mopar distributor curve make yours right part 4

[@januaryonenineteenseventy4195]

I just love Fathers or Grandfathers being real fathers. YOU are making a man out of him. Awesome. And Awesome info. I believe, could be wrong, but, MP performance "phonebook size" quotes up to 60 on cruise. I'll have to dig mine out of the attic to see again. 30 years ago.

[@MarcBchannel]

Awesome video. Thx for passing on old school knowledge to the next generation. Tell your assistant "Great job" on the camera work. Cheers

[@talljohnsfunshop2722]

Thanks! Will do!

[@moparnut6286]

1st Lean burn 1978 my New Yorker had it I converted to Mopar electronic ignition with a vacuum advance dizzy an did the wiring before the high performance Mopar mag article. On a 400 that car was a hell of a sweet ride! I still have the engine for aonther project. The FBO plate cool but I'm old can't put the welder down!... The vacuum cans come in different degrees just double the number on the arm and you do have some adjustment in the can most of the time. Keep up the great work teaching the world that timing is everything!😎

[@alwaysabeliever108]

Howdy boys ! Super cool truck , she fires right up!!

[@MoparMan-ff8fb]

Good to see you John . Glad you and the family are doing well . Great video 😎🏁

[@JustMoparJoe]

Excellent video, John! You’ve eliminated the voodoo muster of the Mopar distributor. Thanks for the shout out. Thanks for the help and support on getting mine tuned in! Especially on that funky bronco. I think that pertronix distributor came with 22 degrees of advance!

[@talljohnsfunshop2722]

Yuck 22, that's a ping monster if your initial ends up high. I don't know how much help i was maybe help confirm what you already knew. Keep up the good work JMJ I love your channel

[@stuckinmygarage6220]

Hello, John and Jacob, Thank you for your videos. They make sooo much sense! FYI, I just talked to Dana Briggs and ordered the FBO plate. She spent a lot of time with me; very pleasant. Best wishes and Happy Thanksgiving 2023! 🙂🙏🇺🇸

[@talljohnsfunshop2722]

That cool enjoy

[@jodaddysdodgegarage3533]

Great description. I can appreciate passing that kind of great knowledge on from one generation to another.

[@Mynextproject_74]

That's a great video! I'm glad you're back making them!

[@KevinShannon-v4s]

That is one lucky kid right there!

[@jasonfalk7696]

Great video John! That plate seems like a game changer honestly. Welding up the holes, and trying to accurately drill them evenly isn't that easy.

[@talljohnsfunshop2722]

Jason that plate is sweet and your right the old fashioned way of getting it done won't allow another time until you do it again but the plate mean no trickery. That means a stock poly is set and now your stroked ported headerd poly is just a adjustment. Easy always makes me happy, thanks for watching

[@JonnyMopar]

What an awesome video John. I'm gonna share it.

[@talljohnsfunshop2722]

Thanks jonny I really appreciate it. I've been wearing the heck out of my new shirt. Jacob found a good spot on the golf cart I'll send you pic later

[@lightingmike1242]

Can't wait for the weight spring setup video.

[@moparmission7093]

Thanks for the educational video John!

[@talljohnsfunshop2722]

Hey thank you for watching

[@JeffLeblanc-xb7qe]

Tall John you got a polite boy he’s going to be smart with mopars also do you still talk to lamb chop also you are a good dad

[@HoosierGarage]

Love it, Thanks John.

[@highman9836]

Great explanation! Thanks

[@felixlafuente9714]

Grest video! We miss you...

[@joshsiegle1229]

So it seems like that cylinder that was missing is not missing anymore? Maybe I missed that video John. :) That truck is fantastic - my Dad had a 76 Ramcharger with big block in it. And yes it had an 8 track player - Beatles Revolver and CCR Chronicle were usually in it.

[@talljohnsfunshop2722]

Nice notice. The valve is fixed vid comes out soon. Your dad had good taste in 8 tracks by the way.

[@glennappelgren5492]

Great video , thanks !

[@yeboscrebo4451]

Interesting. I was under the impression the lower initial aided in quick startups. I guess I don’t understand why firing off earlier when that piston is moving so slow doesn’t send the piston backdown backwards

[@talljohnsfunshop2722]

Trying to send the piston backwards is just past the limit of initial timing. That is typically around 19 or 20 depending on your engine. So most engines end up around 18. It could be lower then that like 17 or 16, because every engine combo is different. But that's our job as a tuner is to find that limit.

[@luvkountry]

Where can I find one of them Trucks..? Love them. Thanks so very much for sharing your talents.

[@talljohnsfunshop2722]

You and me both. I love the d100.

[@luvkountry]

Mt young fella has an 84 - 100 with a 318. It is one tough truck. @@talljohnsfunshop2722

[@luvkountry]

Trying to figure out how to re-curve a lightly cammed 318 that has the 360 heads on it. The engine came out of an x police ghost car vehicle and we rebuilt the whole engine.@@talljohnsfunshop2722

[@ChrisTheBmxGuy]

I've been hesitant to mess with my d150 timing as it starts super fast at 10* advance and its my daily. I know it has more in it but ill worry about that once I put a new timing set on it. My 79 camaro I limited the mech advance with a set screw and bumped the timing up to around 12* and limited the vacuum advance by welding the slot up on it. Also put lighter springs in it. (I love the ease of the HEI setup) starts up way better and has more oomf in general but now I see it fighting compression sometimes when cranking. Just a little old 305 with a holley 4160 and weiand intake. I've heard its really dependent on vehicle weight for how quick the advance comes in on a close to stock car? Maybe in that video you can give detail on how to tell if it needs quicker or slower advance. Still really new to this.

[@talljohnsfunshop2722]

Hey Chris I love that your working on it even if your hesitant what you did is way more then most. The HEI setup is sweet for sure. The next timing vid me and jacob are going to discuss the sring thing. As far as weight of the vehicle I haven't heard that but where I max it out at with spring tuning is no later than max torque so if your cam and engine combo is 2200 that when I want it all in or 2500 that's all in and no later. I make sure mine is all in at Cruz speed what ever rpm at about 45 mph more to come it the future. Thanks for watching

[@tjt4036]

Great video. Does the 8track play in the truck. Been a long time since I have seen one of those. Looking forward to more dist. videos.

[@talljohnsfunshop2722]

Yes it does TJ T. I put a short up a bit ago plying it.

[@tjt4036]

@@talljohnsfunshop2722 Missed the short. Will look for it.

[@BlindBatG34]

Hey John and Jacob. I've got a stock slant 6 in my '65 Dart. Do you any suggestions for how much advance to dial into a slant distributor?

[@talljohnsfunshop2722]

Hey BlindBat I set my slant 225 @initial 20 degrees the centrifugal is 32 and vacuum is 48 degrees. Yours might be close to that but I'm shooting in the dark.

[@autonomous_collective]

FBO Mopar Distributor Limiter Plate

[@lordsauto]

Do u do any chevy hei's

[@talljohnsfunshop2722]

I do on occasion I will be doing a gm points soon. They are similar but not the same.

[@neco1562]

bravo