1964 Buick Lesabre! Abandoned for 24 Years?!? Will It Run?!?

This Buick was last legally on the road in 1999. Let's see if we can get the 300 V8 running for the first time in several years. This car has been SOLD!! As always, thanks for watching!
Check out our new and improved Mortske merch site!!
mortske.com/
Join the "Duff Approved!" team to get access to perks like merch discounts, behind the scenes access and more!
/ @mortskerepair
Drop Duff or Mortske a line: [e-mail]
Instagram: / mortske_repair
Ship us things if you wish:
PO Box 1
Gwinner, ND 58040
Tools we use:
Rubber tool mats: amzn.to/34FEw6R
Cyclops shop light: amzn.to/3oKaRAu
Ultrasonic Cleaner 10L: amzn.to/32fwikN
Greta Unapproved Fuel Jug: amzn.to/30R74bt
Noresman drill bits: amzn.to/3CtoYAf
Norseman reamers: amzn.to/3B0YMtH
Spill proof funnel: amzn.to/3BmRMbd
Teslong endoscope: amzn.to/3sxysos
Streamlight Pen Light: amzn.to/3gSe3qA
Zep45 Penetrating Oil: amzn.to/3taR64i
Marine tank: amzn.to/2S6oUmf
12V inline fuel pump: amzn.to/3eHOGVC
1/4NPT to 5/16" hose barb fitting: amzn.to/33qPSYp
5/16" rubber fuel line: amzn.to/2SsLNjZ
Hot Sauce bottle: amzn.to/3u96zmS
Loser switch: amzn.to/3xEuL2s
Milwaukee 3/8" cordless ratchet: amzn.to/3wsHW6a
Milwaukee 1/2" Impact: amzn.to/3xDpzMb
Milwaukee 3/8" stubby impact: amzn.to/3e61pT9
Tekton 3/8" SAE deep impact socket set: amzn.to/332CZDv
3/8" wobble extensions: amzn.to/3nANCXw
GearWrench spark plug socket set: amzn.to/3uutdG9
Smittybilt XRC12 Winch: amzn.to/3eGG2qx
10 Ton Snatch Block: amzn.to/3gO6voI
Ingersoll Rand air hammer: amzn.to/3e7ULLY
Barrina LED Shop Lights: amzn.to/3gWiHDR
Filming equipment we use:
GoPro Hero 8: amzn.to/2PHSU7m
Camera light: amzn.to/2PB2SHp
Handheld camera mount: amzn.to/2QJBWG3
Suction cup mount: amzn.to/3vqC1Nw
Sammich donations gladly accepted on Patreon :
www.patreon.co...
#buick #buicklesabre #mortskerepair #buickcars #secondgen #collectorcar #lsswap #willitrun #lsswaptheworld #hack #roadkill #tires #rims #musclecar #burnout #burnouts #dounuts #donut #brakes #mastercylinder #wiring #diywiring #engineswap #abandoned #ranwhenparked #barnfind #patina #oldjunk #mechanic #rusty #rust #hackmechanic #mousehouse #mice #barnfind #abandonedcar #rustygold #partscar #carbrebuild #carburebuild #camper #campershell #fieldcar #donorcar #deadpaint #patina #abandonedcar #wiring #battery #batterycable #junkyardcar #junkyard #junkyarddog #duffdog #V8 #donuts #burnouts #burnout #hotrod #rusty #automatictransmission #lsswap #ls #lsswaptheworld #project #exhaust #swapped #engineswap #nailhead #buicknailhead

[@dan6341]

I learn something from you every time a watch the show! Ex: to test the coil, light the car on fire!!😂

[@MortskeRepair]

Right on!

[@justinsane7128]

My grandpa was a LeSabre driver, traded every two years as far as I can remember. He wasn't fancy enough for a Cadillac, like my other grandpa.

[@justinsane7128]

😢😢jj😮😮😮😮😮j😊

[@richardphelan8414]

ha ha

[@kimberlywilliams9757]

😅🤣😂

[@JRose-zn7iw]

Came for the cars...stayed for the fire-fighting.

[@MortskeRepair]

Ha

[@Ian-of9oi]

Now I’m intrigued. 30:37 Nothings on fire yet. Watching for smoke.

[@Ian-of9oi]

1:17:25 looks like my barbecue.

[@Ian-of9oi]

1:18:37 one thing I have been meaning to do if fill a 2 liter bottle up with Baking soda. Poor man’s fire extinguisher. Pop the cap and shake it over the flames.

[@marksolheim9690]

Man, Williams and Ree. Holy throwback man. I have a signed t-shirt from them from the brown county fair circa like 1999 when I was wee pup.

[@MortskeRepair]

Collector!

[@lukefeekings4404]

Thank God for Mortske he keeps me sane, and has the only youtube Car Show worth watching, !!!

[@pauldixon9626]

Puddin an Mortske

[@tonyfriend7413]

so is sleeper dude and his wife and 3 children and derrek at vice grip garage..

[@drones4L45]

Yes puddins fab shop and mortske repair

[@Kevin-Murphy-007]

Sleeper dude is really good as well.

[@murrijuana2842]

You sure you're sane?

[@franklinrhodevelt6441]

The uni-points is for setting the dwell. GM set them to get the vehicle running. Then you attach a dwell meter to the coil. Set dwell, then timing, then carburetor. Dwell effects timing, but timing does not effect dwell. Start with the basics to give the engine the best chance of running. Setting points with a feeler gauge, does not always guarantee the proper dwell angle of the points. You can set dwell with the ignition on, and using your loser switch to crank and adjust the dwell. It saves batteries, and starters. Crank, crank, crank.

[@dans_Learning_Curve]

Excellent information!! I'll use it tunning my late father's 1958 Plymouth Suburban. If you're interested in following along, playlist on my channel.

[@dave1135]

Good info. I started working on cars in the mid 80s when fuel injection and computer control was starting to appear on cars but as a driveability technician at my gm dealership I did my share of work on carburetor and points ignition cars.

[@MrNougat]

@1:23:00, first start after the fire, I'm watching some loose sparking just below the carb near the valve cover on the left side.

[@karlrussell6765]

I thought I was the only one who watched the videos that closely. I saw that as well. Could be the source of the miss.

[@VorlonFrog]

This episode of Mortske Repair has been brought to you by Mortske Low Life, the bongwater of bottled beer. But seriously, today's episode has it all: crappy starter, dead jumper pack, burnt coil, exhaust cut-off, and real flames on top. How could you NOT enjoy it?!?

[@Daddyrabbit_2]

And attacking spiders to scare the shit out of someone with arachnidphobia(probably wrong spelling)

[@nickelnoserestos2598]

Buick's are awesome and you should feel HUMBLE to work on it's greatness.. Love love love the Lesabre! Nice!

[@hanknipper3921]

Duff always looks so happy to go on a R I D E! Great video

[@NoWr2Run]

DAG'S LOVE RIDES, 100%. HELL YOU CAN'T EVEN SAY THE WORD, THEY GO KRAZY, LOL.

[@mgbreis8506]

Buick 300 is basically an iron block version of a BOP aluminum 215. You can build a stroker with an aluminum block using the 300 crank. Really makes an mgb haul the mail!

[@MortskeRepair]

Good to know!

[@richardbates2367]

Always wanted to build a 300 Buick V8 or put a Buick ultra high compression 215 aluminum V8 in a grey 86 Buick regal V8 sport coupe I had so I could harvest the oldsmobile 307 roller cam V8 for a cutlass I had at the time of well most of that didn't happen except the oldsmobile 307 was the thermostat I had that came apart and pretty much trashed the oldsmobile 307 the thermostat stuck open the water pump stopped turning,blew the top and bottom radiator hoses spewed hot antifreeze all over the front of the regal and removed paint off the fenders and core support, and replaced the water pump, thermostat, radiator hoses and it started puffing white smoke and starting to rattle at idle... Turns out it cracked both heads in front and in the middle of the head holes 1,2,5,4 block and cam and crank was fine rattle was the middle bearings on the 5 and 4 cylinder pistons starting to spin on the crank so I pulled it and put it on a engine stand then the engine stand got borrowed from there the oldsmobile 307 got sat behind a recliner chair in the garage and my younger brother gave it to a buddy for parts I was not happy, anyways I ended up putting a 79 oldsmobile 350 quadrajet intake on a set of 75 olds c heads on a diesel oldsmobile 350 in the regal and it would run lol!!

[@paulriggers1558]

that was a good fire, even better than puddins... we had very few V8s in UK, the most common one was an ex buick 3.5l with alloy block, heads, + manifold. we called it the rover V8...

[@WesWants]

You know, Mortske Repair to me is like your favorite tv show you raced home to watch on Monday nights after school or work. Thank you for another great show!! Hey, just a thought but I think you interviewing your dad on his interest in cars and what his first thoughts were after the LS swap on his Buick were would be awesome.....his real thoughts. Anyway, Thank you Mortske and Thank you Duff!!

[@MortskeRepair]

Thanks for the kind words!

[@wakingdumasses7194]

I only watch for the duff monster hes a awesome puppy

[@cwagenaar5080]

Between the Williams and Ree reference and you and Pookie’s 10 minute Midwest Goodbye, you’ve reached peak Dakotas. Makes me homesick.

[@grantkoeller8911]

This is a top of the line full size luxury car, so incredible how big these cars were, like a gigantic land barge.

[@NoWr2Run]

Honestly Sir Mortske I was kind of baffled that you never pulled the Carb. & tightened the lose base down. HELL, Even PUDDIN WOULD HAVE DONE THAT, LMAO. Actually I can see Duff in the background shaking his head, " TIGHTEN THE BASE DOWN ". All the while keeping 1 eye on the gas pump that the critter was hiding behind, GOOD DAG HE IS.

[@michiganbushcraft975]

I read that 1963 was the last year for the aluminum heads. Buick probably had some left to use up. That was the lightest production V-8 at that time.

[@MortskeRepair]

sweet!

[@anniewilliams6002]

My cousin talked me into subscribing to this channel, said lt was relatable, I'm glad she did because it is relatable to the things in my life and it's very entertaining as well!

[@MortskeRepair]

Welcome aboard

[@TheClavo223]

You never disappoint brother ... the Look on Duff Dogs face is priceless He sure loves his life 👍🏻

[@Cat-Privilege]

My Dad had one of those when I was a kid, baby blue with a dark blue interior. I remember as a little kid sleeping in the back package tray when we traveled to the Black Hills is South Dakota. Thanks for the memories.

[@MortskeRepair]

Good stuff

[@c0c0asauce]

This car might be the most interesting car you have picked up for the channel. Probably the best deal price wise too. Its not a popular car but its unique and it delivers everything that a car of that period should. Wouldn't feel bad about hot roding it either.

[@bud8872]

Dig the topper, love that it keeps things dry and somewhat secure. Maybe do a shirt to help out the museum, just a thought.

[@craigbowley6783]

That topper actually looks pretty cool on the cowboy Cadillac 👌

[@MortskeRepair]

not bad!

[@garysoykin2783]

That’s cool that you help out the old farts at the local museum. You’re a good guy.

[@MortskeRepair]

I try

[@iHap]

She may be cracked, wracked, and rusted; but she’s all there-and she’s a Buick! A Rock Auto fuel tank, Macco paint job, and Midas exhaust puts her right into the looks ok from ten feet away class. Definitely Duff approved! The spider never bothers me-but when you hit your head on the hood I immediately felt it (because I’ve done it-ouch, that one hurt!). Thanks for the work you do for us, and always, always; Love The Duff!

[@MortskeRepair]

our pleasure!

[@markhyden2321]

Woo Hoo Another Mortske Fire! Glad you didn’t lose the shop!

[@MortskeRepair]

Me too!

[@user-no7gw2mb1c]

My first car was a 1964 Le Sabre. A very similar car that you have. I enjoyed watching as it brought back memories. I learned to perform tune ups and brake service on that machine. As I.recall the transmission kick-gown was electric with a switch incorporated into the accelerator pedal that actuated when the car was floored. Thanks for the video.

[@MortskeRepair]

Good times!

[@greggibbs5742]

I had a 1966 GS, 401 with the Riv dual quad set up. 2 speed trans with 4.11 posi . t had the Buick 5 spoke rally wheels. Loved that car!

[@Dirt-Broke-Garage]

Loved the Williams and Ree reference took me backj to my younger days. I remember watching them at the Ramkota in Pierre and several ties at the SD state fair.

[@doyleb4826]

I'm not really a GM guy but I have to admit that the Buicks from 1960 to 1970 were the best looking cars!! That's my opinion. Another great video by the way!

[@MortskeRepair]

glad you enjoyed it!

[@JohnSmith-is8nq]

I agree. Very, very elegant, sharp designs. I think these cars might have influenced european car makers in their later designs.

[@ant8851]

If I tried driving something like that on the roads in Australia I'd get picked up, beat up and locked up for sure. Great video Morske.

[@IronArmPanda]

She was definitely a drive-in cruiser, those seats have seen unspeakable things 😂.

[@MortskeRepair]

No comment

[@twobeards6714]

I've got a 74 Catalina ... There's a hide a bed in the back and five sets of golf clubs in the trunk.

[@RockyRaccoonsdead]

Kind of like the Station Wagon I had with Foot prints on the inside of the Rear Roof :)

[@MortskeRepair]

@@RockyRaccoonsdead bahaha!

[@ironcladranchandforge7292]

Stop it !! You're making me miss my 1964 Chevy Nova I had back in the 70's during high-school. It was a two door, but the back seat was comfortable....... Oh those were the days!!

[@roadmaster92]

Wow glad you didn't get burned . Great job on getting that Buick running. Can't wait till you make another exciting video.

[@MortskeRepair]

You and me both!

[@jontaylor1652]

Another model I'm not familiar with, I bet they were very smart cars in their day. This is an awesome channel, I could watch it all day. Thanks for another great post Mort.

[@MortskeRepair]

Thanks for the kind words!

[@bobbylong9001]

That out cold reference with Pig pen was great. Solid movie 🍻

[@MortskeRepair]

Dang right

[@SuperMAZ007]

Definitely the fire helped to clear the intake from all the mouse crap that was on it. I can't imagine how you can break or get the base of the carburetor so lose? I think the Minnesota rust got to the car other wise it is decent. Very much enjoyed the entire content of the video.

[@dave1135]

It's a common problem on those gm carbs with the separate base plate. The gasket is a thick cardboard type material to act as a heat sink. As the car sits thru the years, the gasket dries out and shrinks, causing the bolts to loosen.

[@72Vw1302]

Dang you and Dylan McCool both putting out 64 lesabre videos. Awesome

[@southernshooter]

Once you get the carb sorted out it will probably be a good runner. Don't see any blowby. I am an oldy so I lived and breathed breaker points. It was a great time when HEI ignition came out. So many issues went away.

[@grantkoeller8911]

The topper is so great !!!! It looks right out of a 1982 science fiction movie!!!!!!!

[@johnsommerfeld6889]

It's been a while since you've had a good fire!! I was expecting a scream or something but you kept your cool. Thanks for the video, always entertaining!

[@MortskeRepair]

No use in getting excited!

[@johnsommerfeld6889]

@@MortskeRepair That's true!

[@caroledunne2667]

That fire really worried me! It lasted for so long! And you were right there in it! Suppose it exploded!

[@charleykeenan6171]

Loads of great parts there for an old school hot rod. And that engine is a great fit for old English roadster builds. Enjoyed hearing the update on the museum as well. Very cool episode! Thanks for letting us hang out.. oh, and if the Amish can move a building, so can you.. 😂

[@Mik35959]

Haven’t watched yet but I’m planning on doing a shot everytime you say easy peasy lemon squeezy. I hope I’m conscious by the end. 1:45 I better get the big bottle

[@danssmokintreasures]

HOLY FIRE Mortske. You know Puddin is going to get on ya about that one and great video man. I like low profile hats too.

[@albertherr6951]

my father was big into buicks .he had a 1965 buick skylark 340 nailhead 4 speed posi rear he ordered it new from the factory sold it when i was a kid in the late 70s..and thank you for the hat

[@MortskeRepair]

Sweet

[@timmccluskey8315]

Trans pan and modulator location sure looks like a THM 400. They were available in 1964 full size Buicks.

[@richardbates2367]

That makes sense because someone's comments about their kickdown in one of those cars is wired to switch on the accelerator pedal to a wire on the firewall running down to the transmission... That is how kickdown switch is wired for a th 400 turbo I've fixed several of them on gm square body trucks usually the c20 and the 4x4 one's..

[@hq308]

I came to make the same comment, it’s a TH400 for sure.

[@campbecw]

Moving a building… definitely a great 2nd channel idea.🎉

[@MortskeRepair]

stay tuned!

[@2509498788]

Always good content... I look forward to watching your shows..

[@PapiDoesIt]

It's almost guaranteed there will be starter issues or a fire. This video has both!

[@MortskeRepair]

@@PapiDoesIt double whammy!

[@Hanky_Bannist8r]

After today and past events you really need a handy dandy Mortske Fire Extinguisher.

[@waltdenis9621]

Always a pleasure! Great content! Well done!

[@seangill7985]

That topper is GOOD, gotta love period correct useful accessories! Old toppers make great storage sheds out of pickup beds!

[@MortskeRepair]

Totally!

[@tonygiraldes7848]

Always great to see what new adventures you’re up to 😊 just be careful not to get hurt 👍

[@tonygiraldes7848]

Now that I’ve watched it all the way thru I hope I didn’t jinx you with the warning 😐

[@jkennedy5150]

Best kind of fishing to me... All the city water holes around here so dry. Your lucky to have access.

[@MortskeRepair]

It sure is

[@groundhog8148]

Only at Mortske repair does a person put a gas fire out with water 😂

[@anniewilliams6002]

Water just goes under the fire and makes it spread. 😅

[@bawns9416]

Greetings from the UK and pleased to see another great video Mortske… and no snow

[@demolitionsexpert]

That fire/thermal incident is probably worth working into the channel intro. Def a youtube short. Maybe even a Mortske thermal incident "best of" video

[@qwiked]

Another great rescue, especially liked the fire part…I had new 70 Buick GS 455 convertible. 13.85 qtr mile times on oem tires. Won a number of street races, nobody knew what it was.

[@MortskeRepair]

I hope you kept it!

[@davidmcginnis2075]

"YES" the legendary 455 that was in Buick, Oldsmobile and Pontiac, great engine.

[@davidmcginnis2075]

Course they're all under General Motors.

[@erictate8986]

Mortake Repair Friend great job on getting the Classic Buick up and running again, she just needs some TLC 🇺🇸🇺🇸🇺🇸😃😃💪💪💪👍👍👍👍👍

[@MortskeRepair]

Right on

[@jimrobin98]

you still did get it running! That says a lot about you for not giving up!

[@grantkoeller8911]

Our family car was a brand new 1974 Buick Century Regal 4 door in beautiful Maroon color. Same car that KOJACK drove on his TV show.

[@terryfralick1465]

I had a 64 Buick La Sabre1974, when I was at Technician school learning to be a jet engine Technician for the USAF.

[@danieljohnson5162]

Whatever you are using for videos is exceptionally clear very good quality. Love your vids buddy keep up the good work.

[@russkester7006]

Brings back old memories. I took 7th place in a demo derby with a very straight 64 Buick identical to yours. Air even worked.

[@MortskeRepair]

good stuff!

[@Philobeddoe12]

I always enjoy it when you hang around with Pookie.

[@reallyoldtom9352]

The canopy looks great! If you take it off you'll be kicking your own ass when the time comes that you need it. Seriously the canopy looks like it was made for it. Tom in Idaho

[@MortskeRepair]

never heard a topper called a canopy!

[@waynedavis7245]

Damn Mortske, trying to burn down the shop? What was that sweet old truck beside the Buick?

[@billoc1255]

Duff told me those new roach clips are the cats ME-OW ! Grateful for all your efforts. I honestly get a smile when I get an alert about either channel !

[@MortskeRepair]

glad to hear it!

[@brucevallee5623]

I believe the "Mortske flick" will be immortalized in our history books and may even get a display in the rebuilt museum. I see everybody using it these days.

[@MortskeRepair]

Hahaha

[@W1se0ldg33zer]

That's an early entry into the brougham era -- a big luxury car ride for a cheap price. I had a '75 LeSabre for about two weeks - gigantic car. It was all good but just not me. My mother had a '95 Century -- that car is probably one of the most solidly-built high quality car GM ever made. Was a grannies car but man that thing was bullet-proof.

[@bennyhelgeson401]

A friend of mine's Dad always drove Buicks. Best feature was huge trunks for sneaking into drive-in theater.

[@MortskeRepair]

Good times

[@BruceLautenschlager]

So happy to see your firemaking skills have not diminished. You'd make a fine Eagle Scout.

[@aaronerickson7739]

I use to sneak out my dads 64 Rivera and go cruising around. I miss that old car.

[@AnthonyRBlacker]

That topper looks SO nice on the square body Mortske!! You can fix up the latches and seals and all that.. man it looks SO good on there! What a SCORE for 25 beans!! Can't ever find a deal like that over in the crap state I live in (NJ) yuck.. I can't WAIT to finally retire and get the heck out of here!

[@MortskeRepair]

Right on

[@user-sr3jm1je4n]

I watched every one even vehicle's I don't and learned something from all of them thank you Mortske

[@MortskeRepair]

Our pleasure

[@user-sr3jm1je4n]

@@MortskeRepair wandering what happened with your next episode for 64 Buick Lasabre

[@MortskeRepair]

there never was going to be a second one@@user-sr3jm1je4n

[@rustyredemptions]

Cool video as usual! When I was a kid my parents had a '64 Buick Wildcat 4 door hardtop, very similar to this one. Was a great car! And the used car warranty I use: Once you drive it off the lot, if it falls in half, both halves are yours.

[@MortskeRepair]

Right on

[@thomasmadden2258]

Cars hard come by these days

[@maladios_2912]

Drove by your shop today! Was hauling John Deere equipment west. I haul equipment out of the town east of your shop pretty often. Keep up the good work.

[@MortskeRepair]

I waved when you honked!

[@juliegardner1600]

Always happy to see you on Monday. Audio was much better on your drive...I usually have a hard time making out what you are saying but today was good. 😊

[@MortskeRepair]

appreciate feedback!

[@jesterr7133]

The little Delaney Brothers truck in the background is cool. You should do that one at some point. It has some character.

[@MortskeRepair]

Stay tuned

[@stumpy2816]

Enjoyed the video. I once had a 72 Buick. Believe it was Electra 225 4 door hard top with a 455 eng. What a ride!!

[@MortskeRepair]

Very cool!

[@spencerrobinson2719]

That topper looks so good on the cowboy caddy! If it were mine, I would leave it on! Fix the latches, figure out a gasket for the hatch and everything inside is dry and safe

[@jeffryblackmon4846]

The techs at Walmart in my town wear nifty white bump hats. You might consider wearing one with Mortske stickers all over it. I felt your pain when you connected with that bonnet. @ 48 minutes and it's a fine video.

[@DarkFlamage]

Before unit points, there was no way to adjust the dwell angle while the engine was operating. Set point gap @ 19 degrees. Slide up door in Dist. cap & insert allen wrench into cap screw head, connect dwell gauge. Start engine. With the engine running adjust points to the proper setting on dwell gauge.

[@cirogiacomino]

Hey Mortske, Great Auto Repair Videos! I loved your Buick LeSabre revival! I owned a 1974 Buick Riviera GS 455 V8 Was constantly changing Starters , Alternators& Changed out a Carburetor in the parking lot of Auto Parts Store. Anyway you could work on those cars plenty of room! Got only 8-10 miles a gallon! Keep up the Great Videos! ….IKE , Charleston,SC

[@MortskeRepair]

Very cool!

[@deathguild4689]

This Boys and Girls is why Mortske is NOT aloud to play with FIRE!!!

[@corvettejohn4507]

The 1964 Buick 300 was the only year that had aluminum heads. It was basically an overgrown Buick 215 V8 with an iron block. 1964 Buick 300's are great engines to drop into a Vega, Monza, or Luv truck because they are quite a bit lighter than a SBC and have the distributor in the front. IIRC, the plunger on the side of the carb is an electric switch for the trans switch pitch torque converter. 1964 was the first year for the Super Turbine 300 trans.

[@MortskeRepair]

Interesting!

[@gabbi47karason]

that intake catching on firew should make it into the intro! Also who hasnt light a dizzy or 2 on fire to dry them.. I've also exploded about 7 coils, all on the same car, most of them over one evening, don't leave your coil hooked up if you have it hotwired but hey, learn from a mistake or 7 ..

[@corydriver7634]

😂

[@clydepodvin5026]

Mortske Monday what can go wrong will go wrong. Banged your head on the hood then caught the engine on fire. LOL 😆. Great video in all.

[@MortskeRepair]

good times!

[@tom-ehill2713]

Awesome day!! Thank you Thomas-😎

[@MortskeRepair]

Any time!

[@Bo-Dog]

Dang Morty sparked up a fire😅! Glad you didn't burn down the shop. Good video; I love me some ole Buicks👍.

[@jrbnomadiccontentcreations8548]

camper shell flows awsome with the truck.. shes a keeper in my eyes.

[@erictate8986]

And always good seeing the dog Duff too 🇺🇸🇺🇸🇺🇸😃😃💪💪👍👍👍👍👍

[@dieterlange7581]

I have never bought anything but I'm a die hard Mortske fan and always watch till the end. I am tempted to get a magnetic koosy. 👍🍺💯🇺🇸

[@northidahoguy5549]

We had a ‘64 Buick, LeSabre when I was a kid with a 355 Wildcat, which was the 300 with a four barrel and I believe it had aluminum heads also.

[@frankm8533]

When it caught fire I was looking for Ralphy 'I'm in danger' 😂

[@MortskeRepair]

missed opportunity!

[@EarlwithanE]

Another Mortske classic…..enfuego!!! 🔥🔥🔥

[@michaelowens772]

Another stellar episode, your content takes me back to garage days of yesteryear! Thanks Mortske !

[@MortskeRepair]

My pleasure!

[@tomboone201]

Had a 63 like that one, my 65 special drop top was a blast .. all back in the 80's when I was in my 20's both fun cars

[@nelsonannett5427]

dad had a 80s buick lasabre for cab for many years was a good car all the Buicks were great. good time. cheers morts.

[@puddleduckist]

Cool, another buick!!! Another land yacht saved 🎉🎉!!! Same motor in my dad's 65 convertible skylark. Swapped for a 5.3 LS and overdrive! Your 💯 correct the 310 is the tq rating!!! She's quite chewy!!! Man, that fire was nuts, for as long as it burned I'm surprised it didn't melt the plug wires n do more damage. Fireman mortske to the rescue!!! I have a fremont built rust free 69 gto I've owned 31 yrs, 455 th400. Lots of goodies, asking 30k if interested!

[@MortskeRepair]

Very cool!

[@genuineworkinghands]

I had a 1965 Buick Special 4dr when I was in high school ('96--'97). Sometime in the 80's it was rear ended and repaired with the long Skylark taillights. It was my second car. I paid $500 for it. it had the factory 300 with the 2 speed power glide. I drove it for a week, turned a corner one night doing a one wheel peel and the engine started knocking. I drove it home and noticed sparks coming from the starter area. the flex plate was cutting the nose of the starter. I had broken the crank in the last journal. it broke on an angle so it still started and ran, but the end of the crank wobbled enough for the flex plate to cut the starter. My dad and I yanked it out and put a 350 Chevy and a Saginaw 4 speed in it. I shaved the rear door handles and painted it. It looked pretty decent.

[@MortskeRepair]

That's impressive!

[@shelad]

My dad had a 64 lesabre. Same engine but with a 3 speed auto. Blue 2 door, but the same looking rust all over. Ran excellent.