Рет қаралды 4,358
Welcome to The Laser Channel where we Learn, Create, and Share!
Follow along as I perform a full mirror alignment on the Monport 40 watt Co2 Laser!
As a Co2 laser owner we’ll need to check and align the mirrors.
This video provides step by step directions from start to finish!
I made the video very detailed because I know a lot of us struggle with mirror alignment.
The steps in the video cover the following:
-Checking if the mirrors need to be aligned.
-Checking laser beam integrity.
Bringing each mirror into alignment starting with mirror 1, then 2, and finally how to adjust mirror 3. When adjusting mirrors I always make only 1 adjustment at a time. Mirrors are checked in the near and far position I always align the far position laser mark to the near position laser mark.
-Check the mirror alignment one last time after securing all the mirror adjustments.
Product links (bookmark for future reference):
Monport Laser Machines:
shrsl.com/43l55
Washer Product links (use these washers to space your laser head up if needed)
Regular Washer-thick:
amzn.to/3J9aKcL
Copper Washer 1.5mm thick:
amzn.to/3H1Uac6
Thin Shim Washers:
amzn.to/3wqhJGu
Stay up to date by checking out our Facebook page: @TheLaserChannel
#monport #thelaserchannel #co2laser