Modified Hemingway Kit Die Holder

Gday, This is a kit sent in by a very generous viewer, the plans have been re-drawn with a few modifications to improve the tool, when I reach 20k subscribers i'll be giving away the original die holder I made in 2019, if you'd like a chance to win this please subscribe and i'll be announcing this soon after I reach 20k subscribers, Thanks very much for watching, Cheers Matty

[@TattooTaffy1]

kurtis definitely put us on a winner when he suggested following your content 👍

[@MattysWorkshop]

thanks very much mate, appreciate you watching, Cheers

[@ShedBuiltStuff]

A very small amount? A “poofteenth” of course !

[@MattysWorkshop]

Thats it mate

[@davidcahan]

When you no someone is sick (and likely hurting) but they appear calm and stoic, like they haven't a care in the world? That's called class

[@MattysWorkshop]

Much appreciated mate,

[@johnmoore1025]

Great job as usual, hope you don't feel to crook after the treatment. It's a cruel world when an absolute top guy as yourself get the dreaded human rust. I just hope that the treatment is successful sooner rather than later

[@MattysWorkshop]

Gday John, treatment went well but starting to feel the effects and the next few day will be ordinary id say, Im confident the chemo will do its job but only time will tell mate, Appreciate you watching and commenting, Cheers

[@josephlovell6951]

Matty still praying for you.. keep on fighting. Cair for you like a brother man.

[@MattysWorkshop]

Thanks mate, much appreciated

[@chrisarmstrong8198]

The unplanned decorative machining at 29:08 should go viral on machining channels to show the effects of unbalanced vise loading. We can all learn from this. At least the tool didn't break !

[@MattysWorkshop]

Gday, this was a perfect example, hopefully many will benefit from it mate, cheers

[@wirenut003]

I like the threader you just made because it really keeps your hands and fingers out of harms way when it is threading your work piece. Rest up Matty, don't over do it you have to recharge your body after a treatment. I know because my best friend is going through it with brain cancer, and I take him to all his treatments, some days it is good after the treatment , we even go to dinner in a steak house. so Cheers always

[@MattysWorkshop]

Gday, this design really has a lot of advantages I think, appreciate you watching and commenting, cheers

[@joedowling5452]

Hi Matty. This is a great little build. You make it look easy. Hope your treatment went well and your not feling too off. You called yourself lazy but i highly doubt that is the case. You're doing stuff and mzking these videos for us to sit on our backsides and enjoy. Get your legs under you and dont rush. We'll be here.

[@MattysWorkshop]

Gday, This was a great build and really good practice in tight tolerances, I do get lazy trust me but I really enjoy making the content and hopefully encouraging others to have a go at making things they normally wouldn't, Appreciate you watching and commenting mate, Cheers

[@dannygreene4594]

Great work mate a tool of beauty....looks like a fun build

[@MattysWorkshop]

Gday, this was a really enjoyable build and good practice on tight tolerances, thanks for watching, cheers

[@dannygreene4594]

Appreciated mate, go well with the next round of chemo

[@garyc5483]

Great job Matty. Dont do too much if you feel like crap. We are here for you. ATB regards from the UK

[@MattysWorkshop]

Thanks very much Gary, Ive slowed down a bit but still staying motivated, Thanks for watching mate, Cheers

[@mikebarton3218]

There’s a dearth of good content from my (extensive) list of subscriptions on Thursday mornings (UK time) so thank you so much for what you do. Wishing you a full and speedy recovery Marty. Mike

[@MattysWorkshop]

Thanks very much mate, Appreciate you watching and commenting...

[@tobiashahne8675]

Great build. Very smart little bit of kit to have! All the best with the second round of chemo mate, hopefully the recovery will go well!

[@MattysWorkshop]

Gday, This was a great build to do and really good practice in tight tolerances, Treatment wen well but id say the next few days will be a bit ordinary, Appreciate you watching mate, Cheers

[@johnmoore1025]

For anyone interested it is really worthwhile watching his previous videos they are all top notch

[@MattysWorkshop]

Thanks very much mate

[@nortiousmaximus940]

young man, you got this, we'll all be waiting, your health must come first. and the die holder, it came out awesome, very well made, nice work. keep it up.

[@MattysWorkshop]

Thanks very much mate, appreciate you watching and commenting, cheers

[@boblow2186]

That’s a really neat die holder. And a great job on the making of it. Very nice job. You take it easy with the treatment and we will see you when you feel like it no pressure. We are glad to give you some support 👍👍

[@MattysWorkshop]

Gday, We cannot thank everyone enough for the support we have received, the KZbin community is amazing mate, Thanks very much for watching and commenting, Cheers

[@bostedtap8399]

Good to see you busy, take it easy when you need, or have too 😉. Another great build Matty. Thanks for sharing.

[@MattysWorkshop]

Gday, Ive slowed done a bit but still staying motivated, Im hoping to keep the weekly videos coming mate, Thanks for watching, Cheers

[@geoffrobinson5584]

Thanks Matty. Hope the chemo is bearable and you feel better as the treatment progresses. Another excellent build!

[@MattysWorkshop]

Gday, the treatments are knocking me around a bit but it’s got to be done mate, appreciate you watching, cheers

[@jonsworkshop]

You made a stunning job of that Matty! Keep rolling with the punches buddy, hope round 2 is not too rough. Cheers, Jon

[@MattysWorkshop]

Gday Jon, im starting to feel a bit shit but I’ll be right mate, that’s a small price to pay, really appreciate you watching and commenting mate, cheers

[@RB-yq7qv]

Hi Matty. All the best for the treatment. The die holder looks and performed very well. Have a great week.

[@MattysWorkshop]

Gday, Treatment went pretty good but id say for the next few days l won't be feeling the best, Appreciate you watching and commenting mate, Cheers

[@markwatters6875]

Another great build and top tool there mate. Thanks for your time and the video Matty. Have a good one 👍🇦🇺

[@MattysWorkshop]

Gday Mark, this was a really good build and really good practice in tight tolerances, thanks for watching mate, cheers

[@improviseddiy]

Superb surface finish Matty! Glad to see that you are still in high spirit.

[@MattysWorkshop]

Thanks very much mate, appreciate you watching, cheers

[@ronwilken5219]

Hang in there Matty, hopefully the future chemo sessions don't hit too hard. Great to see you back in the shop for what looks like a very useful addition to the shop made tools. Regards from Canada's banana belt.🤞🇨🇦🍌🥋🇺🇦🕊️🇦🇺🐨👍

[@MattysWorkshop]

Gday, chemo is knocking me around a bit bit that’s life mate, the reward at the end is worthwhile, appreciate you watching, cheers

[@joewhitney4097]

Great project and a really nice job on building it Matty. Thanks for sharing.

[@MattysWorkshop]

Thanks very much mate, I really enjoyed this build, cheers

[@rjung_ch]

Matty, this video shows you are at 20K plus. Great work on your side, always a huge pleasure. Thank you 👍💪✌

[@toddhazell925]

G'day Matt. I hope all went well with today's treatment. A fantastic build of this kit. Top job mate 👍👍👍

[@MattysWorkshop]

Gday, Today went well overall, about 6 1/2hr in the chair this time, Thanks for watching mate, Cheers

[@jesseburns9734]

God Bless you and your Family We will keep you in our Prayers.

[@MattysWorkshop]

Thanks very much

[@theoldstationhand]

Your quite the metal guru - nice job with the threading it does spin good. Good prang, I usually bust the tool as well! All the best Matty

[@MattysWorkshop]

Gday, I was pretty cranky when it all went wrong but somehow the cutter survived, Thanks for watching mate, Cheers

[@chrisbaker3844]

Hi Matty Great to see you doing well, hope the next treatment is easier than the last. As far as the die holder goes, jobs a good ‘un. Always like your videos, no time wasting repeating yourself, just good honest machining, warts and all.

[@MattysWorkshop]

Gday, thanks very much for your positive feedback, the treatment is knocking me around a but that’s to be expected, appreciate you watching mate, cheers

[@kentuckytrapper780]

Excellent job Matty, nice looking kit...best wishes my friend..

[@MattysWorkshop]

Thanks very much mate, appreciate you watching as always, cheers

[@alc818]

Another nice build! Thanks for filming it! Take it easy during your treatments and I'm wishing the best for you!!

[@MattysWorkshop]

Thanks very much mate and really appreciate you watching and commenting, Cheers

[@Billbo-kz9fd]

Bloody fine engineering skills Matty. I'm rooting for ya mate. Take your time and if you feel a bit crook, lay off a bit, we can wait and if you didn't have a cock-up now and then you wouldn't be human. All the best.

[@MattysWorkshop]

Gday, thanks very much, a little cock up now and then happens mate, appreciate you watching and commenting, cheers

[@alasdairhamilton1574]

Beautiful work, hope round two goes well and you don’t feel too💩. 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@MattysWorkshop]

Thanks mate, round 2 went ok but feeling it now, cheers

[@ricberek]

You deserve all the support you are getting Matty. And then some.. Great build showing your skills and honesty, so thanks again.

[@MattysWorkshop]

Thanks very much, the support has been amazing mate, cheers

[@acmemachining]

Nice job Matty. You will hit 20K with no problem. Take care of yourself.

[@MattysWorkshop]

Thanks very much mate, appreciate you watching, cheers

[@militaryvehiclemarkings4696]

Hi Matty That was a neat little build. I am intrigued by the clutch mechanism. Looking forward to the next build. I hope everything went well with the treatment.

[@MattysWorkshop]

Gday, The clutch works surprisingly well and it locks up solid, way better then I was expecting, Appreciate you watching and commenting, Cheers

[@barrycaudle9926]

Good to see you in the shop doing what you enjoy.

[@MattysWorkshop]

Thanks mate, Best place to stay active, Cheers

[@bearsrodshop7067]

Absolutely made my morning Matty. The filming to the finish part was more than first class. I am so glade to see one of us felling better, cause the MaPom they are pumping in my vains really suck. Thinking of you after, and Keep on Let us all know how you are progressing. I am on my third round of chemo this coming Monday. Number 2 blow my doors off. Not sure if I will make all 6, but going to give it Hell! Bear

[@MattysWorkshop]

Gday Bear, second round went ok but feeling it now, we just have to keep on going mate, stay strong 💪🏻

[@MatthewTinker-au-pont-blanc]

Thinking about you with your chimo..... All the best Matthew

[@MattysWorkshop]

Thanks very much mate, Truly appreciated

[@Darren777Au]

began watching last night but ended up finishing today, thanks for keeping us updated with your health, Matty, keep going strong. Enjoy watching your experience and builds, much appreciated.

[@MattysWorkshop]

Gday, appreciate you watching and commenting mate, cheers

[@wktodd]

Clever design. Nicely made, as usual. Good work Matty

[@MattysWorkshop]

Gday, It really is a great design, simple and it works, Thanks for watching, Cheers

[@Crusher9mil]

Another quality, educational and entertaining build 👍🏻. Our prayers are with you Math from the US 🙏🏻

[@MattysWorkshop]

Thanks very much mate, appreciate you watching and commenting, cheers

[@wrstew1272]

20.3K. Three days later! Congratulations Matty! Hopefully you are doing well, looking forward to seeing more of your work, always a treat.

[@MattysWorkshop]

Gday, hard to believe the channel has grown this big, thanks for watching, cheers

[@samrodian919]

That was a beautiful job Matty. You certainly can call yourself a machinist of the highest calibre! ( true machinists are allowed only one fuck up per job so you're on the money mate!) Your finishes are bloody awesome ! Good luck for your next treatment my friend. And don't rush back out to the workshop if it knocks you about a bit. We can wait! Cheers from England, Sam

[@MattysWorkshop]

Gday, Im still only a hobbyist thats self taught mate, I got luck on this build with only the one fuck up thankfully, Thanks for watching mate, Cheers

[@samrodian919]

@@MattysWorkshop self taught or not mate, you'd shame some so called professional "machinists" all day every day!

[@Watchyn_Yarwood]

My thoughts exactly! I was about to post a comment on his finishes but thought I should take a look and see if someone has beat me to the punch. His finishes are incredible! And most importantly he needs to take care of himself.

[@ryebis]

Nicely done Matty, the die holder looks great!

[@MattysWorkshop]

Thanks mate, appreciate you watching

[@CraigLYoung]

Dang, I would actually go for your die holder except I already have the Hemingway one. Thanks for sharing 👍

[@MattysWorkshop]

Gday, still go for it mate, you can never have too many tools, appreciate you watching as always, cheers

[@ralphpavero7760]

Dam that's nice great job Matty I'm going to order one glad to see your doing well

[@MattysWorkshop]

Gday, this is a really enjoyable build and a good practice in tight tolerances, appreciate you watching mate, cheers

[@jsweizston5410]

Subscribed, god bless you and I'm with you on your fight with cancer. God bless from the USA!!

[@nobbysworkshop]

Superb work on the die holder Matty. You made a wonderful job of it. Hope you recover the next treatment quickly. All the best. Cheers Nobby

[@MattysWorkshop]

Gday Nobby, I’m slowly coming good from the last chemo mate, just takes time, cheers

[@johnlee8231]

Seems like a nice bit of tooling to have. Enjoyed watching it. Hope you bounce back from this round quickly.

[@MattysWorkshop]

Gday, This was a really enjoyable build and the tool works quite well, Thanks for watching mate, Cheers

[@Tinman97301]

An amazing tool👍

[@MattysWorkshop]

Thanks mate

[@Rustinox]

That's going to be a very nice gift. Good idea to make something yourself. Hope you're doing OK with the chemo treatment.

[@MattysWorkshop]

Gday, Handmade tools are much better then buying something to giveaway, Treatment went pretty good but starting to feel it now, I think the next few days I won't be doing much at all mate, Thanks for watching, Cheers

[@Booker58]

Hi Matty, outstanding work buddy. Keep up the good work.I hope everything goes well with your treatment, Hang in there buddy. Stand strong. Your going to beat it..

[@MattysWorkshop]

Gday, the chemo has knocked me around a bit this time but that’s to be expected, cheers

[@sky173]

CEE sent me. I'm already a subscriber, but I'm just hearing the news. Much love from MI, US.

[@mmazz30]

Goodluck with your chemo Matty. I jumped on board when CEEA mentioned you and have enjoyed this channel.

[@joelbrown3479]

Me too front nyc

[@MattysWorkshop]

Gday, thanks very much and great to hear your enjoying the content, appreciate you watching mate, cheers

[@joelbrown3479]

Hang in there brother, you bring great joy to your fans!!!!

[@MattysWorkshop]

Thanks mate, I’ll keep putting out weekly videos for as long as I can, cheers

[@MyMiniHomeWorkshop]

Another beautifully made piece of kit Matty, you should be proud. I have just started making a new button die holder myself, but my little homemade lathe would struggle to hold the tolerances needed to make something like that. I hope the Chemo doesn't knock you around too much, I watched my dear old dad go through it 25+ years ago, but I'm kind of assuming they have managed to refine that gunk a bit since then. 👍

[@MattysWorkshop]

Gday, This was a great build and good practice in tight tolerances, Im have the treatment call RCHOP which I believe has been the same for many many years, Thanks for watching mate, Cheers

[@MyMiniHomeWorkshop]

@@MattysWorkshop I really don't know what dear old dad had, but he was in Japan in the Peace Corps, based in Hiroshima 6 months after they nuked the joint, and he spent 6 months driving around through there in an open jeep. The cancer he had was some rare thing, according to his oncologist, he had never ever seen in an adult, only small children. Hang in there 👍

[@GoCreatehms]

That's a great tool, I really like it. Beautiful job.

[@MattysWorkshop]

Thanks very nice Nigel, I hope you’ve all been well mate, take care, cheers

[@StanMourning]

That is an awesome die holder, and I enjoy watching you work with the commentary. We are praying for you and the family.

[@MattysWorkshop]

Thanks very much mate, cheers

[@howder1951]

Great tool, great video Matty and a great give-away, congratulations on the sub count, well done friend, cheers!

[@MattysWorkshop]

Thanks very much mate, cheers

[@Warped65er]

Very nice build.

[@MattysWorkshop]

Thanks mate

[@Michael_CS615]

I see elsewhere you say "I got luck on this build with only the one fuck up thankfully," ..... I think on this one you can blame the tools and we will not complain! Though it was probably an imperfection in the metal...... Meanwhile - good luck on round 3.

[@MattysWorkshop]

Gday, it was probably my fault too for not checking how tight the vice was. Good lesson learnt, thanks for watching, cheers

[@Mr.Avuncular]

GOOD morning from Oregon Matty hope your doing well!! Got me coffee and stayed upto catch your video.. CHEERS!!🙏👍 Works quite nicely mate!!

[@MattysWorkshop]

Gday, I hope you enjoy the video mate and your coffee, cheers

[@hdfanboy]

I don't know if I would ever use a tool like this but the quality of the kit really makes me consider buying them to have fun machining them in some spare time. Another great shop tool build Matty.

[@MattysWorkshop]

Gday, this was a really good build and good practice in tight tolerances, appreciate you watching, cheers

[@624Dudley]

Thanks Matty, that was informative 👍. I had wondered how that cone clutch worked, now it’s quite clear. Good video editing, too! Feel better fast.

[@MattysWorkshop]

Gday, thanks for the positive feedback mate, appreciate you watching and commenting, cheers

[@paulcooper2897]

That's a pretty cool die holder ... and incredible workmanship on your part! I'm guessing the handle really only needs to be strong enough to engage the clutches. Thanks for sharing 🇨🇦

[@MattysWorkshop]

Gday, this was a great build and good practice in tight tolerances, the clutch locks up quite easily, thanks for watching, cheers

[@scottkrise1867]

Get well. I hope your treatment goes well

[@MattysWorkshop]

Thanks very much, cheers

[@dougmclaren4328]

Another great vid Matty, thoroughly enjoyed it. Best wishes for your next round of treatment.

[@MattysWorkshop]

Thanks very much mate, appreciate you watching, cheers

[@bclare2544]

Nice work on that one Matty.

[@MattysWorkshop]

Thanks very much mate, Cheers

[@alfadoofus]

It's good to see you making things , I'd guess you'd say "what else would I be doing " Good luck on the treatment.

[@MattysWorkshop]

Your spot on there mate, what else would I be doing, treatment went well but the next few days are going to be ordinary id say, Thanks for watching, Cheers

[@alfadoofus]

@@MattysWorkshop I'm 60 and had scare last year it turned out not to be cancer but there were a couple other issues I'm dealing with it had a check up and things are getting better . Take care . If you feel crappy after treatment I won't fault you for taking a day off

[@MattysWorkshop]

@@alfadoofus truly appreciate your support mate, thank you

[@devster52]

You really are doing some great work. Kind of amazing given your circumstances. Hang in there!

[@gordonfitzsimmons2018]

Hi Matty. Another very good video. Hope you are felling ok after your treatment. Cheers

[@MattysWorkshop]

Gday, Feeling ok so far after today but i'd say tomorrow might be a bit different, Appreciate you watching mate, Cheers

[@ThePottingShedWorkshop]

Very nice build! Looks like it works really well. A lot more complicate than a short handle you just let go of at a shoulder, but really nice to see how it works. Good luck with the chemo. Hope it works well for you and you dont feel too crap!

[@MattysWorkshop]

Gday Robert, this is a great build and really good practice working to tight tolerances, appreciate you watching and commenting mate, cheers

[@kennethschultz6465]

hi from Denmark .. and the Curtis famely dog bird´s wife

[@MattysWorkshop]

Gday, thanks for stopping by, cheers

[@thehobbymachinistnz]

Hi Matty I hope the treatment has gone well and not knocked you back too much. My very first KZbin video was a die holder. At that time I could not understand how I had worked so long without a die holder. But the issue I have with my one is that I use it manually, without power from the lathe. I'm too scared to make threads with it under power. Now your die holder with the clutch is exactly what I need to cut threads under power. If something goes wrong then you can just release the handle and everything spins. Thanks for the video, I'm going to add this to my list of builds.

[@MattysWorkshop]

Gday, This design is really good but you do need to put quite a bit of pressure on the handle when doing larger threads, just keep I=this in mind when you build one mate, Cheers

[@davidgraham4112]

Great job! I wish I could do as good a job as you do! I hope your treatment goes well for you!

[@MattysWorkshop]

Gday l, you to can do the same mate, treatment went ok but feeling it now, appreciate you watching, cheers

[@willemvantsant5105]

Nice bit of kit Matty. Nicely made and i assume the clutch faces must remain oil free to avoid slippage.

[@MattysWorkshop]

Gday, the clutch cones are ran dry and need to be a super smooth polished surface to prevent galling, appreciate you watching mate, cheers

[@HM-Projects]

I've been thinking about making this, might try following you along. Hope the treatment's going to plan, glad you're in the shop keeping busy. Take care mate.

[@MattysWorkshop]

Gday, This is a great build and good practice working to tight tolerances, Appreciate you watching mate, Cheers

[@bellapop565]

Looking good, Matty. Sending chooch from the states.

[@MattysWorkshop]

Thanks mate, cheers

[@jamesworsham125]

Very well done and the finish turned out awesome! Not sure if you follow CEE, but I really enjoy watching both you guys. 😉

[@joelbrown3479]

Matty had gifted an oil container (of exceptional quality build) a while back to Kurtis of CEE... That's my connection to Matty also. GREAT CRAFTSMEN

[@MattysWorkshop]

Gday, certainly do follow CEE mate, appreciate you watching, cheers

[@rjung_ch]

@@joelbrown3479 The same happened with me, came over from CEE for a glance and stayed and watched the adventure ever since!

[@goboyz8016]

Great job as always. Prayers to you Matty. You are fortunate to be living in this generation buddy as they have wonderful treatments now days so keep your spirits up and fight the good fight my friend as I am sure you will come through it.

[@MattysWorkshop]

Thank you

[@MyLilMule]

Pretty nice design. Well executed build (minus the oops). Keeping you in my thought and prayers, Matty.

[@MattysWorkshop]

Thanks very much Greg, appreciate you watching mate, cheers

[@graedonmunro1793]

G'day Matt great from start to finish!! i did'nt notice any fuck up, only quality workmanship!!👍👍👍

[@MattysWorkshop]

Gday Graedon, I definitely noticed that fuck up mate🤣, thanks for watching, cheers

[@mattomon1045]

Matty get well soon

[@MattysWorkshop]

Thanks mate

[@malsm8892]

Good luck with the treatment stay safe

[@MattysWorkshop]

Thanks mate, cheers

[@malliz1]

Great job mate nice to see you working😂

[@MattysWorkshop]

Thanks mate, Im still pok'in along slowly, Cheers

[@billmacfarlane4083]

You're a bloody master! Just a question on forming the male cones. Did you just machine down to a similar "point" by eyeballing it to get them consistant? Because that looks a pretty difficult edge/point to measure accurately. Again, a masterful job! All the best with the rust removal. If you're having teament in Canberra, remember; I'm here - ready, willing and able to provide any support that I can.

[@MattysWorkshop]

Gday Bill, what I did to get the cones to be as close as possible was to machine them so the flat on the small end looked the same, there hard to measure but very close, it’s probably not the correct way to do it but it works, im getting treatment in Bega but I’ll definitely keep you in mind if I end up in Canberra again, cheers mate

[@Midlife-Adventures]

I hope the chemo went as well as possible for you. I can see one of those kits in future. It would help if I got better at single point threading though.

[@MattysWorkshop]

Gday, Chemo went well but starting to feel the effects, this is a really good build and cutting the threads isn't that hard mate, if I can do it you can, Appreciate you watching mate, Cheers

[@Steviegtr52]

Hi Matty. You are going through what i have been through & it is not nice. But what i will say is you are handling it better than I did. I locked myself away & that was the wrong thing to do. Chin up fella. Steve.

[@MattysWorkshop]

Gday Steve, it’s definitely not an easy thing to go through but it has to be done mate, cheers

[@ianmoone2359]

Another great video thanks Matty. I must be a dummy, I couldn’t figure out how it actually works, with the cone clutch and the handle thing. But the build you did was great.

[@MattysWorkshop]

Gday Ian, the cones just lock up with friction when you push or pull on the handle, this is why the cone features have to be a super smooth finish to prevent galling, thanks for watching mate, Cheers

[@ianmoone2359]

@@MattysWorkshop Thanks Matty, now it makes sense, thanks for the heads up. It turned out really well. 👍

[@joelbrown3479]

Thanks for ANOTHER GREAT BUILD... TOOL MAKING AT IT'S BEST 👏👏👏👏👏 Sorry Matty, just a fan of great craftsmanship. Stay STRONG BUDDY from da Bronx jb

[@joelbrown3479]

"CELUBRIS" fit, PRICELESS 😎😎😎😎😎😎😎😎

[@MattysWorkshop]

Thanks mate, really appreciate all your support, cheers

[@guye7763]

Good work Matty, Remember with the chemotherapy you will lose your fingerprints, weird I know but worse is you lose the grip on your feet. Be very careful in the shower so as not to go arse up. Good luck and Cheers.

[@MattysWorkshop]

Gday, the chemo does some crazy shit to the body that’s for sure, thanks for watching, cheers

[@RalfyCustoms]

Far out Matty, g'day mate, good luck with the treatment, great chatting the other day by the way, nice to see you swear as much as me in real life too lol, keep at it my friend, you're a star

[@MattysWorkshop]

Gday Ralfy, I throughly enjoyed chatt'in the other day and yep I do swear a bit, thats makes editing interesting sometimes to🤣, treatment went well today but I dare say the next days are going to be shit, Appreciate you watching mate, Cheers

[@PhotoArtBrussels]

Hi Matty, popping over from the Cutting Edge Engineering Australia channel with Kurtis. Wishing you well and may you health improve. Greetings from Belgium.

[@MattysWorkshop]

Thanks very much mate, truly appreciate you watching and commenting, cheers

[@hilltopmachineworks2131]

Nice job my brother from down under. Hope the chemo treatment went as well as can be expected.

[@MattysWorkshop]

Thanks very much Tom, im going alright so far mate, Cheers

[@billdoodson4232]

Greetings from the UK Matty. I had just finished my coffee and was about to get up, (nice being retired) , but I'll get myself another coffee.

[@MattysWorkshop]

Gday, retirement has it benefits, hope you enjoy the video and coffee mate, cheers

[@malliz1]

​@MattysWorkshop yep the hours are great but the money is crap

[@RobertBrown-lf8yq]

Hey Matty 👋🏼 Very noice ( as we say in Western Sinney) 👍 Good luck with the treatments…. we’re all with you 1000 % 👍 Keep Punchin’ mate… Robert

[@MattysWorkshop]

Thanks very much, one foot in front of the other mate, cheers

[@seansysig]

Matty nice bit of kit!

[@frank64409]

I love your work Matty.

[@MattysWorkshop]

Thanks very much Frank, cheers

[@KarateSensei71]

I found you through Kurtis at CCE, wishing you the best Matty! Great videos.

[@MattysWorkshop]

Thanks very much mate, Cheers

[@stanb5685]

Hi Marty, I hope you’re doing better after your procedure. I just bought those Hemingway plans for the tail stock die holder the shipping was jest as much as the plans and stock in the United States, but after watching you make yours I thought I would give it a try. Take care my frend.

[@MattysWorkshop]

Gday, Im in remission now thankfully, the tailstock die holder is a pretty good build, Im possibly going to do an upgrade to mine at some stage, I just have to work out the fine details, Thanks for watching, Cheers