Delboy's Garage, Fighter Build

First layer of clay over the frame, then i can start sculpting.
Patron Support:- / delboysgarage
Our channel is supported and part funded by kind and generous Patrons who help keep the bills paid and keep the videos coming. If you've been helped, educated or just entertained by our videos then you can join the gang by clicking the link above, and from just $1 a month, you'll help us keep the videos coming. Patreon :- / delboysgarage
Or If you just want to say thanks for this video alone, you can drop a dollar in our "Tip Cup' by using Paypal to [e-mail] The money will go to make more videos and keep this channel in your hands and not the advertisers.
Buy 'Delboy's Garage' Merchandise:-
stores.clothes2...
Wiha Tools available from RECON Electrical :-
www.reconelect...
Follow us on Facebook :-
/ delboysgarage
Check us out on Twitter :-
/ delboysgarage
..and if you haven't already, then please subscribe :-
/ moonfleet41
Become a Patron and join the team :-
www.patreon.co...

[@andydawson2070]

Morning Dell well I think you have made a great start to the tail unit, I could sence a slight hesitation just before you laid the first piece of clay but we'll done for your courage. Looking forward to seeing it come together. I realize this is an afterthought but my wife, who works with plaster (in hospital) made the suggestion that if you were to do something like this again, to try plaster of Paris bandage to make the first layer, allowing you to sculpt the shape more without the hassle of pushing the clay through the wire, then with the plaster dry you could build up the shape sooner and with less weight from the clay. Maybe for a future project? Anyway, looking forward to seeing the next installment.

[@Moonfleet41]

Hi Andy, it's an amazing idea and would be the best way to make a solid layer, some also said expanding foam underneath, and even cling film over the mesh... but as I'm a couple of videos ahead, then today I got started on the fibre glass, which meant fine tuning the clay shape... amd a really handy by-product of the mesh and clay was that I can still push the clay through the mesh, I soaked the whole thing for a few days under wet rags and plastic, to keep the clay soft... and in the final shaping was able to massge it to perfect symmetry, which I wouldn't have been able to do if I'd made a solid base layer, I'd have had to shape it by carving, which is less accurate with so many round surfaces... so much as it was difficult to get the first layer on, it was handy at the end ! Thanks for watching mate, learning as I go, but for a future project, I will bear your wife's idea in mind as it's a trick too good not to use - cheers !

[@edwardleniston1076]

“O” level pottery, did that as well. A skill you never lose. Looking forward to the next episode.

[@Moonfleet41]

Too right Ed, happiest school days next to metalwork ! Catcha soon , D&Px

[@jimb1783]

I'm looking forward to seeing this finished.

[@thehexter1]

Man, that’s pretty neat. And if it doesn’t work out well, you’ve gotten a lot of experience rolling out the clay. Could get you a job making tortillas in a Mexican restaurant! 😄

[@MrBuzzybear]

Hiya del , just a thought ..could you have used a cling film cover over the mesh to stop the clay from going thru ...?

[@Moonfleet41]

Hi Kev, could have done mate, that's common sense, but actually it's worked out to my advantage - I film a couple of videos ahead, so today I filmed the final shaping and the first layers of fibre glass, what was really great was actually being able to massage the bumps down on the clay by wetting the surface so it's slippy, then gently massage the bumps away, which pushes the clay through the mesh, so in the end (and it was unplanned!) it turned out better to leave the mesh open... learning as I go, every day's a school day !

[@petervaughan4591]

I thought I was watching a baking show with you rolling out pastry😂😂..interesting to see how this turns out! Good work as always.

[@Moonfleet41]

haha I'll write to Paul Hollywood and see what he thinks lol - thanks for your support mate...

[@raytokens2291]

You tube is great bruv. I no longer use normal Tele, if you can call it that. What a great thing this video was. You are learning while filming that makes for great content bruv. It's real reality tv. It looks like it's going ok the shape in nice it's a bit of old school muscle bike look just a bit shorter, I like it. Given me some ideas too. Now I've seen it done I will attempt it my self now I've been thinking about using a made mould for a while now. I may try it with oasis foam that you use trot flowers. When it's dry it cuts and when it wet it moulds. Thanks for the inspiration bruv I'm gonna give it a go to make a belly pan for the fizzer. Take care and ride safe bruvva. Say hello to the pitstop miester from me and the family. The channel needs her bubblyness back, she seems to really enjoy doing it and it brings a presence of silliness and fun. Not that it isnt a great channel already👍🤘🤘. Just a thpught bruvva😁😁😁

[@Moonfleet41]

Ayup Ray, thanks for your kind words... I love the oasis option, I've had some great ones over this last week or so... plaster bandage (for broken arms etc!) was the most ingenious... in the end (I'm always filming a couple of videos ahead) having the mesh open with soft clay I was able to massage it through the mesh where I needed to to fine tune the shape and get it dead symmetrical... like you said, learning as I go, never done it before, and it's so much fun...! Penny's always here buddy, she plays a huge part with post-production, couldn't produce three videos a week without her... you know why she's been absent, there's always someone who spoils it for everyone else .... take care brother, catcha soon, D&Px

[@reeno91]

I've found the clay working oddly satisfying to watch. The tail looks really good although for me it's a little bit to sharp on the top.

[@Moonfleet41]

Cheers buddy, it was a lot of fun to massage it in to the final shape and I lifted the tail at the rear to match the top line of the tank, remember it's up on a paddock stand, so the rear will drop an inch, or so, when it's on it's wheels... it should sit level when viewed from the side... I don't want a caff racer look, as it's a streetfighter.. just the basic structure first, I can modify it once the basics made !

[@CookingwithChefDai]

Wow, that must require a lot of patience and contingency. Well done Del, I’m learning so much from this tail end. I’m on tenterhooks and can’t wait to see the finished product. Hopefully you and the Penstar are enjoying this glorious sunshine of late. All the best pal!

[@Moonfleet41]

Ayup Dai, good to hear from you brother... am a couple of videos ahead and have about 3.5hrs of footage to edit, but it's in fibre glass now, and am finally relieved that it's come out straight and square at least ! Still a long way to go but making progress and loving every minute of it.... finally some riding weather, and work permitting, maybe we should nail down a plan for that ride, at least in pencil... over the next couple of months or so, what d'ya say?! Have a great weekend, chat soon buddy, love to the family... D&Px

[@CookingwithChefDai]

Moonfleet41 in fibre glass now aye?!?!? How awesome is that. Can’t wait to see that!!!!! I rode up to Buckinghamshire this afternoon on the RSV4, glorious sunshine on the way up and pissing it down on the way back. Oh well, the sunshine was nice while it lasted lol. 💯 % up for that ride, just say when and I’ll be there! Might be going up to mackiebass’ meet up next month too, if you’re up for it.

[@davekendrick7231]

Great job del, it looks like you intend keeping the bike making the seat your size. I was taken back as I thought you were to sell it to raise funds for the next build, I would never get my big ass in that small space.

[@Moonfleet41]

Ha ha.. well i may well not be able to part with it after wat could be well over 600 hours work and commitment.. there is still the XJR Turbo to sell for the next donor bike... and having been riding it for a few days lately...it could be a good idea, im gonna get myself on soooo much trouble with that thing.. its just sooo quick, the acceleration is addictive.. still got lots to do yet, so plenty of time to decide.. Thanks dave, have a good weekend mate... Del.

[@bonnie-voyage1005]

Good Job, Del, taking shape

[@davidingram792]

Who needs youbtube Del? We got you! :-)

[@Moonfleet41]

haha poor you David lol !

[@veeken777]

Minor imperfections will get covered by the resin. Glassing is great fun.

[@Moonfleet41]

Thanks buddy, am new to this, done a bit in the past, but never a full on entire body panel... so learning as I go, and having so much fun !

[@rsbharley4766]

Nice work Del , for your first attempt it's looking bloody good mate. Penny and you have a great weekend. Cheers

[@Moonfleet41]

Thanks buddy, just having a go, am nervous till I get that first layer of fibre glass on... have great family weekend my friend, D&Px

[@madmarkuk1]

Another great job Del. Brillient idea

[@Moonfleet41]

Cheers Mark, good to hear from you always my friend ...

[@kevinharhat2687]

Looking good del will be a big weight saving idea

[@Moonfleet41]

Thanks Kevin, I think that's a great side effect over a steel panel, but it's gonna be messy and a lot of work, but hey I'm up for it lol

[@suzukietc1373]

I tried making a plus using celotex foam and masking tape. Worked surprisingly well but never thought if doing it this way. Next time I attempt it I'll try this way. Looks interesting for curves as the unit I tried was a flat tracker style seat so was all flat and sharp

[@Moonfleet41]

Sure thing buddy, I've had some amazing suggestions through this, expanding foam, pre-cast foam, oasis (the flower stuff!), and even paper maiche... all would work great, just different ways to do it...! The great thing with the clay is that once it's all loaded up and in shape, you can muscle it about and fine tune the shape and symmetry by massaging the bumps around...!

[@stevenesq]

Well done dell love the work in progress , you should get channel of the year lol.

[@Moonfleet41]

Hi Steven, thank you so much for your kind words, you are too generous... the channel takes all of our spare time and then some ! It's a labour of love though, and great feedback, like yours, makes it all worthwhile !

[@springy-2112]

Lionel will be proud !! ☮❤

[@Moonfleet41]

"Hello.... is it me you're talking to? Can I hear it in your eyes and can I see it in your ears?...."

[@jmichaelsed]

Once made an ashtray out of clay... but don't think that helps much in this situation ;) Keep up the great work Del!

[@Moonfleet41]

That's cool mate, at least, I guess, if this turns out rubbish, I'll have a second use for it lol

[@craigfell6906]

Prefer this back end, looks more interesting to do too.. Watching & learning, All the best.

[@Moonfleet41]

Thanks Craig, am learning too, never done this before, but it's so much fun, am glad I decided to give it a try !

[@royking1]

Erm, doesn't that back section look a bit phallic from the top? 🤔😂

[@Moonfleet41]

...only if your willy is pointed !

[@edwardleniston1076]

Moonfleet41 🤣

[@garya3056]

Nice progress, Del. Am following this process closely and learning lots from you. Hope Penny doesn’t notice her facial mask jar is getting low! Regards from HK today to both of you. 🏍👍🏍

[@Moonfleet41]

Thanks Gary, very kind fo you - and you must be enjoying your trip, have fun! D&Px

[@BIG-K]

Your pie-making skills put to good use at last, Del. This is really good viewing and, as in all the best TV series, you've left us hanging, eagerly awaiting the next steps. Great stuff 👍 [..... Venus de Fighter? 🤔]

[@Moonfleet41]

Ayup Keith, thanks buddy... yep, Paul Hollywood would be proud aye, not to mention Mary Berry...! It's a fun project, am a couple of videos ahead, so have started the lamination now, and trust me, it gets better, if I say so myself lol... thanks for watching my friend, much appreciated!

[@MrAlmar07]

Nice one Del. 'O grade Pottery',Hah. Everyday is a school day eh & clay is a great medium to work with. 'See' you tomorrow mate, Awrabest, Al. 😉👍

[@Moonfleet41]

Thanks Al, always good to know you're watching, hope the new arrival is doing fine! Hi to Archie too!

[@MrAlmar07]

Moonfleet41 Always mate, & with the kids informing me of a new video, I can't miss any. The 'Wee one' is settling in fine, thanks.

[@BRUM9922]

very nice del, now remember to add Guinness cook at 180c or if u have a fan assit oven 160c for about 55mins then Enjoy. i like mine with a thick crust :). Ride safe

[@eaglestrikes1]

Great job

[@david555montez9]

Very creative 😉

[@Steve--RR666]

Lookin well Del

[@8ball903]

Excellent, can I have a ash tray made with any left overs 😂👊 looks cool

[@Moonfleet41]

If it all turns to crap mate, it's big enough to make a bin out of, so it's yours mate !

[@8ball903]

Moonfleet41 'faith dell,' it's going to turn out cool, just the process is interesting to watch , nice one

[@wknight1983]

Reminded me of cake decorating... looks good though del 👍

[@Moonfleet41]

Thanks Wayne, learning as I go, never done it before!

[@bertzx9r894]

Can't give you any advice mate but I'm dead excited to see how this comes out. The bike took a massive change in direction but definiyemy for the better.

[@Moonfleet41]

Cheers Bert, thank you my friend, I just fancied taking on something new I've never done before, how hard can it be?! lol

[@Neils400]

kinda reminds me of the Foggy Petronas FP1 tail unit.

[@Moonfleet41]

Thanks buddy, that's a great honour, it wasn't intended, but I guess the shape ends up familiar design to all of us, kinda GSXR1000 as well, am not sure I'll paint it that colour green though lol !

[@scottsabin2245]

Looking good del could you have not paper mache it as well to get the shape

[@mrdarn]

You beat me to it. I've not done anything like this before but either that, or the t-shirt trick he did last time would make a great base for the clay. 20-20 hindsight eh?

[@HalfdeadRider]

There is a reason car designers use clay, it's much better for sculpting precisely. This way he will also not have the risk of it slipping, it will grip much better to the mesh.

[@scottsabin2245]

Halfdead Rider thanks for that need doing anything like this that y I thought it would make it better

[@Moonfleet41]

Thank guys, great suggestions, I chose the clay cos I know I would never have made it symmetrical first time and as you'll see in the next couple of videos, once the clay is all loaded on, I get a chance to muscle it about and get the shape perfect... always more than one way to skin a cat aye?!

[@archiemelton9777]

Is this a ZX7r? I got a '97 gonna be a project bike when I get a new one

[@Moonfleet41]

Yes mate, its a P4 model.. Good luck with yours.. have fun.. Del.

[@bobgwinn5091]

cool

[@petefroud5308]

[p] DB like this . Just silly question if you kept the the clay damp would it be easier to mould it with the second layer.

[@Moonfleet41]

Hi Pete, you read it right, it's useless letting it dry out, this cracked up badly over two days, so I put a second layer on and thickened it right up for Weds video, and I covered it in tissue and rags, wetted it down and wrapped it in a bin liner ready for today's filming, and it came out soft and 'mush-able' ! ... so I could muscle it in the shape I wanted... wish me luck !

[@tinks43]

(P) Looks nice & therapeutic 👍🏻

[@Moonfleet41]

Sure thing buddy, started laminating today, 3.5hrs footage to edit over the week, but will throw up an advance photo on Patreon later this evening !

[@softailfun]

My only comment buddy is that if you sell this on, your market will be limited to the erm...... more slender shaped customer! My ass would never fit in that saddle 😂.

[@Moonfleet41]

haha I see it as an incentive for myself to lay off the doughnuts and the Premier Inn breakfasts lol

[@softailfun]

Moonfleet41 See you soon fella. Breakfast and Harley's, does it get any better??!😂

[@hsmith3844]

I had an idea, don't know if you thought of it. Bondo, the stuff body guys use to fill low spots on sheetmetal. You sand and shape it and sand it as you like. Just a thought........ Great job

[@Moonfleet41]

Cheers buddy, I shall be using that for he fine tuning of the finished tail, I think they call it bondo in the States, gob in Australia, and here I guess it's just filler, or P38 if you're old enough to remember it (!) - all the same stuff aye?! Thanks for watching mate, much appreciated !

[@ccpitbull]

There is a better way. Good try though. Have a look at my vids. I can send you some info if you want.