Motorized Bicycle Top Speed stock ZEDA80 40mph Speed Tests 66cc/80cc 2 stroke + NOS? Nitro Deuce 💩

[@broccolihart1]

This was the most entertaining video of the Month of March...thank you!

[@MotoredLife]

Thanks for watching

[@danmurphy1994]

Bike is clearly in very good condition, front tire didn't even hint at wobble on those rough roads at 40mph, nice

[@jeromecabral8440]

Hi Alex I finally got my motorized bicycle ordered from bike berry.and will be here in a week. can't wait. I ordered the stage 4 that will be mounted on an F zero bike

[@KunioTaki]

My motorized bike's max speed was 64 km/h (40 miles/h), with 28" wheels and a 32 T rear sprocket. Everything was stock.

[@MotoredLife]

+Jordán József nice I love the larger tires.

[@ManuelGutierrez-be1ci]

I’m going to put a 32 tooth rear sprocket on my 26 inch beach cruiser hoping to get 40 or 45 mph.

[@Westhelockpicker]

@@ManuelGutierrez-be1ci I have a 32 tooth sprocket on a 26 inch bike and I can hit 40 and it's just a BBR racing engine with high performance head and exhaust. It climbs hills very easily

[@josephtaverna1287]

There's nothing finer 2-cycle running right it's obvious you put your working buddy no doubt sweet bike have a good night take care

[@robertnickel7279]

Always like the looks of your bikes. Love the handlebars on this one.

[@ebperformance8436]

I got mine to 43mph the bike Weighs 65pounds and with me 210 pounds....this is a stock engine during the break in period. Personally I know I can go faster.....But to afraid to go faster.... stock sprocket with 29inch rims. It takes off a little slow but builds up speed...I’m gonna leave it stock, way to dangerous on a very light bike.

[@jackduffy1817]

Early 1960s London, U.K. Great North Road, combing in to Chiswick, Bicycle, Motor on rear wheel, Screaming along at 60 M.P.H. Sounded like a hornets nest on steroids. I'm sure it was one ride Charly sitting on that bike.

[@archielamarr2950]

I would love to know just how fast you went and how long you held that speed

[@killerrush77]

40MPH on a 44 Tooth?!?!?!?! thats crazy RPMS there man! sweet!

[@theone2be33]

killerrush77 i got 36mph stock. But yeah, very high rpm! Lol. Wouldn't ride that fast for long periods. Was just testing it

[@773steve]

WHAT TOOTH I SHOULD GET 36 44 48?

[@theone2be33]

Hacking Cracking there are no "Simple ways." And really anything over 25mph is dangerous. Remember bikes weren't designed for highspeeds. So build at your own risk and be safe. They're not motorcycles

[@bryduhbikeguy]

I haul a mower on an un-expanded'2-kid trailer'and put a 50 tooth.Ican ride up hills without pedaling now,and it accelerates on mild grades loaded.I'm not in it for speed.Without the trailer,accidentally hit 24.7mph.

[@bryduhbikeguy]

I use Synthetic blend Oil at 25:1 with 93 octane fuel.I want my motor to last,so I won't go less oil.I don't smoke with this.Now have about 600miles.

[@frankieelizalde336]

Bro u need too get a upgraded nitrus can made out of cnc there like 20 bucks rn till the price goes up not no plastic.

[@bigedkc0179]

Thanks for these vids I want to buy one of these it's great that you start all the tests the same way nice

[@dakidp97]

Thanks for taking the time to do that breakdown. Informative. I'd favor the 32:1 ratio; Would you agree?

[@MotoredLife]

for a stock setup yes id go 32:1 any race parts 40:1 for sure

[@thirstydogsmith2606]

where did you get a longer throttle cable from? I bought the motor ready bike from bike berry and the bbr stage 4 racing motor. I bought 16" ape hangers and I need a longer throttle cable. Do you know where I could purchase one from?

[@kevinmontoya7318]

I like how you build the motorized bikes mine just fall apart

[@dangerousdoggo5465]

xd

[@jorelldye4346]

You have to rebuild the bike with blue thread lock all over every bolt and nut, then install the engine kit with its bolts soaked in blue thread locker as well. Otherwise, everything will vibrate apart.

[@reddiamond8834]

He has a schwinn. I have a 4 stroke on my 1980 schwinn typhoon. Works awesome.

[@chancewindham1718]

@@jorelldye4346 letting them soak? That's ridiculous and unnecessary

[@jorelldye4346]

@@chancewindham1718 Maybe you would have understood the exaggeration if I said "Dunk the entire kit in a vat of threadlocker". ;) No more literal liquor for you, internet greenhorn.

[@williammorris8158]

I have a cheap flying horse 4 stroke(49cc) on an aluminium frame walmart cruiser bike,had to do some mods but it does 40mph just like it is.The bike weighs about 70 lbs and I'm 190. My biggest problem is flat tires I have kevlar tires with puncture resistant liner added "green slime things" and now self sealing tubes.We'll see how this works out.Love the bike,lots of fun.

[@LightTheBeam2024]

“I’m not going to insert it all the way...” Best bicycle with engine video quote of all time 😂

[@MotoredLife]

Just the tip

[@lexuses3942]

Can’t wait til my new engine arrives. Lol I’m itching! Watching these doesn’t help lol nice bike 👍

[@raydawe7340]

Good work Alex. Didnt get to see everything you did with the nitro setup though. Informative vid

[@MotoredLife]

yes i saw that sorry its not a good set up

[@pgp2880]

listen to the sound of that 2 stroke hell yeah. reminds me of the bikes ive built. badass bro

[@patrickwoodward6597]

Alex What kind of front end is on it and do you have a link?

[@Gary-po3jp]

GOOD running bike dude! I won't tell ya how bad it makes mine look,let's say mine you could pick apples off a tree riding by!stepping up to a zeda80next week would like to be in your power band ,at63 I don't have time to waste!

[@nelsonfeliciano1596]

Alex the NOS ending was funny How fast do you think you were going?

[@MotoredLife]

+Nelson Feliciano about 40. Just got there fast as shit. Hit top speed b4 the light

[@runninggames771]

How do you have the sproket mounted?? I'm trying to find the best way.

[@kolbyhardy6563]

For around $25-$60 on amazon depending on what you get (just mount or mount and sprocket combo) you can get a mount that comes apart and tighens onto the rear hub

[@brandonduff4357]

is your bike a dyno duece like this one with the original hub with a single speed or does it have a nexus 4 speed ? i have a dyno motoglide and the is no way to mount a sprocket with the disc brake.

[@pit_box_me290]

that's all I would need around town. so I pick a good bike and order a kit and I wonder what kind of wear it put on tires.

[@Christisthekeytolife]

U know how to stop that problem? Some good old fashion foam tape between the gas tank and frame, and suggest you make some of your own gas tank holders with some scrap metal

[@johng2779]

You must used a hella long nitro line. The feed on that must been wild when it emptied .. one helluva kick ..love it

[@outcastedobeone4914]

Do you 'dump' the clutch? As in peddle before engagement or do you stop then dump the clutch as you proceeding into the intersection?

[@danmurphy1994]

Great channel, love that you used nitrous 😂😂 subscribed liked and rang the bell look forward to changes you make :)

[@adencox1980]

I just sold my old motor and bought a new one from amazon 80cc

[@tractors4us]

Did your clutch cable and throttle cable both reach okay by adding the ape hanger handlebars?

[@moiusa]

What kind of handle bar are those and are those shock absorbers added on to the beach cruiser?

[@gudgen2004]

Oh my God that bike is dope I love it

[@RSRivera613]

Hey brotha .. question .. was riding my bike to work today n all of a sudden my back tire locked up.. n I can't restart it .. when I pull the clutch in it moves but when I release it back tire locks up.. any ideas on what it could be

[@steve19745]

that goes pretty good

[@johnt634]

How do you increase the fuel when shooting nos? Is it overly rich to begin with? Without extra fuel you will burn a piston. Keep a check on the porcelain of your spark plug, when specks of aluminium appear the piston is melting. Toss the nos, and get a18mm mikuni with about seven inches of intake, and tune it. Nice bike, and remember gadgets make people rich, not horsepower.

[@josephtaverna1287]

Love the old school handlebars very nice bike no doubt and once you get it completely tuned in it's the sky's the limits I'll be interesting to see what it tops out in the final run

[@martinlicht1969]

Cool..careful with wheel(s) hub lubricant burning up as well as the engine going high speeds, but for the short duration, it's awesome. We need 1/8 mile drag race competitions for "funny bike" drag racing.

[@abikelife1481]

I agree brother! A good drag race would be awesome. Get all the big youtube channel guys to meet at the track and see who really is the top dawg!

[@timdaugherty9203]

Hey bro do you sell bikes like that already put together

[@stock7628]

Damn that thing is quick bro for being stock (besides the fact you were going downhill *cough cough* ) lol jp man check mine out!! I'm runnin a Flying monkey but currently doing some mods waiting for some more parts..

[@MotoredLife]

Haha

[@413MassDigger]

Nice,mine fly's like that too,when she's healthy

[@KipIddy]

Did that frame come with that fork? And while we’re at it the handlebars? I’m looking for a fork with some suspension for my huffy beach cruiser but can’t seem to find any for a decent price. That bike is nice and clean looking that’s what I’m shooting for!

[@MotoredLife]

+Kyle Idstein the stock forks did not have the shocks. Those are zoom v1 forks, handle bars are stock. The bike is a DYNO Deuce

[@carysparks6933]

has anyone tried mounting the engine over the rear wheel and if so what was the out come??? bunnyattackercs.

[@armdrop1oh177]

how you yo jeep the chain from.falling off at that rated of speed

[@markus3666]

If it's adjusted properly, it shouldn't fall off. It also helps to have a motor-mounter spring chain tensioner

[@bentaylor8817]

Common sense always helps :)

[@ev-no4oq]

Sorry for the late comment, but how reliable is this engine kit?

[@EcSsAwS]

Stick to 32:1 ratio Mine didn't last very long at 40:1.. Did fine for a month.. Then slowly seized up And I'm sure not doing top speed runs either I average about 20mph puttn around town

[@danmurphy1994]

I would like to see you install a myriad of aftermarket high performance parts, including a tuned pipe, carburetor, air filter etc. Once you add the carburetor and exhaust pipe try filling up the tank with like 103 octane Sunoco 260 GT 'race' fuel. Really its just high octane gas that we cant get at the pump here in the us. Once you add the new carburetor and pipe I believe the compression ratio may increase? Either way it is probably already 10:1 or higher so it would benefit from race gas no matter what folks wanna tell you. If you aren't already using high performance synthetic 2 stroke racing oil then I suggest you try Red Line 2T synthetic racing 2 stroke oil as it has the best performance out there and best reviews. once i switched to it i noticed a 15% or so improved mid range and slight top speed increase on my goped sport scooter. Also idk if this is a geared bike but if you plan on getting more top speed out of it, may want to try a geared Trek or a bike frame designed for engine kit to be attached and jack shaft kit to usher in a much more usable power spread through whatever amount of gears the chosen bike has.

[@michaelgrossman5528]

Funny i use amsoil in my giant scale airplanes and i tried red line right after my da85 had total rebuild and the amsoil was noticeabley way better i can spin a prop that is an inch bigger than the way it ran on red line

[@calbunga5494]

To increase compression . Decrease combustion chamber volume .

[@Jdun-bv9yt]

where do you buy this engine whats is called i for some reason can't find the exact one

[@datnotme9921]

Thats awesome. Ive been watching your vids and subscribed. Whats your thoughts on single speed vs 5 spd with sic bikes jackshaft running those gears? I have a 1988 Schwinn Cruiser 5 or 1954 Monark Super Deluxe single spd. I wanting to put together one or the other but wanted your input. I have a collection of old bike and now this makes these bikes worth collecting. I might do both bikes but whats your take on which you would do first?

[@MotoredLife]

Jack shafts are honestly too much work and upkeep and they ILLEGAL anywhere in the US. you need registration if it has multiple speeds. I have a new SBP HD kit in a box now wont use it.

[@datnotme9921]

@@MotoredLife thanks for your response, appreciated. Idk thanks

[@kevinjanowiak3489]

Do you have a link for them bars I like them ape hangers I’m building a beach cruiser motorized bike with a bobber style mixed in to it I think them bars would fit the look I’m going for

[@maxwellmcarthur9471]

What kit you got to make those Forks work with that bike

[@oblivionblast]

How did the Zoom triple tree suspension forks handle?

[@shanebarrows1867]

Do you still have the bike and how has it held up is it reliable?

[@ChuckHaney]

Is that my sub-woofer... or does that thing really sound that good?

[@robertibarra8531]

Hey doggy. that was awesome i have the zeta firestorm engines and i highly recommend you 80cc junkies great engines built pretty tuff put it this way we have a club about20 guys they have amozon no brand kits and there fairly good don't get me wrong but you want power get a zeta i proved it and so did my boy we are the fastest in this lil town in oklahoma im sure we can be beat but a regular stock against a regular zeta engine i haven't seen one yet but ur vedieos are cool my man peace out 80cc boys.

[@PLATESWEEPER]

Robert Ibarra I would like to join your club. I'm also in okc closer to the moore side of things. I thought I was the only one in this city riding a mb. Zeda mafia all the way!

[@jrok96]

zeda mafia? i don't think that's zeda . they just use the name. they have a youtube channel dedicated to dissing everyone in the market. @@PLATESWEEPER

[@erichengstebeck5549]

Hey bud six sigma sells a all metal nitrous control that is anodized aluniniumand does not leak

[@miguel360kmc]

I would like to see some "buying guides" im very new to all this love it all lol but being new i dont know brands i dont know parts dont know many sites. I turn to youtube and found only 1 real buying guide to motor kits and it SUCKED there are a few that talk about 1 or 2 motors but i would like a good break down of a handfull from different sites price ranges done bye you your clear and to the point and seem to know what you talking about.. maybe even a aftermarket vid for a part 2 different sprockets pipes carbs chains belt drive etc. Thanks love the vids hope you do make a buying guide vid

[@abikelife1481]

Love the ape hanger handle bars. I need a set of those

[@raulsaenz9281]

Because I was thinking about putting one in my beach cruiser see that little motor road just take off like a bat out of hell

[@LuckyTown77]

So if you measure distance where you ran nitrous and take your time from the video...voila. Speed !!!

[@georgerichard7823]

Hi bro!! Nice bike!!! have a question..its not necesary to put an chain pully tensioner on the frame?.

[@marcs4091]

It's doable but it's tough to get it done without a tensioner. On one of my bikes I put about 300 miles on it when it was new woth no tensioner. Ran great and then all the sudden one day I guess the change stretched a little bit. Could never get it to run right without popping the chain after that.

[@ghostbombl8034]

How do you keep your engine running when you stop?

[@thewaffle3945]

its been 6 years and im wondering is youre bike engine still alive or not

[@TheChampRekts]

I have a HP carb with a NT carb jet in it. What oil ratio do you recommend I try? I’m running 50:1 now and topping out at 22mph, but I’m sure I can go faster.

[@frankmcgarry3155]

TheChampRekts 32:1 is what I run. 50:1 is too lean.

[@TheChampRekts]

Thanks I've started to run that and my bike runs much better now!

[@raybosflorida4928]

that looks like fun!! i dont get when is nitro used????

[@exsposeaccount1210]

I can’t wait to get mine and I’m so glad you know how to ride everyone I watched let go of the throttle bc they think it’s gonna blow up when it’s not it’s a 2 stroke its gonna sound like that

[@MotoredLife]

Yeah wide open for days. These lil engines arnt fragile if you take care of them!

[@exsposeaccount1210]

@@MotoredLife how fast would stock get me

[@MotoredLife]

@@exsposeaccount1210 stock engines hit 35-40 out of the box. Honestly i bought a $100 ebay engine the other day to try out this new hydraulic clutch. The clutch ehh, the engine hit 35 and does wheelies out of the box! If you break them in right they will last forever

[@exsposeaccount1210]

@@MotoredLife thank you bro at least you know the real mph and yea my buddy has one and he had his for like 6 months now and it still runs amazing

[@freelancerider100]

I had no problem getting 32-35mph... But the chain is making a crazy amount forces! To go faster than 40 it has to converted to a belt drive or something. That amount of chain is just too much force for a bike chassis and wheel... In my opinion

[@MotoredLife]

freelancerider100 415H chain

[@bryduhbikeguy]

I have a metal gear replacement for the Tensioner,but am going to add back the plastic 'thing'on a spring to keep out chain 'wobble'.I hate it when the chain stretches,and you can see the flex.I've just done 4th tighten on new chain and see 1/2" flex and can feel it riding.

[@AirCooledArmy]

Hey sorry I'm still a noob at motor biking but what does it mean for your engine to be balanced and how do I get mine balanced ????

[@MotoredLife]

+Devlin Melton its a balanced crank. So hole are drilled on the crank weight to off set the weight of the crank shaft.

[@danielgehrke1770]

I'd like to try to find a way to get ahold of chaos Customs I live in Illinois but I'm up by the Wisconsin border of Illinois and I need to find somebody around here that I can work with if I need parts and help with the building

[@OutlawRC]

Kaos Kustoms Garage just google them or they're on Facebook.

[@Westhelockpicker]

I ordered a nitrous kit for my phantom 85 V3 but you can't buy extra cartridges you have to buy another kit which sucks

[@MotoredLife]

You can go to a head shop and buy whip it refills. It is nitrous

[@yboohcs]

Nitro funny bicycle. It was cooking did you notice any nitro engine damage and how long were you pushing the nitro.

[@MotoredLife]

Not really that engine went on several bikes after this video

[@stormchasingcny954]

What cylinder head would have more power and speed?

[@MrTrilob]

What size wheels those are 26" 28"??

[@kaneto88]

Does this nitro system do something to add more fuell or it simply sprays only nitro?

[@MotoredLife]

Georgi Kanchev just nitrous

[@damnthiccassboye7138]

Are you during break in???

[@alexanderpierce8216]

Motored life be honest I have a 26 inch bicycle right and I have lots of hill's here am in Jamaica which engine would be the best suited.

[@MotoredLife]

All about ur sprocket sized. Got for a 44t

[@alexanderpierce8216]

@@MotoredLife Oh so that's the trick am planning on buying a BBR Racing Series 66/80 cc 2 stroke engine kit.

[@alexlitovchenko6121]

I’ve noticed that the break in period is slow and sluggish, when will I get a engine that goes at least 30? How many miles is a break in?

[@bryduhbikeguy]

As long as you keep varying the speed,and not try for Top constantly.You will start seeing top end after 400 miles.I've done weight on the bike,and seldom push to top rpm.I do that 1-2 times a month for few seconds,(10-20) outside of town.Now that I'm over 600.it Rpm's like his.

[@bryduhbikeguy]

As in previous posts,I Always use 93 oct,and synthetic-blend 2cycle oil.I'm running Penz,Marine.Was doing Quicksilver for first 6 tanks.Hope you all have Awesome rides too.

[@microfarmers]

Which octane fuel do you use?

[@bobbill9460]

How do you keep the motor mounts o. Mine keep falling out no matter how tight I put them

[@MotoredLife]

The stud or the nut?

[@marcs4091]

Double lock nuts can't go wrong

[@Nvent1]

So cool, my son and I both have stock zeda 80, but can't seem to go past 30 that's with peddling. Any tips? Anything helps thanks

[@MotoredLife]

Do you have the stock exhaust end cap in?

[@Nvent1]

@@MotoredLife yes stock exhaust everything still stock. It's only about 8 months old

[@MotoredLife]

@@Nvent1 what oil ratio you running?

[@Nvent1]

@@MotoredLife 32:1

[@thewaffle3945]

@@Nvent1 idk if u have it still but if u want on fully stock have super quick bike then do steps what i did 24 inch wheel on back gives better acceleration and top speed by 7mph and 32T rear sprocket it will increase top speed by like another 7-10mph

[@eswing1436]

Give me like that motor please for my lowride please

[@tristanarmani]

Do you get pulled over on your bikes

[@dillongates4520]

These motorized bike cant get pulled over it a bike bc it has a padel on it so u can use a motor or use ur feet if has no padel u can get into trouble

[@bryduhbikeguy]

I ride mine below 20mph,and still have Pedals,so it's considered 'Assited',but many States are different.If you don't ride without a helmet,and race like this..(No offense Intended,as you probably know when and where to test)....

[@robinj357]

What kind of frame is that? It's pretty cool you can ride yours on the street around here I can't ride mine. ( Only when the cops aren't looking lol)

[@MotoredLife]

+robinj357 its a DYNO Deuce. Are they illegal where you are at?

[@robinj357]

Yeah because there's no registration. I do ride mine on back roads just no County Roads or state or federal highways. It's considered a motor vehicle which needs registration

[@MotoredLife]

+robinj357 is it illegal it ur state?

[@bryduhbikeguy]

Bummer.If under 20mph use here,is 'assist',so same as you drive tests.

[@dillongates4520]

Which oil and gas ratio is better

[@phoenixarizona8441]

You in Indiana building behind looks familiar at 0:41

[@Ressiedevil]

What type of bike is that?

[@tommy23490]

I built a few of these.. I got them to run between 55 and 60 mph.. Mine had a lot of stuff done to them.. Some people may not believe me but it's true. If you want any pointers hit me up..

[@o0Macgruber0o]

what all mods where done and what brand engine

[@tommy23490]

Couple different brands of engines.. Lots of port work, cutting on the piston, higher compression head, aftermarket intake and larger carb with proper jetting.. Also a expansion chamber pipe I did work to.. used the billet rear sprocket mount with a few different gearing options.. I would say proper porting and a pipe you'll see the biggest gains. I also designed a spring loaded chain tensioner. You'll need something similar at those higher speeds. I'll add more if I remember something, it's been about 9-10 years ago.

[@o0Macgruber0o]

@@tommy23490 I just bought one of the Chinese motors I weigh 220 and I've already built one working on my second build the first bike would go 25 with everything stock and probably a little heavy on the oil to gas ratio. The new build I'm spending more money to get a 36 tooth high compression head $20 "performance" carburetor. I'm waiting on the engine currently

[@o0Macgruber0o]

@@tommy23490 is there any books on porting 2 strokes

[@tommy23490]

Yeah lots of them..

[@vickmora9476]

so what's the best motor bike for a hill not a very steep hill just an average hill

[@MotoredLife]

Any with a 44t rear sprocket

[@BuildBreakFix]

I dont get why these kids keep changing the oil ratio in a 2 stroke that calls for 32 to 1. Your not improving the motor changing it out of spec like that. You just jet a 2 stroke correctly and set it up correctly oil ratio wont matter the start with. You all think its giving you more power lol.... Your just shorting your motors life. Anything that motor does on 32 to 1 it can 40 to 1

[@eddiemay8211]

Put a chain saw plug itta go 60 plus.mine runs over 60 without hitting the nitrous

[@johnargue2977]

My bike top speed is 30mph. Stock everything, 44tooth, I wonder if octane booster helps more speed,

[@MotoredLife]

Nope. Lol

[@atmosrepair]

What bicycle was that? It is perfect for this.

[@MotoredLife]

It was my favorite bike. Dyno Deuce this one actually was stolen the other day!! Such a shame

[@atmosrepair]

@@MotoredLife oh that is a bummer. They must have based the design on very old style bicycles

[@cynthiaroesner1719]

Any tips on how to get my engine to rev higher? Right now I can go about 30 with a 44 tooth

[@MotoredLife]

Better carb, expansion chamber, smaller sprocket, high compression head.

[@cynthiaroesner1719]

@@MotoredLife yep, the good old fashioned mods. But now considering a 36 or 40 tooth

[@miguel360kmc]

How about some types... i been looking at the zeda kit with dio reed and window piston oko carb. Names i know from my scooter tuning but these 2t bikes are a new love and im lost at to what is better. I have a 50mm flying horse kit now near the end of its life all stock hitting 30mph avg seen 37mph on my gps but there was hills lol So my questions whats the better pipe? Long short fat? Carb I've seen a few nice ones but they dont have the primer thing is that ok? Mine seems to start better with it.. Cdi/coil sparkplug im getting a ngk set. I've seen watercooled motors that would be cool but i like that my motor is hidden bye my legs makes it easier with cops being a issue

[@anthonypeters44]

What are your brakes

[@Gothguitarist]

Chain tensioner?

[@Zak_How]

We're u going down hill?

[@theone2be33]

Im building this same kit. First timer. Im curious, did you not use the chain tensioner on your bike? Im thinking if i have chain tight enough that i won't need to install it. That thing looks scary to me. You ever have problems with chain falling off? Great vid. Had me nervous thinking you were gonna crash.

[@frankmcgarry3155]

theone2be33 you can look on e bay or other motorized bike sites for spring loaded chain tensioners they mount on the engine inside the drive sprocket cover.

[@bryduhbikeguy]

I use the Tensioner from the kit,but bought a Steel Sprocket off Ebay for $12.I'm going to get Spring and lever now too,as the chain needs tightening weekly and I want to stop the wobble feel when it's loose,and I don't want the wear.

[@bryduhbikeguy]

The pulley and spring will keep the chain tight against the sprocket aligner.

[@kjsmolik]

Dude put some double stick tape under the tank.

[@MotoredLife]

+kjsmolik yeah for sure

[@electricdeckhead3083]

I use foam roll bar padding around the frame and tighten the tank down onto it, acts as a shock absorber and stops the breaking of tank mounts.

[@ChrisW777]

good idea, thank you!

[@garyjohnson1970]

Or a section of mountain bike tire?

[@masterphotographyps4441]

What fuel you use in

[@kenttrussell5750]

Thanks man Appreciate your valuable input Does adjusting the float height in the carbys bowl help ?

[@MotoredLife]

+Kent Trussell depends on your location jet size and carb

[@raulsaenz9281]

When you just use a big bottle of nitrous the ones they use for the motorcycle