Mossberg Shockwave Upgrades‼️

[@channell11]

Really cool setup. For those looking to do this, be careful. The Shockwave gets around ATF rules by its very specific construction which classifies it as a "firearm" and not a short-barreled shotgun. By removing the raptor grip and putting that stock on there that exception no longer applies and it becomes illegal unless you do the paperwork and steps to register it with the ATF as an SBS.

[@jaybee6505]

Not when you use the stabilizing brace like he did.

[@MrMillerlite7169]

Since when?

[@RevJimmy69]

Same as with the ar pistols.

[@tomfox9880]

@@jaybee6505 Well seeing as braces are illegal now and classify this as an SBS, he is right technically. Just because of the new ruling by the ATF

[@thomasknapp7236]

​@jaybee6505 it's illegal. You cannot modify the shockwave. It's not a pistol. Therfore you cannot use a pistol brace. Believe me. I've been over this a million times. I did this same modification. I've talked to multiple firearms dealers.

[@smoothoperator137]

That is hands down the best shockwave build I have ever seen for sure.

[@MrCMR901]

Much appreciated, thx for watching ‼️💯

[@MrCMR901]

Mentioned it just a tad bit, definitely could’ve talked about it more tho

[@MrCMR901]

Much appreciated 🤙🏾

[@MrCMR901]

Check description

[@anthonysmith1831]

I'm a retired black veteran Veti nam. If the tunnel rats 🐀- & L.u.r.p.s would have been good to have this weapon- its very interesting

[@jamesleasure8836]

Absolutely the sweetest Shockwave I've ever seen, and it's now the template on how I want to build one out. Thanks!

[@MrCMR901]

Thx for watching 🤝🏾🫡

[@MSM4U2POM]

Love the combined foreend/flashlight - very slick use of available space. Great piece of kit.

[@MrCMR901]

Thx for watching

[@MSM4U2POM]

@@MrCMR901 Thanks for the vid. Take care, and be safe.

[@VariedadesFIFO]

I do have the same shotgun at home and I can say that I LOVE MY MOSSBERG SHOCKWAVE 590, I made a few modifications to it and now it is a piece of art!!!

[@ajtrek3873]

Great review! I used the same SBM-4 components and Crimson Trace Laser saddle (Green Laser). For the ammo holder I went a GG&G Model GGG-2001 5 shell holder with a forward slant position. My light is a Crimson Trace CWL-202 900 lumens fixed to the under barrel toward the front (on the right side) attached via Picatinny and GG&G Mossberg light mount. Last; but not least. I switched out the stock upper barrel with a Mossberg 22 hole ported barrel with fiber optic site to reduce recoil.

[@rd9219]

I LOVE ❤️ seeing people exercise their 2A RIGHTS!!!!

[@tommysalami5016]

The SHOCKWAVE is like a sledgehammer. You have turned into THORS HAMMER. Sweet setup.

[@Joe_Karably]

You are the man. I was planning on shelling out for a Black Aces Quad Rail but I really love your setup’s simplicity while still improving on the Shockwave’s overall design. I’m sold.

[@MrCMR901]

Thx for watching ‼️💯

[@1997LT1Camaro]

The quality difference between the Mossberg shockwave, and the black aces is a big difference. Mossberg’s build quality is way above. I own both, and the black aces barrel is way thinner along with the receiver.

[@jacobchandler3443]

Best shockwave build I’ve seen.

[@parradobusiness]

Best 590 I’ve seen. Best practical set up.

[@MrCMR901]

Much appreciated, thx for watching 💯

[@DGKonkrete]

This easily the dopest shockwave build ive seen by a mile

[@MrCMR901]

Much appreciated, thx for watching 🤙🏾

[@jimmycecil1287]

Best shockwave build I've seen yet. Very nice upgrades.

[@MrCMR901]

Thx for watching 💯

[@reginaldpeek7209]

Agreed!!!!

[@GenXorcist76]

The ATI works really well on the Springfield Saint

[@darrenpokorski7756]

I kid you not my friend, I was JUST LITERALLY looking for ShockWave upgrade. Thank You!!!!!!$

[@MrCMR901]

Glad I could help💯🤙🏽

[@dayaninikhaton]

Good stuff. I may consider that forend. Protip: I have that same ATI sidesaddle on mine, and you can actually hold two mini shells in each loop. Up and down with no fear of them coming out.

[@jeffadams9807]

A Bad-Ass Set-Up U Got There Bro, Great Video...

[@mooseoxtank]

Excellent video, I just got my 590c Shockwave today, now I have goals.

[@TheMainMan.]

Just got my wave. This is exactly what I have in mind for mine. Great build with bolt on parts.

[@WolfNRaven]

@@TheMainMan. Let me know if you find the kit. I couldn't find it anywhere

[@paulalpine5910]

Good firearm for an intruder type of defense Idk bout all of the extras if some of these are legal in all state's!? Above all what a great t-shirt that's what caught my eyes as a true believer ✌️

[@jamesleasure8836]

That's an excellent setup! Best Shockwave I've seen!

[@youcanthandlethetruth6976]

I made a strap for my hand out of paracord that goes on the bird's head grip on the shockwave and that's all I put on it. I bring my shockwave to a cheek position with the bird grip, and I'm able to shoot with little recoil and very accurately and very safely. I don't tilt my head over the bead sight, so there's no risk of the shotgun bucking me in the face or anything, it just slides along my thumb pressed against my cheek.

[@MrCMR901]

Never thought about that. Nice ingenuity ‼️💯

[@LJ-eb7qt]

Did it up right. Appreciate showing the boxes of the add ons.

[@antdjones05]

One of my favorite 🤩 broomsticks. I’ve done sum upgrades to mine but I see I have a ways to go! Nice shockwave bruh!

[@MrCMR901]

💯💪🏽

[@woodlandreconjoshdrakes5509]

Those mini shells changed my whole outlook on the shockwave. Added a brace and light. Got one for my vehicle and bedside now

[@WolfNRaven]

@@woodlandreconjoshdrakes5509 where can I get this brace? I can't find it anywhere. Thank you

[@User-zl9pj]

@@WolfNRavenwhat is that pointy thing at the end of it ?

[@WolfNRaven]

@@User-zl9pj looks like a different cap for the magazine tube.

[@herbderbler1585]

The minishells and the shortie 12 gauge firearms are a match made in heaven. 8+1 capacity in a small maneuverable package, kicks like a 20 gauge.

[@allthingsandmore4613]

Just curious, I bought one, I heard you can't put a stock on it like that. Is that true?

[@herbderbler1585]

@@allthingsandmore4613 correct, installing a shoulder stock makes it no longer a "firearm." It's now legitimately classified as a shotgun with less than 18" barrel, which is a felony if not registered and tax stamped. There is some debate about whether you can install a brace on guns like the Shockwave and Tac-14. Theoretically it should be no different than installing a brace on an AR-pistol. Unfortunately pretty much all shotguns live in a weird murky territory according to US gun laws. The idea of a braced "firearm" isn't necessarily illegal (at the moment, though the ATF really wants braces to be banned) but the fact that you altered the firearm from its manufactured state with the bird's head grip could be reason enough to declare it no longer a "firearm" and get you in trouble, even if it still meets all the same criteria it did before. If you think this is stupid, you're right. It's exactly as stupid as you think it is. However, you must consider how much you are willing to risk the whims of some overzealous alphabet bois looking to bully law abiding citizens because it's an easier way to justify their existence than going after actual criminals. Is it really worth the trouble just to have an extra cool shortie scattergun instead of just buying one with an 18" barrel that you know you can put against your shoulder with no legal consequences? I am not a lawyer, I offer no legal advice and I offer no suggestions about what you should do with your gun. I'm merely pointing out the nonsense that is US gun law and the tendency of federal agencies to "interpret" a citizen's actions in the most damning and least charitable way possible.

[@channell11]

@@herbderbler1585 Definitely not something you want to chance since the Shockwave was constructed in a very specific manner to just barely skirt ATF definitions to not be called a shotgun. If you ran into a situation where you had to use it you'd definitely not want to have to try to cook up an argument as to the legality of the weapon you're using on top of whether you were justified or not.

[@Tommy_Corn]

i love it, everything about it is practical and bad af. i like how it still have the handguard strap and you found a way to incorporate it all together with no baggage. i might get another shockwave but i never had the first one sbr like that. i recently purchased a black aces shockwave that had the ejection port widened but yet to shoot it. ive been thinking about another pump

[@mbaroneva76]

This is phenomenal. Just got my shockwave 590s and pretty much plan to steal your build, lol. No heat shield is fine, plan to run a rail and red dot. Nice setup 👍

[@MrCMR901]

Much appreciated 🙏🏾

[@BrianBlairTV]

nicely done! one of the best Shockwaves I've seen!

[@martinspick]

I really love your setup’s simplicity while still improving on the Shockwave’s overall design.

[@MrCMR901]

Thx for watching

[@chipedwards8868]

That is the best shockwave- by far -I ever seen- I didn’t know that you put a brace on a 14” barrel - I love it - thanks for sharing 👍🏻👏🏻

[@MrCMR901]

Thx for watching ‼️

[@frankevans6584]

A very very good and through reveal of your shockwave. I’m gonna forward this video to my son for some upgrade ideas. You’ve just earned a new sub

[@MrCMR901]

Much appreciated, thx for watching 🙏🏾

[@calebharrell5487]

Amazing gun and dope shirt, I’ll be adding many of these to my new shockwave. Thanks for sharing this set up

[@calebharrell5487]

Do you know how much overall it costed from the stock gun to get where you are at?

[@MrCMR901]

You’ll love it . Thx for watching ‼️

[@VanXHydrA]

I love that heat shield with the sights built into it!! Wicked badass!

[@MrCMR901]

Thx for watching

[@brandonbowerstx]

Good video. I'd recommend taking a hard look at the shotgun card concept (velcro on the side of the receiver + flexible side saddle), I mounted 6 and 9 shotgun cards on a tactical shotgun and they run beautifully. Load up, shoot, reload, rip the card off and drop it, pull out another and slap it on the side of the weapon. Also you should be able to mount a picatinny rail for a reflex sight pretty easily (should be predrilled on top to take the insert screws)

[@MrCMR901]

Appreciate the info, I’ve been looking into adding a reflex sight for sure. Thx for watching ‼️

[@mjolnirdynamics8789]

Yup! The reload cards are the way to go. It allows you more versatility in ammo load outs by being able to swap cards quickly and while on the move. They also offer you a great way to carry additional ammo and replace the empty card on the receiver. If you decide to switch to the cards, spend the extra money on good velcro tape from a good company. Otherwise it will peel off to easily.

[@Joseywales414]

Brandon what brand and kind model of those cards did you get? Where to get them? You ought to do a video on your gun also Brandon. Thanks for the info.

[@rrouge1]

That a really cool idea.

[@DriqBlaq]

Hands down best walkthrough of upgrades so far 😎

[@MrCMR901]

Thx for watching ‼️

[@iloveNgany]

If they're not dead after 5 rounds of buck you can poke their eye out with the magazine cap at least

[@MrCMR901]

😂

[@JP-te6cr]

Great build! Shockwave gets made fun of but it's a super fun platform. I like a lot less stuff on mine, prefer just the heat shield plus a 1 shot extension tube, and the sb brace.

[@MrCMR901]

Thx for watching

[@firered03snake]

one of the best looking shotguns I’ve seen on KZbin 💪 excellent job 🫡

[@joejanitor8410]

Awesome build ! Gunstore got mine in Friday …Just now Ordered build parts ! Thank you.

[@MrCMR901]

Thx for watching, you’ll love it

[@msgajhimelret9496]

Very nice "Dope"... thanks for posting the info required on the parts.

[@veeel4996]

Good stuff, I just picked up a shockwave today and already know what ima get for it now , I appreciate the help 💯

[@MrCMR901]

No problem , much appreciated

[@cooljshirts6775]

I got to step my Wave game up! Awesome upgrades

[@MrCMR901]

Lol , thx for watching ‼️🤙🏾

[@BlackNAVYAmericanVET]

Sharks with LASER BEAMS 🤣.......Your shirt is GREAT! 💯💯💯💯💯💯🇺🇸

[@jamesporld6967]

All the bells and whistles. Slowly doing the same to mine. Just reviewing the TL racker and your video came up. Gorgeous shotty 👍🏼

[@Travisb71]

Very nice setup!! Thank you for sharing! I’m going to get that for-end for my shockwave for sure!!

[@MrCMR901]

Thx for watching 🙏🏾

[@carlosdelvalle3729]

Thank you brother!! Great info for Moss shockwave upgrade!!

[@VOYTEyttv]

Thank you for the video. God Bless America !!!

[@MrCMR901]

Thx for watching , blessings ‼️💯

[@laserguy1932]

Dude, seriously nice setup. I’m jealous, I want this exact setup!

[@RayRayGrt]

I upgraded last month to the streetlight racker and SP tactical brace. I also have the monstrum side saddle for the shockwave(amazon). It was nice coming on here and seeing a similar set up as well as a great simple explanation and breakdown. Didn't even think I could change the pistol grip from the SB. Thanks for the info!

[@MrCMR901]

Awesome , thx for watching ‼️💯🤙🏾

[@MrFmccarty]

Aw yeah! That is how to work it. I just can’t make myself pay more for less! With the brace it is a whole lot moves controllable and looks way smarter!

[@colincline1387]

Serious upgrades!! I've done a few, but I'm going to use the Stream light and the top rail for sure. Be blessed and keep 'em coming. You just scored another new subscriber.

[@MrCMR901]

Thx for watching, much appreciated ‼️💯

[@triggered577]

This is such a nice piece. I plan on getting a Shockwave so I might have to copy some of this, lol.

[@bonkersmcgee4356]

Woah. My man. You've got the coolest set up of these that I've seen.

[@MrCMR901]

Much appreciated, thx for watching

[@bonkersmcgee4356]

@@MrCMR901 Seeing a lot of reviews about the light not fitting. What was the installation like for you?

[@MrCMR901]

Piece of cake 🍰, not hard at all

[@bonkersmcgee4356]

@@MrCMR901 No adjustments needed at all? I'm seeing reviews where people had to bust out a the Dremel.

[@MrCMR901]

Nah not for me anyway

[@JDs_RandomHandle]

I used mine out of the box with the original slippery grip. Sent about 20 3" superX buckshot loads through it before I wrapped it with hockey tape which was fantastic.

[@MrCMR901]

I’ve heard of the hockey tape , where do you find it?

[@lawrencelymanii6943]

And the mini shells are definitely the thing that makes the basic Shockwave a viable option. I love slinging shorty slugs with mine, and my test on ballistic gel have been pretty awesome as far as damage

[@showproja]

I love the capacity they offer, but they are less dependable, even with the OPSol adapter. I load my own mini's and it's pretty hard to make them short enough to clear it. You can trim it a bit to allow a slightly longer shell. I make a six pellet .35cal round mini that rocks the house- WAY hotter than Aguila.

[@lawrencelymanii6943]

@@showproja I've actually never had even 1 problem with either Aquila or federal minis and my tacsol. Never jammed, never a failure to fire. Probably put, at this point, around 2500 of em through my Shockwave. Now, without the adapter, nothing but issues, flipped shells. Maybe I'm lucky?

[@franciscofrias6160]

Has anybody found where I can find this or a similar heat shield with sights ?

[@anthonyclaudio1189]

I’m working on building my shockwave. Your brace is a good choice. Currently have Bulldot green laser on rail and a small light on defense tactical tri-rail.

[@ponchiii2106]

This gotta be the bad ass build ive seen can’t wait to purchase mine man I’ve recently bought myself a new glock 19 gen 5 and already build it now im waiting for this one and build it , and next purchase a Ar-15 and later on a mini draco

[@MrCMR901]

Sounds awesome man , thx for watching ‼️

[@Joseywales414]

That is beautiful,, , nice job 👏👏 thanks for giving the names and model numbers of parts. Nice home defense ide say. Tricked out very nice 👍🏻👍🏻😄

[@Joseywales414]

Dude that is freaking awesome! I have to give you another thanks 👍🏻👍🏻👍🏻👏👏👏❤️❤️ , I didn’t catch that last part until I rewatched it again. You did good, that is so sweet. Thank you for putting links down and all. 👍🏻👍🏻 Peace brother. 🙂

[@MrCMR901]

Much appreciated ‼️

[@justins380]

100% Awesome. I might have to get myself one. I have a 590 special purpose and a Rossi circuit Judge so really don't need a Shockwave. But........... that's so cool I want one! Definitely going to look to see if I can get a for-end. Thanks for the video and info.

[@MrCMR901]

I’ve seen them come back in stock in a few sites. Fun gum to shoot . Thx for watching

[@ScrewballMcAdams]

Good video with some great 590 upgrade ideas. I may use some of them. Thanks!

[@robertfrapples2472]

I love my raptor grip wrapped with hockey stick tape. I think that stock takes away the weapon's identity, plus makes it harder to store and wield in a vehicle. You should have spent that money to opt for the green laser. It's well worth the extra bucks. It uses four batteries vs. the red's two, and green is much more visible in daylight. Also, as your wife may attest, those polymer conical bayonets are probably going to cause more problems than they solve. Love the 1000 lumen light, however!

[@MrCMR901]

It’s my bedside weapon, I have a AR 9 setup as my truck gun. I did ad some stipple grip tape to the raptor grip tho and it felt good. Wanted something I could put on my cheek, hence this is why I bout the brace . Thx for watching 🤙🏾

[@djarnoldo516]

IMHO, the green laser isnt worth it. I shot my Shockwave last week in full midday sun at 20 yards with sunglasses on, and the red laser was plenty visible on the target. With the green laser, you need twice the number of batteries.

[@Robert-ty3qi]

@@djarnoldo516 they're free

[@danielhardwick-mf3xr]

I LIKE IT! Just got my new SHOCKWAVE, so you gave me great suggestions! Great VIDEO, thankyou!

[@MrCMR901]

💯🤝🏽

[@firestarter3095]

It's a "sharp" looking boomstick for sure! I love that crimson trace laser, but I changed out the safety selector so I don't think it will fit

[@MrCMR901]

There is an enhanced safety selector that I’ve yet to put on that supposedly has no issues

[@bripowered]

I think I just found the shotgun I'm looking for. Thank you for posting this.

[@fireguy_75]

Just ordered all these parts from my shock wave, beautiful build buddy!

[@MrCMR901]

Awesome ‼️ thx for watching ‼️

[@roguetrooper2138]

I just got my 590 Shockwave 20 gauge. How did your upgrades come out? Curious about The Streamlight foregrip. i'm hearing you need a special tool and it not fitting. Thanks

[@findaware]

Its good to see us talk to us about firearms, good look. PDX

[@MrCMR901]

Thx for watching ‼️

[@frankevans6584]

You up in Portland OR? Beautiful state

[@JAKEYSPOOK]

Damn bro I just got my shockwave and now I got all these upgrades to get thanks to you!

[@MrCMR901]

😂 , thx for watching

[@MonteGuy86]

WOW!!!!! I am definitly going to add a mossberg shockwave to my arsenal, after seeing all the upgrades you did to yours……. very nice weapon.

[@MrCMR901]

Thx for watching ‼️🙏🏾

[@abdullaex4119]

Very nice brother. I have done similar to my Shockwave. Nice watch matching the shirt. And the cross of Christ. Well put together video. Peace from Texas

[@MrCMR901]

Blessings 🙏🏾, thx for watching ‼️

[@jeffclark2424]

Best looking Shockwave I’ve seen

[@MrCMR901]

Thx for watching 🙏🏾💯

[@gaylecoombs5510]

Wow bro good shit 👏 I must say this is the best setup I have seen hands down. You've inspired me now I know what I wanna do with mine

[@MrCMR901]

Thx for watching

[@gaylecoombs5510]

@@MrCMR901 thanks for sharing sir!!!!!

[@phonedude58]

Just got my new Shockwave and plan to use many of your ideas...great video!! thx

[@MrCMR901]

Thx for watching ‼️

[@Wizop]

Ur shockwave is a monster. I need that but I want to make it a folding brace and then it would be perfect

[@MrCMR901]

Sounds like it would be lit AF lol

[@Mr_Ruhl]

A folding brace will make it illegal. It'll be under 26" as they measure them folded.

[@Cincothakid]

Nicest one I’ve seen hands down I have the one with the walnut furniture don’t know what to do with it but definitely like your set up

[@MrCMR901]

Thx for watching

[@rashardperry3575]

That is the best set up I've seen in this firearm. I have one and I'm going to assemble mine somewhat akin to yours. Thank you for the video and knowledge.

[@MrCMR901]

Thx for watching ‼️🤙🏾

[@guillermomaguire5394]

Nice video on how to kick the shockwave up a notch, and thanks for showing our OPSol Flex Adapter to run minishells. For those who are looking for info on the minishells, and for home/self defense, here is some from our extensive testing..... From a shockwave, at 8 yards, the mini buck rounds from Aguila, Challenger, and Federal all penetrate about the same. We test at 8 yards, using 2 real 3/4" sheets of plywood, 1" apart. All pellets will typically go through the first sheet, and a few from each round will go through the second. The Federal patterns tighter, since they buffer the load. For slugs, others have done a better job reviewing, but at 8 yards, they all will typically get through 4 pieces of 3/4" plywood. At distance, the Federal is the best. In birdshot, at 8 yards, Aguila is probably the best, since it uses a cup wad. At that distance, a fair amount of that 7.5 birdshot still hits with a punch. Challenger bird is a target round really, and it spreads quickly. If you want really hard hitting minis for your shotgun, get some Exotic Products minishells. They hit quite hard, and you can get 00 buck rounds. For home defense, though, may be too hot. And as always, home defense is a family effort, and the OPSol adapter with minis creates a platform most everyone can use.

[@MSM4U2POM]

Thanks, bud. I agree HD must be a family effort, but one of the most significant reasons for using minishells must surely be recoil reduction, and you didn't mention that. Would these pint-sized powerhouses be suitable for the recoil-sensitive, do you think?

[@MrCMR901]

Yes the mini shells have very minimal recoil

[@guillermomaguire5394]

@@MSM4U2POM THE MAIN REASON for our developing the adapter was the low recoil of minishells. We were working to get shotguns into the hands of our wives and daughters, and even low recoil full size shells were too much for them.

[@MSM4U2POM]

@@guillermomaguire5394 Thank you both for very definitive answers. Be safe, gentlemen.

[@JeriDro]

dude, you put a stock on it....YES!

[@jasonhouchins]

This is more relevant than ever. Nice build, close to mine.

[@mamaterri00]

Oohhh when I get mine I'm going to make it look exactly like yours.

[@MrCMR901]

Thx for watching ‼️

[@ronaldkrause8577]

I have the exact same setup except for the heat shield. All I need is to add the 14” ported barrel in hopes of getting a little less recoil…funny thing about having this much gun and being in love with MINISHELLS….haha…LOVE MY SHOCKWAVE!! Update: 10/21 Found the perfect Ammo for the Shockwave, it’s Federal LE133 00 nothing is better from all the research and Ammo fired from the new 14” ported barrel (which I have thrown the kitchen sink at W/much less recoil and it took it all, I used the brace with it too! The brace ended up collapsing all the way to the ring nut. Haha…I guess it didn’t like the 1610 FPS Slugs I shot…I like it better now that it’s shorter! Still a great “FIREARM “!! …NOTE: Winchester Ranger RA1200 is a close 2nd with low recoil and rated LE. Both will put a 2 to 3” hole in your target from 12-15’ and not over penetrate according to ballistic tests.

[@MrCMR901]

Most definitely love this gun lol

[@Shot_Gunner]

That’s a nice looking shockwave! Nice shirt too. 🤠

[@MrCMR901]

Much appreciated, blessings ‼️

[@johnbrennan2055]

What kind of heat shield is that I’ve been looking for one and that’s what I want

[@im_ur_CULT_LEADER]

props on that build it looks bad ass and very intimidating LOL...

[@MrCMR901]

Much appreciated, thx for watching ‼️🤝

[@73sebrougham]

This is the most bad ass looking shockwave build I have also ever seen . I was going to build this same one but now it’s illegal

[@zephead69zoo92]

Thanks a lot Carl....I thought I was done with my upgrades but you just had to rub it in my face ...lol. Seiously though, that looks awesome and grateful for all the links to the upgrades. God bless.

[@MrCMR901]

Lol 😂 , thx for watching ‼️

[@gunsmoke5657]

Man that’s a nice ass set up on that Shockwave! I have to get one of those braces with upgraded handle. That’s awesome!

[@vincewans1148]

awesome upgrades sir!!!! I'm going to purchase the heat shield soon and may just add a spike as well.....lol

[@MrCMR901]

Thx for watching 💯

[@kctyphoon]

I have my shockwave set up to run mini shells also. I have a 6 shell side saddle, and two mini shells in each facing tip to tip pushed halfway down the retainer too. In total theres 12 shells on my saddle, and they are all held in there nice and firm. Only difference is the retainers on my saddle arent split like yours, so it may hold them a little tighter.

[@MrCMR901]

Nice

[@FIYAHSTARTER85]

Maaaaaaaaaaan RESPECT!🙌🏾🙌🏾🙌🏾🙌🏾 I subscribed just off this video. I've been wanting to upgrade my shockwave forever, I'm glad I waited. Definitely ordering the brace and grip today!

[@MrCMR901]

Much love, thx for watching ‼️ you’ll like the new look

[@johnormike811]

If you want to shoot from the hip, crimson trace laser saddle is my go to.

[@fragelicious]

Except for the 'red' instead of 'green' laser, You have the perfect f'ing Shockwave on KZbin.

[@hawkknight4223]

Bro I’ve been wanting to get one for a while. But you somehow managed to fit everything on there. And it’s still not look Gody! That is phenomenal.

[@mcraige109]

Great build out of the Shockwave. I like the mods. Thanx for sharing with us.

[@MrCMR901]

Thx for watching 🙏🏾

[@lawrencesanchez8904]

Nice setup! I have the crimson trace laser also. Great video.

[@kevinyoung1447]

Sweet shockwave, gave me some great ideas! Thank you for the video!

[@MrCMR901]

Thx for watching 👍🏽

[@christopherhyatt7414]

Great video! Best looking Shockwave I've seen. Thank you sir!

[@Si1v3rmane]

Really nice setup. I'm saving your video as an alternative setup (I'm considering the black aces tactical to keep the overall length short for home defense but I want the option to switch to a brace setup like this for hunting or whatnot).

[@MrCMR901]

Nice, thx for watching ‼️

[@ncooper7757]

Nice set-up and they way you have it you can switch out the barrel for different sizes so it can be a multi-use shotgun. You mite want to order some 3 inch shotgun adapters so you can add to the fun and so other ammo out of it like 20 gauge 410 9mm 22 and others I got plenty for my pump and single shot 12 gauge.

[@MrCMR901]

Thx for watching, I’ll look into that.

[@machstem2536]

That's too cool dude, light too

[@MrCMR901]

Thx for watching 🙏🏾

[@berryae74]

Thats the coolest shockwave I've seen, thanks for the inspiration. I'm definitely getting one now...

[@MrCMR901]

You’ll love it