Articulated Toa Mata Build Tutorial (Lego BIONICLE)

  Рет қаралды 39,512

MootroidXproductions

MootroidXproductions

Күн бұрын

Пікірлер
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
UPDATE: 1) PARTS LIST IS NOW IN THE DESCRIPTIONS 2) I've been saying it wrong this whole time. It's actually PTFE, not PFTE. 3) PTFE/Teflon is actually very stable and safe! It's even less toxic than, say, the microplastics we ingest daily. Its toxicity only arises when it's broken down; this only occurring at high temperatures (generally above 500 degrees fahrenheit) and during some sliding conditions. from Lalam: "PFPE and PTFE are the most common fluorinated lubricants, and are generally regarded as some of the safest lubricants. They are used in the aerospace industry for their remarkable stability, but this stability comes at a cost. When broken down, fluorine can bond with other atoms and molecules to create particularly harmful substances. While PFPE and PTFE are stable against UV and oxygen, under tribological forces, the polymer chains can sever. PFPE, in particular, has been shown to develop a lewis acid (with iron) under very extreme tribological conditions, according to NASA. I'm not aware of any studies showing reactions under ambient tribological conditions, but polymer liquids and solids can still undergo chain scission under very mundane circumstances. This can include within a plastic joint. I'm aware that, while repeatedly and vigorously moving a POM part on another POM part back and forth, with PTFE powder coating it, that at some point it stick slips and eats away at the plastic. This at a significantly higher rate than unlubricated POM on POM parts. I don't know what is being generated in these conditions, but it appears to be short lived, and I don't believe this would happen under normal use."
@Averynormalchickennugget
@Averynormalchickennugget 6 ай бұрын
Yapping
@WorstHour
@WorstHour 5 ай бұрын
Can you make a parts list?
@kumastansloona9822
@kumastansloona9822 4 ай бұрын
@@WorstHour i made a (mostly comprehensive) list of parts for lewa on bricklink! idk how to share it tho
@WorstHour
@WorstHour 4 ай бұрын
@@kumastansloona9822 THANK YOU, if you post it as a creation I think I will be able to track it down
@kumastansloona9822
@kumastansloona9822 4 ай бұрын
@@WorstHour doesnt work unfortunatey.... maybe i could email it to you?
@Herobuilder21
@Herobuilder21 7 ай бұрын
your rant about lego's current buildable figures feels deeply validating as someone whose made this complaint only to be met with a "yeah you've talked about this before" and nothing more from people who have no clue what i'm talking about.
@BioCreatorZ
@BioCreatorZ 7 ай бұрын
"We collect toys, not investments" So based... so peak
@chris_wizzudz
@chris_wizzudz 7 ай бұрын
Mootroid: "This year, I lost my dear friend Eljay!" Eljay: "Quit telling everyone I'm dead!" Mootroid: "Sometimes I can still hear his voice!" 😭
@Bionicdodo24
@Bionicdodo24 7 ай бұрын
Man rip Eljay he will be remembered 😢
@Bionickpunk
@Bionickpunk 6 ай бұрын
Rip Mangosteen guy.
@LakeParkerYT
@LakeParkerYT 7 ай бұрын
What an incredible video, I'm always so impressed with your pacing and the consistently quality jokes that had me laughing the entire time. Not only that, but the actual builds of these Mata revamps are amazing! They honor the original aesthetics and scale almost 1:1, and the poses you can get them in are so expressive and dynamic. They seem so sturdy too, which is generally my biggest issue with a lot of Mata revamps. Fantastic work as always Charlie!
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
you are so kind. thank you so much for validating my efforts.
@purplehaze2358
@purplehaze2358 7 ай бұрын
"Time to do what Tahu always wanted to, and take an intimate look at Kopaka's tlts" "Now grab a 2 by 4 downward bracket. Uh, there's some red gunk on this one too." Seems like Tahu did take a good look in there, and he left some evidence behind.
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
ah dammit i meant 2x2 bracket :(
@WombatCombatPictures
@WombatCombatPictures 7 ай бұрын
Ah yes, Eljay. The Linus Tech Tips of the Bionicle Community. He will be greatly missed, RIP.
@realathenightmaren4393
@realathenightmaren4393 Ай бұрын
Wait hold up what did happen to Eljay?
@yuxaredd
@yuxaredd 7 ай бұрын
1:58 I want it known that recording this mech required me to put a mobile phone tripod on my face like a headcrab and trying to get even these shots was agonising that punch was with the rage of someone who had to do that recording 5 times over
@NoTheRobot
@NoTheRobot 7 ай бұрын
This video is a banger. Wish I had the pieces on hand to try this build but I’m here for articulated builds for animation purposes😁🤘 Congrats dude!
@Natnaaaaaat
@Natnaaaaaat 7 ай бұрын
That eagle scream left me deaf and blind
@Garmagic2yFhenrakh9
@Garmagic2yFhenrakh9 7 ай бұрын
42:48 _"So now put his back back on his back"_ This is why English is my favorite language 😂
@TopengProductions
@TopengProductions 7 ай бұрын
5:14 oh that's gore. That's gore of my comfort character
@funnyfoxbiome
@funnyfoxbiome 7 ай бұрын
Lego does actually make red studpins now, they're listed separately as they have added friction. The frictionless ones have also appeared in white. Also no Roodaka's species does not have dimorphism, the one guy they made green in the comic isn't even really green
@oboeshoesgames
@oboeshoesgames 7 ай бұрын
Fantastic video and fantastic builds
@anzullic
@anzullic 7 ай бұрын
Oh yeah, and BRING THE BIONICLE AND CCBS PIECES TO PICK A BRICK! END THE FINITE OF BIONICLE PARTS!
@legorocketraccoon8297
@legorocketraccoon8297 7 ай бұрын
Pretty hard to do that if the parts aren't made anymore and the molds have been destroyed.
@anzullic
@anzullic 7 ай бұрын
​@@legorocketraccoon8297 We're talking about the company who literally made the parts. It's like asking Coca-Cola why there is no Cola anymore "Sadly production of the Coca-Cola beverage has stopped" - "My guy, YOU'RE the production" Even If the molds are destroyed, Lego can make new ones with improvements to reduce parts breaking. "But making a new mold costs a lot of money!" - Lego isn't a small company, and they're already cutting many corners, especially with the display sets. Lego could incrementally add the molds to pick a brick and set a high selling price to get the money back for the mold. I don't know how it looks like with the copyright, but I hope independent companies legally take a stab at making bionicle parts.
@fernandaps2
@fernandaps2 7 ай бұрын
I like the casual police disrespect
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
the vahki must be abolished
@chris_wizzudz
@chris_wizzudz 7 ай бұрын
@@mootroidXproductions #AVAB (All Vahki are Bionicles)
@EduardoGama-rs5ixokikkis
@EduardoGama-rs5ixokikkis Ай бұрын
Rapper come toys
@EduardoGama-rs5ixokikkis
@EduardoGama-rs5ixokikkis Ай бұрын
San antonio kids
@EduardoGama-rs5ixokikkis
@EduardoGama-rs5ixokikkis Ай бұрын
Frost boy with the same thing for levittaon
@CharliRoberson
@CharliRoberson 6 ай бұрын
Some people watch this for methods to have highly articulate Toa Mata. Meanwhile I watch it for the hilarious context.
@OrbitalSnapshots2455
@OrbitalSnapshots2455 7 ай бұрын
I don't even have any Bionicle. But I love watching your videos.
@nefariousgremlin7554
@nefariousgremlin7554 7 ай бұрын
No bionicle tutorial is complete without a healthy amount of existential dread
@anzullic
@anzullic 7 ай бұрын
Legends of Metru Mui is definitely my favorite movie. I think I had the most fun with the Toa Inika and my favorite Toa designs has to be hands down the G2 CCBS Toa.
@WyattCreel-wc5wf
@WyattCreel-wc5wf 7 ай бұрын
I love this video All the comedy makes it so much more enjoyable to watch compared to other people's videos And the time it probably took to film this too
@misterbiscuit3706
@misterbiscuit3706 7 ай бұрын
Never did I think I would come across a video with a tutorial for some of the best mata Mocs with fun comedy, robot shipping, casual comments about political issues, with Leon simping, and insane gaslighting. Legitimate peak content.
@TakeraYT
@TakeraYT 19 күн бұрын
bruh ur editing style/humor has me crying im only 8 minutes in LMFAO
@mootroidXproductions
@mootroidXproductions 18 күн бұрын
thank you So much that means a lot
@sapphire-gems
@sapphire-gems 7 ай бұрын
13:28 is probably my favorite sentence ever
@MidKnightNyran
@MidKnightNyran 7 ай бұрын
I skew towards 'bar' for mata, but ofc I've said it both ways before I think Kopaka *does* live in Tahu's head rent free, but Kopaka himself is just a Genuine Hater, since he judges literally everyone, up to and including Gali and Pohatu. Nice on the raw footage. I appreciate your efforts, and do not take the amount of work that went into this video lightly You gotta respect the Toa Metru for abolishing the police both during their stay on the Isle of Mata-Nui, and upon their return to Metru-Nui one thousand years later Maybe the real Eljay was the friends we made along the way. Excellent video, I really love your presentation, as always, and I look forward to aping the frame for personal use at some point in the semi-near future!
@PlasticToa
@PlasticToa 6 ай бұрын
random notes I think of as I watch because my impulse to nitpick is too strong I should probably add timestamps but I'm lazy -The axle-mixel joint connector actually exists in dark tan (albeit only in one H^rry P^tter set, but you can get them from pick a brick. Also they came out in black in a technic set from 30 years ago.) LEGO is generally more eager to recolor the mixel/towballs, it's just the sockets that they're stingy about. -While I do like them aesthetically as well I'm pretty sure the pins on pohatu's legs are just there to facilitate the combiner model -The brown parts didn't fade with age, LEGO actually replaced their main brown color entirely at some point in the 2000s. -you mixed old and new greys on onua's legs and for that I'm going to have to steal your kneecaps -oh also all vortixx look the same as roodaka regardless of gender
@Bionickpunk
@Bionickpunk 7 ай бұрын
Man...Matau is so cool for permanently unaliving that cop.
@purplehaze2358
@purplehaze2358 7 ай бұрын
I was not expecting a Tahu X Kopaka ship going into this, but I will unironically give a read to anyone who writes a fanfic about that.
@morganweinstock167
@morganweinstock167 7 ай бұрын
I’m the 420th like and that somehow feels both deeply wrong and strangely fitting. Excellent tutorial btw, very clear and concise without ever feeling clinical. You should be proud!
@hugo-xg9qb
@hugo-xg9qb 7 ай бұрын
I've waited this video for SO LONG
@purplehaze2358
@purplehaze2358 7 ай бұрын
The world would be a significantly better place overall if LEGO released 1L and 2L stud axles.
@Bionickpunk
@Bionickpunk 7 ай бұрын
Same with 1L pin with a stud end.
@BMInstructions
@BMInstructions 7 ай бұрын
The ending. seeing you meeting his twin. super cool.
@LemonyLepid
@LemonyLepid 7 ай бұрын
ty for the shoutout at 2:25 lol I really would like to see them come out in some way but idk how the hell I'd even give something like that to anyone
@LemonyLepid
@LemonyLepid 7 ай бұрын
fucking RIP eljay lol
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
your designs are the greatest and i think about them at least once a week
@danieldolhai5388
@danieldolhai5388 7 ай бұрын
Lego pls hire this person and restore the BIONICLE's glory 🙏
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
manifesting this
@RedatorHarp
@RedatorHarp 7 ай бұрын
Lalam24 is the same dude who inspired me to make my own!
@dankmotionsstudios5161
@dankmotionsstudios5161 7 ай бұрын
Im going to sneak into your basement and steal all your bionicles
@PM-oc7iu
@PM-oc7iu 6 ай бұрын
Please PLEASE post your moc portfolio somewhere, these are the best revamps I've ever seen
@mootroidXproductions
@mootroidXproductions 6 ай бұрын
i have a backlog on my instagram, but i don't have a dedicated profile for it or anything. maybe i should do that.
@PM-oc7iu
@PM-oc7iu 6 ай бұрын
@mootroidXproductions don't have insta but yeah a dedicated moc page would be epic
@kori7438
@kori7438 7 ай бұрын
Everything in this is just so great, builds is so neat and everything else too !
@quote6013
@quote6013 6 ай бұрын
As someone who tried to remake these guys (and got pretty close) from just screenshots, I KNEW you had to have cut some parts! I wasn't crazy!!
@wesphillips7806
@wesphillips7806 7 ай бұрын
This is my current favorite video of all time
@portalpuppy31
@portalpuppy31 6 ай бұрын
3:29 Lewa swings his axe **cartoon sounds intensify**
@cowboybarbaryn1302
@cowboybarbaryn1302 7 ай бұрын
RIP Eljay
@spacefanproductions6254
@spacefanproductions6254 7 ай бұрын
I'm a bit late to the party, but this video is great. Shows some great building techniques and tricks but it doesn't end up being boring at any point in spite of its length because it is frequently spiced up with humourous bits (also known as jokes idk why i wrote such a long paragraph just to say "haha it funny").
@warlandgamesandart
@warlandgamesandart 7 ай бұрын
Can't believe MootroidX got killed by the Krahka
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
honestly she was cool as hell and i wish she’d lived
@MidKnightNyran
@MidKnightNyran 7 ай бұрын
@@mootroidXproductions She did! Krahka and Tahtorak are sucked into the field of shadows whilst fighting the Zivon, but emerge on Voya-Nui a thousand years later, after Brutaka opens a dimensional gateway with the intention of sending Axonn to that accursed place He fails, but after the two combatants are gone, and the portal remains, Tahtorak and Krahka emerge from it. Then they fight Kardas for a bit. Eventually she makes her way back to her old den in Metru-Nui, and she cameos in Takanuva's Blog during the Reign of Shadows portion of the serial
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
@@MidKnightNyran OMG I DIDN'T KNOW THAT does that happen in the legends books or an online serial or what
@MidKnightNyran
@MidKnightNyran 7 ай бұрын
@@mootroidXproductions The pair reappear near the end of Legends 5: Inferno, after Axonn and Brutaka's last major battle in that book Krahka makes her way back to Metru-Nui offscreen, but has the aformentioned cameo in Metru-Nui in the Takanuva's Blog serial, during it's 09 run
@NixiShavalMusic
@NixiShavalMusic 7 ай бұрын
Thank you for replying to me about this. These are lovely
@bagea
@bagea 7 ай бұрын
*puts an axle in a hole* everything reminds me of him...
@theterminalstupidityvariet1629
@theterminalstupidityvariet1629 7 ай бұрын
We learning the secret articulation tech with this one!!!! 🔥🔥🔥🗣️🗣️🗣️
@lurme4089
@lurme4089 7 ай бұрын
THIS PELVIS IS FIRE🗣️🗣️📢📢❗❗❗
@theMilkproductMk2
@theMilkproductMk2 7 ай бұрын
I felt like I knew what I was getting myself into after the first build tutorial... then I got to the end of this one and I don't know what to feel... 10/10 real cool stuff, cant wait to build my goat potato
@Technochaos03
@Technochaos03 7 ай бұрын
really grateful you uploaded this before I tried to reverse engineer the builds from still frames of your other videos
@huyphan7825
@huyphan7825 4 ай бұрын
I love that the energy of this tutorial is just: Step 1: Let's make articulated Toa. Step 2: ???? Step 3: Profit
@kanaewing7524
@kanaewing7524 7 ай бұрын
I am never letting go of the phrase "With error, comes clarity" until the day I die.
@MatejBeranek
@MatejBeranek 7 ай бұрын
honestly. amazing video!
@ActionJacksonVideos
@ActionJacksonVideos 7 ай бұрын
>”this is Teflon powder. I’m pretty sure it’s nontoxic.” UHHHHH > *ten seconds later* “so this stuff is definitely toxic and it says do not touch it to your skin” At least you properly warned us. I also very appreciate that the eagle sound (and the ass) is so loud that it actually simulates my hearing returning from a flashbang by ramping the audio back up to full volume after a few seconds. Seriously though, this is a wonderful video. I love your editing style and getting a 45 minute video is a treat that I will not take for granted.
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
ok i talked to my chemistry buddy and it’s only toxic if it is heated to like 500f and otherwise it is very stable.
@ActionJacksonVideos
@ActionJacksonVideos 7 ай бұрын
@@mootroidXproductions thank goodness. Someone came into my hardware store job a few years ago asking what type of sandpaper they would need to sand the Teflon out of their cooking pan. I landed on “don’t do that” because I had it in my mind that particlizing Teflon would put it in the guys lungs and that would be Bad. Also need to heap on praise for the continued mindfulness of the current climate in the real world and how fiction reflects on those realities instead of hides from them, and also for what I would consider peak filmmaking in the last 40 seconds of the video. The timing, the perfect cuts between you and a ghost, the cliffhanger ending, the knowledge you didn’t wear pants to the door, I tried to do stuff like that all four years of film school and didn’t even come close.
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
@@ActionJacksonVideos holy heck that means so much i put a lot of effort into editing what amounts to a few dozen takes shot on an ancient iphone
@klaidikamberi786
@klaidikamberi786 7 ай бұрын
Eljay cameo, always appreciated.
@Valdyr_Hrafn
@Valdyr_Hrafn 6 ай бұрын
rewatching this in honor of pridemonth
@mootroidXproductions
@mootroidXproductions 6 ай бұрын
@87583
@87583 7 ай бұрын
Everything I’ve been wanting in one place: a tutorial on the Toa Mata, but better
@synnova32
@synnova32 6 ай бұрын
ITS BEEN A HOT MINUTE SINCE THAT MASKPOSTING INCIDENT WAS MENTIONED sheesh. Legs, man
@micheal4526
@micheal4526 7 ай бұрын
Since you use mega parts, let me mention you can buy parts from Mattel through their customer support service, the form has an option for “missing pieces” where you can just say it’s a set that included that part and buy the piece as a replacement
@WorstHour
@WorstHour 2 ай бұрын
B-b-but the Lego bonkle g3 mini from lemony won’t be big enough sets, _waaaaah_ -Lego
@ber-eddie
@ber-eddie 7 ай бұрын
This is a good moc ngl
@leflstopmotion
@leflstopmotion 7 ай бұрын
perfect for stop motion! Great ideas! Thanks.
@CLIDgeneral1
@CLIDgeneral1 3 ай бұрын
0:38 my mind when I saw the box: GIVE ME IT ALLL NOW!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@nickpatrie7668
@nickpatrie7668 6 ай бұрын
I completely agree that toys should be played with, no matter the franchise or company. If you’re not going to play with the toy, why buy it in the first place? I’m a huge fan of Bionicle and My Little Pony, I have a little fanatic about a Matoran who fell through a portal and ended up on the pony planet.
@sideways198
@sideways198 7 ай бұрын
Our prideful elite put their life's on the line every day for the citizens of Metru nui and this is the thanks they get? smh, absolutely disgusting. #Vahkilivesmatter #TuragaDume2024
@SteezyCollector
@SteezyCollector 7 ай бұрын
OG's remember the maskposting leg meme
@oatmealraisincookiesaregar2548
@oatmealraisincookiesaregar2548 2 ай бұрын
came for bionicle stayed for the social commentary
@atlas16198
@atlas16198 4 ай бұрын
People saying to keep politics out of Bionicle when the metru nui arc had those insane propaganda flash animations
@krishacz
@krishacz 7 ай бұрын
eljay lore???????
@Luigiboy83-zh6wf
@Luigiboy83-zh6wf 6 ай бұрын
Mat Pat, we call upon you!!!
@nuxbronson
@nuxbronson 7 ай бұрын
i like your flower pants
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
thank you i found them in the women’s section of goodwill
@purplehaze2358
@purplehaze2358 7 ай бұрын
Why does the audio always quiet down, only to fade back in whenever there's an eagle screech in this?
@micheal4526
@micheal4526 7 ай бұрын
I hope they bring back mask collecting in G3 but they do it in a way that also brings back matoran, where you get one of 6 matoran (no mask, one of each element) and 2 masks, one of which can go to the matoran or both can go to your mask collection
@acesongbird
@acesongbird 7 ай бұрын
I pronounce the first “A” in “Mata” like the “A” in “bar”
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
you’re WRONG
@Soupshrimpish
@Soupshrimpish 7 ай бұрын
WOOOOO! I can finally make Onua do flexing poses!
@beanboy88
@beanboy88 7 ай бұрын
I was so sad when I heard about Eljay’s death. Hearing that he slipped on banana peel and cracked his head open, really struck me deep. Rest In Peace, King
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
poor guy is banana peel bones 😔
@mikafapiano
@mikafapiano 7 ай бұрын
R I p eljay 😢
@SliderTurtle_451
@SliderTurtle_451 7 ай бұрын
8:23 Did Eljay really pass away??
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
yes but he was kind enough to appear in this video anyway
@carloseduardopinto532
@carloseduardopinto532 7 ай бұрын
I prefer your original Toas that you made for Is always bright in Mata Nui
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
they have the same torso design, only difference is the limbs--should be real easy to reverse-engineer
@the_Jimmyest_of_Jim
@the_Jimmyest_of_Jim 7 ай бұрын
Never thought I would see the day where I can make these wonderful creations without needing to make mirco transactions and possibly getting a virus.
@purplehaze2358
@purplehaze2358 7 ай бұрын
I'm of the opinion that 2001 was actually the weakest of the Bionicle lines in terms of raw set quality.
@jemstipher
@jemstipher 7 ай бұрын
Great video, it just sucks that Eljay's dead.
@xXichibanBaller
@xXichibanBaller 6 ай бұрын
13:24 I was not ready for this three-pronged assault 😂😂😂☠️☠️☠️☠️ Edit: 38:38 ....did you just call me a transformer???
@ScarletSteel
@ScarletSteel 4 ай бұрын
Hey! Just getting back into Bionicle and want to build these. Is there parts lists I can look at? And who originally designed these versions? Thanks!
@mootroidXproductions
@mootroidXproductions 4 ай бұрын
@@ScarletSteel hi! the designs are about 75% my original ideas. i credit the other designers in the video- Lalam and Mizzino. and i’ll put a link to the parts list in the description. gimme like 10 minutes EDIT: still working on that. but the parts list is pinned in the bionicle channel of my discord: discord.gg/XsE4rvjzDz
@DaftViru5
@DaftViru5 7 ай бұрын
All jokes aside your builds are fantastic 👏
@Thatonegreyofficer
@Thatonegreyofficer 7 ай бұрын
HHEESS ALIVE
@aramentum200
@aramentum200 7 ай бұрын
This was an entirely hilarious and ultra based rant-tutorial-ytp 😂
@callisquirrel9622
@callisquirrel9622 7 ай бұрын
RIP Eljay, but loved the video
@El_v3
@El_v3 7 ай бұрын
We will always remember you Eljay
@Alfie-mp8qw
@Alfie-mp8qw 6 ай бұрын
Can I use the legs for my moc please
@mootroidXproductions
@mootroidXproductions 6 ай бұрын
of course! that’s what the tutorial is for!
@DecepticonScout
@DecepticonScout 6 ай бұрын
Gali is my favorite and first figure. 🌊
@benjaminlatimer6676
@benjaminlatimer6676 3 ай бұрын
4:55. Chill, bro. He's all yours.
@Dogasupreme
@Dogasupreme 7 ай бұрын
Maybe Hot-Take: Mata Revamps are too overdone, to the point of driving some people to actively dislike that Era of Bionicle (I'm getting close to that myself)
@mootroidXproductions
@mootroidXproductions 7 ай бұрын
i have plenty more but these are the most requested
@brainafkstube5393
@brainafkstube5393 4 ай бұрын
Cool slug you got!
@BaldiTheBully
@BaldiTheBully 3 ай бұрын
I miss Bionicle so much :/ I had 2 figures and I always wanted to buy some when I was older; now they've been discontinued and my dreams have been crushed
@Cakeandguts
@Cakeandguts 2 ай бұрын
17:20 Oh come on that’s clearly a clothes hanger! Ps Poor Eljay, I remember how the vahki took him out in that white powder sting operation. I miss him very much. 😢
@Idk89789
@Idk89789 6 ай бұрын
Saying “Leave politics out of Bionicle!!!” Is like saying “keep politics out of metal gear solid” you can’t
@gasian5347
@gasian5347 7 ай бұрын
YOU MADMAN! YOU HAVE DONE MATA NUI'S WORK (mine mostly cuz I asked in a previous video, srsly, thank you so much) 🔥 💧 🧊 🪨 🍃 🌍
@avohkiistudios
@avohkiistudios 7 ай бұрын
I fricking hate when people take away Pohatus thiccnes! Hes supposed to be a cute femboy (he just like me fr) so instead of going against it embrace it and youre a real one for doing so! :3
@huyphan7825
@huyphan7825 4 ай бұрын
To demonstrate Gali's womanly disposition, she has an extra technic socket in her chest. Because, as we know, all woman have a third elbow joint jutting out of their breastplate.
@wrenmacneil7703
@wrenmacneil7703 7 ай бұрын
just starting this video but i pronounce it mata like cat, if you must know edit: my mans knowing so much about lego and yet not knowing about the brown/reddish brown divide is very funny edit 2: the pins on gali's butt actually *do* come in some other colours now! very recently they've started making red, white, and dark grey ones edit 3: what a twist !!!! that was a very good video. I'm not a bionicle person but this made me kinda wanna be one
Every LEGO Bionicle GLATORIAN Built Better
16:10
Ben Cossy
Рет қаралды 12 М.
It's Always Sunny On Mata Nui (Bionicle stop motion)
3:15
MootroidXproductions
Рет қаралды 116 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Bionicle Teambuilding Workshop
5:29
MootroidXproductions
Рет қаралды 42 М.
I Built the BIONICLE Villain LEGO Never Released
26:44
MitchBuilds
Рет қаралды 209 М.
Show Accurate Evo Breakout Moc Instructions
6:33
Bionicle Moc Instructions
Рет қаралды 8 М.
Bionicle Game Mods are INSANELY Good
13:44
oboeshoesgames
Рет қаралды 499 М.
Bionicle COULD Be Back-Here’s What It Might Be
13:07
JettKuso
Рет қаралды 50 М.
As Above, So Below - Bionicle Edit
3:49
SniperDog
Рет қаралды 25 М.
Every LEGO Bionicle TOA MATA Built Better
13:07
Ben Cossy
Рет қаралды 21 М.
IDOL OBSCURA | Stop Motion Horror
5:36
MootroidXproductions
Рет қаралды 4 М.
I Built My Best LEGO Creation Yet
12:06
MitchBuilds
Рет қаралды 548 М.
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН