Mountain Bike And Handmade Trailer Finally Finished!

[@Jimmyfisher121]

I am an old disabled ex-army vet, and what I did because I am limited in what I can do is, I have a trike sports rider 3 wheeler disability scooter, however it just can't carry all my needs when I go sea fishing, so I bought from amazon one of those wire type garden trailers for at the time under £80 I also bought a bicycle trailer hitch, the male end went on the trailer where normally the hand puller goes, didn't need that so kept for some other project, the female end of the hitch went on the back of the scooters rear bar, I just used self tapping screws, and so far I have clocked up a fair few miles running to the nearest sea beach it carries all I need and I made a folding table for my gas cooker and prepping food the table is just two wooden slabs hinged together and self tappers screwed into the square tubing, if the worst comes to the worst I now can bug out, it is supposed to do around 22 miles, but in the near future I will put two more marine batteries in the trailer as it is 24 volts that should give me quite a few miles more and I would cut the speed limiter and be able to scoot away from bad people. Remember no welding involved at all, Jim from Scotland. love your trailer and bike.

[@Reallybigmonkey1]

Nowe that sounds like a fantastic set up! I may go electric one day but this works for now. Thanks for sharing that Jim and thanks for watching!

[@Branden-i6f]

Really good design, thank you for filming the process to share with us. It's your best trailer yet!

[@ptonpc]

Sounds like a really good set up. (waves from Scotland too).

[@savageoldman]

I guess I am a weirdo, nothing makes me happier than reclaiming and repurposing. Fabulous job!!!!

[@Reallybigmonkey1]

We think alike! I love creating something nice out of junk

[@ColinNew-pf5ix]

A few suggestions if I may: Inside the tubing, you could fit aluminium rods to be used as shelter props. Say 4 x props to make two ends of an A frame. Make yourself 3 or 4 large waterproof bags to fit snug inside the frame. If they're not waterproof, then just cover with a specially made tarp. And finally, try an electric mountain bike Dave. You just can't beat them. They're getting better and better now. Much more efficient. With a spare battery you'll be able to get 60+ miles out of them. They're also a lot safer if you need to get back if you're injured, bitten by a snake whatever. They're excellent for uphill and for carrying heavy loads. Worth considering.

[@Reallybigmonkey1]

All very good points Colin!

[@titoshinshi3742]

One man's junk is another man's treasure . Great job Dave .

[@Reallybigmonkey1]

Absolutely! Im glad you liked it. Thanks for watching

[@mrsjohnson1743]

That turned out really great! Love the side bar bump-outs. They'll help steer brush and branches away from the trailer spokes. Now I'd like to see what you will carry for an extended bug-out or camp. 😆

[@Reallybigmonkey1]

Thanks, Im glad you liked it. As soon as the heat wave dies down Ill do an overnighter with this. Thanks for watching

[@branch_preparedness]

Excellent job. Thank you for bringing us along.

[@Reallybigmonkey1]

Thanks, I'm glad you liked it

[@1leg956]

@@Reallybigmonkey1 I just love your thoughts process you give us all inspiration to not throw certain things away you said it vest bigmonkey you don't have to buy everything peace and love from 1 leg uk England

[@rayditzenberger9517]

I have ridden bikes for 70yr and did untill my back messed up about 2 yr ago. It is a shame that bikes are not utilized by more people. Thk 4 posting this. It may get a few off the couch and into the fresh air.

[@Reallybigmonkey1]

The older I get, the less I like to bacpack in heavy weights. Bikes are the way to go! Im glad you liked it. Thanks for watching Ray

[@jasonscreativeadventures3900]

Cool Shirt! Love the bike and trailer dude!

[@Reallybigmonkey1]

Thank you Jason!

[@mikerandle5713]

Dave, I really liked the upcycling of the old bikes! That trailer is the coolest! Your expertise in metalwork is obviously what makes you go.

[@Reallybigmonkey1]

Thanks Mike! I'm glad you liked it and I love how well it turned out!

[@pacificbushcraftandfirecra6358]

This was awesome to see the evolution of your functional creation! You engineering skills are very proficient. Thanks for sharing with us!

[@Reallybigmonkey1]

Thanks, I'm glad you liked it. I was very surprised at how well this whole project came together just like I'd hoped for! Thanks for watching brother

[@Ladythyme]

Excellent! I love being a fly on the wall and seeing you create your ideas into fruition! So fun!

[@Reallybigmonkey1]

Thanks, Im glad you liked it. No telling what Ill dream up next! Thanks for watching

[@blademan175]

Very nice bike and trailer! Thanks Dave for showing us your creation!

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Thanks for watching

[@KarlRoyale]

This is the kind of thing you can do when you have a solid skill like welding. Fantastic build, very creative.

[@Reallybigmonkey1]

Thanks Karl, I'm glad you liked it

[@zentricksta4]

Very cool! Now you just need to turn the trailer into a popup camper or chuck wagon kitchen!

[@Reallybigmonkey1]

Thanks, I'm glad you liked it and that's an interesting thought!

[@mussydesign7933]

i missed yr building videos, its been a while im so glad that you have the time to share yr knowledge with us, thanks dave

[@Reallybigmonkey1]

I love doing the build video but man they take a lot of time! Thanks for watching

[@TerryC69]

Hi Dave! Very impressive build!

[@Reallybigmonkey1]

Thanks, Im glad you liked it Terry!

[@scubyhurst1119]

You are brilliant , love the build .. very inspiring. Wonderful.

[@Reallybigmonkey1]

Thank you my friend!

[@stuartlockwood9645]

Hi Dave ☺ neet build , and if you put u testing time round your garden whith various loads you'll soon find out if you have a week spot in the build, better than a major break way out in the woods, but you look to have a good useful setup there, and I whish you happy trails whith it. Cheers mate, stay safe, best wishe's to you and your's, Stuart UK.

[@Reallybigmonkey1]

Good point! I really need to overload it with weight and test it at home. Thanks for watching Stuart

[@IntenseAngler]

The bike and trailer sure turned out awesome Dave! Your hard work and ingenuity is always inspiring my friend! I love seeing "trash" turned into treasures like this man! All the best my Brother!

[@Reallybigmonkey1]

Thanks brother, I'm glad you liked it. I love cheap and free but it's also very satisfying to see junk turned into something useful. Take care and thanks for watching brother John

[@IntenseAngler]

@@Reallybigmonkey1 You're more than welcome buddy :) I definitely hear ya about the satisfaction of seeing junk turned into useful things. Take good care my Brother.

[@InVinoVeritas.]

Wow, great build, you are a true master craftsman Dave!! Now all you need is a side car for Nick!! 😂😂

[@Reallybigmonkey1]

Thank you my friend! Lol, I need to see if I can haul Nick around with this.

[@haroldmiller6853]

Dave = mad scientist of bushcraft lol love it awesome build looks like it will work well for you . Thanks for sharing

[@Reallybigmonkey1]

Thank you Harold!

[@Renman78]

Awesome job. Way to repurpose materials for an ingenious and functional build!!!

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Thanks for watching

[@neva.]

I love your innovative ideas for repurposing discarded trash! Appears to handle well even with all that immense weight bestowed upon it. As far as wilderness living goes, this is the next best thing to a horse! A bike packing trip is half art, half science and a whole lot of brute force, so roll with it. Remember rules are made to be broken and bike packers are rebellious! I enjoyed watching, thank you, Dave. Stay lifted & enjoy your weeks end...! See ya next time.

[@Reallybigmonkey1]

Thanks, Im glad you liked it. and all very well said! This is my version of a horse. Lol. Thanks for watching and you have a great weekend too!

[@lyndarandall211]

Great job Dave. Can't wait to see it in use camping. Wonderful video. Thank you. 😊

[@Reallybigmonkey1]

Thanks Lynda, Im glad you liked it. As soon as this heat wave subsides Ill be hitting the trail! Thanks for watching

[@flatlander6928]

Great, this came at a time I started riding again, 70 yrs yung. I was wondering how to incorporate bushcrafting into mtb riding. I was leaning toward bags and carrying just essentials for overnighter. Excellent job on the bike resto, and incredible trailer build. Got me wanting a welder now. Keep em comin brother.

[@Reallybigmonkey1]

Thanks, I'm glad you liked it. With a welder what you can build is endless! Thanks for watching

[@asmith7876]

Genius combined with supreme skill = Dave!

[@Reallybigmonkey1]

Thanks!

[@thevirginiabushcrafter8833]

Damn, Dave, you are "GOOD". That is so awesome. If I had that I could ride from Virginia to Texas and that would be a beautiful, at least a month excursion. And that is better than a vehicle in a SHFT situation. Thanks for Sharing. Stay Safe.

[@Reallybigmonkey1]

Thanks, Im glad you liked it that much! Pedal power, no gas, room for food. I could see a month long trip possible! Thanks for watching

[@Traderjoe]

What’s good about this is that, let’s say you and Nick were out backpacking and trail riding and either you or he gets really badly hurt and the only way out is to put you in the cart and pedal out of there. In that case the cart becomes like an ambulance and it would need to be sized to fit a man. I know it won’t be comfortable, but opposed to leaving a man behind to look for help, it’s a valid option

[@Reallybigmonkey1]

I never even thought about that but you have a very valid point!

[@samgasaway8894]

That's really a neat setup. Your shop sort of looks as cluttered as my storage building/woworkshop. I've been down since your last video. Had massive heartattack 😮..but doing ok now. Keep up the good work.

[@Reallybigmonkey1]

Thanks Sam, Im glad you liked it. Lol, when I was younger I kept the shop spotless. Now I just shovel stuff to the side. Lol. Sorry to hear about the heart attack. I hope you get all better and back to feeling good.Thanks for watching Sam

[@woodchuck243]

Another great video love the build cant wait to see it in action

[@Reallybigmonkey1]

Thanks, Im glad you liked it. As soon as this heat wave breaks Ill do an overnighter. Thanks for watching

[@AirstripBum]

Thanks for the video Dave! See you next time.

[@Reallybigmonkey1]

You are very welcome and Im glad you liked it. Thanks for watching

[@scp8439]

I was almost running late for work Then, I saw the new video. Guess what? LOL. I'll get there when I get there. Outstanding build and show !

[@Reallybigmonkey1]

Lol, I'm sorry it made you late but thanks for watching my friend!

[@Williamleo71]

Nice! Pretty slick rig. Would be good for hunting on land where motorized vehicles aren't allowed. Very cool! Thanks for sharing the video

[@pauldeacy9989]

Spectacular is the perfect word! I'm seeing a true off grid system in the making.

[@Reallybigmonkey1]

Thank you Paul! I'm glad you liked it brother

[@barrybrum]

Hey, Dave, very interesting system. I suggest you add a kit of J-B Weld Kwikweld to your repair kit. The Kwikweld sets in only 6 minutes, is steel reinforced and waterproof. Also bring along a roll of Gorilla brand duct tape, their small roll is called "Mini Duct Tape to-Go", 1" x 10 yd Travel Size. A selection of various size zip-ties are often quite useful as well. You can fix just about any unexpected issues with those three items. I keep them in my backpacking and camping gear, as well as in my Get-Home-Bag. Enjoy your rig.

[@Reallybigmonkey1]

Now thats a great idea Barry! I hadnt thought of that.

[@jeffrichards5106]

Fantastic job on Frankenstein-ing those bikes together and the trailer, Dave! Amazing, I like your Rambo t-shirt too! Well done brother. 👍🏻👍🏻🚵

[@Reallybigmonkey1]

Thanks Jeff, Im glad you liked it all! Thanks for watching

[@genenonya8458]

What a great shop, looks like mine!

[@Reallybigmonkey1]

Thanks, Im glad you liked it. I spend a lot of time out there!

[@ColinNew-pf5ix]

Another idea for the floor, and possibly the sides Dave would be to use Corex sheeting. It's that corrugated/honeycomb sheeting they use to protect flooring, or estate (property) agents use it for their FOR SALE signage. If you were to use the stiffer one. Use could also use them for emergency ground insulation if you needed (to stop conduction).

[@Reallybigmonkey1]

Another cool idea!

[@mixmediaproductions]

Great work my man ! West point lake has riding to do.

[@Reallybigmonkey1]

Thanks, Im glad you liked it. I need to visit there!

[@adventurersclub1]

It turned out great, cant belive this was all made from a couple of old chairs. I'm looking forward to seeing what adventures you have with your new bike. 🚲⛺👍

[@Reallybigmonkey1]

@@adventurersclub1 Thanks, I'm glad you liked it. I'm overjoyed at how well it turned out considering what junk I started with. Lol. After this heatwave subsides I'll be using this set up a lot. Thanks for watching my friend

[@nrpoindexter]

Dave, you never cease to amaze me with the ingenuity you put into your projects. The bike / trailer idea has alway been great. But to take a junker bike and yard chairs. I just say WOW! I love watching all your videos. Both entertaining and educational. Love it!

[@Reallybigmonkey1]

I'm glad you liked it and nothing is junk in my opinion. It's all raw materials for a project once it's taken apart! Lol. Thanks for watching

[@jerrydavis5934]

Great job !

[@Reallybigmonkey1]

Thanks Jerry!

[@steamyb2]

Really cool but use caution in deer season! Only weak part I see is the plates that the axles bolt to, those need a gusset to reinforce them. When loaded, that's a lot of weight very thin tubing. Awesome build and thanks for the videos!

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Lol, I stay out of the woods during deer season. I hit the rivers. Those plates are 1/8 inch thick welded to the .040 tubing. Im hoping that with the outer braces sharing the weight and the slight shock absorption of the tires it'll hold but time will tell. Thanks for watching Steven.

[@Supertech-86]

Good stuff.

[@Reallybigmonkey1]

Thanks!

[@krielkip]

Awsome, Dave, just Awsome. Loved every second of how you developed this, starting from the first thought: "it has to be able to carry my army-kod" to the second step: "Which trash(treasure) do I have that fits the idea" and look what came out... man what a Nice combo !!! Next to that I love to see someone thatkinda feels like a 'twin', that means a lot to someone who has always felt to be different. Your shop looks like my house 😅and I'm on the same project! my bike is in the livingroom, I'm restoring it and working on the trailer aswell. So for me extra good fun this video and I'm happy for you your design came together 💐 Have a good weekend Dave and family !

[@Reallybigmonkey1]

Thanks, Im glad you liked it and you get me! A lot of folks say just go buy an E bike. Im cheap and like to DIY out of free junk. Labor is really cheap! Lol. Thanks for watching and you have a great weekend too!

[@krielkip]

@@Reallybigmonkey1 Yes. 😘

[@CHARGERDON55]

Great video!

[@Reallybigmonkey1]

Thank you Don!

[@WayneTheSeine]

Outstanding. The bike is freaking awesome and the trailer is so cool. In the event you needed to change out the bottom or if you wanted to put in some sideboards, black corrugated plastic like for political signs would work great and weigh nothing. That could trailer is a game-changer for long outings too. You could bring an inverter, LiPo4 batteries, portable solar panels, a diesel parking heater in the winter or fans in the summer, fishing gear, a small kayak....hardly any limit on what you can do with that. It is fine just like it is. Placing the tools in the bag for rigidity was a genius idea.

[@Reallybigmonkey1]

Thanks, Im glad you liked it and those are some great ideas! With how its built I can try multiple new additions. I also thought about carrying my raft or inflatable kayak with this. Thanks for watching

[@venturabushcraft5916]

The more you know, the more you can carry. Great bushcraft bike build Dave. 👍

[@Reallybigmonkey1]

Lol, how true! In survival the more you know the less you carry. In camping the more you carry the more comfortable youll be! Im glad you liked it. Thanks for watching

[@venturabushcraft5916]

@@Reallybigmonkey1 also with the trailer, the load should be heavier in the front I think, to prevent the trailer from swaying too much. Happy trails buddy.

[@Reallybigmonkey1]

@@venturabushcraft5916 That's with trailers on the road. I'll be going at a snails pace on a dirt trail so yawing or wandering shouldn't be a problem. And I really don't want excessive down pressure on my hitch

[@davidburgess6128]

Awsome build well done.

[@Reallybigmonkey1]

Thanks, Im glad you liked it David!

[@runningriverbushcraft]

Dave was totally an awesome job!! It's definitely cool looking.

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Thanks for watching

[@mbarr1029]

Nailed it on this one Dave. Great project.

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Thanks for watching

[@beerhunter272]

Hey Dave. Nice rig! Great color choice and good call on the 21 speed. Love the Rambo shirt as well! I suspect, however, that the weight of the cargo will rub holes in the floor material from the tools. What if you had a MOLLE system on the walls? Then you could attach your tools for easy access. I remember your previous project. What if you did the same here and make a removable dinner table/work bench as a floor? Also, It might be better to have an enclosed trailer. That way you can collect things like firewood, bark, twigs, fireplace rocks etc., without anything falling out. Then a waterproof cover (fabric) will keep your gear dry and clean. If you had to pack up in a hurry due to a flash flood, fire etc , you could simply pile everything in and go. I understand your point about using the exposed frame for your bungees, but you could also weld on loops for them. What about using the available space on the bike frame for your machete/large knife? Having a self defense tool handy wouldn't be a bad idea. Thanks for the great video. I'm sure you'll have a blast with your latest creation!

[@Reallybigmonkey1]

Thanks, Im glad you liked it and all good ideas! I may make a solid floor later on to attach with wing nuts. I also thought about a heavy canvas bag liner. I hadnt thought of the molle but thats a good idea. With the addition of sticks this could be a table. Stand it upright and it could be shelves or maybe even a ladder! Thanks for watching

[@1leg956]

Love it bigmonkey peace and love from 1 leg uk England

[@Reallybigmonkey1]

Thanks! I'm glad you liked it

[@brushbum7508]

Well another Friday night, but another great video from you to keep me entertained. TAKE CARE..

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Thanks for watching

[@sleepyaxolotl2]

your designs and engineering is spectacular. look forward to seeing more. you could start a whole industry with this stuff!

[@Reallybigmonkey1]

Thanks, I'm glad you liked it! If I had a huge financial backing I'd go into production with all my gear. Thanks for watching

[@TressaZimmerman]

You are so freaking smart Dave. Very ingenious idea. Great video Dave

[@Reallybigmonkey1]

Thanks Tressa!

[@tikkidaddy]

Love your shirt brother. It speaks volumes, especially during the 4th of July week. There was a 75 year old USN veteran here in TN who lost his drivers license recently because DMV said he was not a US citizen. Breaks my heart. I was not able to serve and guys like that took my place and did what I can't and this is how we treat them😥

[@Reallybigmonkey1]

Thanks, Im glad you liked it. That movie did showcase how vets were treated. Unfortunately they still aren't treated as good as they should be.

[@michellehiggs60]

We love watching you make things. That is an awesome piece of kit you have there. 👍🏼👍🏼👍🏼😁😄😄😄😄😄

[@Reallybigmonkey1]

Thanks Michelle, Im glad you liked it. Thanks for watching

[@randybeeson3424]

Great idea Dave! The real test would be to ride Nick around on it for a while. Any overnighters planned with it? I'm sure that would be around November😂

[@Reallybigmonkey1]

Thanks, Im glad you liked it Randy! Lol, I need to get him to lay in it. Im waiting on a break in this heat wave to go on an overnighter with it. Thanks for watching

[@roscoexparfield4319]

Thank you David! I just had a hip replacement. I watched you when you had your little trailer with your bicycle. I learned something from you. My first camp is going to be with an e scooter and a backpack. I just turned 65.

[@Reallybigmonkey1]

You are very welcome and an e bike sounds perfect! For now I'm stuck with pedal power. Lol. Thanks for watching

[@tanjarott7535]

Delightful of a video as ever, Dave!! I think it turned out fabulous. You did a great job. I just love how creative you are and how you use your talents. I hope you have a great time with your new rig.

[@Reallybigmonkey1]

Thanks Tanja! I'm glad you liked it. Oh I'll definitely have a lot of fun with this one!

[@YaknTackle]

Dave you are undoubtedly a master of repurpose....well done!!!

[@Reallybigmonkey1]

Nothing is trash in my eyes, its all materials! Lol. Thanks for watching!

[@azhomeboy2000]

Necessity is the mother of all invention as they say. Thanks for bringing us along.

[@Reallybigmonkey1]

Absolutely! Thanks for watching

[@kenshaddix-fz4hw]

This is great !! I just love your bike and trailer. Excellent idea of using the old folding chairs. Color is my favorite. I like your shop, just like mine, I know where everything is. Keep up the good work.

[@Reallybigmonkey1]

Thanks Ken, Im glad you liked it all Brother! Thanks for watching

[@HAWKLIN75]

Good morning sir. I love your vision and design. It looks like it will work out pretty well. Thank you for sharing your videos. Keep em coming.

[@Reallybigmonkey1]

Good morning and Im glad you liked it. Thanks for watching Hawk

[@JohnBlair-p2z]

Hi Dave, just one more thing, if you adjust your seat height so that your leg is almost ( with a slight bend) straight when your foot is on the peddle at its most downward stroke, you will find pedalling the bike way easier on the old legs. Having the seat too low makes you use too much energy wasted energy to propel the bike forward. Hope that helps.

[@Reallybigmonkey1]

Yes, I know about that rule of thumb. I didn't have any seat posts that was taller. I'll have to find one or make one

[@forendetta8164]

Woww awesome. Good job rambo😅😉🫡

[@Reallybigmonkey1]

Thanks! I'm glad you liked it

[@redsorgum]

I hope you had a great Independence Day. That trailer looks awesome. And yes, you need to keep an eye on the hitch. Definitely keep some room for a folding solar panel. It looks like you have enough room for getting a job as an Uber eats delivery driver……🤪😘✌️🇺🇸

[@Reallybigmonkey1]

Thanks, We had a fun but very very hot independence day! Im glad you liked it. I made that hitch bolt on in case it doesnt work or last. Time will tell. Thanks for watching

[@derekneumann]

Awesome fab, as always! Looks like a lot of fun to be had in the woods!

[@Reallybigmonkey1]

Thanks Derek, Im glad you liked it. Oh this is definitely going to be fun! Thanks for watching

[@tarrantcountykid]

Looks great Dave! Tell Nick 👋 hi

[@Reallybigmonkey1]

I'm glad you liked it and Nick says Heeyoo!

[@terrysmith4465]

Awesome thanks for sharing 👍

[@Reallybigmonkey1]

Thanks Terry, Im glad you liked it.

[@Keepmelevel]

Outstanding Dave! I like it. 👍🏽😎

[@Reallybigmonkey1]

Thanks, Im glad you liked it.

[@REB65]

👍👍 Very awesome Dave, great job! God bless y’all 🙏✌️

[@Reallybigmonkey1]

Thanks, I'm glad you liked it and may God bless you too!

[@garywhelansr5602]

Hey Dave that turned out great. One mans trash is another mans treasure is my believe😂👍🏻👍🏻

[@Reallybigmonkey1]

Thanks Gary and I agree!

[@garywhelansr5602]

@@Reallybigmonkey1 Welcome Dave👍🏻

[@andreafedrighi495]

Great job, thank you from Italy for sharing your project !

[@Reallybigmonkey1]

Thanks, Im glad you liked it and Im always happy to share, Thanks for watching

[@smoke5620]

I like it when someone can make something from nothing. Nice looking and a beautiful job…good design. You take care of yourself and a great video!!

[@Reallybigmonkey1]

I agree! I love creating something nice out of cheap free junk! Im glad you liked it. Thanks for watching

[@ColinNew-pf5ix]

Brilliant Dave. Well done ol' bean. The king of outdoorsman ingenuity. You had a vision and with your tenacity you saw it through to a success. I'm pleased for you that you're happy with it - deservedly so. Two things I learned in this video: that you can get extra thick bicycle tyre liners. And trailers need two bike stands Terrific video

[@Reallybigmonkey1]

Thanks Colin, Im glad you liked it and learned from it! Thanks for watching my friend

[@bryanfaulkenburg462]

I'm sure you have already thought about frame mounted water bottle handle bar bag and rear tire bike rack . One of those bike headlights may be cool, too. Good proof of concept.

[@Reallybigmonkey1]

Yes, I have a water bottle carrier and three bike bags. I looked at a rear over the tire rack and cant figure out how to mount on just yet.

[@Supertech-86]

That floor fan you have I've got one like it. That thing was always in the way and underfoot so I built a new bracket with swivel joint and a heavy duty articulating wall bracket like they have for tv's. Now if its smokey from welding I can point it at the man door extricate the smoke in a couple min, working on a hot engine gets pinpoint cooling and exhaust blown out the garage door, hot and sweaty from yard work, fan feels great on the back of the neck.

[@Reallybigmonkey1]

I just move mine around because I cant have it blowing away my argon while tig welding. I just aim it at my legs and feet then. Lol.

[@Supertech-86]

@@Reallybigmonkey1 just switch it off while welding.

[@razorsharpbt124]

That setup looks great, Dave! I think you did a great job! Love the shirt too! Have a great weekend, buddy!

[@Reallybigmonkey1]

Thanks, Im glad you liked it all! Thanks for watching and you have a great weekend too!

[@garyherring2485]

Good job brother wow😊😊😊

[@Reallybigmonkey1]

Thank you Gary!

[@sovbo101]

Great job Dave! Hi Nick!

[@Reallybigmonkey1]

Thanks Steve! Im glad you liked it and Nick says hi! Thanks for watching

[@JoeOutdoors]

Pretty cool setup!! You could have several small cutouts like you find on folding army cots in a liner leaving the frame open for bungees's. Could use velcro to hold it to the frame between the cutout . . . ;>)

[@Reallybigmonkey1]

Thanks, Im glad you liked it. This is a work in progress so Ill remember that! Thanks for watching

[@fearthehoneybadger]

Looks good.

[@Reallybigmonkey1]

Thanks!

[@jammybap]

What about some taught chicken wire for the floor? That'd give you a lot of structure and lashing points for very little weight

[@Reallybigmonkey1]

I never thought about that, good idea!

[@mangojack1]

Turned out awesome Dave! Great job 👍

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Thanks for watching

[@bobbybill1146]

Congratulations on another great project !

[@Reallybigmonkey1]

@@bobbybill1146 Thank you Bobby!

[@troymanning3150]

Another amazing video! Great build. Makes me want to redo an old bike in my shed. Thanks Dave!

[@Reallybigmonkey1]

Thanks Troy, I'm glad you liked it. Definitely redo that bike, it's very fun and you wind up with a one of a kind. Thanks for watching brother

[@WORRO]

I'm only saying this Brother Dave, 1st Class! Big Thumbs up ~John

[@Reallybigmonkey1]

Thank you Brother John!

[@baileydillion9331]

Love the new trailer design and the color is great. I have a couple thoughts. For the bag holding the tools on the bottom. The opening may pick up mud being in the front. Next the top of the trailer could make a great table frame if you made a canvas strap on cover. Of course not for a stove unless you did carry a piece of metal. Next have you tried adjusting the height of the seat? Sometime that simple thing will make an amazing difference. Thanks for sharing the steps you took to create this video it really shows how much thought and effort you put in. Peace, Love and Freedom 🇺🇲

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Hopefully that 8 inches of under fold wont pick up mud but, time will tell. I thought about setting sticks on the trailer as a table or sitting it upright with sticks as a shelf! I am maxed out on seat post height and need a taller one.Thanks for watching

[@baileydillion9331]

@@Reallybigmonkey1 keep having fun and 🚲

[@thekitowl]

Nice build Dave, looks awesome.

[@Reallybigmonkey1]

Thanks, I'm glad you liked it my friend

[@bobjones9727]

Great video. Really nice build make from repurposed material. I'm impressed.

[@Reallybigmonkey1]

Thanks Bob, Im glad you liked it. Thanks for watching

[@outdoorchilled7032]

Great job Dave.....❤ from Barcelona 🇪🇦

[@Reallybigmonkey1]

Thanks and greetings from Georgia in the USA!

[@aaronmullinz]

Dave, just freaking cool man! Nothing more I can really say that others haven’t already said. Freaking Cool!

[@Reallybigmonkey1]

Thanks Aaron, Im glad you liked it that much! Thanks for watching

[@pueblodove]

It's a masterpiece Dave!

[@Reallybigmonkey1]

Thanks!

[@pueblodove]

@@Reallybigmonkey1 💜

[@SonofChurchill]

Great build, can't wait for next adventure with bike

[@Reallybigmonkey1]

Thanks, Im glad you liked it. Thanks for watching

[@edwinklaver]

Love it! If you start right now, you can have mine built by Christmas! Heck! Heck! I'll even come and pick it up! Great job Dave.

[@Reallybigmonkey1]

I'm glad you liked it brother but I'm not Santa Claus, lol. Thanks for watching Edwin

[@edwinklaver]

@@Reallybigmonkey1 Can't blame me for trying. I don't even have a bike, but if I could talk you out of one of your trailers. I'd have to go buy one. lmao Your fabricating skills and the way you adapt, and make your own gear, is why folks always come back. No other bushcrafter has that. You're still the man Dave.

[@Reallybigmonkey1]

@@edwinklaver Thank you Edwin!

[@richschwartz8004]

Since you made the trailer to haul your army cot and you have tubing left it wouldn't take much to make removable tubing brace/ bracket to hold the cot. You could even use a threaded rod with a flat plate welded on the bottom as stabilizers on the corners. Not sure if your cot has the brackets for the mosquito netting poles or if you'd need to add something. You could almost have a little camper. Sorry for rambling on again but your videos always gets these rusty old gears turning again. With all that said i love what you made. Thank you so much for sharing your ingenuity and building skills with us. God bless and stay safe.

[@Reallybigmonkey1]

Thanks Rich, I'm glad you liked it and thanks for the ideas. With it built like it is I can easily experiment with other additions. Thanks for watching and may God bless you too brother

[@marianfrances4959]

Woo hoo! Dave's bike and trailer building! Awesome shop. Hope all's well in your world. Love your videos. 👍😎🇨🇦 Love the bike. Love the lucky shirt! I have two: one with Tom Petty and the Heart Breaker's logo, the other is of a Grizzly Bear.😅

[@Reallybigmonkey1]

Thanks Marian! Im glad you liked it and all is well here! Other than this extreme heat and humidity thats killing our outdoor fun! Thanks for watching

[@remjax1]

Love your ideas and watching it come together. I do think I would have attached the straps to the front so it is easier to access the internal bag. I think it cries out for an ebike to pull it and you have plenty of space for extra batteries and even a solar cell. Mokwheel makes an inverter/ solar charger for their bikes as an idea. Either way Love it and thanks for sharing

[@Reallybigmonkey1]

Thanks, Im glad you liked it. I figured the opening would be better in the back due to the length of the axe and saw. Electric conversion may happen one day.Thanks for watching

[@W3ASR]

Great job! I enjoy watching you build things from scratch. I look forward to you using the bike/trailer on one of your future adventures.

[@Reallybigmonkey1]

Thanks, I'm glad you liked it. This is definitely going to make my Fall and winter camping much more fun! Thanks for watching