MOPAR Intake and Cold Air Intake System

[@jwoodard1369]

I got my lower box an tube from y’all an you told me about the two screws on each side to get cap off while I was doing it y’all have great customer service and most knowledgeable dealership around thanks

[@lylereinier4989]

I have a 2015 Challenger SRT392, and I used the complete 2017 T/A hood kit to make my hood functional. It’s awesome having the hood intake really work and not just look like it should. Got it at Steve White Motors.

[@louiewatson9389]

The challenger I have is a granite r/t blacktop package that used to belong to the parts manager there. It has this same intake but the airbox is a little too tall and makes the hood stick up a little on that corner.

[@hrantmelody]

does anyone know the item number of the top portion solution (T/A system) @6:40

[@ELESTEECH]

I have a 2012 Challenger 5.7 R/T with that Mopar CAI. I upgraded to Vland aftermarket headlights with the inlet tube and installed the four clip Mopar tube to my CAI. Definitely possible for a 2011-2014. 👍🏽

[@MoparHollics]

Wow so many variations on OEM air filters especially for Dodge thanks for the info very informative

[@gregandkarafirestone]

Great video. I have a question regarding a 2018 5.7 R/T. What's the difference between 68239826AA and 77070044ad besides the inlet tube? I noticed the connector from the air filter to the valve cover breather hose is different.

[@thesaintsgang4225]

What is the part numbers for the 3 parts on the other table ( the filter and the cover and the tube )?

[@JRIFE87]

Can we use the black charger tube w/ the mopar intake box/CAI fit instead of the silver shaker tube?

[@CapnDanTreasures]

I just ordered a CAI direct from MOPAR, it's currently on backorder. for my 09' 300C (EZH 5.7L 375 hp) Heritage Edition. Does this kit include parts to make it a true CAI, and if not, is there a way to make it a true Cold Air Intake? Are there other parts I would need to order to make it function properly? Thanks in advance for your help. Dan

[@Celsoyerena]

I have a 2021 challenger R/T. Top box doesn’t have the oil breather tube. So I just replace the lower box and headlight rear tube correct? It doesn’t have the illuminated tube.

[@Murphys_Law9]

Is the OEM mopar cai better than the regular stock OEM air filter?

[@jwoodard1369]

So that top mount part to use a blue mopar cone want work on my 2019 scatpack with extractor vents on hood cause it would get water in or will it

[@moparnation2235]

ITS a non issue

[@theonechicagoil3210]

Where are the links for the top cover and that option hit the hood and it will most likely let in lots of hot air won’t it ?

[@moparnation2235]

www.stevewhiteparts.com/steve-white-catalog-11-18-challenger-charger-300-cold-air-intake-cai-5.7l-using-original-box-oe-swmcai57?parent=1004&fbclid=IwAR1qf7O622SJ2aJxiIWoQ9qpSNM0ioEvnjoD9ldhtLaQnMD5eV8ob-Yg4_U

[@moparnation2235]

www.stevewhiteparts.com/steve-white-catalog-11-18-challenger-charger-300-cold-air-intake-cai-6.4l-392-using-original-box-oe-swmcai64?parent=1004&fbclid=IwAR2UaKcsUNH0K3gfsmQUWkkFdT8HiOfXmVu167f0F5_dU79K9H5Thm91gAw

[@JR-yt5dq]

Great info Luke. I have a 2015 Challenger 5.7 with a Magnuson SC. Will both the TA and Mopar CAI system fit?

[@steveshilt5438]

I have a '13 Challenger RT with the Mopar exterior appearance package. I want to make my hood functional. Like the Mopar 10 cars. I would like the part numbers each peace and what air box will work? Please

[@leosanders3784]

Ok what's the part # for the T/A air box system cause I want JUST THE YOP PART THAT GO ON A HELLCAT AIR BOX?

[@leosanders3784]

Top part lol

[@moparnation2235]

sold as a kit only

[@moparnation2235]

www.stevewhiteparts.com/oem-parts/mopar-fits-challenger-only-t-a-hood-cold-air-intake-77072436

[@leosanders3784]

Ok does this kit fit a dodge charger?

[@leosanders3784]

There no other way to use the hellcat air box with the cold air intake

[@thatchargerguy]

Do you sell a kit for 5.7 charger with the T/A top and hellcat lower with tunnel and front piece behind the grill?

[@darkNovaskar]

It says it doesn't fit anything higher than 2016 my challenger is a 2018 rt

[@BLACKHEAT1028]

I have a 2016 Shaker Plus with the stock CAI, I added the inlet from the headlight. Is there a part I can use to swap out that plastic piece in the from that get connected to the box on the left side (looking facing engine).

[@moparnation2235]

from the passenger side, nothing available

[@moparnation2235]

in my opinion is a non issue, raced with open extractor in heavy rains with no issues, would recommend using a cover in heavy rain maybe

[@toddmargo9749]

I have a 2014 R/T and I don’t understand why Mopar would make their cold air intake air box with a square cut out for the air to run through the challenger headlight if it was made for 2011-2020 challengers. We didn’t have the option to pop out the center of the light to get air into the box, so we’re just getting hot engine bay air rushing into the box/intake…..

[@moparnation2235]

my opinion they were trying to feed as much air into the box as possible, later on they design a boot to go to the headlamp

[@blchemi16]

Do yo have the full cold air intake kit for the 2016 5.7 Charger? Or do you have the scatpack stage 1 upgraded for the 16’ 5.7 Charger?

[@moparnation2235]

2011 to 2019 the cold air for the 5.7 and 6.4 have not changed

[@guybusby5583]

Can I use it on Durango 2021 v6

[@moparnation2235]

different will not work

[@taherkilany1009]

I hv GT v6 2019 is the Air antike the same from 2011 to 2020? If u can give me a price estimate for v6 system as here is KSA the dealer ask me for 1700 USD without VAT

[@louiewatson9389]

You're going to pay more for American parts in Saudi. Simply because it's being imported. In Kuwait everyone says the same thing about buying parts for American cars.

[@ChallengeroftheDay]

Awesome Luke!!!😎👊👊

[@davem.539]

Nice to see some one who cares!!

[@moparnation2235]

nothing available from Mopar

[@Bigl_GsportLife]

Ok all sounds good but you just made a video about this as if the charger doesn’t exist 🤦🏾‍♂️

[@moparnation2235]

www.stevewhiteparts.com/steve-white-catalog-challenger-hellcat-headlamp-inlet-cold-air-intake-box-duct-functional-illuminate-swmhclight?parent=1004&fbclid=IwAR0Xk8I2VbrfAJ01ycvBl1v6d-jjeG2AAGyAHR_b6a3hV3MdHeF6hj40lWA

[@leosanders3784]

Ok will this work on a v6 with the hellcat air box and the air inlet tube?

[@moparnation2235]

promo code """ KZbin """"

[@moparnation2235]

www.stevewhiteparts.com/oem-parts/mopar-cold-air-intake-5-7l-77070044ad?fbclid=IwAR37ruEInPOWSEU9HWNc4OHhZ7tJ4GhhsLyIQ8O3BdtLc1r5sqYh9ZVZbHg

[@moparnation2235]

www.stevewhiteparts.com/steve-white-catalog-11-18-challenger-charger-300-cold-air-intake-cai-6.4l-392-using-original-box-oe-swmcai64?parent=1004&fbclid=IwAR3CMCchCGj_8VBGTuSIIPh_GaNVjSnR7er7ac0-PLR-MhaZexOk1b1ZEnA

[@moparnation2235]

www.stevewhiteparts.com/performance-challenger-hellcat-headlamp-ram-inlet-cold-air-intake-box-duct-functional-oem-swmhcbox-tube?parent=1004&fbclid=IwAR2tPMn-DLlgNTGfFe-4ySzbJX1ShSxI6y_8dTW7t6b_ICeIfXBnMNst1do

[@moparnation2235]

www.stevewhiteparts.com/oem-parts/mopar-cold-air-intake-6-4l-77070043ac?fbclid=IwAR22bUCt3FlF-SNLX-XnrnIx9Dpm-VmFGpjBL1kyWb6KPxa5EQyP0JoTBlM

[@moparnation2235]

www.stevewhiteparts.com/oem-parts/mopar-cai-cold-air-77072381?fbclid=IwAR0vfVt_O5V1Cet1N1jPzUilitpD0xhEIwGP_aYL533lvJXbXJQvubWX_ec

[@moparnation2235]

www.stevewhiteparts.com/oem-parts/mopar-cold-air-intake-system-77072385?fbclid=IwAR2O-V_Y6-1tZv57T8Zh1-SJl_YKM3X2Y79mF6ZylSpTycT-0BdYs40zEvc

[@moparnation2235]

www.stevewhiteparts.com/steve-white-catalog-11-18-challenger-charger-300-cold-air-intake-cai-5.7l-using-original-box-oe-swmcai57?parent=1004&fbclid=IwAR2vC4naeGkaNySKZDhkUNKsqAdjMczZBC8HqWYpmWPzKIAyvJQmXV6X2K0

[@moparnation2235]

www.stevewhiteparts.com/steve-white-catalog-15-18-challenger-cold-air-intake-cai-5.7l-6.4l-with-hellcat-box-swmhccai?parent=1004&fbclid=IwAR05Icq18JAlkgGXSWP6_kVaGMzOnN89aKxPgt2sS-hXN6YXlVge0Tj5ZPo