More Repairs to the 1940 Farmall H

Fixing up the 1940 Farmall H we got running in the last video.
Thanks for watching!

[@edkennard72]

Young man I take my hat off to you you are a mechanic that a lot of places would love to have especially tractor supply and tractor repair you have a knack for figure and things out without a manual and believe me that's a god-given gift right there I enjoy watching you your concise and precise in your explanation of everything that you do it's nice seeing you saved that old tractor Good luck young man

[@odc43054]

Always enjoy seeing you bring these old classics back to life. Great work!

[@randygrider9758]

The muffler straightening was a bad idea ! Lol. Should have removed, heated with torch then slid over a pipe in a vice to bend. I have patched holes in exhaust manifold with just a screw. Tacky I know, but it’s worked for 20 years ! I like your channel !

[@noelhenderson8095]

talk to Pete from just a few acres farm he is a very knowledgeable man on these tractors if you have a problem he would be the man to talk to he can pull these apart like every nut and bolt and put them back together if you ever need parts he could tell you where to get them

[@markpayne3029]

Nicely Done!! Enjoying seeing old machines come back to life!

[@roberthocking9138]

Good job young fella, you have preserved another one and saved it from the scrap metal dealers

[@billroberts3864]

Thanks for investing time and dollars into this H to keep it away from the scrap heap so it can continue to be productive. Blessings to you.

[@aldhill]

Chris from NNKH would love the work you do..... love his channel also !!

[@mhoff5777]

Great job getting the H to run again. I like the Little Genius #8 plow; I have one just like it for my H.

[@texascottonfarmer]

👌👌👍👍 Nice work and thanks for the video. And thanks for resisting the urge to hold the camera in your hand, like many so-called "content providers" do, which invariably causes the video to shake and wave around randomly.

[@neilschipper3741]

Great job on both videos and getting the tractor back up and running.

[@yolundadelorenzo6840]

amazing work Andrew - enjoy your editing too!

[@wademizelle3433]

Great job & video, keep making them , I watch all of them. Thanks

[@carlmarinaccio503]

Never start a tractor from the ground! Never! Nicely done with everything else though. We need you around!

[@STOstuff]

I just sat on an h today for about 6 hours mowing hay I'm very sore currently and I'm only 17 they were tough sumbitches back then

[@annalorree]

They just didn’t have any choice, it had to get done. Have a safe and productive haying season, I did that every year in some capacity from age 5 to age 30. I miss it, but my back doesn’t!

[@rustypepper4780]

Love the videos man keep up the good work

[@liljoeii6091]

Awesome job sounds good. Runs good thank you for the video

[@larrybarbaree2091]

Andrew please do a video this summer on your journey into plowing. As always brother i enjoyed it

[@RustyZipper]

10:50 nice shirt 👍 he’s a great mechanic

[@richardschaffling9882]

Well done

[@RAKINAUS]

nice work, sounds good

[@jongraeber8245]

Great work

[@aaronmccreight_trains-tractor]

Great stuff keep it up!

[@skn9895]

I would have died laughing if you had pulled the tree down instead of straightening the muffler...

[@richardbryant7972]

Very nice tractor, sounds great good job as always

[@curtcoltharp3719]

I’ve got a jack like that that will pop you in the jaw if you’re not careful. Sometimes it’s the only jack that will do the job.

[@WaynesAdventure]

You do a great job

[@harrybeach109]

Nice work.

[@nhcaesar9556]

I just discovered your channel. I love old tractors. I had a 1951 8N for over 40 years. I watched the two part video on the 8N you were restoring. I hope to see the next video on the rest of the restoration soon. I am not familiar with a Farmall H. I was wondering ... when you drove off in it did you have it in 1st gear? It seemed awfully fast to plow with if that was 1st. Thank you for posting these old tractor videos. Keep up the good work!

[@thesmallenginekid]

Right, I think I was driving in 3rd gear. I submitted my Farmall M restoration in the Chevron Tractor Restoration Competition. You can vote 3 times a day for me as a Fan Favorite! Thanks www.chevrontrcvoting.com/Voting/Details?entryId=37

[@jwrappuhn71]

Excellent.

[@budlandis3084]

Good job.

[@brucebonnevie8950]

I have a Farmall H That sat outdoors for 6 years. It is 12-volt positive ground. distributer I have set the timing per 1st cylinder I have spark @ the points, coil wire and plug. needle valves set @ 1 1/2 turn and 3 turns. Any thoughts are welcome Thank you Mr. B.

[@Flowing23]

well done 👍👍

[@jamesjarratt7907]

Will you do a full restoration on this tractor?

[@InmanFarmHeritageDays]

Good video.

[@86lowrider]

I have a tractor you can have if you’d like it. I think it’s a 1948. It’s a grey fergie. My grandfather was a dealer and this was the first one he bought. Runs but the block is cracked between the cylinders. Common issue as I’m sure you know. We do have a block that’s good for it. The tins are descent shape. The rear rims are junk, fronts good. Tires would be ok for static display but they are the originals. It’s located in Parish NY. I’m not sure if you travel that far. I’m not sure how to find contact info on here. Reach out if your interested we’ll get together on it. It’s free for the taking.

[@jakep7469]

can i ask how old you are? and where abouts are you located? and do you want to be my friend ? why is it nobody is like this around me. lol. you are the man my friend keep it up. subscribed. you give me andrew camarata vibes, and vice grip garage, a little 2vintage too. keep it up. love the videos. just watched the resto of the JD you and dad did great stuff!

[@very5ick112]

andrew camarata . harrrr

[@graves008]

love your videos, sucks what happened to your truck.

[@thesmallenginekid]

Thanks, on to one bigger and newer hopefully.

[@genetomblin2883]

Well I may be an old fart but there was a day when most American cars had a bumper jack a lot like the farm jack you referred to a most unsafe. Plenty of people dropped cars on the side of the road when changing a tire with them. I was especially fun on a hot day on asfalt when the base of the jack would sink unevenly to start the car going over and down. Late 50s and early 60s boulevard barges wer the best at this trick. Some of the connection schemes between the jack and the bumper were less than ideal too.

[@mightymo7852]

Any kinda pipe like that muffler thats bent or dented, try heatin with a torch and drivin another pipe that will just barely fit down it to straighten it out

[@johndeere1951a]

Did you ever sell the tractor with the plough ? Where is it living now ?

[@MtothaMFJ]

Hey Andrew, what's the plan with this Farmall H? I am probably 3 times your age and just about to buy my first tractor, a 1939 Farmall H. There's plenty on your channel that I'm sure will help me. I've never restorted a cardboard box let alone anything else! Mike

[@thesmallenginekid]

Right now it needs a few little things like new battery terminals and a new needle and seat but I use it occasionally to move trailers around.

[@MtothaMFJ]

@@thesmallenginekid Okay, cool. Do you plan on doing a complete restore on it at some point?

[@thesmallenginekid]

@@MtothaMFJ No, I don't plan on it.

[@jacquespinard2293]

👍👍👍👍👍👍

[@egraham9049]

Do you sell these?

[@jacknorman1131]

Please adjust the carb, it does not run smooth

[@nigelgwillim644]

LOODS A SOUND BIT OF KIT AND I H C PLOUGH I THINK

[@normanpatterson6012]

Why is it always raining in your videos? You live in the Amazon😅

[@Flyingbeanman236]

Nah slap a super H carb on that thing and get some power

[@very5ick112]

hellz yeah power up

[@JamesColeman1]

Maybe dad can buy us some lighting so we can see what you’re showing? Cheers.

[@arnoldgonzalez7377]

Good job.