An Amazing Haul of JUNK! 1955 Chevy Nomad?!? 1958 Station Wagon, 1975 Cadillac 500, Posi and MORE!

Here we are again, doing what we love. Loading up junk out of the trees and hauling it home to take up space and stare at in our backyard! Hit us up if you see something we bought that you think you can't live without. As always, thanks for watching!
Check out our new and improved Mortske merch site!!
mortske.com/
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: [e-mail]
Instagram: / mortske_repair
Ship us things if you wish:
PO Box 1
Gwinner, ND 58040
Tools we use:
Rubber tool mats: amzn.to/34FEw6R
Cyclops shop light: amzn.to/3oKaRAu
Ultrasonic Cleaner 10L: amzn.to/32fwikN
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits (not the 3 sided ones I like, out of stock): amzn.to/3n5UoVr
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.com/user?u=49148891
#auction #37ford #mortskerepair #abandonedcar #patina #ranwhenparked #barnfind #rustygold #hotrod #customcar #lowrider #ratrod #bigblock #saved #willitrun #auction #auctionsale #farmtractor #fordtrucks #scrapiron #junkcars #junkyard #willitrun #deadcars #1937ford #hotrod #impala #onlineauction #auction #estate #estatesale #chrome #fordflathead #flatheadford #flathead #mopar #moparornocar #1968dodge #1968plymouth #chryslernewport #newport #imperial #chryslerimperial #derbycar #demolitionderby #derby #smalltown

[@donaldwilliams2270]

O GOOD NOT A 2 HOUR MOTION PICTURE , THANKS

[@moremortskerepair4354]

You’re welcome

[@ghouliesgarage3922]

I would have "LOVED" a Two hour video ! But this was a nice treat !

[@twobabejinkins1736]

@@moremortskerepair4354 another live one Sir ! Do they watch just to hate ? Or is it P in disguise ?

[@danimal4959]

o good another negative nancy...yay!

[@daveparnell4044]

All Mortske videos are welcome. The longer the better

[@mattbrown5511]

Whether it is 40 minutes or 150 minutes long, all your content is amazing. Thank you for bringing us along.

[@lowrollins1076]

Good on ya Ol’ Mort. I like that you and Puddin are throwing out Slick 50’s new channel. Nice to see some positivity going on instead of the garbage you see in the media.

[@moremortskerepair4354]

He's a good kid!

[@OKspeedandcustom]

@@moremortskerepair4354😂😂

[@kimberlywilliams9757]

@@OKspeedandcustom 😅😅😅

[@CHersh61661]

Boy, ol Duff knows when that car starts to move, that's when the critters start running

[@moremortskerepair4354]

he's no dummy!

[@user-ht1xu4gv2u]

Last year for the caddy with a 572. Motor. Zoom​@@moremortskerepair4354

[@johnnymack8442]

And the rollback earned its keep again. Man i love that thing.

[@moremortskerepair4354]

me too!

[@mikepoint4717]

Pick n flip is part of the game when you’re running your own show , heck even Duff needs to be paid !! . Cheers 🇨🇦🇨🇦

[@jeffwb6956]

Cowboys hung lanterns from their horses at night. It was the first case of saddle light navigation.

[@logan-jj9hv]

That's great🤣

[@moremortskerepair4354]

lol

[@hanknipper3921]

Another great video! It’s always good to see you and Duff Dog

[@mikebrown1600]

Man you sure get around..yesterday at puddins and today back in the great white north ha ha 😂

[@moremortskerepair4354]

jumped in my private jet

[@daryl3723]

That front end wall hanger was a great idea I hope you get it on your wall very cool. Love your videos.🙂

[@user-ht1xu4gv2u]

That center pumpkin bolts into a c10 rear end changing gears and makes a posi

[@toddjohnston4788]

Getting spoiled with these 2nd channel video's, thanks 😊

[@moremortskerepair4354]

our pleasure!

[@michaelowens772]

Saving small and large pieces of mechanical automotive history…..rock on Mortske! Good stuff!

[@briankottman8274]

Yay for rusty junk! Always interesting what folks have squirreled away and decaying.

[@user-yz7jn2yj2d]

Good job Duff Dog !!!

[@user-yh4zv4sm5g]

I WORKED AT A SALVAGE YARD FOR YEARS AND TRIED ALL SORTS OF AXLE RACKS. RAILROAD TIES STACKED 2 OR 3 HIGH. POUND REBAR THROUGH THEM TO KEEP THEM UPRIGHT. WORKED BEST. ALSO, TAGS ARE GREAT UNTIL THEY GET SUN FADED OR FALL OFF. PAINT MARKER RIGHT ON THE AXLE HELPS.....GOOD LUCK.

[@DougsMessyGarage]

The Nomad dash would probably make a nice wall hanger too. Nice haul.

[@glentucker4250]

Yes Mr Mortske, I think we’d all enjoy a Milwaukee sponsor 🤣 But I’m very happy to see these cars getting rescued for parts and not going to the crusher. Keep up the great work!

[@moremortskerepair4354]

Thanks 👍

[@ThomasSmith-fz6wq]

One man, one dog. Busy all the time.

[@plainbrownwrapper9688]

We used semi truck trailer frame for storing rear axles at the salvage yard i worked at. It worked slick, easy to display, easy to stock and remove, pretty flat heavy steel, and kept them from the ground.

[@francisrizzo1529]

Those mid'70s Coupe De Swilles are perfect to cut the roof off it for the Summer... Also, nice to see someone on LubeTube holding the sawzall against the part they're cutting like you're supposed to...

[@dougbowen4685]

Thanks for saying that. I was beginning to think I was the only one paying attention to t

[@JohnSmith-is8nq]

The only tattoo that ages well is one that says "Mistakes Were Made"

[@thomasceruzzi1871]

No Regerts!

[@garysoykin2783]

The kids use those baking trays for their front-wheel drive cars they go to a parking lot and put them on the rear tires and they spin in circles really easy

[@moremortskerepair4354]

I'll have to look into doing that!

[@chisel_head2001]

Ol' Torque Twister, she was real popular back in High School!

[@stuartfletcher2378]

Every little bit helps , the Nomad lettering and side trim will sell before the saws all cools down and the posi rear ends are still in demand . You also have some stuff the scrap man wants so the gas bill is all looked after . Thanks for the video , its nice to roll along with you and Duff Dog on one of your outings,Till Monday rolls around , Stuart in Canada ..

[@glennnickerson8438]

The circle of life--from one yard to another...😎

[@patrickthemayor2524]

that wagon had to have been beautiful in its day!

[@moremortskerepair4354]

no doubt

[@OKspeedandcustom]

Looks like a tornado hit that place. I ❤ that rollback 😍

[@moremortskerepair4354]

It's even an auto!

[@OKspeedandcustom]

@@moremortskerepair4354 you know how I like an automatic 😘

[@eddiealford3579]

It's always good to get home from work and watch another working man do what I love to do and watch and Hey yep I watch Puddin and Slick 50 as well hmm did some1 get him a nice Ole Chevy dually I would love to have 👍

[@kimberlywilliams9757]

I'm in Branson and someone saw your shirt and he was so excited about it! 😅

[@moremortskerepair4354]

Nice!

[@chrishouse5753]

I remember first coming across your channel during one of these digs in the woods and chopping down trees to get to some cars.

[@StephenViola-ib8dq]

So many people do not believe that there was a 1958 Nomad!!! Thanks for proving again that they are real!!! My uncle had one and my dad had a 60 Nomad!!!!!!!!!!

[@Higgwigg2882]

Duff livin' on the edge! Good lunging action

[@moremortskerepair4354]

always!

[@VorlonFrog]

A bunch of junk never looked so doggoned (Hi Duff!) schweet!!

[@Onedadbuilds]

Bury two poles in the ground 4.5 to 5 ft apart. Auger holes in on an angle and put pipe in. Stack 1 or two axles on each set of pipes. Just build it all in the corner somewhere but make sure you can access both sides

[@kennethsonier1766]

Good evening from Cape Cod 🐋 Dan at DD's speed shop is probably SoMadd you found a 58 nomad 😂 you got yourself some good usable parts from all that. Keep up the good work 👍✌️🇺🇲

[@shannon-852]

Pickin junk, always a good time! As for axle storage, depends how much welding you want to do? Couple of A frames made out of old i beam, set them up on a good pallet and weld some horizontals to them then some stubby arms at about 80° should hold several. Then you can shift them about with the telehandler 👍

[@wanderingweederspapa7878]

That 58 nomad is a keeper... great haul

[@W1se0ldg33zer]

Adding to the pile. A junk pick-up truck bed works to store items in like rear ends - just want to keep them off from the ground. One with a cap or junk station wagons you can store better things in like engine blocks, heads, internal engine parts - things you don't want getting rained on. That Nomad would work at least until perhaps someone wants the glass.

[@W1se0ldg33zer]

You need a section of wall to put up license plates. Ever watch Towtrucker? He has a his 'studio' room absolutely covered in them. I bet you could about do something like that.

[@moremortskerepair4354]

we go right to vans and school busses!

[@W1se0ldg33zer]

@@moremortskerepair4354 Yes! The school bus is the pinnacle of junkyard storage. lol

[@wesleybarrow7356]

More junk on More Mortske Repair! Awesome!🥳

[@moremortskerepair4354]

More to come!

[@garysoykin2783]

Thank you for being on KZbin I enjoy the show a lot will keep watching

[@That70sChannel]

I saw an online argument the other day about Fodo Nomads. The tri-fives were all Tudor (I think) but this video would show that the next gen had four doors.

[@darrinwood3536]

Another great adventure. Thank you for the work on the content!

[@moremortskerepair4354]

Our pleasure!

[@jefferywarburton2116]

If you had two truck beds the same with tailgates you could use the stake pockets to hold them together and store rear axles in that.

[@RJJ6129]

ND Shelter Belt treasure’s, some are best left for the future generations…😂🤷‍♂️

[@dombutler7685]

You got some good junk there!! Hopefully you can flip some for a profit. Thanks Mortske!

[@moremortskerepair4354]

I hope so too!

[@marctorigiani4558]

I saw the hole in the windshield with the rest of the glass looks usable and sellable

[@AndrewHCann]

Excellent video Mortske :) , Chin :) , Duff Dog 🐕,,,. did super well and also got extra Differential gears box and body parts for future videos to with! Also Differential storage rack make like shelfs plus forks like fork lifts have!

[@Coinhunter-km4qo]

Nice score. I would think the Nomad glass and trim would be worth quite a chunk of change.

[@Awsom47Merc]

Bodywork By Mortske 👊😎👍

[@moremortskerepair4354]

dang right!

[@metalmangle]

The Chinster lifting trees like it's nuthin.

[@moremortskerepair4354]

hercules!

[@sweettony9359]

Hey, Puddin' has a bunch of heavy gauge iron he's looking to do something with. Get him to fabricobble up some racks for you.

[@Doggymcdoggy664]

Should make a roadster out the Nomad. No front end. Open engine. Big block. Blower. Find a rad cover and chrome lights . 58 Chevy was actually the 57 . The 57 tri was a rush job. 58 chassis is different to tri chassis. But long term fun project. Maybe 4x4 roadster would be fun. And fast. Cool body shape. Getting collectible now.

[@wastelander89]

I just wanted to say i really been enjoying all the content with you and puddin. Thank you for the fun content mortske

[@moremortskerepair4354]

much appreciated!

[@scotmetzger9405]

These are some of my favorite shows.Just lollygaging🎉, picking up some stuff.Taking a chance, even if you didn't score anything. That's a big deal.It's still fun watching !!!! Thank you for Sharing your day brother peace out!!

[@garybrady9531]

A wreaking yard I worked in we took drill stem welded it up 10 ft tall with arms long enough to put ywo different per arm there was 10 racks lined up per side on each aisle

[@just-in-time6069]

If u want simple rear end watch my uncle use a winch and a large chain extended of piece box tube 2 chains and just made chain loops spaced every foot with one side detachable to wrap around axel tube and just raised and lowered it in the barn ive Seen he just lower it and pull on bottom one and layed right to ground its cheap way and he had is up against back wall and it worked along as remember.

[@playsportfun3356]

I'm picturing 2 12ft 4x6 poles 4ft deep, 8ft exposed. Some horizontal angle iron so to can put a axle on each side. Probably get 10 or 12 on every 2 poles.

[@gregorygibson5455]

Hello Mortske and Duff Dog

[@andrewmcewan8081]

the trays can be a great help ,we used to take them every time we were going to pick anything old up.

[@tomfoust711]

A little bit of everything nice to see Duff,there is still stuff on those cars😊

[@NoWr2Run]

Nice Haul & the RollBack was such a good buy.

[@moremortskerepair4354]

absolutely!

[@user-hl5pu3kh5j]

Get with Puddin!! I'm sure he'd fab you something really nice for those rear ends!!

[@tom-ehill2713]

Dad owned a Nomad wagon. Forgot year.. they really bragged on that thing! Went through plenty of tires I heard!😂😂😂

[@patrickmidiri1543]

Hey Mort, interesting video, You got some great stuff. It’s getting harder to found good used parts. Thanks again, Have a good weekend.

[@moremortskerepair4354]

Thanks! You too!

[@danbentsen]

Rollback looks like it's pretty handy for you. Thanks for vid, good watch

[@moremortskerepair4354]

Sure is!

[@danimal4959]

thanks mortske, looks like a score to me!!!

[@matthewschneider2089]

Dude!!! A day in the life with Duff!!!✌️

[@joehuinker7009]

You are a true Metal Miester building his Metalic Graveyard!

[@jonkitrel6622]

I've heard "posi" used incorrectly so many times for so many years that l do a mental eyeroll even when it's used correctly. Nice haul, Thomas.

[@halharvey3314]

Ok so when you get the caddy running and driving try this. Do a night time drive but let the bumper keep dragging the ground to see how big of a sparking rooster tail you can make.

[@moremortskerepair4354]

lol

[@debcamp2359]

❤Duff and u're road trips!

[@petebovenzi8119]

Duffers havin a good ole time. Yer great dad

[@moremortskerepair4354]

Thanks!

[@peterouellette3874]

You're welcome, Mort

[@richardnelson657]

Good haul! 👍

[@bigbgarage]

Good evening Sir!

[@robertvance1873]

That Wall Hanger will look good Lit up.

[@nateb8245]

I have heard that Gleaner combines are a place to find 292 Chevy inline sixes. Surely you need one of those in inventory.

[@robertvance1873]

It would be cool to see some of those piles running and get some fellas together and have a Mortske Demo Derby Lol 🤣

[@loganboyer8816]

Puddin would probably dig that wagon

[@FreedomRock44]

Fun haul!!!!!

[@shanewright6958]

Another good one 👍👍

[@user-vg9on1dq7f]

Great job sir! Enjoy you guys finding junk cars!

[@tonygiraldes7848]

Just the greatest! 🙂♥️

[@seangallagher455]

You can get conex boxes and put shelves in them for rear ends. Just a thoughf.

[@Wrenchen-with-Darren]

Another good one!

[@darrenhawken9766]

Rescue and salvage parts , on too the next one , waiting for a tractor for you to bring home 😂👍💨💨

[@moremortskerepair4354]

That would be cool

[@darkrose4704]

Mortzke’s the best!!

[@thomaswermager1819]

Hey, kinda cheap GM stuff. Notice I didn’t say junk?! I like the wall hanger idea. Too bad it was in such bad shape and without a frame. Will be interesting to see what is under the hood of that Caddy! Thanks for taking us along !

[@moremortskerepair4354]

My thoughts exactly

[@TheInfamousHotRodFarm]

Hell yeah my brother 🔥

[@williambrinkman2313]

They also had 1958 Impala Nomad, so it had 3 lights.

[@stanleymartin1613]

Cool stuff. Enjoyed watching ✌️ 😎

[@terryeustice5399]

Cool Mortske great video. 💕👊👍💯

[@moremortskerepair4354]

I appreciate it

[@bigw8549]

That Caddy looks like Darnells that Arnie Cunningham drove in the movie Christine.

[@davidcolesr.8628]

Good to See You Gentlemen

[@markmclellon8516]

Mad Max Mortske, the off the road warrior/parked, and Duff Dog.

[@daboenterprize8265]

Cool finds 🎉🎉🎉❤❤❤

[@paulmullins4439]

Great video enjoy watching keep up the great work

[@moremortskerepair4354]

Thanks 👍

[@gerrygwilson2849]

Kool wagon Great Wall hanger

[@gerrygwilson2849]

What happened last week main channel was less than hour lol 😂 are you feeling ok morticus

[@gerrygwilson2849]

I think I’d like to have a rollback maybe a little longer and size bigger I don’t know Hey how much can weight wise it haul ??

[@AaronBrevik]

Ah yes, more schmoo (or whatever DDSS says) with Mortske

[@SuperMAZ007]

Oh my the great dust bowl cousin is back and no joke, these things can be a real pain. I'm sure who ever has to haul the rest of the scrap out will have to do some serious work. Imagine getting anything out from the woods without any power tools any forklift assist. The Scrap haulers of the old days had to do some serious work to earn there money. Good finds not so much the Cadillac. That thing is just shot but maybe it will run?