MOSFET: Common Source amplifier with diode connected load

  Рет қаралды 31,775

techgurukula

techgurukula

Күн бұрын

common source amplifier with diode connected load is analyzed with diode connected mosfet discussed at first.

Пікірлер: 24
@saqihere
@saqihere 9 ай бұрын
What A Phenomenal Educator 🤞
@arun65394
@arun65394 4 жыл бұрын
This video cleared my doubts...Thanks alot sir...
@qemmm11
@qemmm11 7 ай бұрын
Much appreciated sir 😊 I don't understand it why id _vds curve ! Sir, please Q: How to draw Dmos _n, Dmos_p vth in id_vds curve and Emos_p,Emos_n vth in id_vds curve 🤔
@sarahhtk9754
@sarahhtk9754 Жыл бұрын
Thank you very much! Very fast and accurate and informative video!
@ZayMeisters
@ZayMeisters 7 ай бұрын
How does the analysis change if there is a resistor between the drain and gate? Now we can't equate Vds to Vgs right?
@abhijithanilkumar4959
@abhijithanilkumar4959 4 жыл бұрын
Dhanyavaad gurudev
@srishtisingh1688
@srishtisingh1688 2 жыл бұрын
Can a pmos be used in place on nmos? And what is advantage of using a nmos over pmos in diode load? Please explain
@chung_myung.
@chung_myung. 2 жыл бұрын
1. Yes 2. Bcz nmos is faster (electrons) and of low cost also a reson
@romim9928
@romim9928 5 жыл бұрын
Plz complete this
@techgurukula
@techgurukula 5 жыл бұрын
Hi Romi, I'll be completing this course, theory videos will start coming from this Sunday onwards.
@romim9928
@romim9928 5 жыл бұрын
thanku so much Sir
@hasanabbas32mirza
@hasanabbas32mirza Жыл бұрын
y at 6:25 vdd as zero small signal model
@utkaaaaa
@utkaaaaa 5 жыл бұрын
Since fet is a symmetrical device, so connecting G and S should be similar to connecting G and D ?
@techgurukula
@techgurukula 5 жыл бұрын
FET is symmetric device - source and drain can be used interchangeably. But, once you plug in the MOSFET in the biasing voltages, for nMOS which ever side is of lower potential that side is Source and the other side (at higher potential) is Drain - now source and drain terminals are fixed. Hope that clears. Let me know if you still have question. - Techgurukula.
@utkaaaaa
@utkaaaaa 5 жыл бұрын
@@techgurukula Yes it is clear now. I was thinking the same too. Thank you!
@techgurukula
@techgurukula 5 жыл бұрын
Good to know.
@syedsulaiman8380
@syedsulaiman8380 2 жыл бұрын
can't thank you enough sir
@DiegoDiaz-ir4nd
@DiegoDiaz-ir4nd 4 жыл бұрын
What if the bulk of the "diode" is connected to ground?
@itzels.9473
@itzels.9473 4 жыл бұрын
Good question
@abhijithanilkumar4959
@abhijithanilkumar4959 4 жыл бұрын
The body by default is connected to source If you change that everything is gonna change
@jotardz8250
@jotardz8250 2 жыл бұрын
Thank you
@SuperSaltyFries
@SuperSaltyFries 3 жыл бұрын
Great video, thanks so much!
@bbalatripurasundari2442
@bbalatripurasundari2442 3 жыл бұрын
Great 👍
@skrgamer8862
@skrgamer8862 4 жыл бұрын
Tnq sir
MOSFET: Common Source amplifier with triode load
7:46
techgurukula
Рет қаралды 10 М.
MOSFET: Common Source amplifier with resistive load
16:16
techgurukula
Рет қаралды 56 М.
The Joker kisses Harley Quinn underwater!#Harley Quinn #joker
00:49
Harley Quinn with the Joker
Рет қаралды 42 МЛН
Dad gives best memory keeper
01:00
Justin Flom
Рет қаралды 20 МЛН
MOSFET: Common Source Amplifier with current source as load
8:21
techgurukula
Рет қаралды 24 М.
MOSFET Common Gate Amplifier
11:56
Jordan Louis Edmunds
Рет қаралды 58 М.
L9-5 Diode Connected MOSFET
10:11
Introduction to Quantum Computing
Рет қаралды 2,9 М.
Small Signal Amplifiers
57:53
Vocademy - Electronics Technology
Рет қаралды 356 М.
Common Drain Amplifier Explained
11:35
Jordan Louis Edmunds
Рет қаралды 59 М.
MOSFET: Common Drain Stage - Amplifier
8:04
techgurukula
Рет қаралды 13 М.