Motorized Pedal Boat (1 of 3)

Part 2 of 3 • Motorized Pedal Boat (...
Part 3 of 3 • Motorized Pedal Boat (...
Below are links to the items I bought on Amazon.
Pedal Boat with Canopy
a.co/d/hWuyGeJ
Intex Motor Mount Kit
a.co/d/dVQuFpx
Pipe Strap Clamp Hanger (used to attach Motor Mount to the Top of the boat)
a.co/d/3OO3CsI
Hanger, Conduit, 1-1/2-Inch (used to attach the Motor Mount to the Back underside of the boat)
a.co/d/0EvjvDV
Toggle Bolts (Used To Attach The Strap Clamps and Hanger Conduit To the Boat)
a.co/d/5FMbj3s
Electric Motor 55 lb Thrust
a.co/d/1ci2T3t
Motor Extension Handle
a.co/d/9F5cDRz
Dinghy Wheels Kit
a.co/d/9Xo3FV3
Lithium 12V Battery
dakotalithium....
Battery Charger
dakotalithium....
Battery Monitor
dakotalithium....
Battery Power Center
a.co/d/4sYcTVV
Telescoping Paddles
a.co/d/hVOkYqz
Boat Stern Light White All Round
a.co/d/7VCJipO
Navigation Light, Boat LED Bow Light
a.co/d/1k6lmxV
Paddle Holder Clips
a.co/d/dkqoEAO
Neoprene Well Nuts - told attach paddle holder clips to boat
a.co/d/7Ghzqod
Cup Holder for Drinks, Fishing Rod/Pole
a.co/d/6SJ8gA8
Hand Bilge Pump Hose
a.co/d/fNd6u3N
Fire Extinguisher PWC Mariner (bracket installed with above-mentioned toggle bolts)
a.co/d/bTxaNYq
Garage Storage Ceiling Hoist | 4 Point System
a.co/d/9Oj97Qw
Emergency Whistles with Lanyard
a.co/d/8AOaayR
Marine Eco Air Horn
a.co/d/82qYFNb
Anchor with 40ft Rope
a.co/d/7lgYJbj

[@97dsm2012]

I don't ever comment on KZbin and I gotta say that's really really cool.

[@stephendemaso4804]

Thanks to you I am able to outfit our peddle boat!! Thank you sooo much for your ingenuity, information on where to find the parts and video!!

[@Cheatmealsurvivor]

I’m absolutely loving this! Just bought everything online to start my Fourth of July paddle boat project. Thank you for posting this!

[@johnmiller9709]

I'm adding more videos regarding this project, so be sure to subscribe to this channel and get notifications when I add new videos.

[@kristenbeachgirl]

I love this! This would be perfect for me and my teenage son! Maybe I can get him to work on setting this up as a summer project!!!!❤❤❤

[@touristbob9219]

I love this video. Was thinking about doing this to my boat. Making it motorized and more. you just saved me so much time and experimenting and researching. Those wheels are brilliant!

[@darrenfarebrother3837]

kzbin.info/www/bejne/pGSvZ3p6iptqfc0

[@johnmiller9709]

Where there is a will, you will find a way.

[@blownaway421]

Man, I love this build! Thanks for all of the follow up in the comments, this has been super informative! I'm thinking about copying your build for my sundolphin.

[@johnmiller9709]

Glad it was helpful!

[@michaelstarr5861]

I built a transom out of treated wood for mine, and I mounted a big patio umbrella between front seats on a pivoting swivel mount. It also works great for a sail!

[@johnmiller9709]

That sounds amazing. Please post some pictures!

[@ajsystems09]

Want to see pix of this umbrella sail pedal boat pls lol😮

[@justinhohlbein5638]

Do you have a documented step by step video? Products used? I missed that if you do. I've been wanting to add just a trolling motor but this is next level thinking. Thanks. Great idea.

[@johnmiller9709]

I do not have a documented step-by-step video however there is a list of all the products used under the video. I also added hyperlinks so someone could buy them on Amazon.

[@newt2010]

How many people were yelling at you monitor?" Shut off the motor!! What in the hell did you just leave it running? Did you test the battery, and see how long it would run??

[@johnmiller9709]

Ha! That's awesome! I had a regular marine battery at the time and I just bought a 100 Ah lithium battery. I was out for almost two hours with two people and could have kept going no problem. Even with a regular marine battery and three people I would be out for over an hour with two adults and two kids.

[@Elephant_Butte_Lake]

@@johnmiller9709 they use water to keep the motor cool. You'll eventually burn it up like that.

[@jmarcusddm]

Wow. I use my pedal boat pedaling our lake. You had some project. Wow. It looks great.

[@darrenfarebrother3837]

Amazing bushing for peddle boat Pelican range kzbin.info/www/bejne/pGSvZ3p6iptqfc0

[@gregwright392]

I would of liked a closer pic of how the bolts were connected to the lower part of the motor mount, but excellent looking rig.

[@johnmiller9709]

stop the video at 2:36, and you can see how the bracket is secured to the boat. I used 1/8" toggle bolts and Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/... Let me know if you have more questions.

[@chrisvalero1783]

Coolest Pedal boat on the lake. Nice work.

[@georgeturcu5537]

Top notch paddle boat. You did amazing work.

[@nicholasryan7189]

The wheels are a great idea.

[@johnmiller9709]

My first attempt was a major fail because I simply used toggle bolts and silicone, and the boat leaked and took on water. So after that, I literally took the entire boat apart and ended up using three-quarter inch starboard on the inside of the boat and then I ran bolts through the brackets for the wheels then the boat and the starboard material. I used bolts and washers and silicone on all areas and I haven’t had a problem with it since. While the boat was completely apart, I also took that opportunity to run wires on all four sides of the boats for lights and incorporated LED lights on the inside of the boat as well. I also ran wiring for installing the red and green light in front and the white light in the back.

[@urbanshootingexperience900]

Waiting for the 2nd video. Please and thank you. Thanks for the helpful info.

[@johnmiller9709]

Where is the best place to post the second video?

[@urbanshootingexperience900]

@@johnmiller9709 right on your channel

[@poptart8135]

Very cool, now make a video showing it in action on the water! :)

[@rockerdad2]

curious why so much legal stuff on the boat ? if its under 14 feet and less than a 9.9 hp you shouldnt need all the lights etc etc. ??guess its your local laws, sorry never heard of it for a small craft.

[@johnmiller9709]

Yes, anything in Massachusetts that has a motor on it whether it be electric or gas powered regardless of the size has to be registered.

[@yohdiegaming2114]

My state makes us do everything once we put any type of motor on it

[@darkerbrother1]

Rockerdad. The Coast Guard would beg to differ with you

[@donnabaker9841]

Do you have order info for the wheels you attached? We are on a very small lake and looking for a way to easily transport pedal boat from our lake house to the lake. Can’t leave it docked there overnight as there is common ground between our property and the lake.

[@johnmiller9709]

@@donnabaker9841 Below are links to the items I bought on Amazon. Pedal Boat with Canopy a.co/d/hWuyGeJ Intex Motor Mount Kit a.co/d/dVQuFpx Pipe Strap Clamp Hanger (used to attach Motor Mount to the Top of the boat) a.co/d/3OO3CsI Hanger, Conduit, 1-1/2-Inch (used to attach the Motor Mount to the Back underside of the boat) a.co/d/0EvjvDV Toggle Bolts (Used To Attach The Strap Clamps and Hanger Conduit To the Boat) a.co/d/5FMbj3s Electric Motor 55 lb Thrust a.co/d/1ci2T3t Motor Extension Handle a.co/d/9F5cDRz Dinghy Wheels Kit a.co/d/9Xo3FV3 Lithium 12V Battery dakotalithium.com/product/dak... Battery Charger dakotalithium.com/product/dak... Battery Monitor dakotalithium.com/product/vic... Battery Power Center a.co/d/4sYcTVV Telescoping Paddles a.co/d/hVOkYqz Boat Stern Light White All Round a.co/d/7VCJipO Navigation Light, Boat LED Bow Light a.co/d/1k6lmxV Paddle Holder Clips a.co/d/dkqoEAO Neoprene Well Nuts - told attach paddle holder clips to boat a.co/d/7Ghzqod Cup Holder for Drinks, Fishing Rod/Pole a.co/d/6SJ8gA8 Hand Bilge Pump Hose a.co/d/fNd6u3N Fire Extinguisher PWC Mariner (bracket installed with above-mentioned toggle bolts) a.co/d/bTxaNYq Garage Storage Ceiling Hoist | 4 Point System a.co/d/9Oj97Qw Emergency Whistles with Lanyard a.co/d/8AOaayR Marine Eco Air Horn a.co/d/82qYFNb Anchor with 40ft Rope a.co/d/7lgYJbj

[@hermancostine5391]

Hi John, I enjoyed watching your video and I ordered the wheels for my pedal boat. Did you have to take out every staple to get access to the inside of the hull or just the ones in the rear? After mounting the wheels how did you put the staples back in? Awesome job on your boat!

[@johnmiller9709]

I ended up taking out every single staple around the entire boat because I also ran wires for lights. I have six lights around the outside perimeter of the boat front and rear running. Lights are also wired through the boat and I also have some LED lights on the inside of the boat, so that was helpful with the wiring to put the boat back together with new staples. I ended up buying a gun for over 300 bucks and I’d be interested in selling it for $100. I only used it for this project so it was pretty arduous and you have to be patient but it’s pretty cool once it’s done.

[@junovue]

best bass boat ever

[@macky181]

"Legal" so much for the land of the free. Since I've moved here it's more like the land of the permits. Cool conversion though, I was thinking of doing the same but I don't want to pay to register it.

[@jakemerringer7487]

Nice! How did you know where to drill holes to mount the wheels? Been looking for a schematic of the internal frame...

[@johnmiller9709]

There is no internal frame for this boat. It’s just two pieces of plastic top and bottom, glued and stapled together. I simply put the wheels where I thought they would fit the best. My first attempt was a major fail because I simply used toggle bolts and silicone, and the boat leaked and took on water. So after that, I literally took the entire boat apart and ended up using three-quarter inch starboard on the inside of the boat and then I ran bolts through the brackets for the wheels then the boat and the starboard material. I used bolts and washers and silicone on all areas and I haven’t had a problem with it since. While the boat was completely apart, I also took that opportunity to run wires on all four sides of the boats for lights and incorporated LED lights on the inside of the boat as well. I also ran wiring for installing the red and green light in front and the white light in the back.

[@Oleg24777]

Did you ever make a video of launching this paddle boat?

[@johnmiller9709]

Not yet, you can subscribe and when I do I will post a link here and add it to my channel.

[@typeelite9283]

2 years ago yeah, but I’d say rather than splitting the boat open to feed wires through, perhaps cut out an access panel, and feed the wires through via pole, and cut out an exit panel. Measuring, marking, and a steady hand can make the panels nice and clean. Water seal for its lining?

[@johnmiller9709]

Great idea!

[@rckandeggroll]

I've been dreaming of doing this

[@jeff3254]

on the motor mounting bracket, how did you attach the two arms that are under the boat at the rudder/lake level.

[@johnmiller9709]

There are subsequent videos in the links are provided below this video that will show you more of a close-up of what it looks like however, I use a combination of rubber washers, metal washers, toggle bolts, and what is called a hanger bracket used for electrical conduit. I also added an entire list of Parts that I bought on Amazon in the description. You can look at this video at two minutes and 36 seconds and pause it to get a better look at it.

[@justindg21]

Did you just screw straight into the boat for the wheels? Doesn't seem like it would be secure enough.

[@johnmiller9709]

Yes, I literally took the boat completely apart and put three-quarter inch starboard on the inside of the boat and then bolted it through the outside of the boat with silicone on both sides and then used nut washers on the inside of the boat. It’s very sturdy once I did that.

[@gnudad]

Hi John. Nice build! Couple of questions. Firstly, I went with a little 8 foot Sundolphin boat. Similar construction with the halves being stapled together. I understand how you attached the wheels, but I'm very leery of putting holes in the hull. Are you having any water problems and/or did you add drain plugs? I really want permanent wheels and a little bored with having to ratchet strap the ones I made, on and off all the time. Also, I'm not familiar with what starboard is.....other than being the nautical term for "right". Thanks, and again, nice job!

[@johnmiller9709]

I have had no leaks at all since installing the starboard on the inside of the boat and putting bolts through the material and the boat. Starboard is a plastic that cuts and drills like wood and is often used for marine projects. Here is a link to buy it. a.co/d/73ckRnG There is a drain plug located in the front of the boat and that was factory installed. I used marine silicone between the starboard and the hull. Since this video I also took out the paddle and pedals and simply used marine silicone and small plastic circles to cover the holes inside and out.

[@merlin195020]

Switch too a Weize 12v 100ah lithium bat..26.5lbs 80% discharge with two temp sensors

[@johnmiller9709]

Yes! I did switch to a lithium 12 V battery. It is much lighter and easier to handle and I have no worry of it ever going dead while I’m out on the water.

[@bobbyrizzo4172]

Awesome pedal boat. Just bought one looking to customize mine. Only hope it comes half as nice lol. Can I ask what kind of screws did you use and did you use a sealant or silicone when adding accessories. I’m curious about that process . New to boating

[@johnmiller9709]

You can look in the comment section and see a full list of all the products I use. To answer your question more directly are use the combination of bolts, anchor, bolts, and yes, lots of silicone, of course.

[@adddude7524]

Will you upload a video showing this beauty in action?

[@johnmiller9709]

Will do. Where should I put it where you will see it?

[@adddude7524]

​@@johnmiller9709Awesome! Just upload it on your channel?

[@tcracing3wwilliamsjr595]

Where do I got to get mine registered. As you know paddle boats don't come with titles how do I register it to get a sticker and boat numbers for it

[@johnmiller9709]

So the paddle boat that I bought does come with a registration number and a tag located in the back. I would check with your local state water and fishing department.

[@johnnivens7162]

How did you mount the wheels? I don't want to sink.

[@johnmiller9709]

My first attempt was a major fail because I simply used toggle bolts and silicone, and the boat leaked and took on water. So after that, I literally took the entire boat apart and ended up using three-quarter inch starboard on the inside of the boat and then I ran bolts through the brackets for the wheels then the boat and the starboard material. I used bolts and washers and silicone on all areas and I haven’t had a problem with it since. While the boat was completely apart, I also took that opportunity to run wires on all four sides of the boats for lights and incorporated LED lights on the inside of the boat as well. I also ran wiring for installing the red and green light in front and the white light in the back.

[@Ricks2Cents]

All those Bells & Whistles No Music? Or Marine Radio? Lol

[@johnmiller9709]

I hear you! I thought about it and decided that I am out there to enjoy the sound of the water instead of music. I will save the partying when I am out on my brother inlaws pontoon boat.

[@DILLIGAF65]

Check your State regulations,in S.C boats with 5 HP motors or less do not need to be registered, others states have various rules which may apply to trolling motors.

[@johnmiller9709]

That’s great info. Thank you.

[@Cache73]

Very cool, tginking of doing the same but adding a solar panel and using a lithium ion battery to help with charging.. gg

[@johnmiller9709]

I have a 12 V lithium battery battery and it lasts so long that you would never even need solar panels. It’s very light also.

[@brucetraylor8914]

Where did you get the wheels and motor from? I just purchased the dolphin and it wore my legs out in less than a half hour 😂

[@johnmiller9709]

Hi Bruce, I had the same experience! Below are some links to the items I bought on Amazon. Pedal Boat with Canopy www.amazon.com/dp/B00H3603HY/...​ Intex Motor Mount Kit www.amazon.com/dp/B000NNM4BW/...​ Motor Extension Handle www.amazon.com/dp/B001PTHKPS/...​ Battery Charger www.amazon.com/dp/B001PTHKKS/...​ Battery Power Center www.amazon.com/dp/B001PTHKMG/...​ Telescoping Paddles www.amazon.com/dp/B000OF406G/...​ Boat Stern Light White All Round www.amazon.com/dp/B08B14C4TX/...​ Navigation Light, Boat LED Bow Light www.amazon.com/dp/B07RPMJQKT/...​ Neoprene Well Nuts www.amazon.com/dp/B009ERRCSS/...​ Cup Holder for Drinks, Fishing Rod/Pole www.amazon.com/dp/B0065MYZGW/...​ Paddle Holder Clips www.amazon.com/dp/B07DMD8Q3P/...​ Hand Bilge Pump Hose www.amazon.com/dp/B000FZ346W/...​ Fire Extinguisher PWC Mariner www.amazon.com/dp/B07YYXP3G9/...​ Garage Storage Ceiling Hoist | 4 Point System www.amazon.com/dp/B000K10A4K/...​ Emergency Whistles with Lanyard www.amazon.com/dp/B07SCYMKJ2/...​ Marine Eco Air Horn www.amazon.com/dp/B01MY4YTKG/...​ Anchor with 40ft Rope www.amazon.com/dp/B01KE1K9XW/...​ Portable Battery Charger www.amazon.com/dp/B001PTHKKS/...​ Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/...​ Pipe Strap Clamp Hanger, 2 Holes, Galvanized or PVC Pipes, IMC Conduit (10, 1/2 Inch) www.amazon.com/dp/B07WC39L6D/...

[@jameswood678]

@@johnmiller9709 hey thanks for listening all the products that you bought. Yes please do make an updated video because I think you did it the simplest way that's awesome. Make sure and the new video to tell how many of each item you bought. Some things are obviously only one but some of them I wasn't sure if you need too or maybe more. Also show how you lower the Bimini top and are able to open and close a standard garage door with that thing sitting up against the ceiling. Also does the motor mounts interfere with the ability of the rudder to turn completely in case your battery dies and you really do need the paddle back. Thanks for showing how you did that. I did not know that they even made Parts like that for some of them. Also how long of a motor extension handle you got.

[@roylamb7047]

Hey James, you did some great stuff to your pedal boat, I saw the question asking you where you get them wheels, I saw a lot of the items and places where you can get most of them, but I don't see where you found the wheel's, please let me know. Thanks you Roy

[@reneebaoquynhtran8834]

Nice paddle boat there. Where you get the wheels and does it need special glue so it wont sip water inside?

[@johnmiller9709]

The links for the wheels are below. I had to take the boat apart and use 1/2" thick Starboard on the inside of the boat to make it rigid to hold the bolts and I also use marine-grade silicone inside and out. C-Tug Dinghy Wheels Kit www.amazon.com/gp/product/B07L37YMXT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@ajsystems09]

Hi are you sure you used size #3 conduit hanger? I think you used size 0 or 1. #3 seems too big for the motor mount which is only 1/2” in diameter

[@johnmiller9709]

Not really sure now. It has been a long time.

[@ajjamil1627]

Thx for the quick reply, were the motor mounting points sturdy enough with the motor thrust when in use? Im worried they would just snap

[@johnmiller9709]

@@ajjamil1627 yes, they are very sturdy. I've been using it for years and it is completely fine.

[@massholetv5353]

Cool idea 😎

[@tonyfuentes544]

Man this is really cool...What was the total of cost of this build?

[@johnmiller9709]

Thanks, man. I appreciate it, I have been afraid to add up the entire cost, but I did include a list of everything in the comments above. I could've just bought a regular boat by the time I was done. Lol.

[@tonyfuentes544]

Sounds about right..lol..ill check out your list...did you use any sealant or the sort for any of the screws/bolts holes drilled for the wheels?

[@johnmiller9709]

My first attempt was a major fail because I simply used toggle bolts and silicone, and the boat leaked and took on water. So after that, I literally took the entire boat apart and ended up using three-quarter inch starboard on the inside of the boat and then I ran bolts through the brackets for the wheels then the boat and the starboard material. I used bolts and washers and silicone on all areas and I haven’t had a problem with it since. While the boat was completely apart, I also took that opportunity to run wires on all four sides of the boats for lights and incorporated LED lights on the inside of the boat as well. I also ran wiring for installing the red and green light in front and the white light in the back.

[@officerM1911]

Too friggin cool! I am in thre process of doing the same

[@johnmiller9709]

Good luck my friend, let me know if you have any questions.

[@rebeccadietrich8925]

This may be a silly question but when you're using the motor do the pedals spin? Can you keep your feet on them or will that slow the boat down?

[@johnmiller9709]

That is actually a really good question. The pedals do spin and they do get in the way of your feet. I ended up taking the pedals out completely and sealing the holes. It doesn’t make the boat any faster but it allows you to put your feet anywhere you want in the front.

[@rebeccadietrich8925]

@@johnmiller9709 I would like to keep the pedals but can you put your feet on them to stop them from spinning?

[@joeyalls6095]

Do you have a step by step video on how you did this amazing work my main concern is how did you run the wiring for your navigation lights and how did you seal the holes you made in the back bottom to mount the motor mount

[@johnmiller9709]

I put rubber washers on each side of the bolts to create a waterproof seal where I mounted the motor. As far as running the wires, I took the boat apart completely, which was a huge project and was an even bigger project putting it back together. It did allow me a fantastic opportunity to simply run the wires anywhere I wanted to under the boat and up through a mounted switch that I can send you a video of in the future. I also added 1/2-inch thick starboard blocks on the inside of the boat to help me properly secure the wheels in the back.

[@ryanmandree]

@@johnmiller9709 Can you send links to the rubber washers and toggle bolts you used--or the sizes of each? Where did you use the neoprene well nuts?

[@johnmiller9709]

@@ryanmandree every single part for the entire entire boat is listed in the comment section above with links to Amazon

[@johohisnim1496]

Why are fire extinguisher? There is a large body of water around you! Lol

[@robbinfuqua7107]

Where did you get those wheels?

[@johnmiller9709]

Below are links to the items I bought on Amazon. Pedal Boat with Canopy a.co/d/hWuyGeJ Intex Motor Mount Kit a.co/d/dVQuFpx Pipe Strap Clamp Hanger (used to attach Motor Mount to the Top of the boat) a.co/d/3OO3CsI Hanger, Conduit, 1-1/2-Inch (used to attach the Motor Mount to the Back underside of the boat) a.co/d/0EvjvDV Toggle Bolts (Used To Attach The Strap Clamps and Hanger Conduit To the Boat) a.co/d/5FMbj3s Electric Motor 55 lb Thrust a.co/d/1ci2T3t Motor Extension Handle a.co/d/9F5cDRz Dinghy Wheels Kit a.co/d/9Xo3FV3 Lithium 12V Battery dakotalithium.com/product/dak... Battery Charger dakotalithium.com/product/dak... Battery Monitor dakotalithium.com/product/vic... Battery Power Center a.co/d/4sYcTVV Telescoping Paddles a.co/d/hVOkYqz Boat Stern Light White All Round a.co/d/7VCJipO Navigation Light, Boat LED Bow Light a.co/d/1k6lmxV Paddle Holder Clips a.co/d/dkqoEAO Neoprene Well Nuts - told attach paddle holder clips to boat a.co/d/7Ghzqod Cup Holder for Drinks, Fishing Rod/Pole a.co/d/6SJ8gA8 Hand Bilge Pump Hose a.co/d/fNd6u3N Fire Extinguisher PWC Mariner (bracket installed with above-mentioned toggle bolts) a.co/d/bTxaNYq Garage Storage Ceiling Hoist | 4 Point System a.co/d/9Oj97Qw Emergency Whistles with Lanyard a.co/d/8AOaayR Marine Eco Air Horn a.co/d/82qYFNb Anchor with 40ft Rope a.co/d/7lgYJbj

[@rechargechea1155]

Did you purchase the boat from a store? If so did you use the MSO to get it registered? I'm having rhe hardest time getting it register due to the required info on the MSO

[@johnmiller9709]

Yes, I bought it from Dick’s Sporting Goods and they completely screwed it up and never gave me the correct information or slip of paper. I needed to get it registered. I ended up having to go to the store three times before I could actually get it registered. The manager and none of the employees knew what the heck they were doing. It was an absolute waste of time and a complete disaster, but I finally got it figured out. I sincerely wish you the best of luck.

[@rechargechea1155]

Yeah I'm going through hell and high water as well with tractor supply. None of the employee, store manager, even district manager have any clue what to do or provide. I'm going to the DMV for the 3rd time. Hopefully I got all the required paperwork this time. Fingers cross!

[@johnmiller9709]

@@rechargechea1155 Yes! It is insane that they can sell boats and no one can register them. I too went to the registry three times.

[@StarD435]

Do you have to register something like this if it has a motor hook up?

[@johnmiller9709]

Yes, anything with a motor has to be registered whether it is electric or gas.

[@FishHeadsIV]

How did you reseal the hull? Did you heat treat then silicone or restaple? Any vids of this pedal boat on the water and being launched?

[@johnmiller9709]

I used silicone and I also re-stapled the entire haul. I would tell you that it was extremely arduous and painful procedure but I got it done with a lot of patience and persistence. No other vids at this time.

[@FishHeadsIV]

@@johnmiller9709 how has that held up? I know everyone complains about HDPE being a pain in the butt to stick anything to.

[@johnmiller9709]

@@FishHeadsIV it’s held up very well since I bolted and siliconed it.

[@Dagardmusic]

Hey John,how hard was to mount the engine?Where can I find the bolts you used to secure the mount?I just got a new one and want to mount the engine.Thank you

[@johnmiller9709]

It was not that hard to mount it, I needed to find the right brackets and here is a complete list of everything that I bought for getting the boat to where it is. Have fun and let me know if you have any other questions I am happy to help. Below are some links to the items I bought on Amazon. Pedal Boat with Canopy www.amazon.com/dp/B00H3603HY/...​ Intex Motor Mount Kit www.amazon.com/dp/B000NNM4BW/...​ Motor Extension Handle www.amazon.com/dp/B001PTHKPS/...​ Battery Charger www.amazon.com/dp/B001PTHKKS/...​ Battery Power Center www.amazon.com/dp/B001PTHKMG/...​ Telescoping Paddles www.amazon.com/dp/B000OF406G/...​ Boat Stern Light White All Round www.amazon.com/dp/B08B14C4TX/...​ Navigation Light, Boat LED Bow Light www.amazon.com/dp/B07RPMJQKT/...​ Neoprene Well Nuts www.amazon.com/dp/B009ERRCSS/...​ Cup Holder for Drinks, Fishing Rod/Pole www.amazon.com/dp/B0065MYZGW/...​ Paddle Holder Clips www.amazon.com/dp/B07DMD8Q3P/...​ Hand Bilge Pump Hose www.amazon.com/dp/B000FZ346W/...​ Fire Extinguisher PWC Mariner www.amazon.com/dp/B07YYXP3G9/...​ Garage Storage Ceiling Hoist | 4 Point System www.amazon.com/dp/B000K10A4K/...​ Emergency Whistles with Lanyard www.amazon.com/dp/B07SCYMKJ2/...​ Marine Eco Air Horn www.amazon.com/dp/B01MY4YTKG/...​ Anchor with 40ft Rope www.amazon.com/dp/B01KE1K9XW/...​ Portable Battery Charger www.amazon.com/dp/B001PTHKKS/...​ Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/...​ Pipe Strap Clamp Hanger, 2 Holes, Galvanized or PVC Pipes, IMC Conduit (10, 1/2 Inch) www.amazon.com/dp/B07WC39L6D/...​

[@Dagardmusic]

@@johnmiller9709 thank you,best wishes!

[@gregabache]

Without the new 100AH battery about how much $$ are you into this project thus far?

[@johnmiller9709]

I’m not really sure however you can look at the section above and see the entire project list and added it all up.

[@genemulcahey9309]

Do you have a link for the motor? how did you attach the bracket to the boat for the motor? Concerned about tearing the boat panel from the torque. Great setup

[@johnmiller9709]

Stop the video at 2:36, and you can see how the bracket is secured to the boat. I used 1/8" toggle bolts and Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 Below are some links to the items I bought on Amazon. Pedal Boat with Canopy www.amazon.com/dp/B00H3603HY/... Intex Motor Mount Kit www.amazon.com/dp/B000NNM4BW/... Motor Extension Handle www.amazon.com/dp/B001PTHKPS/... C-Tug Dinghy Wheels Kit www.amazon.com/gp/product/B07... Battery Charger www.amazon.com/dp/B001PTHKKS/... Battery Power Center www.amazon.com/dp/B001PTHKMG/... Telescoping Paddles www.amazon.com/dp/B000OF406G/... Boat Stern Light White All Round www.amazon.com/dp/B08B14C4TX/... Navigation Light, Boat LED Bow Light www.amazon.com/dp/B07RPMJQKT/... Neoprene Well Nuts www.amazon.com/dp/B009ERRCSS/... Cup Holder for Drinks, Fishing Rod/Pole www.amazon.com/dp/B0065MYZGW/... Paddle Holder Clips www.amazon.com/dp/B07DMD8Q3P/... Hand Bilge Pump Hose www.amazon.com/dp/B000FZ346W/... Fire Extinguisher PWC Mariner www.amazon.com/dp/B07YYXP3G9/... Garage Storage Ceiling Hoist | 4 Point System www.amazon.com/dp/B000K10A4K/... Emergency Whistles with Lanyard www.amazon.com/dp/B07SCYMKJ2/... Marine Eco Air Horn www.amazon.com/dp/B01MY4YTKG/... Anchor with 40ft Rope www.amazon.com/dp/B01KE1K9XW/... Portable Battery Charger www.amazon.com/dp/B001PTHKKS/... Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/... Pipe Strap Clamp Hanger, 2 Holes, Galvanized or PVC Pipes, IMC Conduit (10, 1/2 Inch) www.amazon.com/dp/B07WC39L6D/...

[@steventheloc1]

How many people have you had in it?

[@johnmiller9709]

Three adults in the front and two children in the back

[@rebeccadietrich8925]

Hi john, got the motor mount all attached! One last question. Did you put nuts on the bolts of the conduit hangers? And btw, did you have left over pieces from the kit you didn't use? Thanks for all your help. It came out great. Can't wait to get on the river this weekend!

[@johnmiller9709]

I did not use bolts on the hangers and I don’t know what you’re referring to in regard to a kit? And having leftover pieces? I’m glad it’s all working out for you. Have fun on the river.

[@rebeccadietrich8925]

The conduit hangers you linked came with a bolt and nut..lol. Mine did not come with a nut but I had some. I was referring to the motor mount kit. I had 2 plastic bolt thingys left over.

[@johnmiller9709]

@@rebeccadietrich8925 it’s been so long I really don’t remember if I had extra pieces.

[@Trucker-ht8dg]

Awesome build hey I was wondering about a question you answered about the wheels and was wanted to know how hard was it to take apart the boat to install the starboard thanks

[@johnmiller9709]

It was very difficult and it took hours to take the boat apart and put it back together. I had to remove 180 staples each of them by hand with a screwdriver and a pair of pliers. Once you have the boat apart you can run wiring and add switches and lights and all kinds of great stuff like that in addition to adding the starboard. This is some thing I did that is not in this video at this time. Putting it together is also difficult because I had to buy a staple gun that was strong enough to drive Staples through the plastic of each part of the boat. In addition putting the rubber strip around the outside edge is also difficult because you have to heat it with a heat gun in order to stretch and pull it properly so that it fits around the entire perimeter of the boat.

[@Trucker-ht8dg]

@@johnmiller9709 thanks that sounds like a very long process but is it worth it and does it still float fine

[@johnmiller9709]

@@Trucker-ht8dg YES! To me, it was well worth it. I enjoyed doing the work and had a chance to run wires inside the boat. The legally required front and rear lights along with interior blue LED lighting and white lights running along all four sides. In addition, I added a boat switch to operate all the lights.

[@Ricks2Cents]

What is the Motor Bracket actually screwed into just the plastic? The screws holding the wheels on the bottom side wont allow water in?

[@johnmiller9709]

The first time I tried to attach the wheels was an epic failure. I tried using toggle bolts and they ripped out easily and filled the boat with water. I then realized I had to take the boat apart and it was not fun doing that. I had to remove over 180 staples after removing the trim. I placed a rectangular piece of 1/2 inch starboard on the inside of the boat and then ran the bolts that come with the wheels through the wheel brackets of the boat and the starboard on the inside.

[@Ricks2Cents]

@@johnmiller9709 Sounds like a Hell of Allot of Work!!!

[@johnmiller9709]

@@Ricks2Cents It certainly was a lot of work however while I had the boat open it allowed me the opportunity to run wires to add LED lights to all four sides of the boat, blue LED strip lights on the inside of the boat, and Night running lights in the front and back of the boat. I also added a group of switches that connect to the lights.

[@Ricks2Cents]

@@johnmiller9709 Your Definitely the 1st person I have seen with all the lines hidden. That was a Labor of Love.

[@genemulcahey9309]

I am not sure how long of a shaft motor you used, I see its an Endurnace 2 55foot pound but the shaft length 36" or 42"?

[@johnmiller9709]

I bought an extension adjustable handle for $50 and it is awesome. Here is the link. a.co/d/bXLEWLa

[@roylamb7047]

Hey James, you did some great stuff to your pedal boat, I saw the question asking you where you got them wheels, I saw a lot of the items and places where you can get most of them, but I don't see where you found the wheel's, please let me know where I can get them. Thanks you Roy

[@millerrealestateinstitute1836]

C-Tug Dinghy Wheels www.amazon.com/dp/B07L37YMXT?ref=ppx_pop_mob_ap_share

[@millerrealestateinstitute1836]

C-Tug Dinghy Wheels www.amazon.com/dp/B07L37YMXT?ref=ppx_pop_mob_ap_share

[@johnmiller9709]

The first time I tried to attach the wheels was an epic failure. I tried using toggle bolts and they ripped out easily and filled the boat with water. I then realized I had to take the boat apart and it was not fun doing that. I had to remove over 180 staples after removing the trim. I placed a rectangular piece of 1/2 inch starboard on the inside of the boat and then ran the bolts that come with the wheels through the wheel brackets of the boat and the starboard on the inside.

[@johnalex3023]

Where did you get the wheels? And how did you mount them without compromising the hull?

[@johnmiller9709]

The first time I tried to attach the wheels was an epic failure. I tried using toggle bolts and they ripped out easily and filled the boat with water. I then realized I had to take the boat apart and it was not fun doing that. I had to remove over 180 staples after removing the trim. I placed a rectangular piece of 1/2 inch starboard on the inside of the boat and then ran the bolts that come with the wheels through the wheel brackets of the boat and the starboard on the inside. Here is the link for the wheels. www.amazon.com/gp/product/B07L37YMXT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

[@johnalex3023]

Thank you for the response . I’d like to be able to do that. I have a running project on a Contour Commander paddle boat. It’s a big paddle boat (58”w x 118”l.) I’m in the process of looking for a slow leak. I’ve replaced the bearings for the paddle, and taken apart the steering arm. I used silicone when I put both back together, but I still get some leakage. Problem is that this boat is made out of ABS, and the seam where the deck and hull meet is glued.

[@PhuongNguyen-gl3gi]

Tuyệt vời 👍👍👍

[@danl5632]

The original rudder is still attached. Does that affect your steering, when you are using the trolling motor to steer?

[@johnmiller9709]

Hi Dan, it does not affect it at all. I have since removed the pedal assembly and the rudder assembly and other than it being lighter there is no significance in performance.

[@danl5632]

How did you register it? Is HIN and notarized Bill of Sale good enough?

[@johnmiller9709]

Yes! However, I would call your local registry to be sure. I had to make two trips back to Dick's Sporting Goods because they did not give me the right info I needed to get it registered.

[@johnmiller9709]

@@danl5632 I bought this about 5 years ago, so I don't remember all the details. I would certainly call your local registry just to be sure.

[@resoluteretreat1532]

Can you explain more on how you attached the trolling motor?

[@johnmiller9709]

I bought and used the "Intex Motor Mount Kit for Intex Inflatable Boats" as the motor mount and then I used toggle bolts and metal hole straps to hold down the top and steel conduit hangers and toggle bolts to attach the bottom of the bracket to the back of the boat. I would like to recommend this product at Amazon Intex Motor Mount Kit for Intex inflatable Boats More information: www.amazon.com/dp/B000NNM4BW/ref=cm_sw_em_r_mt_dp_8M8RK7K92WYWAJQ6Q9MX?_encoding=UTF8&psc=1

[@paulsheffield4729]

How did you load and unload from your roof rack?

[@johnmiller9709]

I will make a video in the future that shows exactly how I load and unload it from the roof rack. I took two 2 by 4 and strapped aluminum to the ends, and then strapped that aluminum around the roof racks, and I simply slide the boat down the two by fours from the side of the car.

[@saulsalinas1355]

How long does the battery last you out in the lake?

[@johnmiller9709]

Over an hour with a regular battery, but if you by a lithium battery, you can be out there for many hours.

[@joshuareed3674]

Did you have to drill holes to the bottom to install the bottom toggle bolts

[@johnmiller9709]

If you are referring to the motor mount, yes I did and there is where I used the hanger clamps as well.

[@16driver16]

How did you waterproof the bolt holes for the wheels on the back? Silicone or rubber washers?

[@johnmiller9709]

I used both and I also added 1/2-inch thick starboard blocks on the inside of the boat to help me properly secure the wheels in the back.

[@16driver16]

@@johnmiller9709 right on, I don't have any electric power on mine(yet) but the wheels would be nice even stock instead of the little canoe dolly things you can buy

[@ryanmandree]

Hey John. Thank you so much for the video. I am stuck in the middle of modifying my boat and was hoping to be able to email you with a question regarding how you mounted the "mount" using toggle bolts, more specifically, the part where "it gets pretty complicated." Is it possible to email you? Ryan

[@johnmiller9709]

stop the video at 2:36, and you can see how the bracket is secured to the boat. I used 1/8" toggle bolts and Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/... Let me know if you have more questions.

[@darrenfarebrother3837]

kzbin.info/www/bejne/pGSvZ3p6iptqfc0

[@kennethbatiste8104]

can you tell me how you attach the wheel to back of the boat, making sure I only drill once?

[@millerrealestateinstitute1836]

The first time I tried to attach the wheels was an epic failure. I tried using toggle bolts and they ripped out easily and filled the boat with water. I then realized I had to take the boat apart and it was not fun doing that. I had to remove over 180 staples after removing the trim. I placed a rectangular piece of 1/2 inch starboard on the inside of the boat and then ran the bolts that come with the wheels through the wheel brackets the boat and the starboard on the inside. I use marine silicone on everywhere and it is fantastic. My most recent advanced purchase is a 100 ah lithium battery, it is half the weight and lasts four times as long. dakotalithium.com/product/dakota-lithium-12v-100ah-deep-cyle-lifepo4-marine-solar-battery/ I want to recommend this product at Amazon KING STARBOARD White 12" X 27" X 1/2" by SIBE-R-PLASTIC SUPPLY LLC Learn more: www.amazon.com/dp/B00VKM36EY/ref=cm_sw_em_r_mt_dp_TSJXND316BV0ME7BK4S7?_encoding=UTF8&psc=1

[@johnmiller9709]

The first time I tried to attach the wheels was an epic failure. I tried using toggle bolts and they ripped out easily and filled the boat with water. I then realized I had to take the boat apart and it was not fun doing that. I had to remove over 180 staples after removing the trim. I placed a rectangular piece of 1/2 inch starboard on the inside of the boat and then ran the bolts that come with the wheels through the wheel brackets of the boat and the starboard on the inside.

[@rebeccadietrich8925]

Another question, what type of screws did you use to attach those conduit pieces that hold the bracket?

[@johnmiller9709]

Those are anchor bolts, 1/8 inch width electrical conduit straps. You can see the entire itemized list in the description.

[@rebeccadietrich8925]

I see the conduit pieces in the description but not the screws to attach them.

[@johnmiller9709]

@@rebeccadietrich8925 the screws you are referring to are actually 1/8 inch toggle bolts

[@rebeccadietrich8925]

@@johnmiller9709 how long? Stainless steel? Sorry I'm a girl doing this alone..lol.

[@johnmiller9709]

@@rebeccadietrich8925 a.co/d/g1ZMLIX

[@1982pantro]

Where can I get those wheels?

[@johnmiller9709]

C-Tug Dinghy Wheels Kit www.amazon.com/C-Tug-Dinghy-Wheels/dp/B07L37YMXT/ref=sr_1_1_sspa?keywords=C-Tug+Dinghy+Wheels+Kit&qid=1660599826&sr=8-1-spons&psc=1&smid=A31HZKVHMVDZ77 The first time I tried to attach the wheels was an epic failure. I tried using toggle bolts, and they ripped out easily and filled the boat with water. I then realized I had to take the boat apart, and it was not fun doing that. I had to remove over 180 staples after removing the trim. I placed a rectangular piece of 1/2 inch starboard on the inside of the boat and then ran the bolts that come with the wheels through the wheel brackets of the boat and the starboard inside.

[@ginovergara551]

Where did you get the trolling motor ?

[@johnmiller9709]

Amazon - There is a complete list of all the parts and links where to buy them in the comment section.

[@francisdoyle2574]

What are the name of those plastic wheels

[@johnmiller9709]

C-Tug Dinghy Wheels Kit for Inflatable Boats, Aluminum Jon Boats, dingies Boats, and Dinghy Raft www.amazon.com/gp/product/B07L37YMXT/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1

[@chrisdix1390]

How did you put the wheels on

[@johnmiller9709]

The first time I tried to attach the wheels was an epic failure. I tried using toggle bolts and they ripped out easily and filled the boat with water. I then realized I had to take the boat apart and it was not fun doing that. I had to remove over 180 staples after removing the trim. I placed a rectangular piece of 1/2 inch starboard on the inside of the boat and then ran the bolts that come with the wheels through the wheel brackets of the boat and the starboard on the inside.

[@chrisdix1390]

Well that is an exorbitant amount of work for a couple of wheels lol I am myself will probably try the strongest adhesive that I can find but yours looks really well done almost factory.

[@johnmiller9709]

@@chrisdix1390 I agree. It was an insane amount of work but it will never leak now and it incredibly sturdy. My advice is to bring a friend strong enough to help you get it off the car and through it in the water.

[@kevinwpatterson]

That door ain’t opening all the way with that back rope attached.

[@johnmiller9709]

I collapse the bimini top, and the boat goes up tight to the ceiling, which allows the door to fully open. :-)

[@lilone187oa]

How did you mount the bottom clamps of the motor mount

[@millerrealestateinstitute1836]

This is what I used and attached them with toggle bolts... Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/...​

[@ryanmandree]

@@millerrealestateinstitute1836 What size toggle bolts? I am having trouble visualizing how you mounted the bottom portion of the mount. The top looks straight forward with what looks like pipe straps bolted straight into the boat? Where/why did you use toggle bolts for the top poles? And you used the Hubbel-Raco conduit and toggle bolts to attach the bottom portion of the mount to the back/bottom of the boat? And rubber washers for water-tight seal?

[@johnmiller9709]

@@ryanmandree stop the video at 2:36, and you can see how the bracket is secured to the boat. I used 1/8" toggle bolts and Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/... Let me know if you have more questions.

[@johnmiller9709]

@@ryanmandree Yes, I did use rubber washers on the bottom side of the motor bracket for a tight seal. For the top of the brackets, I simply used the strap, two 1/8" toggle bolts, and no rubber washer, and you never get water there. I used the neoprene well nuts to attach the paddle holder clips on the side of the boat.

[@steventavarez7068]

Do you have a purchase guide for parts?

[@johnmiller9709]

Below are some links to the items I bought on Amazon. Pedal Boat with Canopy www.amazon.com/dp/B00H3603HY/...​ Intex Motor Mount Kit www.amazon.com/dp/B000NNM4BW/...​ Motor Extension Handle www.amazon.com/dp/B001PTHKPS/...​ Battery Charger www.amazon.com/dp/B001PTHKKS/...​ Battery Power Center www.amazon.com/dp/B001PTHKMG/...​ Telescoping Paddles www.amazon.com/dp/B000OF406G/...​ Boat Stern Light White All Round www.amazon.com/dp/B08B14C4TX/...​ Navigation Light, Boat LED Bow Light www.amazon.com/dp/B07RPMJQKT/...​ Neoprene Well Nuts www.amazon.com/dp/B009ERRCSS/...​ Cup Holder for Drinks, Fishing Rod/Pole www.amazon.com/dp/B0065MYZGW/...​ Paddle Holder Clips www.amazon.com/dp/B07DMD8Q3P/...​ Hand Bilge Pump Hose www.amazon.com/dp/B000FZ346W/...​ Fire Extinguisher PWC Mariner www.amazon.com/dp/B07YYXP3G9/...​ Garage Storage Ceiling Hoist | 4 Point System www.amazon.com/dp/B000K10A4K/...​ Emergency Whistles with Lanyard www.amazon.com/dp/B07SCYMKJ2/...​ Marine Eco Air Horn www.amazon.com/dp/B01MY4YTKG/...​ Anchor with 40ft Rope www.amazon.com/dp/B01KE1K9XW/...​ Portable Battery Charger www.amazon.com/dp/B001PTHKKS/...​ Hanger, Conduit, 1-1/2-Inch EMT / 1-1/4-Inch Rigid/IMC, Steel with Bolt, Size 3 www.amazon.com/dp/B00NLOJ5YE/...​ Pipe Strap Clamp Hanger, 2 Holes, Galvanized or PVC Pipes, IMC Conduit (10, 1/2 Inch) www.amazon.com/dp/B07WC39L6D/...

[@FishingPunk]

@@johnmiller9709 what about the wheels

[@johnmiller9709]

@@FishingPunk C-Tug Dinghy Wheels www.amazon.com/dp/B07L37YMXT?ref=ppx_pop_mob_ap_share

[@midwestexplorer]

Are you selling this?

[@johnmiller9709]

Yes I would be interested in selling.

[@midwestexplorer]

@@johnmiller9709 I’d like to buy it please 🙏

[@johnmiller9709]

@@midwestexplorer sure thing, how much would you be willing to offer?

[@johnmiller9709]

@@midwestexplorer I am thinking of selling it so if you are interested please let me know asap before I start advertising.

[@adriabak7942]

What battery do you use?

[@johnmiller9709]

I use a pretty heavy-duty battery. I went to the local Insterstate Battery store and asked for the most powerful marine battery they could sell me.

[@millerrealestateinstitute1836]

dakotalithium.com/product/dakota-lithium-12v-100ah-deep-cyle-lifepo4-marine-solar-battery/

[@kevins5268]

Lol id take the ticket. Your not gonna get a ticket on paddle boat lmfao

[@MishinFishin]

Where did you get those wheels ????

[@johnmiller9709]

I would like to recommend this product at Amazon C-Tug Dinghy Wheels More information: www.amazon.com/dp/B07L37YMXT/ref=cm_sw_em_r_mt_dp_ZX3Q1AJDZAQTPZX49DVQ?_encoding=UTF8&psc=1

[@oldwortex5818]

@@johnmiller9709 Wow ! Nice wheels but $159/pair ? I have to find something less expensive. This is just crazy ! Great build, will start the project soon ! Just found a slightly used pedal boat locally and already have a trolling motor, mounts, etc. so I'm excited to start it soon.

[@johnmiller9709]

@@oldwortex5818 I found a different pair for less - www.amazon.com/Stainless-Steel-Transom-Launching-Inflatable/dp/B06WLLW2S5/ref=sr_1_8?dchild=1&keywords=boat+wheels&qid=1615942852&sr=8-8 Have fun! I am adding lights and reinforcing the wheels with starboard on the inside of the boat.

[@Adamsik505]

Have u hit the water

[@johnmiller9709]

Yes, I hit the water and nearly sunk the sucker. Unfortunately, the 1/8" toggle bolts and marine silicone I used to secure the wheel brackets to the back let go while in the water and the entire inside filled with water. I basically had eight 3/8" holes in the back of the boat taking on water. The good news is that even if this vessel fills up with water it does not sink. The solution is going to be me separating the top and bottom of the boat getting in the inside and using a piece of rectangular plywood on the inside of the boat while attaching the wheel brackets on the outside of the boat using bolts, washers, and locknuts along with silicone. This should definitely do the job however I need to go out and purchase or rent a "plier stapler" to reattach the top to bottom of the boat that is pneumatic in order to do the job. The staples that hold the top and bottom of the boat together are 5/8 of an inch long and I will have to remove each of the staples and then reapply them with this pneumatic device. To purchase it is around $360. and I haven't found a place that will rent one yet. Doing this will give me an opportunity to run the wires on the inside of the boat as well. I may even add some switches since I'm doing this. I know what everyone's thinking at this point! I should've just gone out and bought a boat! LOL However, I do enjoy doing projects like this and making the impossible, possible.

[@fishingismydrug1]

@@johnmiller9709 If you haven't done this yet, would rivets work. instead of staples?

[@fishingismydrug1]

Also , I thought "MS" was the abbreviation for Mississippi ?

[@johnmiller9709]

@@fishingismydrug1 Thanks for the tip on the rivets instead of staples however I do have the stapler now and removed the over 180 staples out by hand last weekend. Here is a link to the vessel registration abbreviations. You would think they would be the same as the state abbreviations but someone had some extra time on their hands. www.ncwildlife.org/Portals/5/documents/state_prefixes.pdf

[@fishingismydrug1]

@@johnmiller9709 Interesting, thank you sir.

[@ChrisFord-r9z]

As much money u spent could have gotten a real boat

[@johnmiller9709]

There isn’t a day that goes by that I don’t realize that. Lol. One of my motivations for moving forward with this project was that I simply wanted to be able to get out onto the water and spend some time wherever I wanted. The benefit of this boat is that I can strap it to the ceiling in my garage in my condominium. I don't have a yard to store a regular boat in, and I don't have to pay for additional storage for a boat. It's handy and available whenever I want it, and it just drops right down on top of my car, so I can take it to any body of water without any storage fees or motor maintenance.

[@johnmiller9709]

This is where my inspiration came from... kzbin.info/www/bejne/m3SlnoynhKdqd5I

[@jameswood678]

Thanks for answering questions that are very specific. NOT. Interesting video, but extremely lacking in details and when asked for details the lazy poster of the video just ignores and deletes questions that require thought. Thanks for the idea, though. That's all it is.

[@millerrealestateinstitute1836]

Hi James, great to hear from you again. I hope you have a blessed day! Read below... my answers are written in all caps. hey thanks for listening all the products that you bought. YOU ARE WELCOME Make sure and the new video to tell how many of each item you bought. Some things are obviously only one but some of them I wasn't sure if you need too or maybe more. WHAT SPECIFIC ITEMS ARE YOU NOT SURE OF? Also, show how you lower the Bimini top and are able to open and close a standard garage door with that thing sitting up against the ceiling. HERE IS A VIDEO THAT SHOWS YOU HOW TO RAISE AND LOWER A BIMINI TOP kzbin.info/www/bejne/qZ2QoYKtir2Uepo I USE A 4 POINT PULLEY SYSTEM AND IT IS LISTED IN THE LINKS I PROVIDED AND I AM INCLUDING IT AGAIN RIGHT HERE - Garage Storage Ceiling Hoist | 4 Point System www.amazon.com/dp/B000K10A4K/... I LOWER THE BIMINI TOP BEFORE RAISING IT TO THE CEILING. Also does the motor mounts interfere with the ability of the rudder to turn completely in case your battery dies and you really do need the paddle back. NO Thanks for showing how you did that. I did not know that they even made Parts like that for some of them. YOU ARE MOST WELCOME Also how long of a motor extension handle you got. I CAN SEE HOW YOU ARE CONFUSED ABOUT THIS AS THE EXTENSION HANDLE ACTUALLY EXTENDS ITSELF FROM 24" TO 40" AND THE LINK TO BUY IT IS ALSO IN THE LIST ABOVE, HERE IT IS AGAIN IF YOU MISSED IT. Motor Extension Handle www.amazon.com/dp/B001PTHKPS/...

[@tonyb5232]

James it appears you are the lazy one. None of this is truly complicated... just watch the video look and learn. Excellent video.

[@jameswood678]

@@tonyb5232 lazy? You know nothing of me. Stop pretending and mind your business

[@mynameisjson3]

Hello. Awesome rig. Did you ever post the video of loading and unloading the boat?

[@johnmiller9709]

I have not yet, but when I do I will post here in the comments.