More modifications to the Range Rover L322 | Overland build

[@robholland1937]

Be careful with those foam filters. They can break up and f up the MAF sensors

[@Overlanding4WD]

They are before the air filter, so it’s impossible for anything to get through to the MAF 👍🏻

[@joesm00th]

Hi Mark, I think you're wrong about the air intake on the later L322s. I believe they draw air from the top of the wing, between the "clamshell" of the bonnet and the top of the wing. If you look there are 2 black rounded rectangles at the very top of the wing, covered when the bonnet is shut. These are either side to feed each inlet for both banks of cylinders.

[@joesm00th]

Great channel by the way. Very inspiring!

[@Overlanding4WD]

@joesm00th Nope, they are inside the front of the wing, at least on the TDV8 4.4. Open the bonnet, look on the l left hand side of the air box, you will see the intake enter the airbox.

[@joesm00th]

@@Overlanding4WD that is correct Mark, they go into the front wings, just pull from the top of the wing not the side vent on 2010+ www.fullfatrr.com/gallery/albums/userpics/10183/normal_IMG_0489a.jpg