Most requested battle so far. Rocky Balboa vs Apollo Creed ROUND 1 PLUS A BONUS VIDEO 🎁

This has definitely been the most requested video from you guys in regards to the best budget friendly spray guns. these are my top two choices. who do you guys feel won
Vevor spray gun
www.amazon.com...
mid=A8LTGY2QXKX9M&psc=1&tag=thetriggerman-20
clear coat
www.amazon.com...

[@mukbangbros4125]

Hey triggerman I have 2 questions.1 I was watching a larger YT channel and the person said to never get your coverage on your first coat of base he says do it his way listen to his channel its the correct way. And i know you always mention that you get most of your coverage in your first coat. So im just a littlw confused on that. And #2 He also states you have to use expensive guns not the cheap guns for good results. But in the past the same channel has stated that you can get good results with cheap guns and has even made videos spraying them even listing links to purchase them. Sorry so long but I'm just a little confused.

[@thetriggerman954]

🤦🏽‍♂️ man I wonder who could have said that 😅 I will address it in a video soon. I've always told you guys take a little from every painter and see what works best for you. I'd never tell you to only listen to me. #1 that's not my character #2 it's not fair to you guys. And as far as the expensive spray guns sometimes man you have to use your head and think I'm a small Channel I've only had Vevor send me a spray gun with a small percentage of the sales that are purchased through my link The bigger my channel gets say half a million subscribers of course I'm going to get bigger companies send me more expensive guns so say 5% of $100 Vevor gun vs 5% $1,000 spray gun which one would you choose to promote? End of the day it's all about the money for some. But I'll make a video addressing it until then spray on brother 🤙🏼

[@mukbangbros4125]

@@thetriggerman954 I appreciate the reply and keep the videos flowing before I....UNSUBSCRIBE! 🤣

[@johnbiggs9561]

Love the no-bullshit content....and honest reviews. Keep up the good work....I wont be unsubscribing!

[@thetriggerman954]

❤️ thanks man I appreciate that. I'll definitely keep them coming. And I'm glad you're not going to UNSUBSCRIBE!! 😄😄🙌🏼🥳

[@mcats8]

Yeah Triggerman! In the end we all know the man pulling the trigger has the most influence on the finish. Still a great video though, you're entertaining... love the "hater man" voice. Keep em coming

[@thetriggerman954]

That's brother that's that "Trigger troll" 🤣🤣 I appreciate you watching 💪🏼👊🏼

[@cynt1111]

can’t believe how clean your jobs are in an open garage

[@thetriggerman954]

Either I'm very lucky or pretty good at what I do. 🤔😀😂 🍀🤞🏽

[@thetriggerman954]

Also I think because I use the LPH using low pressure gun like that doesn't stir up to much dirt few inches off the panel and it works like a charm.

[@MichiGanjaMook]

This gun or that gun? In the end its up to you to lay the paint. Triggerman lays it down. And another one trigger. Cheers

[@thetriggerman954]

Exactly Glock or Smith & Wesson either way it's gonna burn 🔥🔥 🤣 thanks Michi 💪🏼👊🏼

[@3rekoatskustoms929]

All 3 look good 👍🏿

[@thetriggerman954]

Thanks man LPH has like half the over spray as the other 2 guns. 🥳💪🏼👊🏼

[@3rekoatskustoms929]

@@thetriggerman954 l have the LPH and supernova

[@thetriggerman954]

@@3rekoatskustoms929 you got the big dogs 🐕🐶

[@myblkz]

Ani for me since I already have one, that vevor is 🔥 for the price tho. Keep up the good work trigger

[@thetriggerman954]

Yep if you already got it then you set. I like the feel of the ANI 💪🏼👊🏼

[@cabrezzy7838]

Would love to see more of you spraying clear with your sagola

[@thetriggerman954]

Ok Cabreezy you want me to bring the cannon out 🤣 I got you man. I planned on doing a comparison with the DVR cap And the Titania cap. I'm try to get something in this week coming

[@joblo2299]

@@thetriggerman954 what cap u got on that lph400 they got quite a few...

[@thetriggerman954]

@@joblo2299 I use the silver LV4 cap. I have all the other caps purple, orange but they don't work for me.

[@joblo2299]

@@thetriggerman954 thx 100 bro..146k sus Aeady in my pimp c voice..keep pushn im rootin 4ya

[@thetriggerman954]

@@joblo2299 4sho thank you man. I'm pushing for it 💪🏼👊🏼

[@diamonddetails9445]

I get it... VEVOR for XL panels. The other, for smaller ones😮. Makes sense

[@thetriggerman954]

😂

[@thetriggerman954]

You wild bro

[@ganeshnarayan5505]

Great video Triggerman Vevor is the winner in my opinion lays out very nice beautiful work Triggerman.

[@thetriggerman954]

Thank you bro. Yea and for the price can't beat it. 🙌🏼💪🏼

[@asksteevies4941]

Good video I like it all combined

[@thetriggerman954]

Thank you man, I plan on doing more like that in the near future 💪🏼

[@cocko1135]

Hey brother 😉. Man, you be spoiling Mr Cheap with those jobs brother, beautiful looking blend once again. Nothing in it between the Vevor and ANI to me, you said it Vevor definitely pours on a bit heavier and I think the ANI maybe atomises that bit better but the results are much the same. Great video as usual my man 💪😎. Nearly at 1.5k now, killing it 🔥

[@thetriggerman954]

Yoooo what up Cocko, thanks brother getting there slowly moving along. 5 months In. Feels like it's been years 😭 thanks for checking in. Hope you having a great weekend 🤙🏼🥳

[@cocko1135]

@thetriggerman954 cheers bro, had an awesome weekend of golf with my brothers. Got a few weekends ahead with some weekend cash jobs, gotta get ya some hey 😉. BTW, the thumbnail for the tanning spray got me clicking 🤣🤣🤣

[@thetriggerman954]

@@cocko1135 😂😂 😬

[@slackerzsincity8822]

Looks like the vevor flows better, ani feels like sprays finer

[@thetriggerman954]

That Vevor is something serious 🫠

[@bosshawg7427]

Both nice guns and definitely put out the fluid if someone has good exhaust. I gotta stick with the baby stuff. 😂

[@thetriggerman954]

Yeah man my exhaust isn't that great that's why the LPH is my go to gun. Less fog

[@bosshawg7427]

@@thetriggerman954 same here. I'll take the smaller fans for lesser overspray. A powerful gun does no good for you if you can't see.

[@thetriggerman954]

@@bosshawg7427 exactly 💯

[@UndergroundPaintKing]

Looks like a draw to me Triggerman, you killed it on all 3 💯💪🏾

[@thetriggerman954]

UPK whaaaat up my boy 👊🏼 thanks champ. Yea them gunz running a tight race. The V is just a tad bit faster But that's not necessarily a good or bad thing Painter preference. Thanks Champ 🏆 💪🏼💯

[@thetriggerman954]

Yoooo UPK subscriber wants to know if I can do some comparisons on the LVLP spray guns, I told them I have to check with UPK you are the LVLP Godfather and that's your lane. Does the triggerman have your blessing to do a few videos on the LVLP spray guns? 🏆💯

[@UndergroundPaintKing]

@@thetriggerman954 you have my blessings Triggerman 😂💯💪🏾

[@thetriggerman954]

@@UndergroundPaintKing 🙏🏼🙌🏼 these fools out here need to put some Respek on UPK name. Great now I gotta find some LVLP guns 🤦🏽‍♂️

[@UndergroundPaintKing]

@@thetriggerman954 it’s a few lvlp spray guns out there bro!

[@georges3485]

I love my LPH400, its my dedicated clear coat gun.

[@thetriggerman954]

Yea man love mine too. Before starting the channel it was my go to gun 90% of the time.

[@WilfredGreen-ov8bh]

Do you thin your materials for a flatter finish,,asking because 22psi is quite low for fine atomization

[@thetriggerman954]

Some times I will over reduce my base by 10% for a flatter finish. But one of these are over reduced. 22 psi is fine for base coat. It's not like the base has to be atomized like clear coat. Just has to lay down smooth.

[@user-wu4be5ve4h]

Triggerman, thats a beautiful blue! Are you able to get the paint code for it?

[@thetriggerman954]

Man in didn't even remember what car that was from. I think a Honda

[@user-wu4be5ve4h]

Triggerman, that is a beautiful blue! Are you able to get that paint code?

[@thetriggerman954]

Nah man I don't even remember what kinda car that was for 😭 it might have been a Honda but I have like 60 cans of Honda paint. Sorry bro

[@SpeakerKevin]

What did that do when you said you "Burped" the gun by turning the gun upside-down and pulled the trigger?

[@thetriggerman954]

Yes sir 🙂 like a baby you can burp them 😀 turn the gun upside down and pull the fuller fully and you'll get all of the air out of the cup. It's not super important unless you're going to be spraying upside down under bumpers and things like that.

[@rosslindsey1388]

Hey Triggerman, I got the clear ID. Is there a base and seal make and model I need to know? Thx for the great videos

[@thetriggerman954]

The base and sealer is ProSpray our paint distributor brings it here for us. Pretty much any base and sealer should be ok. The clear is what'll give it that shine and it's a a decent clear in my opinion. Thank you for watching 💪🏼

[@manuelmejia76]

Hey fam what's a good cheap high solids clear bro

[@thetriggerman954]

@@manuelmejia76 no such thing lol

[@steelcitycaprice.899]

Triggerman all i can say is i agree with all the comments i read and with skills you cant miss with either 👊🏾 and for the last bumper on auction ride..they got a hella nice finish 🔥🔥🔥. Another win 🏁🏁🏁👍🏾😎

[@thetriggerman954]

Thanks SteelCity 👊🏼 yea man for a one coat cheapy job. Supposed to use the garbage clear on it but I had leftover high solids clear in the cup so I blessed him 🤣 thanks for watching bro 💪🏼🙌🏼

[@steelcitycaprice.899]

@@thetriggerman954 this stuff is my dope 🤣🤣🤣👊🏾

[@thetriggerman954]

@@steelcitycaprice.899 there are much worse addictions 😱

[@BearBudgetTurbine]

The Battle Royal! No losers here, tho. Here's a little twist...I got my hands on an Apollo turbine unit and the 7700 hvlp gun which is the newest version offered. Whole different ball game. 9 psi max. High cfm. 0.8 or 1.0 cap n needle set for base clear.

[@thetriggerman954]

Dm Big Bear I've been seeing those. How does it spray? Any good? Expensive?

[@BearBudgetTurbine]

@@thetriggerman954 The top spray gun Apollo has is $499.00 so not cheap, but not the highest cost hvlp either. It's an investment if you buy it new, but all paint equipment is... Got mine used, barely used. Looks like new. So I got a deal. With unlimited clean air and low overspray this might be ideal for a guy who works every day, but not in a big pro shop. I ordered the pps adaptor , a 22 ounce pressure cup(3m 2.0 system) and 2.0 refill kit. So this has the tube that goes into the cup from the gun. Will probably use the metal pressure cup for base to save money. For primers still gonna use compressor as I don't have a dedicated turbine primer gun yet. Will it spray as good? Might take a bit of learning, but I have been seeing good results from others who know what they are doing. So I'm gonna figure it all out and make it work. I don't Triggerman would see any advantage in his work environment, but I think it might work out for me. 👍

[@thetriggerman954]

@@BearBudgetTurbine sounds interesting. I have people ask me ask the time if I can come to their house and spot in their car. I'm wondering if it would be good for that 🤔 going to look more into it. 💪🏼👊🏼

[@BearBudgetTurbine]

@@thetriggerman954 Turbine would be great for mobile repairs...unit is very portable. All fits on the back of your car easy. I know other guys are using turbines for mobile repair. Not all are created equal, that's why I went with the best. Apollo been at it a long time and they have professional setups for shops, and smaller setups for guys like me👍

[@thetriggerman954]

@@BearBudgetTurbine what about like if you have to blow off the car. Can you put a blower on the send of the house and blow air?

[@haule8418]

man trigger i damn near threw in the towel today. used the vevor 22psi full fluid full fan on a honda silver metallic. base coat came out like crap. it was gritty all over and my metallics were standing. used wet bed and sealer. it’s gotta be my technique. i might have to just buy the dv1 to help me out. doesn’t make me a better painter but it might just help.

[@haule8418]

your videos help a lot but i still suck 😂😂

[@thetriggerman954]

@@haule8418 how hot was it today? What temperature reducer were you spraying? Fast,med,slow,extra slow? Full fluid is a lot in that gun I keep it 2.5-3 turns out from closed.

[@haule8418]

@@thetriggerman954 not too hot around 75-80. used slow reducer. i even tried to over reduce and add blending additive on my 2nd and 3rd coat. still came out like shit

[@haule8418]

sealer i put it one turn in from full and it sprayed pretty nice. but the base came out horrible

[@thetriggerman954]

@@haule8418 not sure what the hell could have happened temperature and reducer sounds good. Hopefully that POS regulator the gun came with is working properly.

[@Jeff-ks4tc]

The Lph probably atomizes better than the other 2 at lower pressure it looked like

[@thetriggerman954]

It does. Only think lph is $500 Vevor $89. ANI $200 🤣 but it's definitely a better gun in every aspect.

[@guillaumel3640]

Awesome but you know they (by they I mean the haters 😂) might bring out the fact that one was sprayed on plastic and the other on metal 😂😂😂. Nice finish bud. Really like how the material flows out. I have to ask, cause I know I would end up running it, have you had any issues in the beginning with runs with the Vevor? I’m a novice who found out last year I really like doing body and paint work. I’m not anywhere as quick as you triggerman but I really like how you get the material to or flow out to the panel and if the time to adapt isn’t bad, I’m probably going to order one. I just don’t want to spend time sanding out runs cause I’m trying to keep up with the triggerman 😜

[@thetriggerman954]

Man I hater season is over. I'm here to teach this stuff to those that want to learn. Haters are no longer my concern. But to be honest man from the first video I sprayed with this Vevor I haven't gotten any runs I've been spraying with the gun daily for about a month and a half now and haven't gotten one run It's not the gun that makes runs It's user error. You just have to keep moving with the gun your gun speed and your distance has to be right. The reason I can avoid runs is because I've sprayed with the same exact clear coat for 10 years now I know the clear I know how far I can push it. That's why I tell guys get to know your materials It's all about materials, materials, materials, materials it's not so much the guns. I take any gun and get just about the same results because I know the materials. Thank you for watching. Does ever anything else I can help you with man just drop a comment and I always get back to you guys 💪🏼👊🏼

[@guillaumel3640]

@@thetriggerman954 I hear you brother, it’s never just one facet. I’ve been spraying at home with a lvlp gun ( Aeropro a610). I have a 30 gallon tank and the low cfm gun works great but the trade off is that it is slow. You rip through panels like there’s no tomorrow and even if I’m behind a screen watching you spray, I can clearly see the amount of material being sprayed is so much more. Thanks for the perspective with the materials brothers, I will keep it in mind. Keep the videos coming 👍

[@thetriggerman954]

@@guillaumel3640 man if that's the case maybe you should try the lph400 that gun doesn't require much pressure and it's super fast. I mean it costs more but I highly recommend trying it out

[@rogerpolakiewicz2811]

And the winner is the Reigning UNDISPUTED CHAMPION TRIGGERMAN!

[@thetriggerman954]

🙌🏼🙌🏼🙌🏼 thank you Brother I'm no Champ without you guys. Thanks for everything 🙏🏼 🥳🥳🥳

[@foxybrown2]

all right my brother i just order a Vevor gun we will see if it is worth it. It looks like a SATA copy hope it shoots like one. I will let you know

[@thetriggerman954]

Every cheap gun looks like a copy of an expensive gun. I have dam near 10 videos showing how it sprays. But you got it man. Lay some glass with it. Lemme know 💪🏼

[@mitchellferre1652]

Can't beat the Vevor for the $. I love my Iwata w400 Bellaria 1.3 and Devilbiss GPI 1.4. That's my base and clear combo.

[@thetriggerman954]

You got the heavy hitter combo there 🤜🏼🤛🏼 knock out any job with that 💪🏼

[@matsushitokan7526]

Hey triggerman. What aircap do you have on the ani f160?

[@thetriggerman954]

It's the cap that came on it. I wasn't aware that they had multiple caps. So yea standard cap with a 1.3 tip

[@matsushitokan7526]

@@thetriggerman954they have a clear cap. Even with the standard aircap the result are outstanding. 🚀

[@thetriggerman954]

@@matsushitokan7526 didn't know that. I have the ANI skull and that gun came with a clear cap,HVLP,and water cap. But the F160 only has a standard cap there was no option to select a different cap.

[@jacobydavis3953]

What regulator do you have? I love the colored layout on it.

[@thetriggerman954]

All of my regulators are devilbiss. They use to be $20 now over $40 😭

[@jbb3502]

lph400 best gun ever. i have had mine since 2011

[@thetriggerman954]

I think I got mine in 2008 plus a new one still in the box 🤣

[@jbb3502]

@@thetriggerman954 nice, save 1 for museum its a masterpiece

[@thetriggerman954]

@@jbb3502 lmao na man just Incase they stop making them I want to have one to use 🤣

[@kr2513]

I will take hearses all day over what I was getting before I left my last job. Warranty work and crime scene cleanup trucks. Would rather be followed home by poltergeist than breathe in methdust or touch brain matter particles. Glove up and keep up the good work.

[@thetriggerman954]

Holy Sh💩t are you serious man? Wow nah man I couldn't do that one. ☹️

[@user-qx9rl2ud1o]

Really enjoy your videos trigger man. Are you spraying axalta? I always see alot of nason products

[@thetriggerman954]

No I'm spraying ProSpray the NASON you I use is for single stage. Old cans from previous jobs.

[@user-qx9rl2ud1o]

@thetriggerman954 Thank you for the reply. I'm trying to start my own KZbin channel and really look up to you..I don't know nothing about editing lol. Painting in Florida can be a challenge. I went from dealing with the humidity and water based to freezing cold in Pennsylvania

[@thetriggerman954]

​​@@user-qx9rl2ud1oorry for the delayed reply man. For some reason your message was in a spam folder, you should definitely start a channel I'm no pro at the editing I've only been on here for 5 months but I can help you with whatever I know so far. Just be prepared for the eggplant eaters. I wasn't ready so it kinda through me for a loop 🤣 but now I'm good now, it's like you get 99.4% love from everyone then their are the guys with no channel no subs that come in to say negative shit. I'd say that's the only negative to having a channel. But those are the guys that hate their life because they find out their dad is really their uncle. so start that channel we need more real painters on here. 💪🏼

[@user-qx9rl2ud1o]

@thetriggerman954 You the man! Thanks brother 🙏 I like your style and editing. Is there any where I can talk to you directly. Thank you

[@foxybrown2]

I was going to get the ANI but it needs alot PSI

[@thetriggerman954]

Yea it needs more pressure to atomize

[@GREGSGUNSONLINE]

VEVOR -LAS VEGAS EDITION.

[@thetriggerman954]

😂 right

[@andrelawrence9644]

Lph400 👊🏽👊🏽

[@thetriggerman954]

Guns a beast right 💪🏼💪🏼

[@nocandopdx]

Lph won

[@jacobydavis3953]

Do a spray it Lvlp next, or the aero pro a610

[@thetriggerman954]

Spray it lvlp? I've never heard of that. I'm going to check it out

[@jacobydavis3953]

@@thetriggerman954 Bet lol, just some guns that only require about 3.9 cfms to spray

[@thetriggerman954]

@@jacobydavis3953 oh ok gotcha I have to get permission from UPK 🤣 that's his lane. But I'll check into it

[@bosshawg7427]

They're the same guns pretty much. Lateral move. They're also fibbing on the CFM unless you're airbrushing with them. You still have to crank them up to get good output which creates more overspray.

[@skelety13]

This is not boxing

[@thetriggerman954]

Man I guess I couldn't fool you. I'm busted 🤷🏽‍♂️

[@ridgidhightorque9680]

vevor