More Load Work with Staball 6.5, Dahser

/ robsreloading

[@jeremylauer5234]

so i re-watched your video as i did a load work up with that powder\bullet combo. started at 35.4 and .3 increments up to your weight and i saw 2894fps with a SD11.3. I'm in the northeast, at sea level and was about temp 81 with dewpoint 57. group was okay and will take a look around that and play with seating depth. this was in my Seekins, 26" barrel and I was able finally get the MDT BR Mag to feed reliably for the first time.

[@guardianminifarm8005]

Good results. Thank you.

[@buddyhughens7193]

If you are trying to split hairs as far as group size, a smaller point of aim might help. I use a circle drawing template and a sharpie to create a circle that my target dot fills up at 100yds. At least it makes me feel like I'm aiming small. Really enjoy your videos, thanks.

[@lemonaid1605]

I may have to spray some water mist around my rifle next range session if it produces groups like the first one you shot! For targets I like to draw a small purple circle with a white center (" o ") with a sharpie. You also might like the USBR target that has green printing, 25 bullseye circles and three top sighters.

[@CMR.718]

Do you have any plans to keep going with the 7mm RSAUM?

[@RobsReloading]

Yeah I still have that barrel on my HIT. I just have a lot of projects going on concurrently

[@Brushtail2335]

Is this at 100yards?

[@RobsReloading]

Yes

[@jeremylauer5234]

Don't worry about getting the video out for a specific time...life happens. I am curious how your lathe is working out. I need something for another job and some precision work and thought i'd get something to do some barreling work. I think you said you had a G9972Z and wondering if there is any barrel work that you can't do with that lathe? Thanks for any feedback. I'm starting to look into building something custom and a lathe would sure help.

[@RobsReloading]

I actually ended up selling my grizzly and bought a 12x36 lathe. The small grizzly lathe would do everything up to like a heavy Palma barrel. If you keep a look out you can find a good deal on a 12x36.

[@jeremylauer5234]

@@RobsReloading did you end up getting the 4003 model? i saw one on marketplace for a smoking deal, but missed out. Unless you got a different brand.

[@RobsReloading]

@@jeremylauer5234 no ended up with a central machinery for a price I couldn’t pass up.

[@jeremylauer5234]

@@RobsReloading Gotcha, thanks for the info.

[@RobsReloading]

@@jeremylauer5234 I’m planning to make a video on my new set up and opinions and such just haven’t got to it yet

[@LanceWatkins-w3q]

Have you tried h4350 yet? It's all I use in my 6 bra. Start about 32 grains. You just might be surprised.

[@RobsReloading]

Nope. Have been working with ball powders for metering through powder measure.

[@rustynut1967]

Those bullets usually do best from .010" into the lands to .010" jump. The bullet will not stick loaded into the lands that small amount as long as you are competent at finding touch.