Montana Level 1 vs Grey Skinny Cap

[@SMOENOVA]

the grey white was my favourite for 18 years, but since 1 year i love the level 1 skinny cap. good video btw.

[@codefiveart]

Hey thanks! A lot can be done with just can control too. These are just tools to make them even better. Thanks for watching. I have a sampler set of the other level caps and want to review those.

[@gen.arnavpoe4633]

Both of you are toys

[@codefiveart]

Hahahahhahahahahhhahahahahhahahahahahahahahahahhahahahahahahahahhahahahahahahhahahahahahahahhahahahahhahahahahahhaahhahahahahahahahahahahahahahahahahahahhahahahahahahahhahahahahahahhahahahahahhahahh. Maybe I am, but you’re crazy man

[@PKWModelwerx]

Wow! I would not have expected that much difference! Super informative!

[@codefiveart]

They all play different too! It’s fascinating

[@Major_FaimOfficial]

The greydot is a softer spray. The green level 1 has a delay kinda on it but u get used to it quick

[@codefiveart]

That’s a good point. Different tools for the tool kit. I’ve noticed the level 1 also has a funny sound to it sometimes, ha!

[@JeffPaints]

The grey dot is a Molotow skinny cap and has always been my cap of choice........I want to try the montana one now!! haha thanks!

[@codefiveart]

Thank you! I figured it had another name.

[@kennuimuffins2426]

Thanks, just what I was looking for. I'm not even doing art, its for spray really small laser engraved areas (like 20mm x 10mm in size or thereabouts). I was looking for a very small precise nozzle to reduce overspray from hitting the edges of the acrylic. Going to give the montana water based 100ml cans a try as that range has a nearly perfect shade i'm after. Maybe not the most ideal due to longer dry time but we'll see.

[@codefiveart]

Very cool! From the sounds of it, it might help to make sure you have low pressure cans and maybe even use some stencils to prevent overspray. Or if possible, painters tape to seal it off.

[@codefiveart]

Either way, good luck!

[@kennuimuffins2426]

Thanks, about to pull the trigger on 3 cans. Going with water based 100 series which are low pressure and cheaper (being smaller cans). Picking up montana level 1 caps and needle caps as well to try out. The acrylic has a mask already applied so once it's laser engraved, it effectively has a stencil already - very convenient.

[@Flamekeepers]

I love the Level1 cap for fine lines and the grey skinny cap for details on portraits since its a little more fuzzy and softer then the the level 1 :) The comparison lets you see this difference

[@codefiveart]

Nice dude! Thanks for sharing. I agree with your assessment

[@KidCrayon]

I pretty much just use the skinny cap pros. But good to see the difference between these two!

[@codefiveart]

The true artist can achieve so much with the tools they have. It’s not about the tools but what you can do with them! Haha.

[@EnzoGFXDesign]

Art Primo ftw ! Dude knows his peoples ill tell you that

[@codefiveart]

Yeah dude!

[@TarboxArt]

Ayyy all I use is level 1’s and Montana Black stock caps

[@codefiveart]

Level 1s are dope. No fat caps at all??

[@TarboxArt]

@@codefiveart the Montana blacks with the orange dot but that’s the fattest 🤙

[@iameech]

I love the level1 caps💚 90% of my walls are done with them.

[@codefiveart]

After this video I bought a 50 pack. I’m a convert now.

[@3797ID]

Of the 2 u reviewed I’d take the green Lv 1 all day, but I’m a stickler for those banana skinny caps (except for fills) it’s a pretty good all around purpose cap

[@codefiveart]

I need to go back to the banana and try it again now thay I have more experience. I don’t think i liked it because my can control was garbage. I should do more reviews like this

[@3797ID]

@@codefiveart yeah I most certainly concur brother, I mean I can speak to your can control (or lack there of); I’m just saying I like comparison videos of different paints/caps & all that jazz ☮️🎨💜

[@codefiveart]

@@3797ID I’ll work on it! I’ll get there some day

[@3797ID]

@@codefiveart dude Ur there now, *please don’t misconstrue* I’m in no way poo-poo-ing on Ur graff prowess; +all ur lines are mos proper 2 boot #RealTalk #LovingTheVideos

[@RustyGraffitiReviews]

Soon as you said you never tried it I was like “oh he’s gonna love the lvl1 good job brother! Suuuuuuub-scribed

[@codefiveart]

You were right! I did love it. I bought the sampler for the Montana levels 1-6 and I’m going to try those out soon too

[@RustyGraffitiReviews]

@@codefiveart yeah man they all got their own personality’s that are good and bad for certain things. But out of that same sampler pack the lvl 1’s are the ones I got a 50 pack of after!

[@codefiveart]

@@RustyGraffitiReviews DUDE me too! Hahaha. After that video, I got another order from art primo and got the 50 pack

[@RustyGraffitiReviews]

@@codefiveart that’s funny

[@clintatk]

I'm a studio artist and Level 1s are great for canvas work. Btw, have you seen what they want for the Mosquito Cap!? 😐

[@codefiveart]

Haha. I haven’t mastered the mosquito cap yet. I think on that level new tools are needed. However you can do some cool effects with the needle!

[@johnO21]

So ..Grey Dot is noway similar to the Level 6 Ultra Wide Fat Cap??

[@codefiveart]

Hahaha. I should revisit this kind of content. It seems to be popular

[@johnO21]

@@codefiveart 😆 Artprimo was off its game today😁

[@codefiveart]

@@johnO21 oh is that what it’s sayin?? I’ve had just an “okay” experience with artprimo

[@johnO21]

@@codefiveart ...artprimo been very accommodating in the past. Today my very 1st doubts(must be the shortage in materials kuz covid, nobody wants to work)

[@bohaggin5913]

I love your other channel “car audio fabrication” might be your twin brother

[@codefiveart]

Hahaha. I can kinda see it! Super funny

[@JS93art]

Nice review man! Hopefully I can do some spray art in the future soon 😁 I’ll take these tips into consideration. Also are you from Colorado?! Beautiful state, been loving it ever since I decided to move out here :)

[@codefiveart]

Nice! Yeah, I’m exploring the tools of the spraying trade and wanted to document. There is a lot of choices out there

[@gerardozambrano4863]

A couple months ago i had thought I found a skinnier cap in the Skinny pro black w/grey dot but Nope montana level 1 is definitely it.

[@codefiveart]

It’s so good. This video does so well I should reboot it

[@TURK_182]

We have a clear winner, cleaner lines, better flairs too

[@codefiveart]

Yeah dude. I plan on buying a bucket of these

[@createnotdestroy3099]

You should be using the white cap black dot. That grey dot cap is a soft cap and doesn't compare to the green cap. Also a good way of getting straight lines is to hold the can sideways.

[@codefiveart]

Thanks dude! I appreciate the feedback!

[@createnotdestroy3099]

@@codefiveart no problem. maybe worth doing an other review Black dot Vs Montana Level 1?

[@codefiveart]

Absolutely. That’s a good idea. I’m building a new wall so I should do it soon

[@createnotdestroy3099]

@@codefiveart Awesome. Cant wait to see your wall. Great way to keep practicing.

[@drewmckdotcom]

Tough to compete with big sky country

[@codefiveart]

hahaha, they know what they are doing apparently

[@ilmaticgomezLA]

I kill it with L1and L3

[@codefiveart]

Yeah dude. Nice

[@eks_graffiti_art]

More accuracy with the level 1 man

[@codefiveart]

I’m a convert. I bought 50 caps after doing this

[@eks_graffiti_art]

@@codefiveart I get the cream coloured level 1s

[@codefiveart]

I have to give those another shot. My can control has gotten better and before I did terribly with those

[@dawsonh3826]

U don't even look like the type to do graffiti and tag but damn your pretty good at it everyone's needs somewhere to start and it takes time to get better at tags I'm not calling u toy or stuff practice my friend they say graffiti is dying that's bs there were over 2,000 different cases of graffiti this year so yeah man i suggest practicing it takes a while but u got it

[@codefiveart]

Yo thanks man. I love the positivity! I need to get back out to the wall again. Life keeps me busy and I need more time for painting!

[@dawsonh3826]

@@codefiveart totally man stay good you got this I got you man have a good one thanks a ton and watching peoples videos like yours can become widely viewed one day

[@civilian0005]

So-fulls? SOFLES is SOFE-LESS isn’t it? 😂

[@codefiveart]

Haha. I guess I don’t know! I would think there would be two S if it was sofe-less. I also have heard Profets pronounce it “SAH-FELS”. And he actually knows him so… I’m pretty sure I have always said it wrong. Haha 😂

[@brandonvolk8669]

Couldn't watch after the first 3 scrapes, toy

[@codefiveart]

Oh poor Brandon, I’m sorry. It’s quite possible my channel isn’t for you.