MOLD BUILDING SECRETS Witness the Exciting Fiberglass Mold Separation Process!

In this tutorial, you will learn the step-by-step process of separating a fiberglass mold without causing any damage to it. Whether you're a beginner or experienced in fiberglass mold separation, this video will provide you with valuable tips and techniques to ensure a successful and smooth separation every time. Watch now to master the art of separating fiberglass molds effectively!
#FiberglassMold #MoldSeparation #DIY #Crafting #FiberglassTechniques .
Disclaimer: Always follow safety precautions when working with fiberglass materials.
_________________________________________________________________________
www.fiberglasswarehouse.com
Use code FISHBUMPTV for 15% off your 1st order
Orange Tooling Gel Coat
Orca Air Dry Super Clear Coating-Additive- with MEKP Catalyst
Aqua Blue 100 & 200 Compound
Gray Sanding & Surface Primers
________________________________________________________________________
Amazon Affiliate Links:
Cordless Electric Scissors amzn.to/4ggCeLA
Orca Shimmer Mold Release Wax amzn.to/4dVk0hw
AQUA BLUE 200 Buffing and Polishing Compound amzn.to/3z77hbH
AQUA BLUE 100 Fast-Cut Compound amzn.to/4er5P3N
3M Buffing Compound amzn.to/3XKhQf9
DEWALT Variable Speed Polisher amzn.to/450Q6V8
3M Dry Guide Coat amzn.to/4atIQlL
Hutchins Air Tool Sander amzn.to/4bpY506
Hutchins Long Board Air Sander amzn.to/3wEM2x0
3M Half Face Reusable Respirator amzn.to/4bWsTX3
VOC Respirator Cartridge/Filter amzn.to/3wNYtpGF
Comparable HVLP Air Spray amzn.to/3wRx3j8
6" 80G Grip Sandpaper amzn.to/4c1dtjJ
Roller with 3/8" Nap amzn.to/4apcVmj
ISO Polyester Laminating Resin amzn.to/4apwvyL
MEK Peroxide Adjustable Volume Dispensing bottle amzn.to/3vwMLPZ
Fiberglass Warehouse Polyester Laminating Resin Kit amzn.to/4atW2I5
Fiberglass Repair Kit amzn.to/44TKJHe
Fiberglass Warehouse Pour Foam Kit amzn.to/4aPGNc5
Vinyl Ester Resin- Gallon w/Catalyst amzn.to/3TTSSGz
Fiberglass Chopped Strand Mat- 1.5 Ounce amzn.to/4dCvlCS
Fiberglass Resin DCPD amzn.to/3QOUQao
DEWALT Random Orbit Sander amzn.to/3K7rYGE
Comparable Longboard Sander amzn.to/4bk68f1
3M Hookit Hand Block amzn.to/3K6L2Vj
BOSCH Jigsaw amzn.to/3K6L2Vj
Heat tool amzn.to/3ys0kl5
Brushes amzn.to/3RZlbCs
MEK Peroxide Adjustable Volume Dispensing bottle amzn.to/3vwMLPZ
Fiberglass Roller Tools amzn.to/4aUjIpp
Bevel Square gauge amzn.to/3UN6HH7
Work Light amzn.to/3J1m3lB
Acetone - amzn.to/3tMTUes
Heavy duty drum fan - amzn.to/48K6aej
Gloves - amzn.to/41OpwNk
Fiberglass Warehouse Gel Coat no wax amzn.to/3PXfyUY
Shop Towels amzn.to/3vsRdiC
Paint brushes amzn.to/48K8aDv
Safety Glasses amzn.to/3vSSqN7
Tyvek Suit amzn.to/3RXWohT
Mixing Cups amzn.to/41Y3CY7
Columbia Men's Terminal Tackle Long Sleeve Fishing Shirt amzn.to/3V5ady4
Fiberglass Warehouse 6 Ounce Fiberglass Cloth amzn.to/3PWRqC0
As an Amazon Associate, I earn from qualifying purchases.
________________________________________________________________________
DIY fiberglass mold tutorial, fiberglass mold making process, step-by-step fiberglass mold building, fiberglass casting techniques, best materials for fiberglass molds, creating custom fiberglass molds, fiberglass mold release agents, mold making for beginners, advanced fiberglass mold techniques, fiberglass mold design ideas, DIY boat t-top, custom boat t-top fabrication, building a boat t-top from scratch, aluminum boat t-top installation, fiberglass boat t-top construction, making a boat shade canopy, boat t-top design ideas, budget-friendly boat t-top build, marine welding for boat t-tops, upcycling materials for boat shade structures, DIY boat hard top, boat hard top installation, building a custom boat hard top, aluminum boat hard top construction, fiberglass boat hard top design, marine hard top building materials, boat hard top roof ideas, outdoor boat hard top canopy, boat hard top building tutorial, adding a hard top to your boat, fish bump tv, boat works, gelcoat, gelcoat repair

[@richardmondor1360]

Thats a gorgeous mold!! Shows the experience gained from years of work!!

[@FishBumpTV]

Thanks so much!

[@MikeFolga]

I have done fiberglass work for a living and this is the best educational channel around. You do a great job in explaining an keeping it down to earth and real. Keep up the great work.

[@FishBumpTV]

Thank you very much! I really appreciate your comment!

[@PatrickHoodDaniel]

I was brought to your channel from my interest in the fiberglass work and the surface repair. I am also interested in boat maintenance, navigation, maneuvering and line handling. Lately, since I own a sailboat, I have been interested in bottom cleaning myself, but I have always been a bit fearful of the sealife that sting, bite and push. I have a scuba license and some scuba experience, but haven't done that in a while. Your knowledge of fish also interests me so I can understand these fears better. Always enjoy your videos!

[@FishBumpTV]

Very interesting! Thanks for your thoughts and suggestions! I will definitely take that into consideration.

[@DougAdams-uo1ee]

The mold looks beautiful. It looks like a big red mirror! Yes, I would love going on fishing trips with the 29. Maintenance tips would be awesome. Hope you're back on next week! A teacher absolutely!!! Or the best actor seen in a long time!!!

[@johnhamilton9229]

Thanks for reading my mind.

[@FishBumpTV]

Wow, thanks! I appreciate you watching and commenting!

[@donaldwyatt9005]

Thanks so much for sharing all your knowledge with us. You are a great teacher. Would love to see fishing, maintenance and boat handling. Thanks again

[@FishBumpTV]

Glad you are enjoying the videos! We will try to add some fresh content into the channel for you all. Thanks for watching!

[@mritolduso7355]

I have been following this build and really appreciate your attention to detail! The funny thing is that I think I saw you at the Ft. Morgan launch recently not because I recognized you but the color of the boat you were in. Anyway, love the channel!

[@FishBumpTV]

Very cool! I can almost guarantee you that it was me. We fish down there alot this time of year. If you see me again, be sure to come on over and say hi. I will give you a tour of the 29. Thanks for watching!

[@mritolduso7355]

@@FishBumpTV I will keep my eyes peeled for you and would love to look at that 29!

[@stanmoderate4460]

I always wondered ............... ? Looking forward to see the actual part being made, thanks

[@FishBumpTV]

Glad you enjoyed it! Thanks for watching and commenting!

[@GRPLiningServices]

What we have to remember is despite all the polishing and waxing of the plug the fibreglass of the mould is shrinking down onto the plug basically resisting the release process. Very satisfying when you hear the first release sound :)

[@FishBumpTV]

Yes, I agree! A stuck part is a very bad thing, for sure. Thanks for watching and commenting

[@podocrypto6072]

You could use that T-Top mold to built a 6-8 passenger custom light weight fiberglass or carbon fiber "Golf Cart top!" It's about the right size!!!

[@FishBumpTV]

Haha, yep I guess you could! I hadn't thought of that one. That's what is so cool about this process, you could build so many unique and interesting things that you may be able to buy anywhere! Thanks for watching and commenting!

[@tonyg1958]

Love the way the mold turned out! I'd be very interested in seeing videos of some of your fishing charters. The boat maintenance videos you mentioned would be great as well, it's always good to pick up tips from others to help me maintain my boat better. Looking forward to your next video!

[@FishBumpTV]

Will do! Thanks for watching and commenting!

[@MarcMakowski]

Big thumbs up!!! Thanks Joe! I've been itching to see this mold relise as im getting setup to make a wheel house roof for our sailboat.About 9' x 11'. Thanks again!

[@FishBumpTV]

Glad I could help! Best wishes with your sailboat project!

[@jeffsettles5125]

Have really enjoyed watching you do this project. Didn't realize how much work goes into building a mold.. would love to see a fishing trip

[@FishBumpTV]

Thanks for watching and commenting!

[@dubstylee444]

Shout out to Logan for always having great camera work

[@FishBumpTV]

Thank you, I will be sure to tell him!

[@L8nightride1]

@@dubstylee444 he does do great work. Very steady and gets great shots. I noticed that as well

[@L8nightride1]

@@FishBumpTV he does hold the camera very steady and gets great shots. A testament to his teacher. Going to do great for himself one day.

[@hcv8154]

Yes, we would like to see the 29' at sea. Also, I'm wondering how much would it he for a Boskin 19 modeled after the 29'. Hahahaha

[@FishBumpTV]

Very cool! We actually have a dark green Buskens 19 in our gelcoat restoration video here on the channel. It's also in the background of our how to fiberglass over plywood video. I don't currently have the mold for that boat, but I do know where there is one for sale. Thanks for watching!

[@anthonyshouppe9052]

Yes, I would like to see some fishing trips also. I also saw the 2900 being loaded up on The Big Dan Show the other night and it looks great in the water. Dan also commented on how Impressive it looks.

[@FishBumpTV]

Very cool! I had no idea we were on the Big Dan Show! I just checked it out, thanks for letting me know, I really appreciate it!

[@mikethedesertrat]

It's snapper season. Bring it on! 😊 (p.s. ...those C-clamps made me nervous 😮)

[@FishBumpTV]

It sure is, we caught some nice ones yesterday! I know the c clamps might look a little sketchy, but I have done it that way quite a few times on smaller parts like this with good success. You certainly could drill some holes in the 2x4 frames, and lift that way as well. Thanks for watching and commenting, I really appreciate it!

[@wc6635]

That is awesome! It looks perfect! Though, getting it to release from the plug was a bit scary! HA!

[@FishBumpTV]

Haha, yep! Separating molded parts is always exciting and a little nerve wracking at the same time! Thanks for watching and commenting

[@specialsauce305]

Incredible work and attention to detail! I’m curious, how many hours did you spend on this project?

[@FishBumpTV]

Thank you very much! I haven't added up everything yet, but I might do that at the end of the project. Thanks for watching and commenting!

[@timothypalmer454]

A fishing trip would be great. It would be nice to see how fishing is in the south compaired to how and what we fish for up in here in New England...Also ,love the sandles.😅

[@FishBumpTV]

Haha, yep! I was wondering if anyone would catch my footwear.I ran a charter that morning, and never changed from my flip flops into shop shoes! Thanks for watching and commenting!

[@ewjorgy]

I should not be nearly this excited to see this mold! Excellent job! Absolutely loving this series! Thanks for another great video! All the best from California! 🧡

[@FishBumpTV]

Haha, glad you are enjoying the series! Thanks for watching all the way from California !

[@davewheeler5850]

Absolutely awesome to see the mold separated and the finished result, it was like unwrapping presents at Christmas 😂 I’m really looking forward to the next episode. Captain Joe, once again your time and the sharing of your experience and knowledge is greatly appreciated 👍🇦🇺

[@FishBumpTV]

Thanks for watching Dave! I really appreciate your support and encouragement!

[@TheHerd2002]

Future project houseboat plans . Thanks for all the videos, they have been super helpful.

[@FishBumpTV]

Glad you like them! Thanks for watching and commenting!

[@jakefairley7989]

Thank you so much for putting videos like this out. I have dreamed of building boats my hole life ,and I am so glad to have a great place to find out how to start.

[@FishBumpTV]

Glad you are enjoying the videos and thanks for watching!

[@kirkgemmell5833]

Nice watching from Cape Town refurbishing my own boat too thanks

[@FishBumpTV]

That's fantastic! Thanks for watching all the way from South Africa!

[@AkilAgorillA]

Amazing job and I would love to see the fishing on the 29th and launching and use of the boat please.

[@FishBumpTV]

Thanks! Will do!

[@ropeman3916]

Impressive! Your excitement is proof that you have found your calling. Thanks Capt.

[@FishBumpTV]

Thanks! Glad you are enjoying the videos!

[@doug2202]

Great video Capt. would like to see you do some GOM bottom fishing. One day

[@FishBumpTV]

Thanks, you got it!

[@Kevin-n8g1w]

Fishing trips and boats maintenance would be good and interesting channel is very good

[@FishBumpTV]

Great suggestion! Thanks!

[@MichaelJohnson-jt5cu]

Great job, no fun when you get a mold stuck on a plug. I used to use wood stir sticks ground to a sharp point and wedge them between the plug and the mold to separate the two when needed, the air gun is the go-to method for getting them to separate, as they are under a vacuum with no air between the gelcoat surfaces.

[@FishBumpTV]

Thanks so much for watching and commenting!

[@jimclark2824]

Great job. How many times do you think you could reuse that mold until you had to retire it and make a new one from the plug?

[@FishBumpTV]

Thanks! With good maintenance you could expect to build hundreds of parts potentially.

[@daveharmon9762]

Love the content! Also a great idea to follow along with you on some fishing trips and boat maintenance.

[@FishBumpTV]

Awesome! Thanks for watching and commenting!

[@chrisryals2160]

Have you tried the honeycomb panels before. I has wondering what you think of the material. Great job on the channel. Love all the videos. Thanks Also what do you think of the poured transom material.

[@FishBumpTV]

I don't use honeycomb cores very often, I prefer the solid foam cores like airex and divinicell personally. I have heard good things about the pour able transom material, but mostly on smaller boats. I plan to do a video on that topic as soon as I get a chance. I hope this helps and thanks for watching!

[@chrisryals2160]

Thanks for all the videos. Keep them coming

[@diggy-d8w]

The analogy of a child birthing was a good one.....lmao, I've been waiting for this stage to see both pieces as the plug/part are separated. With every little bit that separates all remaining weight hangs on the places where adhesion is still firm and as fast as yours dropped I guess a good job of wax / proper care before hand lends itself to what we saw here ; a quicker separation. Very interesting to see the nutz/boltz of the process - ty much / peace

[@diggy-d8w]

Pulley's will allow one person to hoist fairly heavy loads but I think I'd want an electric winch if I did whole boats like you experts.... this was a cool video. And she turned out like a mirror. A testament to good prep-work / products in the front end of a project. That's why I've asked you so many questions. Nice job

[@FishBumpTV]

Glad you enjoyed it! Thanks for watching and commenting!

[@davidjohnson9517]

Hell yes! I’d love to check out your charter service via video content.

[@FishBumpTV]

Awesome! Thanks for the suggestion!

[@RonnieMackey-pn9kf]

A fishing trip would be great. Lookin forward to it.

[@FishBumpTV]

Thanks for the suggestion! We just posted a fishing trip video a couple days ago here on the channel. I hope you enjoy!

[@morrishouck8577]

Looks great. I really appreciate your videos. I’ve been restoring an old skimmer style boat and all your how too videos have been extremely useful. I’d would love to see a fishing charter in the 29. Keep up the good work.

[@FishBumpTV]

Great to hear! Thanks for watching!

[@christosphillips3568]

Awesome job man that looks delicious 👏👏👏👏

[@FishBumpTV]

Thank you 😋

[@brian.7966]

you really make interesting and informative films, thank you, Regards from the UK.

[@FishBumpTV]

Thanks for watching all the way from the UK 🇬🇧!

[@WesleyBailey65]

Captain Joe, this is a great series and I can't wait to see the layup. I would also love to see some fishing video's and maybe throw a little, how to, when fishing.

[@FishBumpTV]

Thanks, glad you are enjoying the videos! Fishing vids coming soon!

[@dogwithlaserpointer]

When I was younger, my dream was to become a boat designer and builder, and today, I'd still drop everything to do it. Maybe one day.

[@FishBumpTV]

You could always start small, maybe a simple skiff? Hope the videos inspire and teach some of you all out there to try your hand hand at boatbuilding and restorations. You never know till you try. I appreciate you watching and commenting!

[@ckvasnic1]

Amazing outcome. I can’t wait to start a few projects

[@FishBumpTV]

Thank you very much! Glad the videos are helpful

[@Andrew-lk5ov]

Big step forward!! Really looking ahead to the next phase. Thanks for bringing this process to us.

[@FishBumpTV]

You are so welcome! Thanks for watching!

[@justusbeauchamp4334]

Congratulations on 40k !

[@FishBumpTV]

Thanks so much!

[@brianisnarvid3688]

Like your channel. Watching some of fishing charter trips might be pretty cool. Thanks

[@MrJFoster1984]

Turned out very well in the end. I would like to see your charter trips and engine maintenance videos etc. All of it is interesting. Thanks mate 👍

[@FishBumpTV]

Thanks! Will do! I appreciate you watching

[@Steve-mp4fo]

Your awesome 😎 good job I want to be fishing 🎣

[@FishBumpTV]

Thanks! Will do!

[@L8nightride1]

that is a serving tray for the next time you catch a large tuna. fish prepped in the middle and vegetables and rice on the side around it.

[@FishBumpTV]

Haha, yep! Could be! Thanks for watching and commenting!

[@L8nightride1]

@@FishBumpTV been bing watching. I just bought an old tiara 2600 that I would like to build a hard cover over the helm for shade. I have never worked with epoxy or polyester fiberglass before but done a fair amount of home remodeling doing wood work and drywall finishing. I am paying close attention and thank you. Would love to pick your brain sometime but I know you are busy. Maybe you could answer quick question. If topdeck is soft being 40 y/o would you cut out and put new core in or would you drill lots of holes and shoot epoxy in place

[@cacoste]

You look like a kid the very moment it separated

[@FishBumpTV]

Haha, yep! It pretty exciting!

[@Grudzien34]

👍for fishing trips and boat maintenance

[@FishBumpTV]

You got it! Thanks

[@ronf.109]

Wow that turned out great. Ready for many more.

[@FishBumpTV]

Thank you Sir, I appreciate that!

[@hecdc7703]

Looks great! Thanks for the video.

[@FishBumpTV]

Thanks for watching!

[@johnbankston3967]

Would love to see you add fishing content

[@FishBumpTV]

Awesome, thanks so much!

[@Michael-nx7im]

like to go fishing to see 29 in action

[@FishBumpTV]

Awesome, thanks!

[@camcutcnc]

Hi, what would you use to repair a mold ? Thanks so much. Great video series !

[@knightclan4]

Always great to hear the drag screaming

[@FishBumpTV]

I agree! Thanks for watching!

[@louishall5521]

Yes to fishing....take us out Capt.

[@FishBumpTV]

You got it! Thanks for watching and commenting!

[@isaiascarrillo83]

Fishing videos are awesome. Do it.

[@FishBumpTV]

You got it! Thanks for watching!

[@cube252002]

Would LOVE to spend some time fishing with you good people! Absolutely share some fishing content!

[@FishBumpTV]

Awesome! Thanks for the feedback!

[@MrOddball13]

Excellent "Pop" ....... Nothing worse than a "hung" mould! Well done :)

[@FishBumpTV]

You got that right! Thanks for watching!

[@jasondeel3787]

I would like to tag along for sure

[@FishBumpTV]

You got it, thanks!

[@williamsasse9002]

I want to see some fishing action!

[@FishBumpTV]

You got it! Thanks for watching!

[@poepflater]

FISHING... You made the world's largest TV dinner tray

[@FishBumpTV]

Haha, I guess so! Thanks for watching and commenting!

[@Mvpaladin]

Yeah man, show us the fishin’! I’ve learned a ton from your how-to videos, but it would be cool to see the boat & stuff you create doing what it was made to do. Ultimate “start to finish.”

[@FishBumpTV]

You got it! Thanks for watching and commenting!

[@edwardkiepper1563]

Hi Captain Joe, I was wondering if you could let everyone know about how much time you're investing into this project?

[@FishBumpTV]

I haven't totalled up the hours, but it is considerable. It is still minor when compared to designing and building the mold for our 29 ft charter boat though! I have tried to make a very complete and realistic mold building series so everyone can understand the amount of work that can be involved in these kind of projects. Most of the videos I have seen are for very small parts, and do not go into great detail. I hope these videos help inspire and inform anyone interested in molding fiberglass parts, and I may try to figure up the hours in this project once we are finished. Thanks for watching and commenting!

[@wrongfullyaccused7139]

Beautiful work.

[@FishBumpTV]

Thank you very much!

[@davidc7406]

Yeah let’s go fishing

[@FishBumpTV]

You got it!

[@LostCoastBait]

Would love a video of a fishing trip on the 29’

[@rickforliberty2174]

Great series of videos!

[@FishBumpTV]

Glad you like them! Thanks for watching!

[@howellgrange8257]

Another great video

[@FishBumpTV]

Glad you enjoyed it!

[@fiberglassguru]

Love the flip flops!

[@FishBumpTV]

Haha, thanks! Went fishing that morning, then straight to work on the mold. I will try to wear something more shop appropriate in the next video!

[@DirtySouth33T]

turned out awesome man

[@FishBumpTV]

Thanks!

[@imansetiawan9318]

Love this channel

[@FishBumpTV]

Wow, thanks!

[@markpalmer5311]

Let’s go fishing!

[@FishBumpTV]

You got it! Thanks for watching!

[@jasono5294]

Take us fishing!

[@FishBumpTV]

You got it! Thanks for watching!

[@pedrosilvaprado]

👏👏👏👏👏from Brazil🇧🇷

[@FishBumpTV]

Thanks for watching from Brazil 🇧🇷!

[@Runninwithwrenches]

Hi Joe because of you and your channel I was able to take a rotted out floor rip it out and replace the wood and fiberglass giving an old boat new life ....thank you for all you do

[@FishBumpTV]

Thanks fantastic! Glad the channel help you with your floor replacement!

[@scottf6604]

Outstanding! The comments say it all. TY Capt Joe

[@FishBumpTV]

Wow, thanks!

[@qck57594]

Amazing work and your attention to detail Joe. Yeah, lets see a charter. Thank you

[@FishBumpTV]

Thanks, will do!

[@2twh53]

YES let's get some fishing too!

[@2twh53]

I need to learn a good way to throw a cast net.

[@FishBumpTV]

Haha, I hear ya! We have a few fishing videos up, scattered throughout the channel already, just have to look for them a bit. Hope you enjoy and thanks for watching!

[@DestinInshoreGuide]

This is my new favorite channel.

[@FishBumpTV]

Wow, thanks! Welcome to the channel!

[@manningdriscoll5089]

Looks great !

[@FishBumpTV]

Thanks so much!

[@HeyUncleArt]

That is so cool!

[@FishBumpTV]

Thank you very much!

[@DaveSingleton-h2m]

Would love to see you fishing on your 29

[@michaelmello9510]

Great job 👍

[@FishBumpTV]

Thanks, I appreciate you watching!

[@2twh53]

Whats the total price on all the materials.

[@FishBumpTV]

Around 750. That's using vinyl ester resin, biaxial glass, Airex foam core and all misc shop supplies. Hope this helps and thanks for watching!

[@2twh53]

@@FishBumpTV Thank you! I feel that I can build a swim deck for my boat now. You are an amazing person and a great instructor.

[@FishBumpTV]

@2twh53 you are welcome, glad to help!

[@kerrylove5472]

Always love to see boat and fish videos in my favorite area of L. A.

[@FishBumpTV]

Awesome! I will have some coming soon! Thanks for watching

[@jamesgeorge3900]

Top job mate. Yep let’s go fishing. 🎣

[@FishBumpTV]

Absolutely! Thanks for watching!

[@Scoodlezz]

Would love to see fishing videos and boat maintenance videos

[@FishBumpTV]

Awesome, thanks!

[@locryStudios]

Wow!!!!! Can't wait to start working on my car's hood!!!

[@FishBumpTV]

Glad you enjoyed the video!

[@ilijasmolic9046]

Hrvatski prevod

[@cameronmccarroll9549]

If you were just going to build a one off hard top , what would the process be instead of going to all the effort of making a plug and mould ? Could you just shape up some core foam and glass around that ?

[@FishBumpTV]

Sure, you could do a one off part. I have episode 13 of the hard top build coming very soon, and in that episode I talk in detail about how you can build a part without a mold. I hope it helps,and thanks for watching!

[@cameronmccarroll9549]

@@FishBumpTV awesome mate ! I have a build in about to start on a 7.5m swiftcraft in which I am cutting the cab off the boat and making it a center console style boat ! I will be building the deck flat and building the console and hard top myself and I want to use some form of foam and glass around it all so would be keen to hear about that . Thanks for the videos . They are the most informative videos I have come across on KZbin . Cheers from AUS

[@BobbyWatkins-rv5jr]

Yes more fishing PLEASE !!!

[@FishBumpTV]

You got it! Thanks for watching!

[@remileger8103]

Very nice.

[@FishBumpTV]

Thanks for watching!