A quick clip showing exactly how bad my welding is.
Пікірлер: 13
@eggybreadplease4 жыл бұрын
Enjoying your videos, great to see somebody filming their restoration journey. Looking forward to seeing more of your work. Kudos to those that offer solid advice, and ignore the social media trolls that criticise without substance.
@dermotmurray46584 жыл бұрын
Thanks for the encouragement, it really does keep me going.Cheers.
@roverben52514 жыл бұрын
Before you put the body filler in I would run over the repair with a 80 grit disc on a orbital sander paint edge as well fill then light coat of Matt black so when you sand with 80 grit on block it will show the low spots by staying black.block till it fills right then skim with a fine filler for any pin holes in filler. Then block 180 git then again 320 grit then prime hope this helps ben
@dermotmurray46584 жыл бұрын
Thanks for the advice, it's going to be a while before I'm at that stage but I will keep that info in mind.cheers.
@denisbooth96274 жыл бұрын
Hi... Rite here's the script... Why are you listining to people about the welding...... The visual is not important won't ever be seen. And your penatration first class. Remember wheel arches don't carry any weight good tack every 1/2 in be fine. Then a tight skim of fibre fill chopped fibre glass. (waterproof) include over lead. Then skim good body filler to primer. To fit the wheel arch as you have done is brilliant. Difficult arch to fit. Forget every dxxk head. My advice is law 41 years bodyshop owner. Now retired. Well done son your king a first class job.
@dermotmurray46584 жыл бұрын
Cheers Dennis Much appreciate the advice. There will be lots more issues before I'm finished so dont stray away, I need the advice.👍 Cheers, Dermot.
@denisbooth96274 жыл бұрын
@@dermotmurray4658 hi Dermot. Am here to help with any welding or bodywork...
@youngmuttley4 жыл бұрын
Grind the lead out an inch (2.5cm) up the panel, weld up and re-fill with normal filler.
@dermotmurray46584 жыл бұрын
That's great thanks, I was going to remove the lead anyway didn't know if filler would do the trick.Thanks for that.
@mkdave19554 жыл бұрын
Take look fitzee's fabrication videos; a 30 year pro fabricator and bodywork specialist from Nova Scotia. He brilliantly butt welds and fabricates but he still has gaps between the spot welds. He just grinds it back, maybe knocks down the gap or low spot as required re welds and repeats until it’s perfect. So there’s nowt wrong with your welds mate. Best regards, mkdave.
@dermotmurray46584 жыл бұрын
David Thanks for the comments, much appreciated.I have an enforced lay off from the garage for a week or so but hope to be back on it ASAP.