassieGarbo8 ай бұрын
Thanks mate!
@GARBageFamilyShow9 ай бұрын
I love your work! so inspirational! Roman-
@TassieGarbo9 ай бұрын
Thank you!
@GARBageFamilyShow7 ай бұрын
@@TassieGarbo I hope you will make more really cool videos like this!
@garbo18329 ай бұрын
hey mate if i had given u $200 would u be able to make me one of those trucks let me know
@garbo18329 ай бұрын
or 250
@whisperinthemorning6 ай бұрын
Hi Tassie Garbo, I am a psychologist who has a young client who is a huge fan of your channel. We were looking into 3D printing and were wondering if you were selling the models or the files of the models, specifically of the 140 L Mastec, 120 L Brickwood, 120 L Mastec and the 240 L Brickwood mini bins, and any other models of mini bins that you might have. I would love to be able to get in touch with you to talk about it further as my client is really passionate about bins. Hope to be able to get in touch soon :)
@TassieGarbo6 ай бұрын
Send me an email 😊 I would love to send you some bins. oehengineering@gmail.com
@whisperinthemorning5 ай бұрын
@@TassieGarbo Hello! Thank you so much for responding. My client is really excited to hear back from you. We just sent you an email. Hope to hear from you soon :)
@Joshuasfunandgamesatwar6 ай бұрын
This truck is so cool. I wosh I had one.
@willthetrashman9 ай бұрын
How are you powering this and what motors are you using? Been thinking of making a truck like this for a while now.
@TassieGarbo9 ай бұрын
Servo motors, arduino unos and 6 volt batteries.
@Trashmaster183 ай бұрын
And how to make 3 bins plz bro plz
@Trashmaster1826 күн бұрын
And to make the truck Js one truck pls
@HenryDiers-ho6dk9 ай бұрын
Could you please put the 3D models of the bins online to download because they are so cool?
@RecologySpencer8 ай бұрын
Pretty cool to see a realistic one with the motors to operate the arm! Love the build!
@TassieGarbo8 ай бұрын
Thanks mate!
@Mobnetwork2 ай бұрын
Great talent! I honestly thought it was a shop purchased truck since it looks so well made.
@TassieGarboАй бұрын
Thank you!
@PalmyGarbo8 ай бұрын
hey mate nice vid! is there a chance u could make a gold coast jj richards truck?