Motorized Bike gets Performance Upgrades!

[@IngenGarage]

This is the 100th video I have filmed, only thing used is a iPhone 8 @4k 60fps. iMovie to edit the videos and just upload the thumbnail(also taken from the phone) and video to KZbin. It got me 1.85K subscribers at the time this video was uploaded! So that proves you don't need expensive cameras, editing software, and equipment to make videos. Yes later I will upgrade but let me know your thoughts on it, and on the bike as well.

[@spudstudios3342]

im just using my phone too lol

[@manmeet4804]

Insane dedication!

[@IngenGarage]

@@manmeet4804 Yes!

[@manmeet4804]

@@IngenGarage I got weight training 6th period what about you?

[@IngenGarage]

@@manmeet4804 I don’t know I haven’t checked yet lol!

[@darkdestroyer2837]

Nice nice. I like it. Keep us updated on the reliability! Awesome when guys get long term results on these bad boys.

[@IngenGarage]

Will do!

[@dirkdiggler4860]

B7hs hits my piston on my stock 80 its a newer engine i ordered this year. Mist of changed the head design a bit but it bent the electrode in. B7hs has 1 or 2 more threads than a z8c or z4c so be careful that it will not hit guys it could cause some serious issues ✌️

[@IngenGarage]

Thanks for the information!

[@aaron2873]

Could you post the link to The performance cdi and magneto you used

[@IngenGarage]

I mainly bought it on Amazon: www.amazon.com/QAZAKY-Performance-Magneto-Ignition-Replacement/dp/B07Y7WZ1QP/ref=sr_1_5?crid=2W4CZRBAXJFR5&keywords=motorized+bike+performance+magneto+and+cdi&qid=1703431798&sprefix=motorized+bike+performance+magneto+and+cdi%2Caps%2C122&sr=8-5

[@aaron2873]

@IngenTechNational thank you, could you definitely feel the difference from the stock to the new one

[@IngenGarage]

@@aaron2873 Not really lol maybe a tiny bit, however it is probably a lot more reliable.

[@kingcoop8449]

I wonder is the red wire the power wire

[@IngenGarage]

The red I believe is the power and black is ground, and blue is AUX. Try switching them around until you get spark and kills when the button is pressed.

[@R_Kyllonen]

Nice !!

[@jasonburque]

Pw80 CDI box and cr80 coil will get you the spark curve your looking for... The big difference in 2 and 4 stroke is the 2 likes the timing retardation as the rpm increase... Only 4 stroke like advance timing as the rpms climb... Nothing likes a fixed timing and That's where the program of the pw80 CDI works the cr80 coil gets you the spark to use a larger gap in the plug .028- .030... .035 is something for automotive gap with stronger ignition system

[@IngenGarage]

Thanks for the information man!

[@jasonburque]

@@IngenGarage you can file down the key a mm 1.5 and fine tune to your specific motor you can go up a heat range in the plug from a ngk B6-7 or 8 HS if it's really hot running if it becomes hard to start or warm up right go back to the hotter plug... Jetting and adjust the carb... It's a lot of little things to get it dialed in for your use for it

[@IngenGarage]

@@jasonburque Alright!

[@Bobs-yer-uncle]

This is very interesting to me would you please tell me how you would wire that up I'd like to try it

[@jasonburque]

@@Bobs-yer-uncle it's got 2 wires I'm assuming the black is ground and the other one is for the hot wire... The Suzuki has a curve to it... Adjusting the key way helps the stock setup some but there flat curve so all your doing is retarding the timing Something to mess around with you can use a star washer with a bent tab to adjust the magnet that's easier than the shaved key Not all the keys are consistent either motor to motor and you want to hold the magnet as you tighten it because it's going to want to turn twords the advance Timing is the one thing that is opposite between 2 and 4 stroke engines 2t want it to retard as the RPM climbs and the 4t advance.

[@kingcoop8449]

Man I need help with mine my Magneto has three wires it has blue black and red and I don't know which one is what but my CDI has black and blue so I have blue hooked up to blue black hooked up to Black but it's no spark still

[@IngenGarage]

The blue I believe is the AUX wire for a head light I believe, apparently you have a "upgraded" version cuz the stock ones have a blue, white, and brown wire I believe. I'm sure you can find wiring diagrams online but try hooking up the red and vise versa until you get it.

[@installergd]

When you put in the 68 jet you mentioned you also moved your needle all the way down. Did you try different needle positions with the 68 other than fully down? Also, did you try different needle positions and different jets when you advanced the timing or when you retarded the timing? I know it's time consuming fine tuning these engines but I'm just curious if you did those things. Nice build by the way.

[@IngenGarage]

I did adjust the needle with the different jets off camera and it didn't really feel like the power was there, the 70 and needle one up from the bottom seems to do the best. Advancing the timing did help all around on this engine. I live in the Southeast so the air is probably a lot more dense than up North in the mountains.

[@John-vw4qz]

Get the mz clone with the typical ebay silencer. Works well

[@IngenGarage]

Alright! Thanks

[@DirectCurrent4u]

Great editing on the video my friend! And Don't change what works! If You want to go faster you might try to do some Intake and exhaust Porting before missing with your timing. An expansion Chamber Exhaust will pick up a little speed and power but it will be loud. And if you try to make it quite it will kill All Your speed and performance. IMHO. Keep playing with it and most importantly have a lot of FUN doing it! And stay safe out there!👍

[@IngenGarage]

Thank you man! Yes I need to keep it quiet mainly but I did do some porting and "polishing" before and it has helped, it seems to be doing good the way it is so far lol!

[@dogsandwich77]

The flathead briggs on one of my mini bikes has a billet flywheel with 30° advanced timing. It also came with a new key that has an offset for 8 more degrees of advance. Looks similar to what you did there with the file. I didn't use it tho, little too much. Never thought about trying to advance the timing on a smaller 2 stroke, I might have to go werck my scooter today! Lol You said your needle was all the way at the bottom? Like at the lowest clip it could be on? Cause that can make the low end sluggish. Pilot jet does the idle, needle jet is just above idle to mid throttle, main jet does WOT. But if it runs, it runs. I definitely dont take you for some dumbass.

[@IngenGarage]

Dang lol, and yeah I meant the clip is all the way at the top so the needle sits the deepest. It still 4 strokes kind of at 1/2 throttle but only when it is not under a load. Where exactly is the pilot jet on these NTs?

[@andrewgonzalez4230]

@@IngenGarage These carbs just have the main jet, only 1. The idle screw moves the slide (no pilot jet) up or down to control the idle.

[@IngenGarage]

@@andrewgonzalez4230 Yeah I know lol, I was talking about the mid range needle that is on the slide. I moved the clip to the top to make it go in deeper to make it a bit leaner.