Modeling of Electric Vehicles using MATLAB & Simulink - (Part-1)

[@vaibhavmehta100]

What package of Simulink are we using here ?

[@sakiulislam3952]

sir, my matlab model is 2020b, but it doesn't have any powertrain blockset....How can I model electric vehicle? please help me

[@Fuhrerjehova]

If you can''t find a specific item it is most likely because you lack some package. You will, other than the normal Simscape package, also need the driveline package, the powertrain blockset package and possibly the electrical package. All for Simscape.

[@kalpeshpagare6212]

What want to say dude?

[@Fuhrerjehova]

@@kalpeshpagare6212 I'm not sure what you want to tell me. The post is not an answer to the video itself, but rather the countless comments where posters wonders why they can't find a specific block used in the video.

[@sakiulislam3952]

sir, I am facing this problem...May, you tell me how to install the powertrain and drive related packages.

[@sakiulislam3952]

@@Fuhrerjehova sir, I am facing this problem...May, you tell me how to install the powertrain and drive related packages.

[@Fuhrerjehova]

@@sakiulislam3952 I am quite sure you can find information on how to install matlab packages online. If you are to use matlab, being able to find standard information on the internet is a minimum requirment

[@yadurnath]

What are the different toolboxes used in simulation?

[@yakem226]

when do you use magic wheel equation over simple weheel?

[@nicolasperezbaena4458]

Hi, I cannot define the motor or the h bridge in matlab 2017a. How could I do it?

[@lakshaykumarshringey4664]

Hi I replicated your model but I am facing some problems in running, it is saying SOLVER COULD NOT SOLVE THE SYSTEM OF ALGEBRAIC EQUATIONS BECAUSE A SINGLE ITERATION MATRIX WAS ENCOUNTERED. And there are many errors can you please help me?

[@SkLearnFun]

yes for me tooo

[@DonSETV]

What are the names of the libraries where I can find the tire, battery, driver and PV? I cant find them in my Simulink

[@salmaariche801]

simulink library

[@kundankumar-dt5uu]

Where is inveter in block? Is it same as power converter in block diagram initally in video

[@pulinpurohit2074]

Respected sir, are you from which country ???

[@AndyEsVa]

Hello @Skill Lync I'm trying to replicate this model, but my H-Bridge does not give me the "External" option, do you know why that could be?

[@cheerlaganesh7754]

Same problem i have also found could you please tell why it has happened?@skill Lync

[@anshulmehrotra5878]

@@cheerlaganesh7754 Same problem MATLAB 2019a please help ASAP

[@snehapanigrahi4073]

@@anshulmehrotra5878 u will find that in MATLAB 20

[@vineetkatke9583]

@@snehapanigrahi4073 what is matlab 20? if it is some other version of matlab, then how do we 2019a version users make an H bridge external?

[@snehapanigrahi4073]

@@vineetkatke9583 matlab 2020 version u need to update your matlab

[@Afferis]

pls do for hvac electric vehicle as well thanks

[@NeerajTonsalli]

what are all the packages oe extions i would need for this

[@jerinjoy5435]

sir thanks for the video can you please do a video on how to model EV with BLDC motor

[@brainydevTECH]

Thanks. Do you have a tutorial video on lightning arrester model? Please help!!!

[@dhirajdabi7523]

What is the H bridge and why we used the H bridge in this simulation ..what other we can use instead if H bridge ...

[@rcqwerty695]

Hi there, How do you have all the 'Tire' and 'Vehicle Body' blocks already in your simulink? I have searched mine and I do not have them. Thanks

[@axelgaxiola2774]

Hi, I found the tire in Matlab 2011

[@rohandoijode3468]

Is it a student version ?

[@rohandoijode3468]

@@axelgaxiola2774 Student version ?

[@axelgaxiola2774]

@@rohandoijode3468 yes

[@hadeer6461]

Thanks sir but l went to simulink for HVAC by simulink / matlab ..... please help me

[@nishankplayzzz]

can we use this method for bike

[@gokulvlsi]

Excellent

[@SandeepKumar-rr8bj]

Thank you for the video using this tutorial am create a model but finally scope and display speed and distance will be showing negative values pls help me in this issue

[@lodovicomanildo4718]

Did you solve it? the same happen to me.

[@rashmi7017]

Have u solved this

[@SandeepKumar-rr8bj]

@@rashmi7017 No

[@hamzafaiz3587]

@@SandeepKumar-rr8bj I'm having the same issue, I get only negative values, Had you find any solution ?

[@deeparthshah5575]

Thanks for your help dude, It really helped me alot.

[@anweshadas0701]

Hey. Can you share the model with me? Via email?

[@bikashdas1117]

Kya app automobile engineering paradi kor raha ho

[@hrishikeshbarve9338]

hey please can you help me can you send your model on email.i got on erroe of solver configutation blovk

[@Bunuuuuuu]

sir please help me how you get that vechile body i can't find it i tried 18/19/20 but i unable to find another sir also use this please sir reply to me

[@SkLearnFun]

sir at the time i am using H-bridge it is showing me solver configuration error , please help me

[@Kivhtas]

can we use PMSM instead of DC motor?

[@ABHILASHPAMBALA-k8j]

i dont find longitudinal driver in 2024a , it replaced by longitudinal vehicle. So how should i use it in the place of longitudinal driver?

[@nivethinim8079]

I'm also using 2024a but for me longitudinal driver is available. else in the MATLAB command window type ssc_new-->new simscape page will open their type longitudinal driver....probably you will find.

[@ishitakesarwani3940]

how will i do the modeling for dynamic wireless power transmission of electric vehicles using simulink

[@oupakekana1759]

on the battery side how can i replace it with supercap n fuel cel? Sir

[@mudassarsiddiqui4112]

Thanks for the video

[@BTETC203shrutipingale]

which sensors are used here?

[@debanjanbaidya9383]

Sir, can I pls get a link to download the ppt file?

[@akshay-qh9df]

What type of job after learning matlab?

[@RKSingh-ft6rp]

Sir can i know how to obtain simulink model of control frequency control of electric vehicle in microgrid

[@yasminaaissat3683]

i need a model withe a synchrone reluctance motor please

[@SantoshYadav-Bgm]

i have a problem to find out tire in matlab 2019b

[@eshwarsandireddy8489]

have you solved the issue?

[@furkanturan889]

@@eshwarsandireddy8489 nope, do you have any idea

[@Fuhrerjehova]

@@furkanturan889 You need the Driveline package. Mostly when you can't fin something like he does it is because you lack a package.

[@mishaltp3602]

which version of matlab is this?

[@ShubhamSingh-uq6ks]

sir Plz provide PPT of this video i really need PPT for my collage presentation

[@samson2433]

how do you connect a fuel cell to this model including energy management ?

[@amoghmangalam3130]

hi sir . pl give link to download matlab simulink .

[@nikhilkumar-oc7gd]

In results vehicle speed is a straight proportional graph controller is unable to match the reference

[@EducateRural]

can we get the ppt please sir

[@varunch105]

Please share the ppt boss..

[@engineeryuvraj6751]

EV ka koi short term courses hota h kya???

[@Vishwakarma.b]

I’m not able to find tyre, body etc in matlab 2016. How do i add them?

[@surajdhotre3546]

just search vehicle in the library u will find it

[@pranjalbajpai885]

spell it as "tire" not "tyre"....I did same mistake as well :)

[@abdelmalikmechri7836]

@@surajdhotre3546 Hello do you have simulation véhicule electrique matlab 2019

[@40avenged]

Where is part two?

[@shovadhungana5851]

please post the modelling of induction cooker in matlab

[@sandeshkhadka3054]

hello sir, can i get this SLX file of matlab simulation.

[@yaronav8591]

Can you please send me the simulink file that you used in this simulation?

[@theresearchers3129]

Please solve “ black body radiation “ using MATLAB

[@tanmaybhawalkar6471]

I am getting negative speed...please help me

[@anjalikola4225]

Sir, can I pls get a link to download the electric vehicle simulink file?

[@pushpaktayade6362]

can i get the file

[@StyleofSTAR]

i want to do my career in EV and i am electrical diploma holder

[@SkillLync]

Hi Omkar, please click here to learn more about our product offering: bit.ly/3FNJ4Gp. Please visit bit.ly/3lwNcRY to book a free live Demo. Post completion of your demo, our team will contact you to discuss our course packages & payment options.

[@PiyushNikam]

How the hell do you search for any items

[@RAUNIKAANANDBME]

Left click on the blank canvas.