Literally this evening, after a long painful (actually, spent with pleasure) three days, I finished the work following your lesson. Despite the fact that I took another Porsche (77' 911 Turbo 930) as a basis, the entire modelling process turned out to be more than understandable and straightforward, albeit with some nuances. Thank you for the very detailed process of working with the "one geometry" method. With it, the result is very stylish and really charming. You have a very promising and cozy channel. I'm really looking forward to your new timelapses and lessons! Wish you more grateful subscribers and strength to continue developing your creativity. :)
@sevengraycubes7 ай бұрын
Tyvm very nice comment :)
@davidaugustofc25746 ай бұрын
They say "if you're too good at something, don't do it for free" But thank you very much for releasing such incredible knowledge for free.
@sevengraycubes6 ай бұрын
My pleasure!
@floorpenguin15 күн бұрын
Great Tutorial! I had to model a car for one of my school assignments and you made it so easy!
@sevengraycubes15 күн бұрын
hope u will get nice grade :) gl
@floorpenguin15 күн бұрын
@@sevengraycubes Thanks lol
@51DEWAY510 күн бұрын
you made my family respect me thx
@sevengraycubes10 күн бұрын
:) well they should respect u no matter of your 3d modeling skils
@51DEWAY510 күн бұрын
@@sevengraycubes a bit more i should say
@01SpeedyXXXX3 ай бұрын
he meant numpad (1) 1:07
@Bogdan115123 ай бұрын
The coolest video I’ve seen in a long while. It is not really a tutorial but it’s much better than that. I’ve learned more from this than I could’ve in a 30+ tutorial series! Easy to watch with a lovely atmosphere. Keep it up and please start doing voice overs 😊
@sevengraycubes3 ай бұрын
ty :)
@TFB-chris5 ай бұрын
Very nice work, it helped me a lot to get into Blender after around 20+ years not using it. Use it or lose it! Despite the fact that the wasteline is a bit messed up (I am a car guy all my life and I cannot unsee it), that thing turned out really well!!!! Thanks
@sevengraycubes5 ай бұрын
Glad it helped!
@samsanimationcorner38209 ай бұрын
This is exactly what I've been looking for. I'm currently working on a 1966 Pontiac Bonneville using this method.
@sevengraycubes9 ай бұрын
great :) gl
@samsanimationcorner38209 ай бұрын
@@sevengraycubes thank you!
@Saunteringvaguely.downwardsАй бұрын
Pontiac gang 🫶 I see so much hate for them 😞
@MrMcgrizz6 ай бұрын
Tip for anyone that has it difficult to fix the geometry after 21:40: before moving out the edges, select them and press: S, then X and then 0. That way they are flat and adjusting them after moving them out is easier. 👍
@nissan34838 ай бұрын
Thank you so much!!! The best video for make a car!!!
@sevengraycubes8 ай бұрын
Tyvm more to come in the future.. :)
@LukezLolz4 ай бұрын
Just subbed! Thanks man ive been wanting to learn how to model cars for a while now. Very underrated
@sevengraycubes4 ай бұрын
tyvm gl with modeling :)
@LukezLolz4 ай бұрын
@@sevengraycubes 😊😊😊😊😊👍👍👍👍👍👍👍👍
@rafaelbrustolin4687Ай бұрын
each ten minutes of the video took me about 1-2 hours, but it was worth it
@sevengraycubesАй бұрын
hope u enjoyed :)
@ghosttt1416 ай бұрын
Thanks man respect because of u I made my frist blender project
@sevengraycubes6 ай бұрын
im glad it was helpfull
@ghosttt1416 ай бұрын
@@sevengraycubes keep inspiring us man we’ll always support u
@retr0_407 ай бұрын
You my guy just earned a subscriber, great work there
@klayz32798 ай бұрын
thank you so much for this tutorial man! helped me a lot on a school project im doing
@sevengraycubes8 ай бұрын
I'm glad it was helpful :)
@SteelRider7 ай бұрын
We are getting A grade with this one 🔥
@calmmind13908 ай бұрын
please continue making toutorial like these really healpful .. if possible please add commentry while doing something so it is easier to understand .. love the video..
@sevengraycubes8 ай бұрын
Ty will be more tutorials in the future...
@bernardb-x4r3 ай бұрын
Evo, nasao sam super thanks opciju
@sevengraycubes3 ай бұрын
hvala velika na donaciji..ako zelis neki od mojih modela mozes zatraziti file preko maila i posaljem ti
@maseyek20163 ай бұрын
Thanks model is the best for mobile games
@Andrew-bw4ur2 ай бұрын
At 21:05 you could use the Inset tool to make the rims
@sevengraycubes2 ай бұрын
yes and for someone who wants to go inset route inset before deleting faces :)
@thomasbrockfeld59198 ай бұрын
Great work - hope you continue 😀
@tayyebahbabar41044 ай бұрын
Fortunately, you can unhide all hidden objects pretty quickly by pressing Alt+H.
@fox-animАй бұрын
There is the subtitles by "srt" file, (it's simpler than your blue color) it's multi-language, you add the file when uploading youtube, and anyone can read the subtitles in their language, that's what I did on some of my videos.
@sevengraycubesАй бұрын
i need to follow time code with subtitle so again have to edit every line
@fox-animАй бұрын
@@sevengraycubes In fact the "srt" file is a text file, there is no need to take out the video editor and re-do an extraction if you want to change 1 sentence, it is the most basic. And yes there is a time code for each timeline, but in general I put "3 seconds" per line displayed. Ask tchatGPT to give you a summary, he knows everything. I put this comment on the SRT, because I saw that you made a huge effort to add a font and color it. Try the SRT with just 2 sentences, you will see that it is very easy, and you will save a lot of time, and it is practical.
@acegamer_253 ай бұрын
This method will work on Autodesk Maya
@muhammadadnanzafar69517 ай бұрын
Thank you so much firstly. Plus guide me, why you do not use Sub Div modifier? Why mature modelers do not recommend it for beginners?
@sevengraycubes7 ай бұрын
Ty. With sub div we are entering high poly relm..lot more work and it need total different aproach..
@KutsugeMindUrmoks8 ай бұрын
This was a very good tutorial!
@sha_aleph02 ай бұрын
need this tut to try making a mod car for fr legends... this is usefull
@RTX1060TIs4 ай бұрын
I tried this method on a Lamborghini Huracan evo blueprint, however, lining up 2 loop cuts (6:00) on the bottom and top of the side glass will not work due to the shape and you'd have to use some different reference point.
@sevengraycubes4 ай бұрын
my last video is lamborgini countach and it worked just fine...every car have top and bottom side glass line so it should work every time...:)
@artur_ku6 ай бұрын
awsome, dude!
@andreslozano36317 ай бұрын
Incredible, new suscriber
@bernardb-x4r3 ай бұрын
Thanks!
@sevengraycubes3 ай бұрын
hvala velika slobodno se javi ako imas pitanja
@coolkid73776 ай бұрын
had to fix the blueprint setup but ima end it off right there for now. its 4 am. When I wake up, thats when I'll face true terror. Good luck for me lmao
@sevengraycubes6 ай бұрын
U can do it! :) gl
@ProfessorBrunoCorrea7 ай бұрын
AMAZING!
@OrdinaryPersonah8 ай бұрын
Love this tutorial ❤ can you make a video about modeling the interior of car lowpoly I mean. Thanks again
@sevengraycubes8 ай бұрын
yes will be interior modeling as well thank you
@HuynhLuong2279 ай бұрын
so cool, thank for detail
@simpletechnicalsoloutions5 ай бұрын
Please tell me how to added the rotation physics to the Car, if you have only animated the Turntable? If you have animated both of them then it's okay, I got it. But if have only animated the Turntable and the Car is rotating due to simple Physics, please explain how to do it. I have already applied Rigid Body Physics, it works on gravity but does not rotate if something under it rotates.
@sevengraycubes5 ай бұрын
u have nice tutorial how to animate a car on you tube go check it out..this tutorial is omly for modeling...gl
@simpletechnicalsoloutions5 ай бұрын
@@sevengraycubes I know hot to animate in Blender. I just wanted to do that by using Physics.
@loopcuthero8 ай бұрын
Cool work! But hey it's not full tutorial though. It's just a timelapse video with no narration.
@sevengraycubes8 ай бұрын
That's a pretty harsh criticism. The video is mostly edited in real time with some timelapse moments where nothing new happens. And instead of narration, I use subtitles. Anyway, thanks for the comment :)
@loopcuthero8 ай бұрын
@@sevengraycubes sorry if I came across as a rude person, I didn't mean to. Continue doing great work 👍
@sevengraycubes8 ай бұрын
@@loopcuthero no no real and constructive criticism allways wellcome just on this one i worked a lot of hours in modeling and editing to provide it to the audience on a simple and easy to understand way...so call it a timelapse kinda strike :)
@loopcuthero8 ай бұрын
@sevengraycubes without s doubt, you're doing great job. I just forgot that I am a buddhist, gotta be kind to people and give it a thought before I open my mouth or type smth. Peace 😊
@EngiNetion6 ай бұрын
appearently a "timelapse video with no narration" can help an absolute dummy like me lol
@your_helios7 ай бұрын
Thank you!! You r cool!
@your_virtuoso7 ай бұрын
Just found your channel and subscribed. Youre doing great I gotta check out the other videos I'll see which car video is best to start
@sevengraycubes7 ай бұрын
Ty have fun :) if u are beginner in Blender I recomend delorean tutorial
@your_virtuoso7 ай бұрын
@@sevengraycubes I think I am. I made a cup a long time ago. Thanks my friend. I will try it later
@sevengraycubes7 ай бұрын
@@your_virtuoso Cups can be very tricky :D :D gl :)
@your_virtuoso7 ай бұрын
very true. lol. Especially the ear @@sevengraycubes
@MrSergoPSV5 ай бұрын
Why didn`t you use "Flatten" and "Relax"? Theese tools would have saved you a lot of time while tweaking the loops.
@sevengraycubes5 ай бұрын
bad habit i guess, lots of room for improvement :)
@sant17677 ай бұрын
pretty dope video
@watchfact4535 ай бұрын
grate. Keep it up !!!
@Lucifer-yv4cg6 ай бұрын
Reminds me of Need For Speed 5:Porsche Unleashed
@unreliablecreature7 ай бұрын
im thinking of making a tatra 53 / t87 using this method. thanks!
@sevengraycubes7 ай бұрын
Good luck!
@ktulhu20009 ай бұрын
Nice work! Thanx for sharing! What do you think about subdivision modifier approach?
@sevengraycubes9 ай бұрын
Thx. If u need photorealistic model its for sure usefull. For low poly modeling like up to 10k polygons not so...
@ktulhu20009 ай бұрын
@@sevengraycubes this is because of it needs extra work or it has some disabvantages? (im learning myself with youtube =)
@sevengraycubes9 ай бұрын
@@ktulhu2000 sub div have low tolerance on triangles ..so it need to be clean topology thats why most of the modelers that uses sub div they do models in separate parts not 1 single mesh....plus its polygon heavy. it all depends what u need...if u need high res model and u know how to handle topology right sub div is right tool.
@ktulhu20009 ай бұрын
@@sevengraycubes oh, that's why.. Thanx!
@beamngdrive6665 ай бұрын
17:15
@01SpeedyXXXX3 ай бұрын
hope you answer me how did you join these two edges together?? 19:32
@sevengraycubes3 ай бұрын
press G then G again pull edge to another edge and auto merdge vertecies option must be selected...upper right corner u see that blue icon :)
@FabioPereiraS6 ай бұрын
This is a real low poly.
@berkanyuksel19975 ай бұрын
33:15
@XirRalph9 ай бұрын
New Subscriber here. Nice tutorial
@sevengraycubes9 ай бұрын
tyvm :)
@evenfunnierguy4 ай бұрын
I'm not sure if I admire, or hate, the way how you absolutely couldn't care less about all the spiky geometry errors you create by beveling & extruding the body lines. It may serve the purpose for this low poly display model, but it makes it impossible to tessellate.
@sevengraycubes4 ай бұрын
Lol love your comment :) just mark sharp at the end it will auto correct most errors. I dont consider myself an artist but i prefer artistic approach over a technical one...less stress and time needed :)
@MANICAT27 күн бұрын
I feel like this video is slowed watch it in 2x speed and you will know
@bernardb-x4r3 ай бұрын
Hello, I wanted to ask a couple of quick questions. And because you mentioned in a comment that you're Croatian, I'll speak Croatian so nothing gets lost in translation. Zanimalo me, u slucaju da trebam imat sve dijelove tijela kao zasebna tijela/mesheve, da li bi bilo moguce da odaberem, primjerice, svaku facu odredenog mesha, primjerice na vratima, i da ih uspijem odvojit od glavnog mesha? Znaci da kreiram cijelo tijelo auta, i da zatim od tog tijela odvojim vrata, blatobrane, haubu, gepek, retrovizore, itd itd itd... I drugo pitanje, citam da neki pricaju o subdivision modifier, i vidio sam u jednom vasem komentaru da kazete da je ovo potpuno krivi pristup za tu metodu. Sto tocno je krivo o ovakvom pristupu? Zadnje pitanje, da li imate slucajno nekakav patreon ili tako nesto da doniram nekaj malo, cisto jer je tesko naci solidne tutoriale. Hvala unaprijed!
@sevengraycubes3 ай бұрын
Pozdrav :) sto se tice prvog pitanja selektiras sve poligone koje hoces odvoit desni klik separate selection i to je to. Sto se tice sub diva moze se koristit u single mesh pristupu medjutim lakse je kontrolirat topologiju ako su djelovi odvojeni. Sto se tice zadnjeg dijela za donacije i hvala vam na tome od srca mozete postati member kanala ili poslati super like s iznosom koji zelite ili imate mail u opisu kanala, pisite mi tamo pa cu vam dat paypal nalog..patreon nemam....sva dodatna pitanja u vezi modeliranja mozete postaviti na mail takodjer..hvala.
@bernardb-x4r3 ай бұрын
@@sevengraycubes Evo nasao sam opciju za super thanks, pa cu sada. A sto se tice sub diva, ako ih odvojim sa separate selection, onda bih i trebao moci koristit normalno subdiv, da? Topologija bi trebala bit normalna ako se ravna po svakom dijelu individualno?
@sevengraycubes3 ай бұрын
@@bernardb-x4r e to je malo skaljivo podrucje jer moze doci do cudnog shadinga ako si recimo slomio bocnu liniju sa linijom od vrata nekim pomakom vertexa onda ce doc do razlike u shadingu tu treba bit precizan i pazljiv ali u principu sub div koristis normalno za svaki dio.
@الكتالوج-م3ط8 ай бұрын
في البدايه قلت اضغط رقم 7 للاعلي ولاكن كنت تقصد رقم 1
@javieravedikian7 ай бұрын
Pffff excellent ✨
@werysgamestudio7 ай бұрын
Fantastic tutorial. How long does it take you tomodel a carr like this?
@sevengraycubes7 ай бұрын
Ty... 3-4 hours
@Arrrr-gj6kk3 ай бұрын
I think there is broken grid, isn't it? Having many non-planar faces
@McTheDev7 ай бұрын
i dont know looks realy clean but how many tri is this
@Andrew-bw4ur3 ай бұрын
In 14:22 how do you focus on the front part ?
@sevengraycubes3 ай бұрын
hide the rest
@rising_tide10637 ай бұрын
36:35 how did you duplicate those faces inside the tire so fast?
@sevengraycubes7 ай бұрын
fill one face select outer edge and press F several times...
@rising_tide10637 ай бұрын
ok cool will try@@sevengraycubes
@azeiku99152 ай бұрын
@sevengraycubes Great videos! How do you do the changing the selected vertex like you do at 23:00 minutes?
@sevengraycubes2 ай бұрын
Ty-- press G X 2 to glide vertex on edge if thats what u asking...
@azeiku99152 ай бұрын
@@sevengraycubes Thank you for the response. That's super helpful too but what I meant was it seems you select a new vertex along the wheel arch. Maybe you are just selecting the next vertex with a mouse click but you seem to move around the arch selecting different vertices and I didn't know if it was mouse click or keyboard stroke. I think in the Maya editor you can select adjacent vertices with the keyboard arrows. Didn't know if that was possible in Blender. Would make it easier to traverse the vertices and just click G + slide the mouse to adjust vertices quickly. Didn't know if you are doing that or just selecting the next vertex with your mouse click. Thanks!
@sevengraycubes2 ай бұрын
@@azeiku9915 select auto merge vertecies then when u reach second one they turn into 1 :)
@braaitongs6 ай бұрын
Is this a good start point to learn how to make car models for BeamNG?
@DiegoLopezElProGamerMexicano8 ай бұрын
Can You Make A Tutorial On How To Make A 3D Low Poly 80’s White Classic Lamborghini Countach From Miami Vice On Blender? Please?
@sevengraycubes8 ай бұрын
will be lot of classic cars tutorials in the future that beast is for sure one of them :)
@DiegoLopezElProGamerMexicano8 ай бұрын
@@sevengraycubes Yay Thank You
@Life_of_Ty6 ай бұрын
When I try to mirror the cube after loop cutting, it became two separate rectangles that are still symmetrical but not one mirrored shape. I don't understand why because I got it to work the very first time and can't recreate it now. Commenting to see if I can figure it out on my own here but so far, I've deleted and recreated this cube like 8 times and its super frustrating to be stuck on the first step.
@sevengraycubes6 ай бұрын
1. check are u in x ray mode 2. check cliping in mirror properties 3, make sure that both front and back vertecies are selected and when u delete them that they are all deleted
@sevengraycubes6 ай бұрын
or do it like this: delete cube/delete mirror modifier/ add new cube/enter edit mode/ select x-ray mode/ delete half of the cube in front view/ add mirror modifier again
@Life_of_Ty6 ай бұрын
@@sevengraycubes The second option is what ended up working for me but I have to say: I GREATLY appreciate how fast you responded, I almost teared up with how helpful and speedy your response was for a FREE tutorial. You are an incredible teacher and I am so grateful for all the work you put into this.
@laddibrar754 ай бұрын
Plz make one video for tractor fs22
@_vi_i7 ай бұрын
15:45 Alt + H* Well, maybe I do
@wraithfleming84274 ай бұрын
Can you send me the blender file you made? I need to hand in an assignment to my teacher lol, and this is my first blender class😭 please and thank you
@sevengraycubes4 ай бұрын
put some effort and make it....thats the right way :)
@oskarpalasz4 ай бұрын
GUMA1? To ty z Polski jesteś?
@sevengraycubes4 ай бұрын
Nope, Croatia
@gelordtube6 ай бұрын
Hi where can I find the premade tire?? 36:20
@sevengraycubes6 ай бұрын
Make one...simple cylinder couple of loop cuts..not hard..
@whinteres7 ай бұрын
THANK U FOR SCREENCAST KEYS BRO!!!!!!!!!!!!!!!!!!!!!!!!!!!! tutorial is very good, but wheres a screen cast keyses?, sometimes i dont understand which a keyses u pressed
@sevengraycubes7 ай бұрын
in this version of Blender had problems with it...in the future will be on allways :) but there are no lot of keys pressed SHIFT, ALT, CTR, S, X, Y, Z, G thats about it :)
@whinteres7 ай бұрын
@@sevengraycubes Oh, I understand, I didn’t know that there were problems in older versions. Well, I generally figured it out until I went to do it myself, relying on other guides. anyway, thanks for the video, it helps a newbie
@JC_25103 ай бұрын
Quick questions. 1. Why your vertex dots are green. 2. How your moving the vertex perfectly.? 8:19 ( i mean it's not going anywhere else in wrong direction how it's controlled.? )
@sevengraycubes3 ай бұрын
in blender preferences u can change color of anything...vertex size and color as well...regarding other question press G then axes (x,y,z) to lock vert movement to axes...
@JC_25103 ай бұрын
@@sevengraycubes okay tying to make Mustang I'll let you know when it finished..can you provide your IG plz.😊
@sevengraycubes3 ай бұрын
@@JC_2510 dont have IG im old school u can find me on discord sevengraycubes
@AliakseiKhauruta5 ай бұрын
and how to make a tractor according to the drawing?
@chiminsdoh67956 ай бұрын
Hey!I m newbie in Blender, how did you do t his thing at 18:46?
@sevengraycubes6 ай бұрын
that thing is called inset select face u want to inset and press I...or press E then S.
@chiminsdoh67956 ай бұрын
thanks!@@sevengraycubes
@inesallam51492 ай бұрын
@@sevengraycubes thank you for clarifying ☺
@KanishkBhidoriya8 ай бұрын
At time line 19:23 which hot key u clicked for making hood and i think u should on the indicator which key u clicked ❤❤
@sevengraycubes8 ай бұрын
G on Z axes so G Z :) in blender 4.0 that key clicker not working need to find some alternative...
@KanishkBhidoriya8 ай бұрын
@@sevengraycubes I am using 4.0.2 but unable to do that please help me 🥹🥹
@sevengraycubes8 ай бұрын
not sure what is the problem...select some faces press G(to move them) then press axes u want to move them on, in this case Z...should work...
@KanishkBhidoriya8 ай бұрын
@@sevengraycubes ok I will try
@ПлатонТюшев6 ай бұрын
Как называется эта машина?
@malitver6 ай бұрын
For Unity Game, 9000 polygons is normal ?
@trainee54717 ай бұрын
Watched this because it had a Porsche in it
@おつまみ乳首3 ай бұрын
How do you do a reduction like 31:43?
@sevengraycubes3 ай бұрын
select part u want to separate right click separate - selection
@おつまみ乳首3 ай бұрын
@@sevengraycubes Sorry, I don't know how to do the reduction to center the body before separation.
@sevengraycubes3 ай бұрын
@@おつまみ乳首 thats basic inset press I to inset :)
@merynndeveze7733 ай бұрын
Hello ! I need some help haha im stuck at 17:17 in the side bar i dont have the Edit bar (side bar: View Tool and Item). Can someone help me plss :)) Good video !
@sevengraycubes3 ай бұрын
press N it will reapear :) and if u are missing loop tool options eneble loop tool addon in preferences :)
@merynndeveze7733 ай бұрын
@@sevengraycubes OHHH it worked haha !! Thank you for your speed and reliability. :))
@sevengraycubes3 ай бұрын
@@merynndeveze773 anytime :) enjoy modeling...
@merynndeveze7733 ай бұрын
@@sevengraycubes Sorry i'm stuck again which key did you press at 18:46 ? :)
@merynndeveze7733 ай бұрын
nevermind i found it was i !
@NimrodMkinahd-pc2tw9 ай бұрын
I am beginner which tutorial i must start in order to understand well modelling low poly car
@sevengraycubes9 ай бұрын
kzbin.info/www/bejne/bIvCfZd7otqmaaM this one is more beginner friendly so start with it
@firebluesky-jc8sq4 ай бұрын
How do i find the premade tires?
@sevengraycubes4 ай бұрын
studio.kzbin.infoW6BVralreJ4/edit
@ksp4u7 ай бұрын
35:24 I pressed SOX but nothin happend. plese guide me.
@sevengraycubes7 ай бұрын
could be lot of things...best way to practice this is in new project add a plane and a loop cut. Twist a bit that loop cut and press S 0 then all 3 axes X,Y,Z and see what it does...that way u will understand what is going on so u can apply it in your future projects..in this case maybe its just wrong orientation of object...so u need to press S,0,Z and it will work...gl.
@ChillieGaming7 ай бұрын
Hey man i have a question How do u model a car which doesn't have any blueprint available?
@sevengraycubes7 ай бұрын
without references its hard to hit proportions for rest u dont need blueprint...just imagination...
@ChillieGaming7 ай бұрын
@@sevengraycubes would like to see u do car interiors as well one day.
@sevengraycubes7 ай бұрын
@@ChillieGaming wil be interiors in the future...
@vaishnavhon47317 ай бұрын
Hello sir, can I use the same method to make the high poly model.
@sevengraycubes7 ай бұрын
u can try but for high poly models i suggest sub div and separate panels not 1 single mesh...
@mrhanan92219 ай бұрын
Where do you find hd imgaes bro ?
@iamrahulartshort4 ай бұрын
Bro you adding images bg i can't understand stand front vew where, top view I'm follow your video but not working 🥲
@muiwols67092 ай бұрын
This is at least mid poly.
@sevengraycubes2 ай бұрын
Seems lot of ppl bothers that LOW POLY in the title so lets solve the mistery...first i agree that if something is called low poly it should be optimised with polygons in a sence that there is no single polygon extra and everything should align perfectly etc.. On the other hand do we have any chart that saying how many polygons is that? If yes pls do share. So let say its 1k and we solved category of low poly from 0 to 1k. And everything else is high poly? from 1k to a trilion? Does that makes any sence?
@finlay34277 ай бұрын
fuckin loop cuts, I keep reloading my KZbin tab instead of adding a loop to my model
@viptech34919 ай бұрын
Bro make Suzuki Ertiga
@lildanil23888 ай бұрын
Hello, can you explain me how to make the coordinate axes always visible please 🙏🏻
@sevengraycubes8 ай бұрын
which ones? on cursor when moving objects?
@sevengraycubes8 ай бұрын
if those ones select move tool from tool menu on left side :) and u will have axes visible :)
@lildanil23888 ай бұрын
no, am talk about how to make axis visible through blueprints(sry for bad english) @sevengraycubes
@sevengraycubes8 ай бұрын
@@lildanil2388 toggle x-ray mode
@lildanil23888 ай бұрын
upd: i found it its transparency
@hometutorial_887 ай бұрын
Sorry sir, can you make a tutorial on how to make rope
@sevengraycubes7 ай бұрын
there are at least 10 tutorials out there on that topic just google them..
@hometutorial_887 ай бұрын
@@sevengraycubes ok thanks
@solanki59858 ай бұрын
can you make atleast one high poly car (game ready, photorealistic, gta 6 level)😢
@sevengraycubes8 ай бұрын
maybe :)
@eziofawkes64958 ай бұрын
how can I get this textures, and add my library?
@sevengraycubes8 ай бұрын
kzbin.info/www/bejne/jWelh6WXodeYgJY this is how
@jakethedog59067 ай бұрын
coo
@sandilukwattaliyanage73767 ай бұрын
13:10 where can i find those reference images?
@sevengraycubes7 ай бұрын
google search
@zhongxina277 ай бұрын
2:45 i don't have the image tab option
@sevengraycubes7 ай бұрын
Image must be selected
@lmeier487 ай бұрын
I cant find the tire asset, some hint?
@sevengraycubes7 ай бұрын
simple cylinder 3 loop cuts for indents and ure fine with tire...will make tutorial about that soon...
@lmeier487 ай бұрын
@@sevengraycubes tks!! i will try that, and tks for the video, I was totally noob in blender, and with your instructions I just made mY 1st car and almost done!! 🙏
@RafaNabilFadhila8 ай бұрын
I make cars every day or always on simple planes but if I use a blender it's difficult to make them
@MOGHBMW7 ай бұрын
really to difficult to see and understand how you doing 😪
@sevengraycubes7 ай бұрын
will add a pointer in future videos maybe it will help...
@MOGHBMW7 ай бұрын
i hope thanks @@sevengraycubes
@nerd.coder_Abir4 ай бұрын
can anybody give me the blend file
@simizy3726HAPCNW01852 ай бұрын
was also asking me this, my body of the car isnt very good and i would love to have the base shape of the car from someone