Tamiya McLaren SENNA 1/24 Scale Model Full Build

Рет қаралды 32,873

Күн бұрын

Пікірлер: 97

@TheMozerfok 4 ай бұрын

Dark wheels is a must! I like how you go beyond any normal build like what you did with the grille, the heat shields near the exhaust, the body work... Truly gorgeous build!

@mokeipaint 4 ай бұрын

Thank you. I'm happy that it made you happy. Black wheels are cool😀👍

@laurenciozabala4296 4 ай бұрын

Having the GMA T.50 and McLaren SENNA chassis side by side, you can see amazing similarities in the cabin area. Fascinating!

@mokeipaint 4 ай бұрын

Thank you. I thought the same. The chassis of the GMA T.50 and the McLaren SENNA are very similar.

@leonardobecuzzi7196 14 күн бұрын

Complimenti, ammiro il realizzatore del modello, uso unun aggetivo che vuol dire tanto Bravone!!

@Rob-yr4cb 4 ай бұрын

Hello. Great videos! It would be very nice to see a list of items that you use when you build your models. Like the sanding sticks for example. Tweezers. Etc.

@mokeipaint 4 ай бұрын

Thank you. I'll show you the tools in a future video😀

@user-pc8mg1sc2p 2 ай бұрын

塗装後の接着剤は何を使ってますか？

@user-wf4yc5vt6q 3 ай бұрын

マクラーレンとてもカッコいい～大好き～‼️❤️💕アイヨ～❤️💕☀️😂😂🐍🐨🐨🐳💐💐💓💓❤️🎊🎊🐶🐶🎶😄😆😆😉🤣😍💮

@andrewgrace4410 Ай бұрын

Beautiful build 😸👍🏾

@leftpastsaturn67 4 ай бұрын

Spectacular. The dark wheels win for me. Superbly filmed and edited as always.

@mokeipaint 4 ай бұрын

Thank you. The black wheels look cool and race car-like.

@ScaleModelExperiment 4 ай бұрын

It was even better watching it again. Spectacular work Masa Sensei👍 I like the bright wheels 😎

@mokeipaint 4 ай бұрын

Thank you James. Black wheels are cool, but silver wheels look bigger and more like a super sports car. I'm sorry for the late comment, but I've been feeling unwell🙇

@ScaleModelExperiment 4 ай бұрын

@@mokeipaint I hope you feel better soon 😉

@mokeipaint 4 ай бұрын

@@ScaleModelExperiment Thank you James. I will do my best to make you happy😀

@ScaleModelExperiment 4 ай бұрын

@@mokeipaint 🤣

@dave8229 Ай бұрын

The car's interior with so much work and perfect touch is done, isn't able to view it once it is covered.

@darthhokum 21 күн бұрын

Perfect build 💪💪💪

@renatotanaka1044 4 ай бұрын

This video is so perfect!!! I loved it with the black wheels.

@mokeipaint 4 ай бұрын

Thank you. The black wheels look cool and race car-like😀

@KarlScaleModeling 4 ай бұрын

Very nice, amazing work like always. I prefer the dark rims myself, but both look great on the Senna. Well done again 👍🏼👍🏼

@mokeipaint 4 ай бұрын

Thank you. As you say, both wheels look good on the McLaren Senna! The silver wheels look like a super sports car, and the black wheels look like a race car and are cool😀👍

@drafting5652 4 ай бұрын

Absolutely amazing thank you for sharing all your amazing work have a great weekend can't wait to see your next build 🙂

@mokeipaint 4 ай бұрын

Thank you. Please look forward to the next video😀

@jimmccauley9099 3 ай бұрын

You just keep amazing me with your work. Would you ever consider building a late 60s American muscle car?

@allenshirley1077 4 ай бұрын

I like the chrome Beautiful work!

@mokeipaint 4 ай бұрын

Thank you😀

@Jeff-cv4qn 4 ай бұрын

Awesome build and great video Dark wheels for sure!

@mokeipaint 4 ай бұрын

Thank you, I thought the black wheels were cool too😀

@rajaramsivasankar6864 4 ай бұрын

Awesome work as usual! I continue to enjoy your videos and looking forward to the next one!

@mokeipaint 4 ай бұрын

Thank you. I will do my best to make the next video so that you will be happy.

@michaelbaykara2322 4 ай бұрын

Great work Mr. Mokei- Black Wheels sir.

@mokeipaint 4 ай бұрын

Thank you. The black wheels look cool too. When I tried the black wheels on, I thought they looked surprisingly cool😀

@eduardovieira1919 4 ай бұрын

An overcomplicated model of a overcomplicated car. You dealt whith it very "classy" way! In a 40 minute video there is no way someone who is not a modeller to understand the work behind it! One thing i have to throw at you, friend... You MUST treat the tire brake of the wheels (the inside part of those)... You do a lovely job in the undersides, opening holes and adding details to the chassis and subchassis, but if you do not take care of that wheel "Inside", these wreck your work!! As always: Best regards!!

@mokeipaint 4 ай бұрын

Thank you. As you said, I use the inside of the wheel as it is in the kit. Previously, I processed the inside of the wheel and attached it to the body, but over time the weight of the body caused the wheel to deform, so I no longer process the inside of the wheel. The wheel is made of polystyrene resin and has a camber angle, so force is applied to the inside of the wheel🤔

@eduardovieira1919 4 ай бұрын

@@mokeipaint This is true! Thghether with the pressure of the tire itself the possibilities of bending increase... I know people who exchange the inner and outer edges of the wheels for turned metal ones... But hey... i would like to make more than 2 models in my lifetime, so... Plastic they remain... One thing that makes me sad, tho... is the abcence of branding on the tyres...

@mokeipaint 4 ай бұрын

@@eduardovieira1919 Previously, the tires of Tamiya kits had brand names on them, but now they do not. I think this is either due to copyright issues with the tire manufacturers, or because they reuse tires to reduce the cost of the kit.

@Boomereng-cb34 Ай бұрын

Amazing work. Thanks for sharing.

@lucamicalicapparelli4825 4 ай бұрын

Wow! Your technique is exceptional, I already told you. Did you also use a clear 2K bought in your area here? Even though I almost certainly won't find it in Europe, could you tell me the brand and characteristics? I would also like to clarify...in the panels do you apply primer on the outside with tape on the inside, then paint with black inside, mask again and paint the outside? But don't you have overspray on the outside after you give the black inside? Thank you.

@mokeipaint 4 ай бұрын

Thank you. Is there a store that sells car paint near where you live? Or try asking at an auto repair shop.

@mokeistudio9960 4 ай бұрын

マサさんの動画を見ると不思議と本能的に模型を作りたくなってきます私がカーモデルを作るようになったのもこのマクラーレンセナの動画がきっかけでした... 少し相談事になってしまうのですが、私只今大学4年生でして将来に悩むことが増えてきました。マサさんがこれまでどういうお仕事をされてきたのかもし良かったらお伺いしたいです

@mokeipaint 4 ай бұрын

ありがとうございます。将来の事で悩むのはわかります。現在の日本は不景気が続き、このまま日本人が目を覚まさなければさらに悪化するでしょう🥲海外では現在給料が2∼3倍以上になり日本は低所得者層の多い国になってしまいました。20∼30才の未婚率は80%になり、派遣労働者が多いのも全て政治の責任です。その政治家を選んできたのは戦後生まれの大人達です。若い方が将来に夢や希望のもてない国で良いはずがありません。 KZbinを始めたのはmade in Japanが復活してほしいと言う気持ちからです。私が高校生の時にバブルがはじけました。大学には進学しましたが、すでに就職難で親に勝手に決められた会社に入社しました。引き抜きで転職出世を繰り返し、ほとんど寝ずに働いていた為、仕事中にたおれドクターストップがかかってしまいました。医者によると命を落とす手前だったそうです。一つ言えることは自分で選んだ道を進むべきです。ピンとくるものがあれば「いや、でも」と否定せずに実行して下さい。ピンとくるものがあると言うことは本能的にどんな困難があっても「それはできる」と知っているからです。私はピンときたものは全て成功しています。これは20代の時に世界で活躍する日本人達に教わりました。長くなりましたが、時間がかかっても自分がピンときた道に進んでください。必ず良い道が開けます😀

@mokeistudio9960 4 ай бұрын

@@mokeipaint 丁返信いただきありがとうございます🙇‍♂️ コメントに対しても丁寧な姿勢が本当に尊敬します大変な道を歩まれているのですね... 困難も沢山あると思いますが、自分の直感を大切にしてみようと思いますこれからも密かに応援しております📣

@overworldsanguinar8153 4 ай бұрын

做的很漂亮

@mokeipaint 4 ай бұрын

谢谢😀

@hhaste 4 ай бұрын

Great job. What was the putty for, on the chassis at 4:04?

@mokeipaint 4 ай бұрын

Thank you. The reason I put putty on the chassis is because there is a dent in the chassis. I sanded the putty off with sandpaper, and the dent is where the putty remains. Once assembled, the chassis is almost invisible, but it doesn't look good to paint the chassis with a dent in it in a KZbin video...🥲

@anthonyw5261 4 ай бұрын

Absolutely beautiful build ❤👏👏🫡. I like black wheels but sometimes I do but I will always choose a different color

@mokeipaint 4 ай бұрын

Thank you. Foil colors are difficult! I can't decide between them🤔

@lilnovate460 3 ай бұрын

Masterwork.. !! 🎉

@user-ch5op9xt7d 4 ай бұрын

すごく塗装も綺麗で凄いですねプラモデルにおいて綺麗に塗装するコツなどありますか？

@mokeipaint 4 ай бұрын

ありがとうございます。漠然とコツと言われても答えるのが難しいですね🤔 「何に困っている」なら答えやすいのですが… 数を塗って感覚で覚えるしかないですよね🤔

@user-ch5op9xt7d 4 ай бұрын

例えば質感の再現に困ってますエンジンの金属感やシートの布感などについてお聞きしたいです。

@mokeipaint 4 ай бұрын

@@user-ch5op9xt7d それも漠然過ぎて難しいですね🤔 金属感は動画で紹介している様にアルミ表現でもジュラルミン、鋳造アルミ、鍛造アルミ、削り出しアルミ、ステンレス、鋳鉄、亜鉛などで違いますが、基本はシルバーを塗ってメッキ調塗料を軽く乗せます。金属によって使うシルバーも異なります。フラットアルミを混ぜたり、シルバーにクリアを吹くときもあります。メッキ調塗料にクリアを吹く時もあります。エキゾーストパイプもステンレスならブラックベースにメッキ調塗料、クリアですが、亜鉛メッキパイプならベースはシルバーです。皆さんがしている様な流し込みは一切していません。流し込みをするのが良いと思っている方が多いようですが、流し込みは古い金属や油で汚れた金属になってしまいます。私の方法は新車の金属表現です。この方法で流し込みをしなくても凹凸感は出ますよ。シートの布も色んな種類があるので一概に言えませんが、皮の質感などはフラットベースで調整しています。ダッシュボードとシートも質感が違うのでフラットベースの料が異なります。シートの布などはフラットベースや日本画の顔料を混ぜています。写真や実物をじっくり観察していると何を混ぜると良いかだんだんわかって来ますよ😀

@user-ch5op9xt7d 4 ай бұрын

ご返信ありがとうごさいます。参考にさせていただきます😊

@Y.F.delica-mini 4 ай бұрын

［マクラーレンセナ'20］マクラーレンの中で［公道で魅せるGT3レーシングカー］ですよね。😊 720Sとの差別化も目立っています。😊

@mokeipaint 4 ай бұрын

720sはあくまでメルセデスなので…😀

@Y.F.delica-mini 2 ай бұрын

@@mokeipaint ［マクラーレン 720S］は［メルセデス・ベンツ］とは違い、［P1］のハイパフォーマンスと［GT］のプレミアムのバランスに優れていて、［マクラーレン］にしか出せないワンランク上のスーパーカーです。😃

@aeris-mo 4 ай бұрын

Look great

@mokeipaint 4 ай бұрын

Thank you. I also think the black wheels look cool and race car-like😀👍

@goforitpainting 4 ай бұрын

Looks cool.

@eolix_ 4 ай бұрын

Dark wheels look better 🖤

@mokeipaint 4 ай бұрын

Thank you. I also thought the black wheels looked surprisingly cool😀👍

@eolix_ 4 ай бұрын

Wrong title sensei! This is the Senna🤗

@mokeipaint 4 ай бұрын

Sorry. I posted a video of the McLaren Senna while I was working on the T.50, so I got the title wrong. Thank you for letting me know🙇

@amirhamzaozi2205 3 ай бұрын

what is the price after all this customization.

@luto2000 4 ай бұрын

what sanding board/file do you use at 4:30?

@mokeipaint 4 ай бұрын

I use sandpaper attached to a polycarbonate board with double-sided tape.

@luto2000 4 ай бұрын

@@mokeipaint awesome, Thanks!

@chartreux8673 4 ай бұрын

自分ならこの赤ならシルバーホイールかなしかしさりげなく見せるポリパテの盛り方のスムースさにいつも感銘を受けるのですが何かコツはあるのでしょうか？大抵は削るとボサついたり気泡が現れたりする事が多いのですが自分はラッカーうすめ液なんかを1滴垂らしたりしますけど結局再パテで表面処理やり直したりで二度手間かかっちゃう

@mokeipaint 4 ай бұрын

ありがとうございます。赤にはシルバーホイールが綺麗ですね! ブラックホイールもレースカーっぽくてクールですが、どちらかといえばシルバーホイールですかね∼🤔 動画中のパテのねり方はプロが使うねり方です。パテをつける時、最初の1回目はペーパー目にすり込む様に付け、2回目は乾燥後にパテがどのくらい痩せるか計算して最小限の量をヘラで伸ばす様に盛り、乾燥機で乾燥させます。パテの付け方でパテを削る時間が全然違うので綺麗にパテが付けられれば削る時間短縮になります。このパテの付け方もプロのやり方です。パテは盛り過ぎるとどうしても気泡が入ります。ヘラで伸ばす様に塗るのがコツです😀

@crypton_0486 4 ай бұрын

Is this real T.50?? The title settled wrong…

@mokeipaint 4 ай бұрын

Sorry. I posted a video of the McLaren Senna while I was working on the T.50, so I got the title wrong. Thank you for letting me know🙇

@gcucu75 4 ай бұрын

Bellissima 👏🏼👏🏼👏🏼

@mokeipaint 4 ай бұрын

Grazie😀

@s4r943 4 ай бұрын

ホイールはシャンパンゴールドにしたいですね

@mokeipaint 4 ай бұрын

赤にシャンパンゴールドは定番ですね! 実車で赤にゴールドフレーク塗装もありますね! このマクラーレンセナはオレンジ系の赤なのでシャンパンゴールドホイールならもう少し濃い赤が良いかもしれません😀

@haroldquill8761 4 ай бұрын

Dark wheels, a master build. 😮

@grenphelps7455 4 ай бұрын

Silver wheels everytime...

@mokeipaint 4 ай бұрын

Not every time it is silver wheels....🤔

@grenphelps7455 4 ай бұрын

@@mokeipaint silver wheels, everytime 😂😂😉 black wheels are a bit pointless, unless your racing, because why spend all that money (if they were real) only to not be able to see the details from 5ft away 🤷

@mokeipaint 4 ай бұрын

@@grenphelps7455 I hear that some people buy the real thing because of its asset value. Super sports cars hardly ever lose value, so if you sell the car, you can get instant cash🙂