MOE rifle stock

[@davem5862]

10 years later and this is still relevant, at least for this guy, Thanks

[@Munky332]

I like the MOE, I have the MOE carbine fixed stock, but I really wish they went with the A1 length instead of the A2, for the rifle version.

[@SaginawGS]

Same especially since it has spacers itd be nice to start shorter

[@bigschank]

Thank you for the video. Best video explaining and showing everything about this stock. Answered all my questions!

[@wildlaw711]

Thanks, I'm looking forward to checking it out on the range. I also added Magpul handguards, all in O.D. green and it looks great.

[@Pmedic605]

He-he-he ... you said "butt pad."

[@wildlaw711]

Hey again. I did buy the magpul stock for my ar-10. I have a question. When you installed your sling socket into the space close to the receiver, did it completely mount flush? I pounded the hell out of mine and could not get it mounted flush to the stock. Did you have this problem? If so how did you remedy this? Thanks in advance for any insights.

[@bgallaher77]

Thanks. Planning on using this stock on my next build.

[@wildlaw711]

By the way, your video on sighting in the ACOG really helped me out last winter. I purchased the TA-11E with red chevron and mounted it with a Larue mount and really like the setup.

[@robpetry84]

Super informative. All the info I was looking for on this stock and no BS. Subscribed.

[@andreg36k]

Fantastic video. Info answered all my questions and more . Thank you.

[@EN2HAMMSTER]

No it will not be flush in the front,but it works fine.

[@MT_Pant_Suit]

Thank you Sir. Great video... been eye balling one of these vs an A2.

[@scottfitzgerald8888]

Thanks for the vid. You addressed all the points I was curious about. Very thorough and informative.

[@Skidjit]

Thanks for the info! Defiantly looking into this stock for a future build.

[@s.o.f.fpatriotsforlife414]

EXACTLY the video I was looking for

[@JohnDoe-zb7dz]

Your rifle is no place to store goodies. "If you don't watch your ounces you'll be crying about the pounds." -Nutnfancy

[@animalmother556x45]

John Doe Please don't quote him. People in the ACTUAL gun community do not value his opinion. He is an idiot.

[@JP-zj8xf]

animalmother556x45 lmao

[@kylesonsalla7620]

Spare gun parts ON the hun is about the best place for them to be. Magpul bolt and pin core for the pistol grips is very hand.

[@SaginawGS]

Disagree. My 20" is my travel gun it has a cleaning kit stored. Everything in one package and the small increase in weight isnt much

[@Bob1942ful]

Excellent info. Answered all my questions.

[@wildlaw711]

Great review. I have an Armalite AR10 rifle that I want to upgrade. This may just fill the bill. I thought about an adjustable but don't want to break the bank. Thanks again for showing me this option.

[@Honk_Clank]

Only considering this because can't find a complete colt a2 assembly :(

[@Longrangetargets]

The door mechanism seems a little cheap, like it might open by accident or not close if used a lot.

[@johnniewasr5740]

I thought it looked janky also

[@michaelc3416]

Will a standard USGI cleaning kit, with segmented cleaning rod, fit into the storage compartment of the MOE stock?

[@SaginawGS]

W the triangle stock bag yes but not w the velcro and snap w alice clip pouch

[@MT_Pant_Suit]

Thanks for making this, very helpful

[@tripplebeards3427]

Does the magpul have a wider cheek weld?

[@palo1942]

Do you know if there are any aftermarket ruber buttplate for the A2 stock?

[@FandCCD]

Best brand for the buffer tube kit?

[@mikes8783]

holes at the bottom ?

[@rantsanchez]

Anyone who has had this for a while can comment on how it has held up? Any rattle at all?

[@TheDoug9901]

IF AN ADJUSTABLE stock wiggles and slides a little back forth won't that bother accuracy

[@Kevin-fj5oe]

If it isn't a precision rifle, probably won't notice it

[@TheDoug9901]

@@Kevin-fj5oe I also have a 700 they throw away the factory stocks the adjustable junk is a million times worse

[@NavYblu99]

Extremely good info. Thank you.

[@franciscocazares3845]

Awesome video

[@SaginawGS]

Great video. So much good info. Thanks

[@ryankc3631]

Think I'll keep my standard A2 stock.

[@dlarson1965]

Excellent review!!

[@EndingTimes0]

Lol... Butt spike.

[@noretreat2074]

You're video is very CLEAR to what I need for each stock. I am still deciding. But I am replacing carbine stock. Looking for the new GRAY COLOR.... looks dope with BLACK. ALL BLACK RIFLES MATTER

[@mikesieves6902]

im building an ar 15 in 6.8 spc. alls i need aside from the stock is the extension tube? what about the spring and the actual buffer? EN2HAMMSTER

[@Rob_Nasty]

5 years ago and no answer. Are you dead?

[@toddhayslett8269]

Will the m-16 buttstock cleaning kit fit in the magpul stock?

[@cardboard_shaft]

yes it will

[@matthew7972]

Will this work for my Diamondback DB 15?

[@NR-vm7uc]

matt mcmahan yes. I have it on mine

[@matthew7972]

Sweet thanks

[@NR-vm7uc]

matt mcmahan you do need a new spring, buffer and buffer tube

[@jacoblozano5487]

do i need to use that screw or can i use the scre from the a2

[@rcehome]

You must use the included screw.

[@Jettmech]

Can this stock be used on a DCM rifle?

[@williamcarmine8868]

Not sure what brand DCM is or what it stands for. But, this stock will fit any .223/5.56 caliber AR15 rifle with a rifle length stock tube. Does not work on the collapsible stock tube.

[@MC-td4ol]

Excellent. I thought I did not need the extension, now I know for sure. Thank You.

[@KILROY-cp6qq]

will this fit a bcm lower that comes with the recover extension?

[@Michael-yq1oo]

Great Review

Is it made out of metal

[@stevoe1972]

good video. good information. no bologna.

[@MrChet407]

Haha nice name hamster

[@JM-iw9tj]

UH UM UH UM UH UM

[@justinnguyen9176]

Nobody cares

[@jakerudeseal9066]

Says the kid who records gta by filming his tv