Shows just what is achievable when a vehicle is maintained correctly. Looking forward to the 450,000 and 500,000 videos! Viking of a car! 💪
@RobertDIY4 жыл бұрын
Yes sir!!!
@ethran3 жыл бұрын
Robert, from one Rob to another, Thanks a ton man! You've walked me through a few maintenance jobs on my R and given me a ton of courage! Also, your haircut looks great!
@RobertDIY3 жыл бұрын
Thanks
@aroneden.3 жыл бұрын
Hello Robert! I have a 1998 volvo s70 and through your videos i have now relised that it is indeed in need of a new PCV system (oil leaks from cylinder head cover and some other parts, aswell as blows up the glove). However, the motor in it does not match this one sense its the 10V 2.4 liter engine ( B5252S ). I cant find for for the life of me a new set of PCV but more importantly, it does not have a tube that goes next to the oil cap. Therefore im stunned on how PCV system works on my car and cant get a replacment for that reason. Ive own the car for about 1 month and the guy before me drove it way, WAY to little. With 156 250 mils on the clock the motor works fine and starts like a champ. Thanks for these informetive videos and hope you can help me find an awnser.
@RobertDIY3 жыл бұрын
Sad to say, I have no idea. Check with a Facebook page.
@colintrout10954 жыл бұрын
Robert my jeep 4 cylinder kept blowing out oil of the dipstick and making a mess,so I re- routed the line and removed the pcv valve and installed a en-valve that worked for a while,now it is just blowing oil out of every seal,but runs ok and still has good power,but I guess it's rebulid time
@RobertDIY4 жыл бұрын
Sounds like it.
@howesitgoin7394 жыл бұрын
Yes before ripping everything apart check your hose and tree connections first. Leaned the hard way in my S70. Hard old and leak a lot. Me every morning 😁🤗🤣
@RobertDIY4 жыл бұрын
Exactly
@herbmanning83484 жыл бұрын
For some strange reason my PCV system is still working perfectly in my '03 S60 (181K). Maybe because of the frequent synthetic oil changes? I've done just about EVERY other common Volvo maintenance/replacement/repair at this point. The car runs as good as new still.
@RobertDIY4 жыл бұрын
Yep, that will do it.
@FioriDiRuggine6 ай бұрын
Hey Robert, awesome video as always :) My '96 850R has only 105,000 miles on it but fails the glove test due to pressure in the engine. I have bought the parts to do a PCV service/clean/change. Before I do that, I have a question. I noticed today that the vacuum hose connected to the left hand side (when looking at it) of the inlet manifold is broken and therefore there is no vacuum connection between this port on the inlet manifold and the PTC valve on the turbo inlet. You suggest an issue with this vacuum hose could cause a glove test fail, but my car starts, idles and runs smoothly. How can that be if the vacuum hose is broken completely? Thanks dude :)
@RobertDIY6 ай бұрын
Small leak.
@Twobarpsi4 жыл бұрын
My V70 engine is dirty, are Volvo electrical connectors good to withstand an engine degreasing?
@tonychambers92284 жыл бұрын
Be Careful with what types of engine degreasers you use many will tarnish the aluminum. I would make sure the engine is 100% cold cover the alternator and after cleaning dry it with a blower like compressed air or leaf blower. I would also make sure that no water gets in the spark plug tubes or its gonna misfire like crazy when you start it. I myself would recommend contacting a detailer in your area. Most detailer will do just the engine detail for under 50$ and if they damage the car they have insurance.
@RobertDIY4 жыл бұрын
kzbin.info/www/bejne/gJjGkn2AjqZ9e7s
@KKlepacki4 жыл бұрын
Great video. What would be the good range on compression test?
@RobertDIY4 жыл бұрын
kzbin.info/www/bejne/kGHLi3iCjsyCjpo
@andyackerman96364 жыл бұрын
Hi Robert, I'm watching you today from my part-time job. I have a 2001 V70 XC with a 170,000 miles. Overall a very nice car, but it won't run past 10 miles per hour. As soon as I press the gas pedal it blows off the hose from the throttle body. It is (was) securely clamped and I even had a heavy duty zip tie on it for backup. I have done many replacements and am in the middle of the PVC system. I bought a kit from the good folks at FCPEuro. I did find some blockage in the banjo bolt, but the ports into the engine were clear. The large aluminum pipe was disconnected and someone had but a bolt in the rubber hose to block it off below the engine mount. Before I put all this back together, is there anything else you think I should do? It is a rather ominous job that I don't want to have to repeat. Thanks, from desperate in SC. So far all is well here, and I do hope life in Albuquerque is good. Rush L. Workman
@RobertDIY4 жыл бұрын
kzbin.info/www/bejne/hIPKq3tmma13gLs
@chuckrfuller4 жыл бұрын
Hey, what are your markings on your radiator hoses? Is that a note to when(miles) you last changed the hose?
@RobertDIY4 жыл бұрын
Nope. Probably marks from a salvage yard.
@warrominator4 жыл бұрын
Hi Robert, should you rev the engine with the glove test? If so, should the glove still be sucked vacuum or is it acceptable if it inflates slightly?
@RobertDIY4 жыл бұрын
I usually rev it if it is boarder line failing to see what it does under higher RPM's. Usually still sucks in at 2500.
@ProudCroatian994 жыл бұрын
Hey Robert! Sunroof dude.. again! I need a used pair of rails, specifically im talking about the parts that clip/screw in and connect DIRECTLY with the sunroof, mine corroded and flew off, please help me out!
@RobertDIY4 жыл бұрын
How can I help you with that?
@jumblesaleboo4 жыл бұрын
It would be an absolute miracle, to find a rubber glove here in the UK at the moment, due to this virus shenanigans.
@RobertDIY4 жыл бұрын
lol try the trash.
@jumblesaleboo4 жыл бұрын
Robert, touche...would be a great way to recycle if they can be sterilized first though. :)
@therealsurreyogsdk60484 жыл бұрын
Hi Robert, I have been chasing around the issue that my 98 v70 after doing the pcv change the car is blowing out more smoke out the dip stick and not passing the glove test, i have watched all the post pcv servicing videos and cant figure it out. Do you think I would be fine driving around the way it is or should i keep trying to figure it out ?
@RobertDIY4 жыл бұрын
Did you do a compression test?
@therealsurreyogsdk60484 жыл бұрын
@@RobertDIY Yes I did, All cylinders were 195 except cylinder 1 which was 185
@mattj4564 жыл бұрын
Hey Robert, my 1995 850 Turbo has compression between 145-155 on all cylinders. I have replaced all the PCV system and hoses with OEM Volvo, cleared the ports in the block (they weren't clogged to begin with), and cleared the PTC but I'm still failing the glove test and have a smoking dipstick. What's next?? Do you think I need to drop the oil pan? The car was sitting about 2 years when I bought it. I can blow through a tube in the lower engine port and I hear bubbling in the oil pan, so I know it's not blocked up.
@RobertDIY4 жыл бұрын
are you testing it hot?
@mattj4564 жыл бұрын
@@RobertDIY yes, needle at 3 oclock
@RobertDIY4 жыл бұрын
Then something is bad.
@mattj4564 жыл бұрын
@@RobertDIY do you think my compression (145-155) is good enough to not be the cause? I'm just not sure what else it could be. Have you ever heard of widening the PTC hole for more flow?
@alcap61453 жыл бұрын
Look on the forums. Use larger pipes (I mean the rubber tubing) and the system will breathe better. You will need a new pcv box, and all new parts. Clear the turbo valve thingy. And then the two rubber hoses , that are combined into one , DONT USE THIS FACTORY PART. Use home depot and auto parts store parts, and "upside" these hoses. The system will breathe better and will work. My v70 1998 had 244k miles on it when I did this last month. Just do some searching on the 5 cylinder turbo volvo forums, you know the ones. Hope this helps! Let us know what you find
@ceyhankaracolak409 ай бұрын
Ustam sızden laguna1 n70 benzin lpg arac motor enjeksiyon bobin rolelerı hakkında bilgi anlatırmısıniz ust lapak uaptırdım aldıgım kişi motoru yaptırmıs bır sefer hareret yapmiş bende ust kapak yaptırdı ama radyotor borusunu sişiriyor motor volant tarafinda motora giren boru kıvrılmiş bu neden le boru sişmesi yaparmi derdı bıtmiyor gosterge promlelerı 1500 2000 devir arası kucuk tekleme hızlanirken bu olay ben kapak yaptırınca oldu ne yapsak yok olmuyor ustadayken benzin rolerı yaktı su yedek deposu yaninda siyah kutu ıcınde bunla 30 anper bırı dıyerı25 30 kac anper olmali yardimci olurmusunuz bu araclara bakmak istemiyorlar
@RobertDIY9 ай бұрын
Neyse buradan yapabileceğim pek bir şey yok. Kanalı aramanız ve her sorunu teker teker düzeltmeniz gerekir. Birkaç video önereceğim ve belki videoları çevirme konusunda yardım alabilir ve her şeyi çözebilirsiniz. Düzgün bir şekilde onarılması gerekiyor, yoksa size sorun çıkarmaya devam edecek.
@RobertDIY9 ай бұрын
kzbin.info/www/bejne/naWcqGCQiN2mb6s
@RobertDIY9 ай бұрын
kzbin.info/www/bejne/jYmyeZ2bhbqKobc
@advcomsyst2 жыл бұрын
👍🏾
@RobertDIY2 жыл бұрын
thanks for watching.
@wileyethridge27694 жыл бұрын
Hey Robert I replaced my pcv system on my 99 Volvo v70 non turbo and my mechanic pulled a code saying it's running too rich and that he ran smoke through the system and it was leaking from the PCV under the manifold and is leaking from the manifold itself. He also said on of the bolts were lose. Do you think if I just tighten the manifold it should seal itself more and that maybe one of the PCV hoses aren't all the way connected. I know it's hard for you to tell when your not here to look at it but if you have any information that could help me I would very much appreciate it. And thank you for all your help in the past.
@RobertDIY4 жыл бұрын
Sad to say I have no idea. Did you use Volvo parts? Intake manifold gasket? If there are loose screws, they should be secured.
@MrSagen7 Жыл бұрын
Hey robert, I do the glove test and my glove sucks in, and once I rev it, it almost eats the glove up, is it safe to say the PCV is 100% fine? reason im asking is i've failed Emissions on high CO, And I feel like I've replaced everything on the car that could cause this but the PCV
@RobertDIY Жыл бұрын
fine.
@RobertDIY Жыл бұрын
failed due to old valve stem seals.
@MrSagen7 Жыл бұрын
@@RobertDIY Ouch! if that's it I might just swap the engine xD Thank you