Modular Planetary gearbox 1024:1 - 3D Printed

3D Printed - Modular Planetary gearbox 1024:1 (4:1, 16:1, 64:1, 256:1)
Design in FreeCAD
For sources see:
www.thingivers...
or
github.com/rom...

[@musikspaceofficial]

Can we use this for your designed EQ mount

[@samiayyldz2262]

I pressed in the same way, but the gears do not fit, the middle gear is large

[@johnymerida2110]

Excelente..!!

[@johns6014]

Is this with a Nema 17 - or is it at least compatible with either a 17 or a 23? Also, what kind of screws do you use to hold the whole thing together, and what kind of grease are you using, if I might ask? This looks like a very good and useful design. Thank you for sharing it.

[@RomanHujer]

- Motor is NEMA17 - Screw is Self Tapping 2x6 for example www.ebay.com/itm/301828057475 - M3 threaded rod and M3 nuts,

[@geobruce1995]

very nice design!! do you have any guides or tutorials on how to design this in freecad?

[@papilyon]

good job!

[@mkahya09]

omg so nice

[@3dprintwiz378]

Torque test please.

[@samiayyldz2262]

hello, can it lift 30 kg load? with nema 17

[@RMANUEL1996]

Do you know how much torque the output can handle?

[@RomanHujer]

Test only rotation 2kg telescope see kzbin.info/www/bejne/aKasfmB3otFqg80

[@mustafakemalgurcay6187]

arduino motherboard box goto drive etc ... can you share information?

[@RomanHujer]

Viz tento odkaz www.thingiverse.com/RomanHujer/collections/onstep or www.thingiverse.com/RomanHujer/collections/astronomy-telescope

[@ameliabuns4058]

what's the purpose of those 3 blocks in between the gears?

[@samiayyldz2262]

Hello there. I wonder if this system is strong enough to turn a 20 kg carrier, I want to connect directly to the shaft and run I use onstep .and make my own transporter

[@justinberdell7517]

Why the hell is it flipping?