DO AT YOUR OWN RISK How I modified my 24V Kobalt item 3488480 Weed Eater to a Shakespeare UGLY HEAD trimmer head.
Пікірлер: 145
@dabb642 жыл бұрын
Wow - thanks for this video! It's exactly what I was looking for. Constant hand pain makes changing the bump spool difficult, plus this trim head is more functional than the original one. Works great!
@starastronomer2 жыл бұрын
Joseph Corporon Thank you, I appreciate that! I am very happy with the modification. Happy trimming :)
@ryanbarnes2570 Жыл бұрын
How did you get the nut off?
@cstorres824314 күн бұрын
Thank you for this video. What I did was cut a circle out of the plastic lid of a coffee can, poke a hole in the center for the shaft and mounted that under the washer then proceeded with the rest of the assembly. It blocks anything going into the gears. Works perfectly.
@starastronomer14 күн бұрын
👌👌👌
@barrylafleur62203 жыл бұрын
Thanks for putting this up. My bump feeder stopped working today. Watched this, bought the ugly trimmer and installed it without having to rewatch the video. Works like a charm. No more paying 15 dollars per spool....
@starastronomer3 жыл бұрын
You're welcome Barry LaFleur.
@geotrick Жыл бұрын
I got a Echo Speed Feed 400 to work on my 24-volt Kobalt. I used the black insert and the original nut to attach it. I have been using mine for 2 seasons now. Thanks for the video!
@starastronomer Жыл бұрын
You're welcome geotrick.
@DAT-TEXAS-DUDE6 ай бұрын
@geotrick Is the 24-volt kobalt a brushless motor?
@geotrick4 ай бұрын
@@DAT-TEXAS-DUDE yes
@holliswilkes9551 Жыл бұрын
Worked for my Kobalt 24v 12" trimmer (Model #KST 2224B-03). I purchased an inexpensive set of 4 black 4" silicone coasters to put 1 between the trimmer head and the original black metal ring to add protection to the motor parts. Punched a small screwdriver hole in the coaster and pushed it down onto the black ring. The silicone will keep it tight on the motor bolt as long as you don't make the hole too large. Other variations of part positioning failed and some kept the motor from spinning. Following the information for the stacking order (plus putting the coaster on before the new trimmer head) worked great. The accessory attachment model 15" (designed like it 'could' adapt more easily to attach after marker trimmer heads) version is 15lbs. This model is 5lbs. My light weight trimmer has been given new life and function. Thanks for posting the video.
@starastronomer Жыл бұрын
@holliswilkes9551 Thanks for your input.
@StephenInoue8 ай бұрын
Your video saved me from tossing out the Kobalt 24 volt string trimmer for a different brand one that took universal heads. Loved how you walked us thru using the included special bolts to retrofit a 24v big head with the Shakespeare Ugly Head 2 in 1 universal trimmer head. THANK YOU
@starastronomer8 ай бұрын
Appreciate the kind words, you're welcome!
@ragfolder Жыл бұрын
Thank you so very much kind sir! This is perhaps the most thorough as well as useful video I've ever watched on KZbin! And at 57, I've watched thousands upon thousands. I can't adequately express my appreciation, so I'm leaving you a ❤
@starastronomer Жыл бұрын
Much APPRECIATED! You're welcome ragfolder.
@eknight10124 күн бұрын
I have the 40volt but i think that the head is the same. That original head is a pain in the ass, so I thank you for this info.
@starastronomer24 күн бұрын
You're welcome 👌
@francinajohnson57162 жыл бұрын
Thank you for posting this and being so detailed. I was going to return my trimmer and purchase a different model since the auto feed doesn't work for me but instead I will just try this first.
@starastronomer2 жыл бұрын
So glad I was help to you Francina Johnson.
@micahclayton1399 Жыл бұрын
You just made my life a lot better! Thanks for posting. Works great!
@starastronomer Жыл бұрын
SO GLAD I WAS OF HELP Micah!!! You're welcome.
@robertartigue554111 ай бұрын
You are a life saver for this, cant wait to get one, that bump system is a pain in the ass!
@starastronomer11 ай бұрын
You're welcome!!!
@ismaellopez7429 Жыл бұрын
It works great!! Did it on mine thank you :) i bought my ugly head trimmer head at Lowes
@starastronomer Жыл бұрын
You are welcome Ismael.
@ryanbarnes2570 Жыл бұрын
Is this the 17.98 one?
@hansonromero49129 ай бұрын
Got mine for 25 dls lightly used and is a beast…I already have kobalt tools so have plenty of batteries including an 8 ah one and it last for over an hour.
@starastronomer9 ай бұрын
Great deal❗️
@cliffordallen4112 жыл бұрын
Great video and explanation!!! I have the 40v and this video worked for that model as well. Thank you!
@starastronomer2 жыл бұрын
You're welcome. Glad to see it worked with the 40v.
@tetramom3900 Жыл бұрын
I have a 40 volt. Were you able to use one of the provided hex nuts??
@moniquewilsonwilson2355 Жыл бұрын
Thank you I'm putting a Shakespeare head on and needed to see how to get the bolt off. Thank you.
@starastronomer Жыл бұрын
You're welcome @moniquewilsonwilson2355
@drs2q Жыл бұрын
❤wow amazing..you are helping so many people like myself. .kudos
@starastronomer Жыл бұрын
Thank you so much for those kind words!!!
@macmcintosh9158 Жыл бұрын
This video was super on point today...I have been looking to dump a bump feed since I bought mine...Install was exactly as detailed...One footnote- If you run .095 line or wire all the time I am sure you will have motor heat overload with pauses in your work...Mine did that with just two work lines of 105 line...So when I installed today i used .80 line and I still got it to overheat pause when working it hard...think about it bcuz your spinning 6 lines instead of 2...FYI MAC
@Mixwell1983 Жыл бұрын
I like the Shakespeare push and load head and love it. Installed it easily on my gas trimmer and recently got this Kobalt so got another head for it Installs the same way as the one you had and was quick and simple. I'm ready to go for Spring.
@starastronomer Жыл бұрын
Thanks Mixwell1983.
@nancymanner5728 Жыл бұрын
I can’t get the nut to budge even with the new metric tool. How in the world did you get it off? The head keeps spinning and I can’t get a grip on it?
@adamrichmond4953 ай бұрын
Use a impact tool
@tetramom3900 Жыл бұрын
Thank you. For the 40v, none of the nuts worked for me. You will need to get a M10 -1.25 JIS nut so that it fits the thread AND down into the brush head . . . 😅 something I didn't want to learn about but nonetheless, it fits perfectly. I have extras since I had to buy a box of 'em online. Couldn't find the JIS nut in hardware or auto stores.
@starastronomer Жыл бұрын
Tetra Mom You're welcome and thanks for your information on the 40v trimmer!
@linsan4362 Жыл бұрын
Does 80V use the same M10 -1.25 JIS nut?
@jonbarnard2017 Жыл бұрын
Just to confirm, is that the last of the 3 nuts? I.E., the one that screws on? The other two spacer nuts are still included?
@timlemasters37133 жыл бұрын
I burned up two trimmers doing this one was an 80v the other was a 40v. These heads are made for gas trimmers
@starastronomer3 жыл бұрын
Tim Was the trimmer head put on concentric to the shaft? If not it will put undo forces on the trimmer and vibrate. I've had no issues. Runs smooth as silk.
@Imisis2174 Жыл бұрын
You saved me from buying another trimmer Ty
@starastronomer Жыл бұрын
You're welcome Sandra.
@phyclark50203 жыл бұрын
Awesome, I'll be giving this an attempt this weekend
@starastronomer3 жыл бұрын
Phy Clark Cool...
@phyclark50203 жыл бұрын
I decided to do this sooner, love the difference in cut. I do notice the change in battery life and it's shorter, but overall happy with the change! Thanks for the video!
@starastronomer3 жыл бұрын
Thanks for the update. Glad you're happy with it.
@chadwickcooks Жыл бұрын
Nice video thanks for the help
@starastronomer Жыл бұрын
Thanks Chadwick Cooks. Was using mine this morning.
@lisademayo8589 Жыл бұрын
oh this is great. i had just one more question though if you don't mind? as far as the original "bump" head before you modified it, does the trimmer have to be RUNNING for the bump to work and feed more string? or can it also be done if i "bump" it when it's off to see the line length to where i want it?
@robertartigue554111 ай бұрын
Followed instructions to the T, no vibration, on there right in the middle, when I use Blades its fine and will blast through anything, but when i use the lines instead of blades, it just keeps shutting down as soon as it touches the grass... will run with lines just holding cutting end in the air, but as soon as it touches grass it shuts down 😞
@robertartigue554111 ай бұрын
Update: I figured out why it is shutting down to an extent... so I had took the guard off and just used the supplied yellow lines on Trimmer, kept shutting down. Though maybe there is a safety shut off with guard off. And then I remembered you trimmed your lines under 10 inches... once I put the blue guard back on and shortened the lines to 9ish inches, works like a charm... wonder if the added weight of the longer lines is making motor spin too fast or slow... works now tho thanks!
@starastronomer11 ай бұрын
You're welcome!
@wirelessguyny3787 Жыл бұрын
How have you guys loosened that reverse nut attached to the motor? My original locking nut is on there something fierce and I don't have any leverage to try and twist it off. I even opened the rear panel to the motor flywheel but there really is no good place to clamp onto to hold everything still while trying to back off that nut.
@beverlyrolon21862 жыл бұрын
I replaced the head on my kobalt 24v and unfortunately this did not work. I’m 63 and work my 1/2 acre on my own and I thought this would be my answer to making the yard work easier. At first the weeder would work for a few seconds and then die. Once the line got shorter it did great but it got hot and then went back to working for a few seconds and then nothing. I just removed the battery and I’m letting cool but I’m replacing the original head here soon. Like he said do it at your risk and good luck. The video was pretty easy to follow and it would have great if it worked for me.
@starastronomer2 жыл бұрын
Sorry to hear about that. I've had no issues.
@starastronomer2 жыл бұрын
Is the head concentric with the shaft and you aren't getting any vibration?
@beverlyrolon21862 жыл бұрын
Oh thanks for responding. Wasn’t expecting it. It had a little movement like you said and after I ran it a little bit it tightened. I see or feel no movement or shift.
@starastronomer2 жыл бұрын
Beverly Rolon If the "head" unit isn't concentric with the shaft axis you will get vibrations and that will put undo stress on the motor and cause an overheat condition on these "electronically" controlled tools today and it will stop to cause any damage which is a good thing. Hope you have it working now.
@carlthornton30763 ай бұрын
2nd Watch, Very Good!... #142 {5-1-2024}
@starastronomer3 ай бұрын
Thank you so much❗️Much appreciated 👌
@CTG802 жыл бұрын
I just did this to my trimmer, and I left the cooling disc on. I noticed when I use the blades it continues to run, but if I put the strings in it spins pretty fast and the motor shuts down. I'm not sure if that's a safety feature or what.
@starastronomer2 жыл бұрын
CurtisTheGreat I only use the "string" in my weed eater. I've never had this happen to me.
@robertartigue554111 ай бұрын
Yup same here, motor just keeps shutting down when I use the lines, but the blades work fine... sucks
@MrWhitelightning7311 ай бұрын
Outstanding
@starastronomer11 ай бұрын
THANKS 👌
@bradbarefoot29869 ай бұрын
I'd be afraid the open motor air holes will "suck up" some grass, especially wet grass and cause the 24vt motor to short out.
@starastronomer9 ай бұрын
I've had no issues whatsoever.
@LordLyon Жыл бұрын
Thank you for the great video! One question, and forgive me if it's a noob one, but since you just twist on the new head and don't have a nut to secure it, is there any chance the head can loosen and fly off?
@starastronomer Жыл бұрын
You're welcome. There is a nut to hold it on. No issues.
@Seanyboy052 жыл бұрын
I have the same 24-volt brushless string timmer from Kobalt. The one that uses the .080 string. I noticed in the video that this Shakespeare head allows you to use .095 string. Is this string good to use when trimming against a chain link fence? The .080 string seems to be deteriorating pretty fast when I trim around my chain link fence. It is quite annoying 🤬🤬
@starastronomer2 жыл бұрын
Sean Chase I use .095" Vortex Trimmer Line, item 12179. Holds up very well. Here is my review: kzbin.info/www/bejne/hHXPoYmohL6ZndU
@Seanyboy052 жыл бұрын
@@starastronomer can I use the .095 vortex string with the default head or do I need to install the shakespare modification to use it?
@starastronomer2 жыл бұрын
That I am not sure of. Does the manual say a maximum size string you should use for your stock cutting head? If not and the .095" fits then if it were my unit I'd try it. Let me know.
@WatersmithGuild4 ай бұрын
I made this conversion, however, I'm having a lot of issues with the line breaking off down to a nub after just 5 or so minutes or relatively light use. I tried the original line (.095) and their professional grade line. Both still having that issue. Anyone else encountering this and find a solution?
@luisaguirre45092 жыл бұрын
Hello. Having issue with my conversion. The string keeps getting cut. It will trim maybe about 10 feet and the it’s down to the nub.
@starastronomer2 жыл бұрын
Luis Aguirre If I understand you correctly it isn't the "conversion" but the string you are using. It doesn't hold up, am I correct? Could be string isn't strong enough for what you are trying to cut. Perhaps even cutting around steel fence post or concrete. They can be very hard on string. This is what I use: kzbin.info/www/bejne/hHXPoYmohL6ZndU
@luisaguirre45092 жыл бұрын
@@starastronomer right after I sent the comment I tried a different string at seems to be working. Thanks for the video and thanks for taking the time to write back.
@heavychevy46162 жыл бұрын
man... that was exactly what i was lookin for... thank u! ...& quick question please, the nylon blades on the shakespeare, are they to "aggressive" (ie; would they damage?) a plastic fence? ...i have a white fence around my property that looks like a wood fence but its actually some sorta plastic?/pvc?/poly? of some sort... im thinkin the string might be safer, but was just currious what u thought having used them...? thank u sir
@starastronomer2 жыл бұрын
HeavyChevy THANK YOU! I would definitely not use nylon blades. Way too harsh for that. They are made for heavy stalk type weeds or brush. In fact be very careful with any string line. I would recommend you take a test piece of fence and use very light weight cutting sting and see what happens. I do not have that type of fence but have seen the material and it could get damaged. I know they are not cheap.
@heavychevy46162 жыл бұрын
@@starastronomer great advice, thank u sir
@benedettifamilytv2 жыл бұрын
Hi there. Thanks so much for you video. Is it the case that when you start to disassemble the original head, you just push down on the center part and turn it to remove it? I am unable to remove the center part, but perhaps I just need to be more forceful. Thanks!
@starastronomer Жыл бұрын
It's been awhile since I did this. I thought I showed it in the video.
@fabiomorales90052 жыл бұрын
How you took the screw nut off !! Because it turn while you trying to loose the nut
@doejhonny2 жыл бұрын
you'll have to either cut or possibly melt the head to get it off. Seems to be a one way process.
@ryanbarnes2570 Жыл бұрын
Having this issue also, did you get it
@Mixwell1983 Жыл бұрын
@@ryanbarnes2570 an impact driver or impact wrench works well if ya have one. Got mine off in a few seconds using my impact driver
@brownlj2013 Жыл бұрын
Can’t get the socket in there. There isn’t enough room. Any ideas?
@paulgee4336 Жыл бұрын
Would have been nice to have an update after a year and two.
@starastronomer Жыл бұрын
No issues.
@BombaySauce10 ай бұрын
I have the same setup but after i replaced the head, the trimmer shuts off when i get into slightly thicker grass. So far i havent found or solved the issue. Any clues?? I dont really want to go get another weed trimmer as a replacement.
@starastronomer10 ай бұрын
@BombaySauce I do know that my 40+ year old gas trimmer has way more power in heavy areas of cut. I find the Kobalt works great otherwise. It will shut off to protect the electric motor so as not to over heat if it gets bogged down. I've had that happen several times. One thing is to not force the trimmer at a fast pace in heavy areas.
@carlthornton307611 ай бұрын
Very Good!... #124 ✝ {9-13-2023}
@starastronomer11 ай бұрын
You're welcome @carlthornton3076
@tylerhewett3750 Жыл бұрын
You seem to be very knowledgeable however mine is a 14 inch cut(same kobalt trimmer otherwise) would this work??
@starastronomer Жыл бұрын
@tylerhewett3750 Don't see why not but can't be 100% sure. This same head fit my 40+ year old gas trimmer.
@deanngould6782 жыл бұрын
Any idea what size the spring is that comes in original set up?
@starastronomer2 жыл бұрын
I threw it out so no longer have it.
@nickabel82793 жыл бұрын
Motor burn up yet? I did something similar (covered the holes with tape for trial run) to my atlas 80v and noticed the motor is much more prone to shutting off now
@starastronomer3 жыл бұрын
Covered what holes? I never modified anything other than shown in the video. Can you please give a detailed description of qhat you mean? No issues with my unit.
@starastronomer3 жыл бұрын
I see the Atlas is from Harbor Freight. Don't know anything about that trimmer.
@nickabel82793 жыл бұрын
@@starastronomer the holes where you can see the motor (you mention them in the video). Kobalt, greenworks, and atlas are all made by the same warehouse
@starastronomer3 жыл бұрын
I would not and did not cover those holes. When done with use I blow out that area with my compressor. No issues. You want air circulation.
@nickabel82793 жыл бұрын
@@starastronomer that's what I ended up deciding after it shut down a few times and I noticed not much grass seemed to be on the taped area. Appreciate your update to the situation
@curtpark43162 жыл бұрын
How do i get the piece off the kobalt to change the attachment head??
@starastronomer2 жыл бұрын
I showed in the video Curt.
@curtpark43162 жыл бұрын
@@starastronomer mine is different or something.. so weird
@willmartin7922 жыл бұрын
I need the inner reel spring
@tbfbbu10 ай бұрын
Does this work on 80 volt?
@amtlaxcala Жыл бұрын
How did you took apart the old head?
@kevinmurtagh6335 Жыл бұрын
Yes I'd like to know that also it's so tight it's soaking in WD-40 now I hope I don't ruin it ????
@maureenlaforme1240 Жыл бұрын
Have you done a black and decker?
@starastronomer Жыл бұрын
I have not Maureen.
@nathanmccorkle42782 жыл бұрын
Do you think this model trimmer is powerful enough to run a metal mulcher blade? Basically a 12 inch piece of rectangular steel
@starastronomer2 жыл бұрын
Nathan McCorkle Short answer: NO Long answer: F^CK NO!!! :)
@nathanmccorkle42782 жыл бұрын
@@starastronomer any idea on the 80V? I've got a backpack mounted honda gcv160 with brushcutter blade, and it's nice but I'm interested in something quieter so I can take it with me on hikes and casually whack at (invasive) blackberries
@starastronomer2 жыл бұрын
Nathan McCorkle Sorry, I can't be of help with that. My initial thoughts are no. If it does work I would assume it will eat up quite a bit more battery giving less run time. I do agree these run nice and quiet. But I will say it does not out power my 40+ year old gasoline powered Toro unit. Gasoline still rules at the moment. My gas rips through heavy grasses with ease.
@carlmorgan84524 ай бұрын
I hate weedeatering with a passion. 64 years old and it kills my low back. Even with shoulder strap installed. HATE IT !
@SGAOuTLaWz3 жыл бұрын
Did you notice a difference in the run time? How long does the pre-cut line typically last?
@starastronomer3 жыл бұрын
Chris Can't say for sure on run time. Too many variables come into play. Again, same for the trimmer string.
@barrylafleur62202 жыл бұрын
It seems to run the battery down a little bit faster. I typically change the strings out at least 3 or 4 times. I precut string, it doesn't take long to switch them out.
@kevinriddle36112 жыл бұрын
is yours still running well?
@starastronomer2 жыл бұрын
No issues.
@MrDamonster943 жыл бұрын
Do you think it will work for the 40v trimmer as well?
@starastronomer3 жыл бұрын
Darren I'm not sure. Don't know anything about the 40v unit.
@MrJson10063 жыл бұрын
Darren, any luck on figuring out anything with the 40V? Thanks in advance!
@augustmoon59353 жыл бұрын
I think they made the 40 volt so u r stuck with their spools.
@geotrick3 жыл бұрын
I replaced an older Kobalt 40v with a Shakespeare Wind-N-Go Bump feed. The kit didn't come with the nut you need to secure it. It needed a M10-1.25 nut that I got from their hardware department. I also reused a bushing that was behind the original head for alignment. It was back together in a couple of minutes after I had the proper sized nut. I personally have the 24v and I was looking to put the Ugly head on it.
@mitchelljohnson79132 жыл бұрын
@@geotrick I just go that same Wind n go and I’m having the same problem with the nut. Been driving me crazy the last couple of hours. I’m glad I saw your comment, now I’m headed back to Lowe’s for that nut!
@fordfan31792 жыл бұрын
How does it do as an edger?
@starastronomer2 жыл бұрын
Only used as a trimmer.
@josuecitoflores5224 Жыл бұрын
Hey, might you be willing to sell the original head from your 24v Kobalt weed eater?
@starastronomer Жыл бұрын
Hello Josuecito. I want to keep it. Can't you buy them from Lowe's?
@josuecitoflores5224 Жыл бұрын
@@starastronomer Ohh yes I see. But no they don’t sadly. I’ve been trying to find a different head that could fit the screw on my 24v trimmer. Might you know of any that can fit it?
@starastronomer Жыл бұрын
Josuecito Flores Sorry, I do not. Do what I did in the video.
@danzag07672 жыл бұрын
You talk too much! Just get to the point!
@starastronomer2 жыл бұрын
TELL YOU WHAT Danzag076...you do your own video if you don't like mine!!! I have to wonder if you are smart enough to think past your nose??? Keep your ST^PID SCHITT remarks to yourself and stay on your meds!!!!!! ON MY CHANNEL I'LL TALK ALL I WANT; UNDERSTAND?????????????????????????????????????????? Also, I see you have ZERO videos of your own uploaded. I have over 500 to date. I see your level of competence is the same as the amount of videos you've uploaded......