More Injora Wheels Including the BEST (so far)

[@stevemdelacruz5602]

I have a very similar rim they work great look fantastic and are plenty heavy

[@stevedelacruz3749]

My favorite the best i have purchased

[@arni7810]

Nice!!! Will injora wheels size 1.9 fit injora tires size 120mm by 45mm??

[@drivetowrench2709]

Probably... not all tire bead size is the same (annoying) it's hard to predict without owning every single type of tire. These type of wheel usually can be made to work but install can be a bit of a pain. Use a longer screw to get started and if the bead is too thick, be prepared to leave a little gap in the middle between the two wheel halves (not ideal but functional)

[@arni7810]

@@drivetowrench2709 oh wow, I thought I was the only one with this issues as the back piece didn't was to sit flush with the middle brass piece..ok I'll see what I'll do..thanks!!!

[@DB-qm4jx]

But are they nice?

[@hondafreak8613]

I have a set of injora wheels like this but 6 fat spoke. They look real good for money. One i got are 30mm wide

[@drivetowrench2709]

Yeah, for me the only thing that is a bit of a bummer is that the one set I got with tires, pre-assembled, most of the screw heads were stripped. Would be nice to be able to save that assembly time and be able to change tires later if you had/wanted to. Oh well...

[@RcDungeon]

Nice wheels!! Adding a set of each to my purchase list, great video gir yourself a subscriber

[@tvlcivillimited7872]

remember inner ring/outer ring for that wheels

[@stevelewis9677]

I have the blue ones and they’re excellent. I tried a set like the orange ones but they were a pain to mount

[@drivetowrench2709]

Fair enough. Did you use some funky tires? The orange ones definitely worked better for me with the large bead tires that come with the Gen 8. The cheapo swampers work with all the rims I've tried

[@jeremymorrow917]

If you mount the ring by itself first its wayyy faster! And easier too

[@stevemdelacruz5602]

I have them on the trailwalker

[@donaldhenke2750]

rimm size?

[@drivetowrench2709]

1.9s

[@Hirthirthirt]

can you bash these wheels or will the rubber come off?

[@drivetowrench2709]

They are pretty solid bead locks so you'd have to be pretty hard on them to tear the rubber loose. You could always add glue for a little extra grippy grippy

[@kSubscriberchallenge-fv5ky]

First

[@drivetowrench2709]

and only? 😂👍

[@sjoelkappa5956]

why is this in my recomended...