Motor mover fitting --* short edit *

I fitted a motor mover about 2 years ago, that vlog was 18 mins long and I have cut the footage down to create this shorter version.
Both cables from the mover must be kept the same length up to the control box
Thanks for watching, please hit like, comment and consider subscribing
Martin
#caravanning
Equipment
Gopro Hero 5 Black
amzn.to/2HvtAf4
Hohem isteady Pro
amzn.to/2WBGzUk
Rode Video micro mic
amzn.to/2FjZmYK
Saramonic SR-XM1 mic
amzn.to/2Odc7Zf
Smatree Extendable Selfie stick
amzn.to/2FbQoge
Ulanzi Multifunctional case for Hero 5
amzn.to/2TjCzkJ
Ulanzi Rechargable LED Video Light
amzn.to/2Cu9MEA
Sandisk 32gb Micro SD
amzn.to/2CrpZuu
Smatree Battery Pack and charger
amzn.to/2HItiR5

[@montyspearo]

I installed original MMs using your video, excellent work. Just transferred MM between caravans. Advice in comments on older video said not to shorten wires, paid off for me as cable runs were lot longer on new van. I've auto version, means extra wires which can make fitting them in ducting lot more work also can't manually engage movers during setup to test clearances. Once setup they are definitely nicer to user also probably saver as always apply max pressure. Manual Emover require user to wind them on until green indicator is on, failure to do so could result in runaway van on a slope. Seen one youtube demostrating her MMs with indicator still yellow, was pointed out to her in comments. This probably explains why lot of MM using lever, they are either ON or OFF no middle ground.

[@TheCaravanNut]

Glad the vlog and comments in it helped. Wish I had got an auto engage, manual definitely needs to be well in the green. Thanks for comments, happy caravanning! Cheers

[@lostweekendscaravan]

You did a great job on this Martin. Always good to help folk save some money .Phil👍🙂

[@TheCaravanNut]

Cheers Phil, I’m all for helping fellow caravanners and motorhomers to hopefully save money then they can spend it on holidays 😊 Martin

[@lostweekendscaravan]

@@TheCaravanNut I think we all try to help out but in different ways. Cheers Phil

[@iainbaker4593]

Watched your video 👍. Fitted mine now two hours on my own. Thanks

[@TheCaravanNut]

Record time well done. Took me a bit longer due to filming it 🤣 cheers

[@paulandsarahcaravanlife]

😎👍Well done Martin. When I saw this originally it was perfect for learning how to fit the mover. This Part 2 version is like a refresher course if you dont want to see the Original longer version. Paul

[@TheCaravanNut]

Thanks Paul, I was contacted a while ago by someone wanting to use the vid but had to shorten the vlog, it’s been sat there for a while just thought I would share it as an alternative. Thanks for the support, Martin

[@HitchUpAndTow]

Great video, very informative, big thumbs up

[@TheCaravanNut]

Cheers Mark, it’s an old vlog just edited down to make it shorter. 🙂

[@CaravanChitChat]

Absolutely professional job mate, you make things like this look so easy!

[@TheCaravanNut]

Cheers Aaron, quite a straight forward job really. The hardest part was being lay down under the van! Thanks for the support, Martin

[@CaravanChitChat]

🤣🤣 yes I can imagine, not ideal for a curvaceous fella like me

[@TheCaravanNut]

😂😂

[@ItchyFeetcaravanners]

Not a job I would have attempted, fair play Martin 👍

[@TheCaravanNut]

Back breaking stuff but fairly straight forward, cheers Martin

[@gavinstreetie1473]

Still enjoyed the first one ☝️

[@TheCaravanNut]

Cheers Gavin

[@CaraVanOlogywithBecky]

Very useful vid, definitely worth a re-edit, thanks. From the slightly triangular discolouration on the inside of your chassis I’d guess that a previous owner (I think you said you went for used so you could get higher spec) had an Alko Mammut fitted as the shape looks exactly the same as the tube ends on our Mammut.... great vid, thanks :)

[@TheCaravanNut]

Hi Becky, yes there was a motor mover on it previously. It actually made the fitting a little easier as the access into the caravan for the cables was already there. Thanks for comments and support, Martin

[@Gixer750pilot]

First , my next job after lockdown and I’ve finished refitting the bathroom 🚽

[@TheCaravanNut]

Hopefully we will be out of this soon then we can get out again. Good luck with the bathroom and motor mover fitting, cheers

[@griswald7156]

I’ve been told you can use a 9v battery to gap the space between the tyre and the splined roller..

[@TheCaravanNut]

Right, never tried that. The mover did come with a plastic spacer so just use that.

[@griswald7156]

@@TheCaravanNut my mover was fitted by the dealer so he will insist he gave it to me..