MORE POWER INCOMING PT.2: AIRTEC INDUCTION KIT & SHORT SHIFTER

Hey guys,
So here is PT.2 of my more power series. In this video I install an Airtec induction kit & short shifter.
CLICK HERE FOR PT.1:
• MORE POWER INCOMING PT...
You can get the products used here:
INDUCTION KIT -
www.airtecmotorsport.com/prod...
SHORT SHIFTER -
www.airtecmotorsport.com/prod...
Keep up to date with me on my socials:
Instagram - / st_rachx
Facebook - / rachaelbuckleyy
Thanks for watching,
Rach xx

[@RachaelBuckley]

👇🏼TAKING PREDICTIONS OF WHAT MY CAR WILL RUN AFTER ITS MAPPED👇🏼

[@arronjohnstracey3280]

Would that be classed as a stage 2 map?

[@RachaelBuckley]

Who knows🤷🏽‍♀️ I might go stage 1, might go stage 2👀

[@arronjohnstracey3280]

@@RachaelBuckley I'd say that you should go stage 2 cause you've got all the bits for it. I'm gonna guess around 250bhp for stage 1 and stage 2 maybe 290bhp, I'm not sure.

[@scottishcarenthusiastsandtrain]

262bhp is my prediction.

[@davidholding5335]

No decat ? 250hp ish maybe less

[@smurfsmurf2295]

Brilliant video love the humour give this gal a massive round of applause, most gals would be crying over a broken nail

[@Focusstmk2.5]

Fitting a induction kit has properly let it breathe holy hell that does make it sound absolutely insane well done

[@GreatYarmouthPhotosWebcams]

Great Videos helped me alot with my modifications to my Fiesta mk8 ST , Just ordered my Airtec short shifter and going to follow your video when fitting

[@jonathonjones8011]

What a beautiful video keep this up and can't wait to see what you do next 😀

[@NickG24]

You’re a dab hand at this now. Seem a lot calmer than me when I’m trying to do stuff! Well done, love the 80’s turbo noises 👌🏻

[@RachaelBuckley]

Thank you!

[@nigelmitchell5726]

Looking gorgeous , the car looks good too , good job Rachael ❤️

[@scottishcarenthusiastsandtrain]

Excellent video as always. That short shift has certainly improved the gear change. Reviewing a mark 8 fiesta for my channel later this week and looking forward to it it's only a 1.1 through....

[@Ed50482]

Sheeeeesh!!!! Looks amazing!!

[@tandy9647]

Nice to see you get stuck in and have a go at working on your own car, plenty of guys don't even do that they'll get a mate or a garage to do the work for them so fair play girl keep it up!

[@markmartin5629]

How can anyone not like watching a woman work on her car, keep up the good work 👍

[@Robstervtec]

That induction sounds Savage 😍😍

[@johnpardo4695]

I did the same to mine a while back and you never get bored with the induction flutter

[@arronjohnstracey3280]

I can't wait to see a driving video after the car is finished.

[@amywalker5640]

Sounds insane omg!! Best PE out there!! xx

[@RachaelBuckley]

GIRRLLLLLL💗💗💗💗

[@markymark3295]

Amazing 😍💯🔥perfect

[@toptraveller6704]

another fantastic video, it now sounds like something out of transformers.

[@vojtechptacek6650]

Great work with Fiesta, and good luck with mapping, only thing that i would recommend, do not use torx bits instead of a allen wrech socket, you will prevent stripping them.

[@weyland1000]

Just subscribed recently. Loving the channel. 👍

[@RachaelBuckley]

Thank you! X

[@bobcadet9446]

BEAUTIFUL❤️

[@paul1878efc]

About time 👀😂 been asking u for ages

[@RachaelBuckley]

Secret is revealed

[@davebaldwin340]

That's awesome what a difference in gears and the noise from filter your doing some great mods and that stunning motor well done

[@liddabean]

Seen this on the M6 with a twin today, sounded nice like!

[@hemalst9611]

Great videos , I've been on the Ford scene for years and its interesting to see how Ford has changed over the years. Keep up the self motivated videos great to see a gorgeous lady working on her own car 👌. Since you drove the MK2 Focus ST you still want one in the future? That Volvo 5 cylinder is legendary love mine 😁

[@RachaelBuckley]

Thank you & I’d most definitely get one in future!😜

[@Nortek3128]

Saludos desde España. Me gusto mucho el vídeo 👍

[@mattb9259]

Smashed it again chick! I reckon 252bhp when it’s mapped xx

[@Ste-H32]

I was in liverpool for the first time at weekend Rach 😍 ended up at the docks near all the bars! Cant wait for this video 👌🏼 p.s big up the scouse accent 😂 xx

[@RachaelBuckley]

Aww hope you liked it! & see you at 6:30 for this video💗

[@Ste-H32]

@@RachaelBuckley you could be fitting a air freshener to your car and i'd still watch it 😂😍 hahaa! xx

[@meganjay30]

Put it in the bin 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣♥️♥️♥️♥️👍👍👍👍 awesome videos and I hope you never stop!!!

[@RachaelBuckley]

Tried, doesn’t fit🤣 & thank you!

[@Birmingham_racing]

How the hell did I get unsubscribed from your channel? I don't know but good to see you again

[@davidlawson6529]

Bit worried about this fitment, but figure you have been advised to do it! Sad you couldn't locate the screw properly, and what happens to the desiner airbox cover??

[@grahamstephens9931]

Amazing level of knowledge and skill when it comes to this stuff. You’ve really managed to turn that car around, just in time for summer 😁

[@nitro74cs]

Sounds great and I bet after that short shifter conversion it feels good. If it was my car, I would change that gear knob as well.

[@RachaelBuckley]

Yeah it makes a hell of a difference but if you don’t like that gear knob, you should have seen the standard one😅

[@nitro74cs]

Rachael Buckley oh dear was it that bad? That was just a personal opinion, I am not a big fan of that carbon fibre lookalike accessories, I would put like an aluminium one like the ones came standard in Ford Pumas. Anyway good job and interesting videos.

[@RachaelBuckley]

It was awful, but this one is a genuine carbon fibre one from Ford👌🏻

[@MrProgrammingexpert1]

How tight did you do the bolts for the heatshield mounts?

[@ads14a1]

Great video👌🏼 .... think I’m more impressed with how you did all that and kept your white top clean 😂. I’ll keep an eye out round maghull for it 👍

[@RachaelBuckley]

Always round them ways✌🏼

[@ads14a1]

@@RachaelBuckley you getting it mapped locally ? My mate kenny , has a good rep with the Ford community @ motorsport development in Blackpool 👌🏼

[@dogbite5509]

It might be worth using some Ford approved grease for your gear linkage. I dont know what they recommend but I use poly-urea grease on my VW linkage.

[@RachaelBuckley]

Thank you! I’ll look into it x

[@mzr3553]

Dankie paratjie.

[@cheo.5587]

why are you putting a torque bit into a Allen key bolt?

[@mikebull1972]

Nice vid! I see you're still using the bonnet stay- I can't recommend the NB Styling bonnet struts kit highly enough!

[@RachaelBuckley]

I’ve actually been looking into them! My next mod I think 100%

[@mikebull1972]

@@RachaelBuckley Cool! There's a great fitting video (and a discount code!) via the 'Driving with Ben' channel.

[@robfitzs8662]

I'm new to your channel loving your content just wish the sound was better quality, looking forward to seeing what comes next

[@RachaelBuckley]

This video was filmed before I got a microphone etc, the sound quality will get better😊

[@robfitzs8662]

@@RachaelBuckley Just seen the removal of ur back wiper Great job but just wondering would it affect your MOT as ur car came factory installed with it??

[@RachaelBuckley]

A rear wiper isn’t part of an MOT, it’s not illegal to remove x

[@stevenfoleyuk9404]

Do you have your engine recalibrated ?

[@samcook7046]

That engine bay dress up kit is not the one 😂 good vid though!

[@x58evo2puma7]

All depends what map u go for stage 1 about 250hp stage 2 about 265hp stage 3 about 300/301hp depends on mods on the car but the figures don’t mean a think it is how it feels on the road I’ve got stage 5 st just under 400hp and it feels great 👍 and very fast two

[@ITzKaix]

does the pro hose come with the kit or is it seperate?

[@RachaelBuckley]

It comes with it!

[@steve37ist]

Sack the camera man haha (joke) another great video rachael xx

[@RachaelBuckley]

Don’t worry haha I’ve had words, next time he’s sacked🤣 & thank you x

[@anth5189]

Well this is heaven. A gorgeous girl working on a car.

[@leeh6953]

What a girl, Loves cars, not afraid to get her hands dirty, and good looking, could you ask for more 🤷‍♂️😆

[@jayc8332]

Good video cars looks sick, but that induction noise sounds so strange lol

[@jeffreyrobotham9318]

Sorry to discuss other options but it's relevant! Manny & his lovely wife dropped a hum digger of a video (I've come across Mrs Manny before. She has her own channel. However it's hard to contextualise taking to females let alone attached) I'd liked the video before even watching it. There is a modern day parable in there for the modern day woman. Trust me I speak fluent female 💯

[@buzzardboypike936]

I think a budgie flew in there ???

[@ohgoaway3610]

Coolio

[@philipkirkpatrick7685]

Really enjoying the vlogs but it would be better sound quality with a Bluetooth microphone

[@RachaelBuckley]

Watch the most recent videos, I have microphones now☺️

[@njp3729]

Don’t know what it is but your mic sounds weird? Love the content tho!

[@RachaelBuckley]

I filmed this before I had mics, the sound will get better but thank you! X

[@pavel14111]

Is it possible that I seen you in Westhoughton?

[@RachaelBuckley]

Most likely not but might have been my mate though!

[@charleswrigley9488]

These cars would take off lot quicker if they had paddle shift in steering wheel or automatic because they wouldn't dip in between gear changes like a manual. They would get better 0.60 time to.

[@grahamcrawley2639]

You're brave wrenching in a white top

[@RachaelBuckley]

Ahhaha be reet

[@ErnestoLopez-xy4lm]

Por favor puedes traducir tus vídeos al español saludos desde españa

[@bap1420]

5:58 As all the other mk8 short shifters, that one is hitting the shifter plastic linkeage... Worst case scenario, you will brake it... or not properly engage 6th gear and ruin the gearbox...

[@RachaelBuckley]

Be reet, don’t you worry

[@bap1420]

@@RachaelBuckley Np :P I was just remembering my mate's last tow trip on his mk8 ST because the plastic linkage broke and he couldn't engage / disengage any gear.

[@tonyjones7372]

somebody just told me there was a car in this video.

[@derekporter66]

Let's get them knockers out

[@ImKrull]

🤣🤣🤣🤣

[@derekporter66]

@@ImKrull wheyyyyyy go on lads

[@jordanwelsman3348]

😂😂😂😂😂😂

[@RachaelBuckley]

Think you’re on the wrong website for that🤣

[@daves1245]

@@RachaelBuckley Well said Rachel !

[@darkclouds5261]

Those jeans look really nice from behind!!! 😏

[@michaelhubble8743]

If the heatshield is metal & not carbon fibre, you're pissing against the wind! You put anything metal in the engine bay the only thing it's gonna do is heat up, totally defeating the object

[@mikebull1972]

I've always thought that, too. On their own, these kits are more about the whooshy sound than any significant power gain.

[@goodlookinouthomie1757]

Somebody buy this girl some overalls for the love of God.

[@RachaelBuckley]

Would that make you feel better😂

[@goodlookinouthomie1757]

@@RachaelBuckley Well it would mean I could concentrate on the car!

[@Fiat20vt]

That will not help the cars bhp or engine at all ppl best keeping air box as will sound much better from exhaust

[@autisticwarrior025]

Love your video can you please tell me how I can improve my youtube channel please its call autistic warrior thank you 😊

[@sickbeatsproductions]

sounds worse after install

[@chrismorley6734]

Sounds Awful... ditch that cone , put the old air box back on with a flat pan filter. The car needs cold air hence the intake at the front. You are only pulling in hot air from the engine. Defeating the object. You may like the sound but not ideal....

[@jondavies4775]

Sorry but that sounds horrendous

[@RachaelBuckley]

Each to their own🤷🏽‍♀️

[@K33EEE]

I agree 😂

[@Alfie.Goalkeeping]

I agree as well, sounds like a toy engine these new fiesta ST's sound shite. They looks half decent tho

[@Cantakor]

The sound quality is so bad, I dont unterstand any word.

[@dubzuk3710]

Sounds rubbish

[@danielcreed8670]

No idea how to drive a car!!

[@RachaelBuckley]

Race me