Motorised Hawker Tempest F-2 PR533 G-TEMT 1/72

  Рет қаралды 411

Mike Tombs

Mike Tombs

Күн бұрын

So I saw a video on youtube of the maiden flight of this aircraft after it's restoration a couple of weeks ago. It looked fantastic I have to say.
Straight after I went looking for a model kit to build it. I soon found a decal set and a complete kit were available so I went for the complete kit.
I haven't made any kits from KP in the past as I always thought of them as not very good. This one is not bad. It does some things so well as you would expect from a modern new tool kit but it also does some things not so well and is a bit lacking..
Anyway I still liked it and might venture into the world of KP models again in the future as I see they do some unusual and different subjects...
Hope you enjoy the video.
Please leave a Like and Subscribe
Mike

Пікірлер: 8
@Dirks_NUMA_Files
@Dirks_NUMA_Files Жыл бұрын
Outstanding work, Mike
@307vrr
@307vrr Жыл бұрын
Thanks boyo...not a bad kit to be honest... No I not sponserd 🤣
@DunedinMultimedia2
@DunedinMultimedia2 Жыл бұрын
Outstanding. My next kit is the SBD Dauntless, and after watching your videos, I have to put a motor in it. Thank you for the inspiration. How do you keep them from taking off? I'm worried it will fly across the room and smash into the wall.
@307vrr
@307vrr Жыл бұрын
Thanks very much Robert.... I got plans to do an SBD,Corsair and Hellcat in the future...in 1/72 ofcourse.. (Keep it from taking off)...I usually use a small resistor to slow the prop down...but on this occasion I didn't have one...If you checkout one of my helicopter videos (chinook) you'll see... What resistor is used depends on the prop size and what motor is used.. i.e. 4mmx8mm or 6mmx12mm...also what power is used...1.5v or 3v etc...you have to test and see...there is no one size fits all.... Hope this helps
@DunedinMultimedia2
@DunedinMultimedia2 Жыл бұрын
@@307vrr It helps a lot, thanks so much!
@2ksnakenoodles
@2ksnakenoodles Жыл бұрын
Amazing work! Especially at 1/72, ever thought of doing a corsair?
@307vrr
@307vrr Жыл бұрын
Thanks very much 👍 Yes I will be doing a Corsair in the future....I have one in my kit stash 👍
@Leviwalker617
@Leviwalker617 9 ай бұрын
​​@@307vrrwhen you dowould you br able to display it with its wings folded?
Motorised Italeri H21c Shawnee 1/72
34:50
Mike Tombs
Рет қаралды 4,4 М.
EXCLUSIVE: Hawker Tempest Mk.II MW763 | The First Flight
6:00
Aviation Highlights
Рет қаралды 112 М.
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН
УНО Реверс в Амонг Ас : игра на выбывание
0:19
Фани Хани
Рет қаралды 1,3 МЛН
Flyhawk Dauntless 1/72 scale  A great kit
39:21
Mike Tombs
Рет қаралды 1,7 М.
Inside the Bf-109
23:57
Blue Paw Print
Рет қаралды 454 М.
Basic but brilliant? 1972 Matchbox 1/72 Zero-Sen unboxing, review, comparison
18:29
Matt’s Modelling Memories
Рет қаралды 1,6 М.
Making A Twin Cylinder Engine For My R/C Airplane
34:07
JellyFish Machine
Рет қаралды 986 М.
Let's talk about...REVELL (RANT!) Part 1😡
45:23
Peter Oxley
Рет қаралды 36 М.
The B-29 Turret System: An Expensive, Effective Mechanical Masterpiece
1:07:26
FULL VIDEO BUILD HAWKER TEMPEST Mk.V by EDUARD (1/48)
22:21
ScaleModelAircraft
Рет қаралды 334 М.
How the Lockheed SR-71 Blackbird Works
55:30
Animagraffs
Рет қаралды 6 МЛН
Curtiss P-40M Warhawk. Trumpeter 1/32. Full build aircraft model kit.
43:14
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН